Centos7下編譯安裝Nginx、Mysql、PHP（文章底部包含一鍵安裝腳本）

時間 2019-11-07

標籤 centos7 centos 編譯安裝 nginx mysql php 文章底部包含一鍵腳本欄目 Tomcat 简体版

原文原文鏈接

實現環境

Centos 7 64位
IP地址：172.16.0.20 Nginx：1.12.0 Mysql：5.7.18 PHP：7.1.4 yum源：aliyun源php

若是你的系統是新安裝的redhat 7或 Centos 7 ，可使用個人一鍵優化腳本優化系統，有利於系統的使用和下面的安裝。點擊我查看

首先下載好咱們的須要的包

建立一個目錄存放下載的軟件html

[root@localhost ~]# mkdir /software
[root@localhost ~]# cd /software/
複製代碼

軟件下載地址 這是個人網盤連接或者去它們各自的官網下載最新版，下載命令參考mysql

wget https://cdn.mysql.com//Downloads/MySQL-5.7/mysql-boost-5.7.18.tar.gz
wget https://sourceforge.net/projects/pcre/files/pcre/8.40/pcre-8.40.tar.gz
wget http://nginx.org/download/nginx-1.12.0.tar.gz
wget http://hk1.php.net/distributions/php-7.1.4.tar.gz
複製代碼

這是須要的包linux

[root@localhost software]# ll
總用量 757804

-rw-r--r--   1 root root   61612105 4月  18 14:55 mysql-boost-5.7.18.tar.gz
-rw-r--r--.  1 root root     980831 4月  14 17:08 nginx-1.12.0.tar.gz
-rw-r--r--   1 root root  20319716 4月  18 15:41 php-7.1.4.tar.gz
複製代碼

關閉系統限制 關閉系統防火牆nginx

[root@localhost software]# systemctl stop firewalld.service 
[root@localhost software]# systemctl disable firewalld.service 
複製代碼

關閉SElinuxc++

[root@localhost software]# sed -i 's/SELINUX=enforcing/SELINUX=disabled/' /etc/selinux/config
[root@localhost software]# setenforce 0
複製代碼

開始安裝nginx

建立www帳戶用來啓動nginxweb

[root@localhost software]# useradd www -s /sbin/nologin 
複製代碼

安裝依賴的包sql

[root@localhost software]# yum -y install pcre pcre-devel zlib zlib-devel gcc-c++ gcc openssl*
複製代碼

解壓Nginx源碼包數據庫

root@localhost software]# tar zxvf nginx-1.12.0.tar.gz 
複製代碼

進入解壓後的目錄，對Nginx進行配置json

[root@localhost software]# cd nginx-1.12.0/
[root@localhost nginx-1.12.0]# ./configure --user=www --group=www --prefix=/usr/local/nginx --with-http_realip_module --with-http_sub_module --with-http_gzip_static_module --with-http_stub_status_module --with-pcre
複製代碼

編譯和安裝

[root@localhost nginx-1.12.0]# make && make install
複製代碼

啓動Nginx

[root@localhost nginx-1.12.0]# /usr/local/nginx/sbin/nginx
複製代碼

瀏覽器訪問測試是否ok

關閉Nginx進程

[root@localhost nginx-1.12.0]# killall nginx
[root@localhost nginx-1.12.0]# ps -ef|grep nginx
複製代碼

nginx命令作軟鏈接方便使用

[root@localhost nginx-1.12.0]# ln -s /usr/local/nginx/sbin/nginx /sbin/nginx
複製代碼

編寫nginx啓動腳本

cat >> /usr/lib/systemd/system/nginx.service << EOF
[Unit]
Description=nginx - high performance web server
Documentation=http://nginx.org/en/docs/
After=network-online.target remote-fs.target nss-lookup.target
 
[Service]
Type=forking
PIDFile=/usr/local/nginx/logs/nginx.pid
ExecStartPre=/usr/sbin/nginx -t
ExecStart=/usr/sbin/nginx
ExecReload=//usr/sbin/nginx -s reload
ExecStop=/usr/sbin/nginx -s stop
PrivateTmp=true
 
[Install]
WantedBy=multi-user.target
EOF
複製代碼

修改完systemctl服務，須要從新加載下daemon

[root@localhost nginx-1.12.0]# systemctl daemon-reload 
複製代碼

用systemctl啓動Nginx服務，並查看狀態

[root@localhost nginx-1.12.0]# systemctl start nginx
[root@localhost nginx-1.12.0]# systemctl status nginx
● nginx.service - nginx - high performance web server
   Loaded: loaded (/usr/lib/systemd/system/nginx.service; enabled; vendor preset: disabled)
   Active: active (running) since 二 2017-04-18 14:06:58 CST; 8s ago
     Docs: http://nginx.org/en/docs/
  Process: 11816 ExecStart=/usr/sbin/nginx (code=exited, status=0/SUCCESS)
  Process: 11813 ExecStartPre=/usr/sbin/nginx -t (code=exited, status=0/SUCCESS)
 Main PID: 11818 (nginx)
   CGroup: /system.slice/nginx.service
           ├─11818 nginx: master process /usr/sbin/nginx
           └─11820 nginx: worker process

4月 18 14:06:58 localhost.localdomain systemd[1]: Starting nginx - high performance web server...
4月 18 14:06:58 localhost.localdomain nginx[11813]: nginx: the configuration file /usr/local/nginx/conf/nginx...s ok
4月 18 14:06:58 localhost.localdomain nginx[11813]: nginx: configuration file /usr/local/nginx/conf/nginx.con...sful
4月 18 14:06:58 localhost.localdomain systemd[1]: Failed to read PID from file /usr/local/nginx/logs/nginx.pi...ment
4月 18 14:06:58 localhost.localdomain systemd[1]: Started nginx - high performance web server.
複製代碼

設置nginx開機啓動

[root@localhost nginx-1.12.0]# systemctl enable nginx
複製代碼

nginx安裝完成，下面安裝mysql

#### 安裝MySQL 安裝依賴包 ``` [root@localhost nginx-1.12.0]# cd /software/ [root@localhost software]# yum -y install ncurses ncurses-devel bison cmake gcc gcc-c++ ```

建立用戶和組

[root@localhost software]# groupadd mysql
[root@localhost software]# useradd -s /sbin/nologin -g mysql mysql -M
[root@localhost software]# id mysql
複製代碼

解壓mysql源碼包

[root@localhost software]# tar zxvf mysql-boost-5.7.18.tar.gz 
複製代碼

進入解壓後的目錄，對mysql進行配置（5.5以上都是cmake）

[root@localhost software]# cd mysql-5.7.18/
[root@localhost mysql-5.7.18]# cmake . -DCMAKE_INSTALL_PREFIX=/usr/local/mysql -DMYSQL_UNIX_ADDR=/usr/local/mysql/mysql.sock -DSYSCONFDIR=/usr/local/mysql/etc -DSYSTEMD_PID_DIR=/usr/local/mysql -DDEFAULT_CHARSET=utf8 -DDEFAULT_COLLATION=utf8_general_ci -DWITH_INNOBASE_STORAGE_ENGINE=1 -DWITH_ARCHIVE_STORAGE_ENGINE=1 -DWITH_BLACKHOLE_STORAGE_ENGINE=1 -DWITH_PERFSCHEMA_STORAGE_ENGINE=1 -DMYSQL_DATADIR=/usr/local/mysql/data -DWITH_BOOST=boost -DWITH_SYSTEMD=1
複製代碼

記住這個/usr/local/mysql/mysql.sock，php鏈接mysql會用到。

編譯和安裝

[root@localhost mysql-5.7.18]# make && make install
複製代碼

初始化數據庫及啓動

[root@localhost mysql-5.7.18]# chown -R mysql.mysql /usr/local/mysql/
[root@localhost mysql-5.7.18]# cd /usr/local/mysql/
複製代碼

cat >> my.cnf << EOF
[client]
port = 3306
default-character-set=utf8
socket = /usr/local/mysql/mysql.sock
 
[mysql]
port = 3306
default-character-set=utf8
socket = /usr/local/mysql/mysql.sock

[mysqld]
user = mysql
basedir = /usr/local/mysql
datadir = /usr/local/mysql/data
port = 3306
default-character-set=utf8
pid-file = /usr/local/mysql/mysqld.pid
socket = /usr/local/mysql/mysql.sock
server-id = 1

# Remove leading # to set options mainly useful for reporting servers.
# The server defaults are faster for transactions and fast SELECTs.
# Adjust sizes as needed, experiment to find the optimal values.
# join_buffer_size = 128M
# sort_buffer_size = 2M
# read_rnd_buffer_size = 2M 

sql_mode=NO_ENGINE_SUBSTITUTION,STRICT_TRANS_TABLES
EOF
複製代碼

[root@localhost mysql]# chown mysql.mysql my.cnf
[root@localhost mysql]# echo 'PATH=/usr/local/mysql/bin:/usr/local/mysql/lib:$PATH' >> /etc/profile
[root@localhost mysql]# echo 'export PATH' >> /etc/profile
[root@localhost mysql]# source /etc/profile
[root@localhost mysql]# bin/mysqld --initialize-insecure --user=mysql --basedir=/usr/local/mysql --datadir=/usr/local/mysql/data
[root@localhost mysql]# cp usr/lib/systemd/system/mysqld.service /usr/lib/systemd/system/
[root@localhost mysql]# systemctl daemon-reload 
[root@localhost mysql]# systemctl start mysqld
[root@localhost data]# ps -ef|grep mysql
複製代碼

設置mysql開機啓動

[root@localhost mysql]# systemctl enable mysqld
複製代碼

查看Mysql啓動狀態

[root@localhost mysql]# systemctl status mysqld
● mysqld.service - MySQL Server
   Loaded: loaded (/usr/lib/systemd/system/mysqld.service; disabled; vendor preset: disabled)
   Active: active (running) since 三 2017-04-19 10:48:20 CST; 25min ago
     Docs: man:mysqld(8)
           http://dev.mysql.com/doc/refman/en/using-systemd.html
  Process: 12734 ExecStart=/usr/local/mysql/bin/mysqld --daemonize --pid-file=/usr/local/mysql/mysqld.pid $MYSQLD_OPTS (code=exited, status=0/SUCCESS)
  Process: 12714 ExecStartPre=/usr/local/mysql/bin/mysqld_pre_systemd (code=exited, status=0/SUCCESS)
 Main PID: 12737 (mysqld)
   CGroup: /system.slice/mysqld.service
           └─12737 /usr/local/mysql/bin/mysqld --daemonize --pid-file=/usr/local/mysql/mysqld.pid

4月 19 10:48:20 localhost.localdomain mysqld[12734]: 2017-04-19T02:48:20.943096Z 0 [Note] Server hostname (bi...3306
4月 19 10:48:20 localhost.localdomain mysqld[12734]: 2017-04-19T02:48:20.943247Z 0 [Note] IPv6 is available.
4月 19 10:48:20 localhost.localdomain mysqld[12734]: 2017-04-19T02:48:20.943354Z 0 [Note]   - '::' resolves to '::';
4月 19 10:48:20 localhost.localdomain mysqld[12734]: 2017-04-19T02:48:20.943397Z 0 [Note] Server socket creat...::'. 4月 19 10:48:20 localhost.localdomain mysqld[12734]: 2017-04-19T02:48:20.966965Z 0 [Note] Event Scheduler: Lo...ents 4月 19 10:48:20 localhost.localdomain mysqld[12734]: 2017-04-19T02:48:20.967379Z 0 [Note] /usr/local/mysql/bi...ons. 4月 19 10:48:20 localhost.localdomain mysqld[12734]: Version: '5.7.18' socket: '/usr/local/mysql/mysql.sock'...tion 4月 19 10:48:20 localhost.localdomain mysqld[12734]: 2017-04-19T02:48:20.967402Z 0 [Note] Executing 'SELECT *...eck.
4月 19 10:48:20 localhost.localdomain mysqld[12734]: 2017-04-19T02:48:20.967409Z 0 [Note] Beginning of list o...bles
4月 19 10:48:20 localhost.localdomain systemd[1]: Started MySQL Server.
複製代碼

進入數據庫，建立一個測試數據庫以及受權遠程用戶可訪問這個數據庫

[root@localhost mysql]# mysql
Welcome to the MySQL monitor.  Commands end with ; or \g.
Your MySQL connection id is 5
Server version: 5.7.18 Source distribution

Copyright (c) 2000, 2017, Oracle and/or its affiliates. All rights reserved.

Oracle is a registered trademark of Oracle Corporation and/or its
affiliates. Other names may be trademarks of their respective
owners.

Type 'help;' or '\h' for help. Type '\c' to clear the current input statement.

mysql> create database ceshi CHARACTER SET utf8  COLLATE utf8_general_ci;
Query OK, 1 row affected (0.00 sec)

mysql> grant all on ceshi.* to ceshi@'%' identified by 'ceshi2017';
Query OK, 0 rows affected, 1 warning (0.00 sec)

mysql> flush privileges;
Query OK, 0 rows affected (0.01 sec)

複製代碼

查看受權的用戶表

[root@localhost mysql]# mysql
Welcome to the MySQL monitor.  Commands end with ; or \g.
Server version: 5.7.18 Source distribution

Oracle is a registered trademark of Oracle Corporation and/or its
affiliates. Other names may be trademarks of their respective
owners.

Type 'help;' or '\h' for help. Type '\c' to clear the current input statement.

mysql> SELECT DISTINCT CONCAT('User: ''',user,'''@''',host,''';') AS query FROM mysql.user;
+--------------------------------+
| query                          |
+--------------------------------+
| User: 'ceshi'@'%';             |
| User: 'mysql.sys'@'localhost'; |
| User: 'root'@'localhost';      |
+--------------------------------+
3 rows in set (0.00 sec)

複製代碼

在別的機器鏈接172.16.0.20的ceshi數據庫

[root@localhost ~]# mysql -h172.16.0.20 -uceshi -p'ceshi2017'
mysql: [Warning] Using a password on the command line interface can be insecure.
Welcome to the MySQL monitor.  Commands end with ; or \g.
Your MySQL connection id is 11
Server version: 5.7.18 Source distribution

Copyright (c) 2000, 2017, Oracle and/or its affiliates. All rights reserved.

Oracle is a registered trademark of Oracle Corporation and/or its
affiliates. Other names may be trademarks of their respective
owners.

Type 'help;' or '\h' for help. Type '\c' to clear the current input statement.

mysql> show databases;
+--------------------+
| Database           |
+--------------------+
| information_schema |
| ceshi              |
+--------------------+
2 rows in set (0.00 sec)
複製代碼

***

PHP 7 安裝

PHP 7 在15年年末推出，PHP官方說的比 PHP 5 快2倍，就爲這個，這個鮮必須嘗。不過有個很值得注意的地方是，雖然 PHP 7 增長了很多新特性，但也不少地方是向後不兼容的，例如 mysql 擴展，在 PHP 7 中已經被刪除。如今最新版本是7.1.4。

進入software目錄

[root@localhost mysql]# cd /software/
複製代碼

接着解壓php源碼包

[root@localhost software]# tar zxvf php-7.1.4.tar.gz 
複製代碼

再進入解壓後的文件夾

[root@localhost software]# cd php-7.1.4/

複製代碼

這裏將只安裝一些經常使用的擴展，你們能夠根據本身的實際須要進行增減，能夠經過如下命令查看PHP安裝是具體有有些擴展和選項：

[root@localhost php-7.1.4]# ./configure --help
複製代碼

有接近300個選項。安裝以前要先安裝那些準備裝的擴展要用到的軟件模塊

[root@localhost php-7.1.4]# yum -y install libjpeg libjpeg-devel libpng libpng-devel freetype freetype-devel libxml2 libxml2-devel zlib zlib-devel curl curl-devel openssl openssl-devel

複製代碼

接下來 configure PHP 7

[root@localhost php-7.1.4]# ./configure --prefix=/usr/local/php --enable-fpm --with-fpm-user=nginx --with-fpm-group=nginx --with-mysqli --with-zlib --with-curl --with-gd --with-jpeg-dir --with-png-dir --with-freetype-dir --with-openssl --enable-mbstring --enable-xml --enable-session --enable-ftp --enable-pdo -enable-tokenizer --enable-zip
複製代碼

上面已經提到，PHP 7 已經刪除了 MySQL 擴展，因此 -with-mysql 再也不是一個有效的選項。這裏用 MySQLi 或 PDO 代替。其中 --prefix 是安裝目錄，上面提到在同一個服務器安裝多個 PHP 版本，這個 --prefix 設定是頗有必要的。至於其餘擴展你們按實際增減。若是 configure 成功的話，將會看到如下相似字樣：

+--------------------------------------------------------------------+
| License:                                                           |
| This software is subject to the PHP License, available in this     |
| distribution in the file LICENSE.  By continuing this installation |
| process, you are bound by the terms of this license agreement.     |
| If you do not agree with the terms of this license, you must abort |
| the installation process at this point.                            |
+--------------------------------------------------------------------+

Thank you for using PHP.
複製代碼

編譯和安裝

[root@localhost php-7.1.4]# make && make install
複製代碼

好，PHP 7 已經安裝完成，下面進行配置先是 PHP 的配置文檔

[root@localhost php-7.1.4]# cp php.ini-development /usr/local/php/lib/php.ini
複製代碼

php.ini 路徑應該放在 PREFIX/lib 文件夾，除非在安裝的時候經過這個選項修改 --with-config-file-path=PATH 若是安裝 PHP 時沒有指明 --prefix ，那麼就 php.ini 路徑就是 /usr/local/lib/php.ini 。剛纔安裝時有指明 --prefix ，因此是 /usr/local/php/lib/php.ini 而後根據實際本身須要修改 php.ini。查找 mysqli.default_socket，修改爲 mysqli.default_socket = /usr/local/mysql/mysql.sock：

[root@localhost php-7.1.4]# grep mysqli.default_socket /usr/local/php/lib/php.ini
mysqli.default_socket = 
[root@localhost php-7.1.4]# sed -i 's#mysqli.default_socket =#mysqli.default_socket = /usr/local/mysql/mysql.sock#' /usr/local/php/lib/php.ini
[root@localhost php-7.1.4]# grep mysqli.default_socket /usr/local/php/lib/php.ini
mysqli.default_socket = /usr/local/mysql/mysql.sock
複製代碼

其中 /usr/local/mysql/mysql.sock 就是上面安裝 MySQL 時提到的。這個值必須填，不然會出現以下錯誤： Warning: mysqli_connect(): (HY000/2002): No such file or directory

修改時區，查找 date.timezone，改爲（主要將前面的 ; 去掉，這個是註釋用的）：

root@localhost php-7.1.4]# grep date.timezone /usr/local/php/lib/php.ini 
; http://php.net/date.timezone
;date.timezone =
[root@localhost php-7.1.4]# sed -i 's#;date.timezone =#date.timezone = Asia/Shanghai#' /usr/local/php/lib/php.ini 
[root@localhost php-7.1.4]# grep date.timezone /usr/local/php/lib/php.ini 
; http://php.net/date.timezone
date.timezone = Asia/Shanghai
複製代碼

好了，PHP 7 已經安裝好，下面驗證一下

[root@localhost php-7.1.4]# /usr/local/php/bin/php -v
PHP 7.1.4 (cli) (built: Apr 17 2017 14:58:11) ( NTS )
Copyright (c) 1997-2017 The PHP Group
Zend Engine v3.1.0, Copyright (c) 1998-2017 Zend Technologies
複製代碼

再查看下已經安裝的模塊

[root@localhost php-7.1.4]# /usr/local/php/bin/php -m
[PHP Modules]
Core
ctype
curl
date
dom
fileinfo
filter
ftp
gd
hash
iconv
json
libxml
mbstring
mysqli
mysqlnd
openssl
pcre
PDO
pdo_sqlite
Phar
posix
Reflection
session
SimpleXML
SPL
sqlite3
standard
tokenizer
xml
xmlreader
xmlwriter
zip
zlib

[Zend Modules]

複製代碼

接下來配置 php-fpm，複製 php-fpm 的配置文檔

[root@localhost php-7.1.4]# cp /usr/local/php/etc/php-fpm.conf.default /usr/local/php/etc/php-fpm.conf
[root@localhost php-7.1.4]# cp /usr/local/php/etc/php-fpm.d/www.conf.default /usr/local/php/etc/php-fpm.d/www.conf
複製代碼

修改 /usr/local/php/etc/php-fpm.d/www.conf，把啓動用戶改成和nginx服務同一個啓動用戶（前面Nginx使用的是www帳戶，這裏改爲和Nginx使用同樣的帳戶；通常都是使用www用戶）

[root@localhost php-7.1.4]# grep -E 'user =|group =' /usr/local/php/etc/php-fpm.d/www.conf
user = nginx
group = nginx
[root@localhost php-7.1.4]# sed -i 's#user = nginx#user = www#' /usr/local/php/etc/php-fpm.d/www.conf
[root@localhost php-7.1.4]# sed -i 's#group = nginx#group = www#' /usr/local/php/etc/php-fpm.d/www.conf 
[root@localhost php-7.1.4]# grep -E 'user =|group =' /usr/local/php/etc/php-fpm.d/www.conf
user = www
group = www
;listen.group = www
複製代碼

其中 www.conf 中要留意這個值 listen = 127.0.0.1:9000

[root@localhost php-7.1.4]# grep 'listen = 127.0.0.1' /usr/local/php/etc/php-fpm.d/www.conf

複製代碼

這裏使用 9000 端口，這個選項在配置 Nginx 網站時要用到的。配置 php-fpm 啓動服務腳本

[root@localhost php-7.1.4]# cp sapi/fpm/php-fpm.service /usr/lib/systemd/system/
複製代碼

查看啓動腳本中指定的程序目錄和pid文件（默認已經修改過了，若是沒有修改過執行下面操做）

[root@localhost php-7.1.4]# grep -E 'PIDFile|ExecStart' /usr/lib/systemd/system/php-fpm.service
PIDFile=/usr/local/php/var/run/php-fpm.pid
ExecStart=/usr/local/php/sbin/php-fpm --nodaemonize --fpm-config /usr/local/php/etc/php-fpm.conf
複製代碼

修改啓動腳本，把裏邊 prefix 相關的內容用實際路徑代替

[root@localhost php-7.1.4]# vim /usr/lib/systemd/system/php-fpm.service
將
PIDFile=${prefix}/var/run/php-fpm.pid
ExecStart=${exec_prefix}/sbin/php-fpm --nodaemonize --fpm-config ${prefix}/etc/php-fpm.conf
修改爲
PIDFile=/usr/local/php/var/run/php-fpm.pid
ExecStart=/usr/local/php/sbin/php-fpm --nodaemonize --fpm-config /usr/local/php/etc/php-fpm.conf
複製代碼

從新載入 systemd

[root@localhost php-7.1.4]# systemctl daemon-reload

複製代碼

讓 php-fpm 隨機啓動

[root@localhost php-7.1.4]# systemctl enable php-fpm
Created symlink from /etc/systemd/system/multi-user.target.wants/php-fpm.service to /usr/lib/systemd/system/php-fpm.service.
複製代碼

當即啓動 php-fpm

[root@localhost php-7.1.4]# systemctl start php-fpm

複製代碼

查看狀態

[root@localhost php-7.1.4]# systemctl status php-fpm
● php-fpm.service - The PHP FastCGI Process Manager
   Loaded: loaded (/usr/lib/systemd/system/php-fpm.service; enabled; vendor preset: disabled)
   Active: active (running) since 一 2017-04-17 15:37:06 CST; 1min 9s ago
 Main PID: 55770 (php-fpm)
   CGroup: /system.slice/php-fpm.service
           ├─55770 php-fpm: master process (/usr/local/php/etc/php-fpm.conf)
           ├─55771 php-fpm: pool www
           └─55772 php-fpm: pool www

4月 17 15:37:06 localhost.localdomain systemd[1]: Started The PHP FastCGI Process Manager.
4月 17 15:37:06 localhost.localdomain systemd[1]: Starting The PHP FastCGI Process Manager...

複製代碼

好，php-fpm 已經成功啓動，那就當即建個網站看看

配置 Nginx 站點先創建一個 lnmp 站點，路徑是 /var/www/html

[root@localhost php-7.1.4]# mkdir -p /var/www/html
[root@localhost php-7.1.4]# chown -R www.www /var/www
複製代碼

並準備好 phpinfo 測試文件

cat >> /var/www/html/test.php << EOF
<?php
phpinfo();
EOF
複製代碼

建立一個 Nginx 配置文件放到 /usr/local/nginx/conf/conf.d 中

[root@localhost php-7.1.4]# cd /usr/local/nginx/conf
[root@localhost conf]# sed -i '$i\include /usr/local/nginx/conf/conf.d/*;' nginx.conf
[root@localhost conf]# cat nginx.conf
[root@localhost conf]# mkdir conf.d
[root@localhost conf]# cd conf.d/
複製代碼

建立test.com.conf文件並寫入如下內容

cat >> test.com.conf <<EOF
server {
    listen       81;
    server_name  localhost;
    root         /var/www/html;
    location / {
        index  index.php index.html index.htm;
    }
    location ~ \.php$ {
        fastcgi_pass   127.0.0.1:9000;
        fastcgi_index  index.php;
        fastcgi_param  SCRIPT_FILENAME    \$document_root\$fastcgi_script_name;
        fastcgi_param  PHP_VALUE          open_basedir=\$document_root:/tmp/:/proc/;
        include        fastcgi_params;
    }
}
EOF
複製代碼

其中 server_name localhost; 中的 localhost 改爲你本身的域名（例如：www.baidu.com，這裏我直接使用localhost和81端口來測試。網站域名解析默認都是使用80端口的）其中 root /var/www/html; 就是剛纔建立的站點目錄其中 fastcgi_pass 127.0.0.1:9000; 就是上面配置 php-fpm 提到要留意的值修改配置後必定要記得 reload nginx 才能生效

[root@localhost conf.d]# systemctl reload nginx
[root@localhost conf.d]# systemctl reload php-fpm
複製代碼

最後的配置（nginx服務器的IP必須和域名作解析，纔可使用域名訪問服務，域名購買通常在阿里雲上購買）這裏咱們直接使用IP:81訪問（由於咱們使用的端口是81；域名是localhost，也就是nginx所在主機IP的意思）

*** #### 建立一鍵安裝腳本one-click-install-lnmp.sh ``` #!/bin/sh # __author__ = 'junxi'

This script is used by fast installed lnmp ......

write by 2017/04/19

mkdir /software cd /software/ ll systemctl stop firewalld.service systemctl disable firewalld.service sed -i 's/SELINUX=enforcing/SELINUX=disabled/' /etc/selinux/config setenforce 0

######start install nginx###### echo '######start install nginx######' useradd www -s /sbin/nologin yum -y install pcre pcre-devel zlib zlib-devel gcc-c++ gcc openssl* tar zxvf nginx-1.12.0.tar.gz cd nginx-1.12.0/ ./configure --user=www --group=www --prefix=/usr/local/nginx --with-http_realip_module --with-http_sub_module --with-http_gzip_static_module --with-http_stub_status_module --with-pcre make && make install sleep 2 ln -s /usr/local/nginx/sbin/nginx /sbin/nginx cat >> /usr/lib/systemd/system/nginx.service << EOF [Unit] Description=nginx - high performance web server Documentation=http://nginx.org/en/docs/ After=network-online.target remote-fs.target nss-lookup.target

[Service] Type=forking PIDFile=/usr/local/nginx/logs/nginx.pid ExecStartPre=/usr/sbin/nginx -t ExecStart=/usr/sbin/nginx ExecReload=//usr/sbin/nginx -s reload ExecStop=/usr/sbin/nginx -s stop PrivateTmp=true

[Install] WantedBy=multi-user.target EOF systemctl daemon-reload systemctl start nginx systemctl enable nginx systemctl status nginx sleep 2 echo '######nginx is install completed done.######'

start install mysql

cd /software/ yum -y install ncurses ncurses-devel bison cmake gcc gcc-c++ groupadd mysql useradd -s /sbin/nologin -g mysql mysql -M id mysql chown -R mysql.mysql /usr/local/mysql tar zxvf mysql-boost-5.7.18.tar.gz cd mysql-5.7.18/ cmake . -DCMAKE_INSTALL_PREFIX=/usr/local/mysql -DMYSQL_UNIX_ADDR=/usr/local/mysql/mysql.sock -DSYSCONFDIR=/usr/local/mysql/etc -DSYSTEMD_PID_DIR=/usr/local/mysql -DDEFAULT_CHARSET=utf8 -DDEFAULT_COLLATION=utf8_general_ci -DWITH_INNOBASE_STORAGE_ENGINE=1 -DWITH_ARCHIVE_STORAGE_ENGINE=1 -DWITH_BLACKHOLE_STORAGE_ENGINE=1 -DWITH_PERFSCHEMA_STORAGE_ENGINE=1 -DMYSQL_DATADIR=/usr/local/mysql/data -DWITH_BOOST=boost -DWITH_SYSTEMD=1 sleep 1 make && make install sleep 2 chown -R mysql.mysql /usr/local/mysql/ cd /usr/local/mysql/ echo '######create my.cnf######' cat >> my.cnf << EOF [client] port = 3306 default-character-set=utf8 socket = /usr/local/mysql/mysql.sock

[mysql] port = 3306 default-character-set=utf8 socket = /usr/local/mysql/mysql.sock

[mysqld] user = mysql basedir = /usr/local/mysql datadir = /usr/local/mysql/data port = 3306 default-character-set=utf8 pid-file = /usr/local/mysql/mysqld.pid socket = /usr/local/mysql/mysql.sock server-id = 1

Remove leading # to set options mainly useful for reporting servers.

The server defaults are faster for transactions and fast SELECTs.

Adjust sizes as needed, experiment to find the optimal values.

join_buffer_size = 128M

sort_buffer_size = 2M

read_rnd_buffer_size = 2M

sql_mode=NO_ENGINE_SUBSTITUTION,STRICT_TRANS_TABLES EOF

chown mysql.mysql my.cnf echo 'PATH=/usr/local/mysql/bin:/usr/local/mysql/lib:$PATH' >> /etc/profile echo 'export PATH' >> /etc/profile source /etc/profile bin/mysqld --initialize-insecure --user=mysql --basedir=/usr/local/mysql --datadir=/usr/local/mysql/data cp usr/lib/systemd/system/mysqld.service /usr/lib/systemd/system/ systemctl daemon-reload systemctl start mysqld systemctl enable mysqld ps -ef|grep mysql systemctl status mysqld echo '######mysql is install completed done.######'

start install php

cd /software tar zxvf php-7.1.4.tar.gz cd php-7.1.4/ ./configure --help yum -y install libjpeg libjpeg-devel libpng libpng-devel freetype freetype-devel libxml2 libxml2-devel zlib zlib-devel curl curl-devel openssl openssl-devel ./configure --prefix=/usr/local/php --enable-fpm --with-fpm-user=nginx --with-fpm-group=nginx --with-mysqli --with-zlib --with-curl --with-gd --with-jpeg-dir --with-png-dir --with-freetype-dir --with-openssl --enable-mbstring --enable-xml --enable-session --enable-ftp --enable-pdo -enable-tokenizer --enable-zip sleep 1 make && make install sleep 2 cp php.ini-development /usr/local/php/lib/php.ini grep mysqli.default_socket /usr/local/php/lib/php.ini sed -i 's#mysqli.default_socket =#mysqli.default_socket = /usr/local/mysql/mysql.sock#' /usr/local/php/lib/php.ini grep mysqli.default_socket /usr/local/php/lib/php.ini grep date.timezone /usr/local/php/lib/php.ini sed -i 's#;date.timezone =#date.timezone = Asia/Shanghai#' /usr/local/php/lib/php.ini grep date.timezone /usr/local/php/lib/php.ini /usr/local/php/bin/php -v /usr/local/php/bin/php -m cp /usr/local/php/etc/php-fpm.conf.default cp /usr/local/php/etc/php-fpm.conf.default /usr/local/php/etc/php-fpm.conf cp /usr/local/php/etc/php-fpm.d/www.conf.default /usr/local/php/etc/php-fpm.d/www.conf grep -E 'user =|group =' /usr/local/php/etc/php-fpm.d/www.conf sed -i 's#user = nginx#user = www#' /usr/local/php/etc/php-fpm.d/www.conf sed -i 's#group = nginx#group = www#' /usr/local/php/etc/php-fpm.d/www.conf grep -E 'user =|group =' /usr/local/php/etc/php-fpm.d/www.conf cp sapi/fpm/php-fpm.service /usr/lib/systemd/system/ grep -E 'PIDFile|ExecStart' /usr/lib/systemd/system/php-fpm.service systemctl daemon-reload systemctl enable php-fpm systemctl start php-fpm systemctl status php-fpm echo '######php is install completed done.######'

####### create test.com file used by test lnmp config is correct or incorrect ###### mkdir -p /var/www/html chown -R www.www /var/www cat >> /var/www/html/test.php << EOF

> test.com.conf <