在華爲路由器上配置IPv6 over IPv4隧道

在R1上的配置

[R1]ipv6

[R1]interface Tunnel 0/0/0

[R1-Tunnel0/0/0]tunnel-protocol ipv6-ipv4

[R1-Tunnel0/0/0]source 12.1.1.1

[R1-Tunnel0/0/0]destination 12.1.2.1

[R1-Tunnel0/0/0]ipv6 enable 

[R1-Tunnel0/0/0]ipv6 address 2001:2::1 64

[R1-Tunnel0/0/0]quit

[R1]ipv6 route-static 2001:3:: 64 2001:2::2

在R3上的配置

[R3]ipv6

[R3]interface Tunnel 0/0/0

[R3-Tunnel0/0/0]tunnel-protocol ipv6-ipv4

[R3-Tunnel0/0/0]source 12.1.2.1

[R3-Tunnel0/0/0]destination 12.1.1.1

[R3-Tunnel0/0/0]ipv6 enable 

[R3-Tunnel0/0/0]ipv6 address 2001:2::2 64

[R3-Tunnel0/0/0]quit

[R3]ipv6 route-static 2001:1:: 64 2001:2::1

相關視頻教程

http://edu.51cto.com/course/11268.html