ansible模塊yum、services、setup
ansible模塊 yum：node
[root@node1 ~]# ansible-doc -s yum less 436 Copyright (C) 1984-2009 Mark Nudelman less comes with NO WARRANTY, to the extent permitted by law. For information about the terms of redistribution, see the file named README in the less distribution. Homepage: http://www.greenwoodsoftware.com/less - name: M a n a g e s p a c k a g e s w i t h t h e I ( y u m ) p a c k a g e m a n a g e r action: yum conf_file # The remote yum configuration file to use for the transaction. disable_gpg_check # Whether to disable the GPG checking of signatures of packages being installed. Has an effect only if state is `present' or `latest'. disablerepo # `Repoid' of repositories to disable for the install/update operation. These repos will not persist beyond the transaction. When specifyi enablerepo # `Repoid' of repositories to enable for the install/update operation. These repos will not persist beyond the transaction. When specifyin list # Various (non-idempotent) commands for usage with `/usr/bin/ansible' and `not' playbooks. See examples. name= # Package name, or package specifier with version, like `name-1.0'. When using state=latest, this can be '*' which means run: yum -y updat state # Whether to install (`present', `latest'), or remove (`absent') a package. update_cache # Force updating the cache. Has an effect only if state is `present' or `latest'. [root@node1 ~]#
安裝httpd服務python
[root@node1 ~]# ansible testservers -m yum -a 'name=httpd state=present'
192.168.100.132 | success >> {
"changed": true,
"msg": "",
"rc": 0,
"results": [
"Loaded plugins: fastestmirror, refresh-packagekit, security\nLoading mirror speeds from cached hostfile\n * base: mirrors.btte.net\n * epel: mirrors.hustunique.com\n * extras: mirrors.btte.net\n * updates: mirrors.yun-idc.com\nSetting up Install Process\nResolving Dependencies\n--> Running transaction check\n---> Package httpd.x86_64 0:2.2.15-47.el6.centos.3 will be installed\n--> Processing Dependency: httpd-tools = 2.2.15-47.el6.centos.3 for package: httpd-2.2.15-47.el6.centos.3.x86_64\n--> Running transaction check\n---> Package httpd-tools.x86_64 0:2.2.15-29.el6.centos will be updated\n---> Package httpd-tools.x86_64 0:2.2.15-47.el6.centos.3 will be an update\n--> Finished Dependency Resolution\n\nDependencies Resolved\n\n================================================================================\n Package Arch Version Repository Size\n================================================================================\nInstalling:\n httpd x86_64 2.2.15-47.el6.centos.3 updates 831 k\nUpdating for dependencies:\n httpd-tools x86_64 2.2.15-47.el6.centos.3 updates 77 k\n\nTransaction Summary\n================================================================================\nInstall 1 Package(s)\nUpgrade 1 Package(s)\n\nTotal download size: 908 k\nDownloading Packages:\n--------------------------------------------------------------------------------\nTotal 4.4 MB/s | 908 kB 00:00 \nRunning rpm_check_debug\nRunning Transaction Test\nTransaction Test Succeeded\nRunning Transaction\n\r Updating : httpd-tools-2.2.15-47.el6.centos.3.x86_64 1/3 \n\r Installing : httpd-2.2.15-47.el6.centos.3.x86_64 2/3 \n\r Cleanup : httpd-tools-2.2.15-29.el6.centos.x86_64 3/3 \n\r Verifying : httpd-tools-2.2.15-47.el6.centos.3.x86_64 1/3 \n\r Verifying : httpd-2.2.15-47.el6.centos.3.x86_64 2/3 \n\r Verifying : httpd-tools-2.2.15-29.el6.centos.x86_64 3/3 \n\nInstalled:\n httpd.x86_64 0:2.2.15-47.el6.centos.3 \n\nDependency Updated:\n httpd-tools.x86_64 0:2.2.15-47.el6.centos.3 \n\nComplete!\n"
]
}
192.168.100.131 | success >> {
"changed": true,
"msg": "",
"rc": 0,
"results": [
"Loaded plugins: fastestmirror\nLoading mirror speeds from cached hostfile\n * epel: mirrors.opencas.cn\nSetting up Install Process\nResolving Dependencies\n--> Running transaction check\n---> Package httpd.x86_64 0:2.2.15-29.el6.centos will be installed\n--> Processing Dependency: httpd-tools = 2.2.15-29.el6.centos for package: httpd-2.2.15-29.el6.centos.x86_64\n--> Processing Dependency: apr-util-ldap for package: httpd-2.2.15-29.el6.centos.x86_64\n--> Processing Dependency: /etc/mime.types for package: httpd-2.2.15-29.el6.centos.x86_64\n--> Processing Dependency: libaprutil-1.so.0()(64bit) for package: httpd-2.2.15-29.el6.centos.x86_64\n--> Processing Dependency: libapr-1.so.0()(64bit) for package: httpd-2.2.15-29.el6.centos.x86_64\n--> Running transaction check\n---> Package apr.x86_64 0:1.3.9-5.el6_2 will be installed\n---> Package apr-util.x86_64 0:1.3.9-3.el6_0.1 will be installed\n---> Package apr-util-ldap.x86_64 0:1.3.9-3.el6_0.1 will be installed\n---> Package httpd-tools.x86_64 0:2.2.15-29.el6.centos will be installed\n---> Package mailcap.noarch 0:2.1.31-2.el6 will be installed\n--> Finished Dependency Resolution\n\nDependencies Resolved\n\n================================================================================\n Package Arch Version Repository\n Size\n================================================================================\nInstalling:\n httpd x86_64 2.2.15-29.el6.centos 1 821 k\nInstalling for dependencies:\n apr x86_64 1.3.9-5.el6_2 1 123 k\n apr-util x86_64 1.3.9-3.el6_0.1 1 87 k\n apr-util-ldap x86_64 1.3.9-3.el6_0.1 1 15 k\n httpd-tools x86_64 2.2.15-29.el6.centos 1 73 k\n mailcap noarch 2.1.31-2.el6 1 27 k\n\nTransaction Summary\n================================================================================\nInstall 6 Package(s)\n\nTotal download size: 1.1 M\nInstalled size: 3.6 M\nDownloading Packages:\n--------------------------------------------------------------------------------\nTotal 13 MB/s | 1.1 MB 00:00 \nRunning rpm_check_debug\nRunning Transaction Test\nTransaction Test Succeeded\nRunning Transaction\n\r Installing : apr-1.3.9-5.el6_2.x86_64 1/6 \n\r Installing : apr-util-1.3.9-3.el6_0.1.x86_64 2/6 \n\r Installing : apr-util-ldap-1.3.9-3.el6_0.1.x86_64 3/6 \n\r Installing : httpd-tools-2.2.15-29.el6.centos.x86_64 4/6 \n\r Installing : mailcap-2.1.31-2.el6.noarch 5/6 \n\r Installing : httpd-2.2.15-29.el6.centos.x86_64 6/6 \n\r Verifying : httpd-2.2.15-29.el6.centos.x86_64 1/6 \n\r Verifying : apr-util-ldap-1.3.9-3.el6_0.1.x86_64 2/6 \n\r Verifying : httpd-tools-2.2.15-29.el6.centos.x86_64 3/6 \n\r Verifying : apr-1.3.9-5.el6_2.x86_64 4/6 \n\r Verifying : mailcap-2.1.31-2.el6.noarch 5/6 \n\r Verifying : apr-util-1.3.9-3.el6_0.1.x86_64 6/6 \n\nInstalled:\n httpd.x86_64 0:2.2.15-29.el6.centos \n\nDependency Installed:\n apr.x86_64 0:1.3.9-5.el6_2 \n apr-util.x86_64 0:1.3.9-3.el6_0.1 \n apr-util-ldap.x86_64 0:1.3.9-3.el6_0.1 \n httpd-tools.x86_64 0:2.2.15-29.el6.centos \n mailcap.noarch 0:2.1.31-2.el6 \n\nComplete!\n"
]
}
name：能夠指定版本號，否認爲默認最新linux
卸載 httpd 服務：ios
[root@node1 ~]# ansible testservers -m yum -a 'name=httpd state=absent '
192.168.100.131 | success >> {
"changed": true,
"msg": "",
"rc": 0,
"results": [
"Loaded plugins: fastestmirror\nSetting up Remove Process\nResolving Dependencies\n--> Running transaction check\n---> Package httpd.x86_64 0:2.2.15-29.el6.centos will be erased\n--> Finished Dependency Resolution\n\nDependencies Resolved\n\n================================================================================\n Package Arch Version Repository Size\n================================================================================\nRemoving:\n httpd x86_64 2.2.15-29.el6.centos @1 2.9 M\n\nTransaction Summary\n================================================================================\nRemove 1 Package(s)\n\nInstalled size: 2.9 M\nDownloading Packages:\nRunning rpm_check_debug\nRunning Transaction Test\nTransaction Test Succeeded\nRunning Transaction\n\r Erasing : httpd-2.2.15-29.el6.centos.x86_64 1/1 \n\r Verifying : httpd-2.2.15-29.el6.centos.x86_64 1/1 \n\nRemoved:\n httpd.x86_64 0:2.2.15-29.el6.centos \n\nComplete!\n"
]
}
192.168.100.132 | success >> {
"changed": true,
"msg": "",
"rc": 0,
"results": [
"Loaded plugins: fastestmirror, refresh-packagekit, security\nSetting up Remove Process\nResolving Dependencies\n--> Running transaction check\n---> Package httpd.x86_64 0:2.2.15-47.el6.centos.3 will be erased\n--> Finished Dependency Resolution\n\nDependencies Resolved\n\n================================================================================\n Package Arch Version Repository Size\n================================================================================\nRemoving:\n httpd x86_64 2.2.15-47.el6.centos.3 @updates 2.9 M\n\nTransaction Summary\n================================================================================\nRemove 1 Package(s)\n\nInstalled size: 2.9 M\nDownloading Packages:\nRunning rpm_check_debug\nRunning Transaction Test\nTransaction Test Succeeded\nRunning Transaction\n\r Erasing : httpd-2.2.15-47.el6.centos.3.x86_64 1/1 \n\r Verifying : httpd-2.2.15-47.el6.centos.3.x86_64 1/1 \n\nRemoved:\n httpd.x86_64 0:2.2.15-47.el6.centos.3 \n\nComplete!\n"
]
}
[root@node1 ~]#
模塊 service ：redis
[root@node1 ~]# ansible-doc -s service less 436 Copyright (C) 1984-2009 Mark Nudelman less comes with NO WARRANTY, to the extent permitted by law. For information about the terms of redistribution, see the file named README in the less distribution. Homepage: http://www.greenwoodsoftware.com/less - name: M a n a g e s e r v i c e s . action: service arguments # Additional arguments provided on the command line enabled # Whether the service should start on boot. *At least one of state and enabled are required.* name= # Name of the service. pattern # If the service does not respond to the status command, name a substring to look for as would be found in the output of the `ps' command runlevel # For OpenRC init scripts (ex: Gentoo) only. The runlevel that this service belongs to. sleep # If the service is being `restarted' then sleep this many seconds between the stop and start command. This helps to workaround badly beha state # `started'/`stopped' are idempotent actions that will not run commands unless necessary. `restarted' will always bounce the service. `r [root@node1 ~]#
啓動 httpd 服務，並設置開機啓動shell
[root@node1 ~]# ansible testservers -m yum -a 'name=httpd state=present'
[root@node1 ~]# ansible testservers -m command -a 'service httpd status'
192.168.100.131 | FAILED | rc=3 >>
httpd 已停
192.168.100.132 | FAILED | rc=3 >>
httpd 已停
[root@node1 ~]# ansible testservers -m command -a 'chkconfig --list httpd'
192.168.100.131 | success | rc=0 >>
httpd 0:off 1:off 2:off 3:off 4:off 5:off 6:off
192.168.100.132 | success | rc=0 >>
httpd 0:off 1:off 2:off 3:off 4:off 5:off 6:off
[root@node1 ~]# ansible testservers -m service -a 'name=httpd enabled=true state=started'
192.168.100.131 | success >> {
"changed": true,
"enabled": true,
"name": "httpd",
"state": "started"
}
192.168.100.132 | success >> {
"changed": true,
"enabled": true,
"name": "httpd",
"state": "started"
}
[root@node1 ~]# ansible testservers -m command -a 'service httpd status'
192.168.100.131 | success | rc=0 >>
httpd (pid 3270) 正在運行...
192.168.100.132 | success | rc=0 >>
httpd (pid 33341) 正在運行...
[root@node1 ~]# ansible testservers -m command -a 'chkconfig --list httpd'
192.168.100.131 | success | rc=0 >>
httpd 0:off 1:off 2:on 3:on 4:on 5:on 6:off
192.168.100.132 | success | rc=0 >>
httpd 0:off 1:off 2:on 3:on 4:on 5:on 6:off
[root@node1 ~]#
模塊 setup ： 收集遠程主機的信息centos
每一個被管理的主機，在執行命令操做前都會執行setup模塊，將信息彙報到ansible server 端
bash
[root@node1 ~]# ansible-doc -s setup less 436 Copyright (C) 1984-2009 Mark Nudelman less comes with NO WARRANTY, to the extent permitted by law. For information about the terms of redistribution, see the file named README in the less distribution. Homepage: http://www.greenwoodsoftware.com/less - name: G a t h e r s f a c t s a b o u t r e m o t e h o s t s action: setup fact_path # path used for local ansible facts (*.fact) - files in this dir will be run (if executable) and their results be added to ansible_local f filter # if supplied, only return facts that match this shell-style (fnmatch) wildcard. [root@node1 ~]#
以 testservers 組中的192.168.100.132 主機爲例：app
192.168.100.132 | success >> {
"ansible_facts": {
"ansible_all_ipv4_addresses": [
"192.168.100.132"
],
"ansible_all_ipv6_addresses": [
"fe80::20c:29ff:fe42:3d4b"
],
"ansible_architecture": "x86_64",
"ansible_bios_date": "07/31/2013",
"ansible_bios_version": "6.00",
"ansible_cmdline": {
"KEYBOARDTYPE": "pc",
"KEYTABLE": "us",
"LANG": "zh_CN.UTF-8",
"nomodeset": true,
"quiet": true,
"rd_LVM_LV": "vg_v3/lv_swap",
"rd_NO_DM": true,
"rd_NO_LUKS": true,
"rd_NO_MD": true,
"rhgb": true,
"ro": true,
"root": "/dev/mapper/vg_v3-lv_root"
},
"ansible_date_time": {
"date": "2016-02-29",
"day": "29",
"epoch": "1456726561",
"hour": "14",
"iso8601": "2016-02-29T06:16:01Z",
"iso8601_micro": "2016-02-29T06:16:01.657953Z",
"minute": "16",
"month": "02",
"second": "01",
"time": "14:16:01",
"tz": "CST",
"tz_offset": "+0800",
"weekday": "Monday",
"year": "2016"
},
"ansible_default_ipv4": {
"address": "192.168.100.132",
"alias": "eth0",
"gateway": "192.168.100.2",
"interface": "eth0",
"macaddress": "00:0c:29:42:3d:4b",
"mtu": 1500,
"netmask": "255.255.255.0",
"network": "192.168.100.0",
"type": "ether"
},
"ansible_default_ipv6": {},
"ansible_devices": {
"sda": {
"holders": [],
"host": "SCSI storage controller: LSI Logic / Symbios Logic 53c1030 PCI-X Fusion-MPT Dual Ultra320 SCSI (rev 01)",
"model": "VMware Virtual S",
"partitions": {
"sda1": {
"sectors": "1024000",
"sectorsize": 512,
"size": "500.00 MB",
"start": "2048"
},
"sda2": {
"sectors": "40916992",
"sectorsize": 512,
"size": "19.51 GB",
"start": "1026048"
}
},
"removable": "0",
"rotational": "1",
"scheduler_mode": "cfq",
"sectors": "41943040",
"sectorsize": "512",
"size": "20.00 GB",
"support_discard": "0",
"vendor": "VMware,"
},
"sr0": {
"holders": [],
"host": "SATA controller: VMware SATA AHCI controller",
"model": "VMware SATA CD01",
"partitions": {},
"removable": "1",
"rotational": "1",
"scheduler_mode": "cfq",
"sectors": "2097151",
"sectorsize": "512",
"size": "1024.00 MB",
"support_discard": "0",
"vendor": "NECVMWar"
}
},
"ansible_distribution": "CentOS",
"ansible_distribution_major_version": "6",
"ansible_distribution_release": "Final",
"ansible_distribution_version": "6.5",
"ansible_domain": "bta.net.cn",
"ansible_env": {
"CVS_RSH": "ssh",
"G_BROKEN_FILENAMES": "1",
"HOME": "/root",
"LANG": "C",
"LC_CTYPE": "C",
"LESSOPEN": "|/usr/bin/lesspipe.sh %s",
"LOGNAME": "root",
"MAIL": "/var/mail/root",
"PATH": "/usr/lib64/qt-3.3/bin:/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin",
"PWD": "/root",
"QTDIR": "/usr/lib64/qt-3.3",
"QTINC": "/usr/lib64/qt-3.3/include",
"QTLIB": "/usr/lib64/qt-3.3/lib",
"SHELL": "/bin/bash",
"SHLVL": "2",
"SSH_ASKPASS": "/usr/libexec/openssh/gnome-ssh-askpass",
"SSH_CLIENT": "192.168.100.129 46085 22",
"SSH_CONNECTION": "192.168.100.129 46085 192.168.100.132 22",
"SSH_TTY": "/dev/pts/0",
"TERM": "vt100",
"USER": "root",
"_": "/usr/bin/python"
},
"ansible_eth0": {
"active": true,
"device": "eth0",
"ipv4": {
"address": "192.168.100.132",
"netmask": "255.255.255.0",
"network": "192.168.100.0"
},
"ipv6": [
{
"address": "fe80::20c:29ff:fe42:3d4b",
"prefix": "64",
"scope": "link"
}
],
"macaddress": "00:0c:29:42:3d:4b",
"module": "e1000",
"mtu": 1500,
"promisc": false,
"type": "ether"
},
"ansible_fips": false,
"ansible_form_factor": "Other",
"ansible_fqdn": "bt-199-037.bta.net.cn",
"ansible_hostname": "v3",
"ansible_interfaces": [
"lo",
"pan0",
"eth0"
],
"ansible_kernel": "2.6.32-431.el6.x86_64",
"ansible_lo": {
"active": true,
"device": "lo",
"ipv4": {
"address": "127.0.0.1",
"netmask": "255.0.0.0",
"network": "127.0.0.0"
},
"ipv6": [
{
"address": "::1",
"prefix": "128",
"scope": "host"
}
],
"mtu": 16436,
"promisc": false,
"type": "loopback"
},
"ansible_lsb": {
"codename": "Final",
"description": "CentOS release 6.5 (Final)",
"id": "CentOS",
"major_release": "6",
"release": "6.5"
},
"ansible_machine": "x86_64",
"ansible_machine_id": "7fa908076135396c09ba795100000011",
"ansible_memfree_mb": 217,
"ansible_memory_mb": {
"nocache": {
"free": 640,
"used": 348
},
"real": {
"free": 217,
"total": 988,
"used": 771
},
"swap": {
"cached": 0,
"free": 1981,
"total": 1983,
"used": 2
}
},
"ansible_memtotal_mb": 988,
"ansible_mounts": [
{
"device": "/dev/mapper/vg_v3-lv_root",
"fstype": "ext4",
"mount": "/",
"options": "rw",
"size_available": 13751066624,
"size_total": 18569568256,
"uuid": "5b1e1ab5-6a12-4466-a832-0fa80ec05610"
},
{
"device": "/dev/sda1",
"fstype": "ext4",
"mount": "/boot",
"options": "rw",
"size_available": 445854720,
"size_total": 507744256,
"uuid": "01b79867-8bb5-4492-bc99-ee4c1e77ad45"
}
],
"ansible_nodename": "v3.lansgg.com",
"ansible_os_family": "RedHat",
"ansible_pan0": {
"active": false,
"device": "pan0",
"id": "8000.000000000000",
"interfaces": [],
"macaddress": "82:5d:e7:15:7f:60",
"mtu": 1500,
"promisc": false,
"stp": false,
"type": "bridge"
},
"ansible_pkg_mgr": "yum",
"ansible_processor": [
"GenuineIntel",
"Intel(R) Core(TM) i5-3210M CPU @ 2.50GHz"
],
"ansible_processor_cores": 1,
"ansible_processor_count": 1,
"ansible_processor_threads_per_core": 1,
"ansible_processor_vcpus": 1,
"ansible_product_name": "VMware Virtual Platform",
"ansible_product_serial": "VMware-56 4d 4b fa 62 36 82 17-59 18 88 5d 7e 42 3d 4b",
"ansible_product_uuid": "564D4BFA-6236-8217-5918-885D7E423D4B",
"ansible_product_version": "None",
"ansible_python_version": "2.6.6",
"ansible_selinux": {
"status": "disabled"
},
"ansible_ssh_host_key_dsa_public": "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",
"ansible_ssh_host_key_rsa_public": "AAAAB3NzaC1yc2EAAAABIwAAAQEAzM8GNFPLJTd+3PYOlj5wcJMYgZNIdN7ozvQVZn8O7CpDnBXscGBezQ1m2QJsrzeTWR2FOKrAqv3oWeFwW65cxcSgVgdzVHatR6KhVqqJyF0+39sRAAAxAwK3vXK2IdKLLIIWShvIH+F0uL9aNP0UQt0gJLsqVI6yJ1zAB3qexPX+bZNRa3K33tkeAWfJdlJUScgaUe3oUnvAdXMBuTYp9fJwZyMo3HibUuE2YbeFAXTj6qnRyKOgwponPkkv9TuM8yenNIKqbjxIALgNyERMx0FDHc22Ow2AEfWASE+KT8ZrdbjKl+pMUz64MAHpaNgWzrivuSFRUzjrECwFolk47w==",
"ansible_swapfree_mb": 1981,
"ansible_swaptotal_mb": 1983,
"ansible_system": "Linux",
"ansible_system_vendor": "VMware, Inc.",
"ansible_user_dir": "/root",
"ansible_user_gecos": "root",
"ansible_user_gid": 0,
"ansible_user_id": "root",
"ansible_user_shell": "/bin/bash",
"ansible_user_uid": 0,
"ansible_userspace_architecture": "x86_64",
"ansible_userspace_bits": "64",
"ansible_virtualization_role": "guest",
"ansible_virtualization_type": "VMware",
"module_setup": true
},
"changed": false
}
[root@node1 ~]#
通常在 playbook 中使用較多，如template模塊文件中。
less
相關文章
- 1. 每日學習-ansible yum模塊
- 2. Mendix_Rest Services模塊
- 3. 20-Ansible經常使用模塊-yum模塊
- 4. ansible中File模塊、Fetch模塊、Yum模塊、Pip模塊、Service模塊、Cron模塊、User模塊、Group模塊
- 5. ansible經常使用模塊（copy模塊,file模塊,yum模塊,service模塊,firewalld模塊,）
- 6. Linux下Ansible中user模塊，yum模塊，service模塊，copy模塊，file模塊，mysql_user模塊的使用（二）
- 7. ansible 模塊
- 8. ansible模塊script
- 9. ansible模塊
- 10. Ansible模塊
- 更多相關文章...
- • Lua 模塊與包 - Lua 教程
- • DTD - XML 構建模塊 - DTD 教程
- • 委託模式
- • NewSQL-TiDB相關
相關標籤/搜索
每日一句
-
每一个你不满意的现在，都有一个你没有努力的曾经。
歡迎關注本站公眾號,獲取更多信息
相關文章
- 1. 每日學習-ansible yum模塊
- 2. Mendix_Rest Services模塊
- 3. 20-Ansible經常使用模塊-yum模塊
- 4. ansible中File模塊、Fetch模塊、Yum模塊、Pip模塊、Service模塊、Cron模塊、User模塊、Group模塊
- 5. ansible經常使用模塊（copy模塊,file模塊,yum模塊,service模塊,firewalld模塊,）
- 6. Linux下Ansible中user模塊，yum模塊，service模塊，copy模塊，file模塊，mysql_user模塊的使用（二）
- 7. ansible 模塊
- 8. ansible模塊script
- 9. ansible模塊
- 10. Ansible模塊