Ansible之經常使用模塊（一）
ansible之因此功能強大，不是ansible自己，是由於它有衆多的模塊，前文咱們介紹了ansible的基礎介紹，系列命令的用法以及選項的說明，經過前文的學習咱們知道了ansible是基於python語言編寫，咱們在執行一條ansible命令一般會指定一個模塊，即使不指定它也有默認的模塊，它的工做流程就是經過各類模塊去完成對遠程主機的管理、配置等操做。接下來咱們來看看ansible的一些經常使用模塊的使用。node
一、ping模塊：它的主要功能是嘗試鏈接遠端主機，並測試遠端主機是否在線的一個模塊python
經常使用參數：無nginx
咱們在使用ping模塊的時候，一般後邊不用-a指定參數，固然它也有不少參數，咱們能夠用ansible-doc ping 這條命令去查看。web
[root@localhost ~]# ansible all -m ping
192.168.0.218 | SUCCESS => {
"changed": false,
"ping": "pong"
}
192.168.0.128 | SUCCESS => {
"changed": false,
"ping": "pong"
}
192.168.0.99 | SUCCESS => {
"changed": false,
"ping": "pong"
}
[root@localhost ~]#
說明：以上命令是用ping模塊去測試全部在ansible主機清單裏定義的主機是否在線，若在線返回字符「pong」；以上是咱們ping模塊的最經常使用用法docker
二、command：此模塊在幫助文檔裏的解釋是，在遠端節點主機上執行一條命令；這個模塊在ansible裏是一個默認的模塊，即咱們在使用ansible命令時不用-m指定模塊時，ansible默認就是調用的此模塊工做；shell
模塊幫助：centos
[root@localhost ~]# ansible-doc -s command
- name: Executes a command on a remote node
command:
chdir: # Change into this directory before running the command.
creates: # A filename or (since 2.0) glob pattern, when it already exists, this
step will *not* be run.
free_form: # (required) The command module takes a free form command to run. There
is no parameter actually named 'free
form'. See the examples!
removes: # A filename or (since 2.0) glob pattern, when it does not exist, this
step will *not* be run.
stdin: # Set the stdin of the command directly to the specified value.
warn: # If command_warnings are on in ansible.cfg, do not warn about this
particular line if set to `no'.
[root@localhost ~]#
參數說明：bash
chdir：這個參數的做用是在執行命令以前切換到這個目錄app
[root@localhost ~]# ansible websers -m command -a 'chdir=/var/log/ pwd ' 192.168.0.218 | SUCCESS | rc=0 >> /var/log 192.168.0.99 | SUCCESS | rc=0 >> /var/log [root@localhost ~]# ansible websers -m command -a ' pwd ' 192.168.0.218 | SUCCESS | rc=0 >> /root 192.168.0.99 | SUCCESS | rc=0 >> /root [root@localhost ~]# ansible websers -m command -a 'chdir=/var/log/ pwd ' 192.168.0.218 | SUCCESS | rc=0 >> /var/log 192.168.0.99 | SUCCESS | rc=0 >> /var/log [root@localhost ~]#
說明：在不指定chdir這個參數時，ansible默認執行路徑是/rootdom
creates：這個參數的做用是若是咱們指定文件存在，則後續的操做將再也不執行下去。
[root@localhost init.d]# ansible websers -a 'ls /etc/ansible/'
192.168.0.218 | FAILED | rc=2 >>
ls: cannot access /etc/ansible/: No such file or directorynon-zero return code
192.168.0.99 | SUCCESS | rc=0 >>
ansible.cfg
hosts
roles
[root@localhost init.d]# ansible websers -a 'creates=/etc/ansible/ ip addr show '
192.168.0.218 | SUCCESS | rc=0 >>
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000
link/ether 00:0c:29:e8:f6:7b brd ff:ff:ff:ff:ff:ff
inet 192.168.0.218/24 brd 192.168.0.255 scope global eth0
inet6 fe80::20c:29ff:fee8:f67b/64 scope link
valid_lft forever preferred_lft forever
3: pan0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN
link/ether ba:01:d9:85:53:42 brd ff:ff:ff:ff:ff:ff
192.168.0.99 | SUCCESS | rc=0 >>
skipped, since /etc/ansible/ exists
[root@localhost init.d]#
說明：以上命令的表示，若是/etc/ansible/ 這個文件不存在（固然目錄也是文件，在Linux裏一切皆文件），則執行後面的命令「ip addr show」，反之若/etc/ansible/這個文件存在，則跳事後續的任何操做。從上面命令返回結果能夠看到，在218這臺主機上是不存在/etc/ansible/這個目錄的，因此後續的命令ip addr show 這條命令它會執行，固然99這臺主機上有/etc/ansible/這個目錄，因此它後續的ip addr show 這條命令不執行。
removes：這個參數和上面的creates這個參數的做用是相反的，它的做用是若是指定的文件不存在，則後續命令將不執行，反之，若是指定文件存在，則運行後續的命令
[root@localhost init.d]# ansible websers -a 'removes=/etc/ansible ip addr show '
192.168.0.218 | SUCCESS | rc=0 >>
skipped, since /etc/ansible does not exist
192.168.0.99 | SUCCESS | rc=0 >>
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: enp2s0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP group default qlen 1000
link/ether 00:30:18:51:af:3c brd ff:ff:ff:ff:ff:ff
inet 192.168.0.99/24 brd 192.168.0.255 scope global noprefixroute enp2s0
valid_lft forever preferred_lft forever
inet6 fe80::33cf:fd76:e139:9e01/64 scope link noprefixroute
valid_lft forever preferred_lft forever
3: enp3s0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc pfifo_fast state DOWN group default qlen 1000
link/ether 00:30:18:51:af:3d brd ff:ff:ff:ff:ff:ff
4: docker0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc noqueue state DOWN group default
link/ether 02:42:6c:6d:27:62 brd ff:ff:ff:ff:ff:ff
inet 172.17.0.1/16 scope global docker0
valid_lft forever preferred_lft forever
[root@localhost init.d]#
說明：在218上不存在/etc/ansible/這個目錄，因此它後續命令，不執行，99上存在/etc/ansilbe/這個目錄，則後續的命令會運行。看了以上的兩個參數的示例，咱們不難理解這來兩個參數的做用就是判斷指定文件是否存在，而後決定後續的動做是否運行。
以上是command模塊的經常使用參數的使用和說明，這個模塊能夠執行Linux裏的命令，並返回結果，可是它有個肯定就是它不支持「| < > ; & $varname」等符號，也就是說一些複雜的Linux命令用command這個模塊有點不合適，若是要實現支持這些符號，咱們可使用shell模塊實現。下面來看看shell模塊
三、shell：此模塊和command類似，都是執行Linux裏的一些命令的模塊，此模塊支持上面說的「| < > ; & $varname」這些符號。咱們先來看看幫助文檔裏的說明吧
[root@localhost ~]# ansible-doc -s shell
- name: Execute commands in nodes.
shell:
chdir: # cd into this directory before running the command
creates: # a filename, when it already exists, this step will *not* be run.
executable: # change the shell used to execute the command. Should be an absolute
path to the executable.
free_form: # (required) The shell module takes a free form command to run, as a
string. There's not an actual option
named "free form". See the examples!
removes: # a filename, when it does not exist, this step will *not* be run.
stdin: # Set the stdin of the command directly to the specified value.
warn: # if command warnings are on in ansible.cfg, do not warn about this
particular line if set to no/false.
[root@localhost ~]#
說明：此模塊的幫助說明和command模塊的幫助說明書同樣的，參數用法都是同樣的，這裏咱們再也不闡述其做用。
[root@localhost ~]# ansible websers -m shell -a 'cat /etc/passwd|wc -l' 192.168.0.218 | SUCCESS | rc=0 >> 36 192.168.0.99 | SUCCESS | rc=0 >> 36 [root@localhost ~]# ansible websers -m shell -a 'echo $HOSTNAME' 192.168.0.218 | SUCCESS | rc=0 >> localhost.localdomain 192.168.0.99 | SUCCESS | rc=0 >> docker [root@localhost ~]# ansible websers -m shell -a 'chdir=/var/log/ ls -l ' 192.168.0.218 | SUCCESS | rc=0 >> total 2740 -rw-------. 1 root root 2368 Nov 3 15:15 anaconda.ifcfg.log -rw-------. 1 root root 21845 Nov 3 15:15 anaconda.log -rw-------. 1 root root 36953 Nov 3 15:15 anaconda.program.log -rw-------. 1 root root 114682 Nov 3 15:15 anaconda.storage.log -rw-------. 1 root root 149438 Nov 3 15:15 anaconda.syslog -rw-------. 1 root root 26433 Nov 3 15:15 anaconda.xlog -rw-------. 1 root root 121830 Nov 3 15:15 anaconda.yum.log drwxr-x---. 2 root root 4096 Nov 3 15:18 audit -rw-r--r--. 1 root root 2682 Nov 11 13:02 boot.log -rw-------. 1 root utmp 2304 Nov 8 23:37 btmp drwxr-xr-x. 2 root root 4096 Nov 3 15:18 ConsoleKit -rw-------. 1 root root 8097 Nov 11 13:50 cron -rw-------. 1 root root 17451 Nov 10 15:13 cron-20191110 drwxr-xr-x. 2 lp sys 4096 Mar 22 2017 cups -rw-r--r--. 1 root root 90191 Nov 11 13:01 dmesg -rw-r--r--. 1 root root 90033 Nov 10 21:24 dmesg.old -rw-r--r--. 1 root root 208625 Nov 3 15:14 dracut.log drwxrwx--T. 2 root gdm 4096 Nov 11 13:02 gdm drwx------. 2 root root 4096 Nov 3 21:13 httpd -rw-r--r--. 1 root root 146584 Nov 11 13:54 lastlog -rw-------. 1 root root 1274 Nov 11 13:02 maillog -rw-------. 1 root root 2360 Nov 10 14:27 maillog-20191110 -rw-------. 1 root root 496810 Nov 11 13:54 messages -rw-------. 1 root root 980290 Nov 10 14:55 messages-20191110 drwxr-xr-x. 2 ntp ntp 4096 Feb 6 2017 ntpstats -rw-r--r--. 1 root root 89 Nov 11 13:02 pm-powersave.log drwx------. 2 root root 4096 Mar 16 2015 ppp drwxr-xr-x. 2 root root 4096 Nov 3 19:21 prelink drwxr-xr-x. 2 root root 4096 Nov 11 00:00 sa drwx------. 3 root root 4096 Nov 3 15:10 samba -rw-------. 1 root root 17433 Nov 11 13:54 secure -rw-------. 1 root root 48374 Nov 10 14:44 secure-20191110 -rw-------. 1 root root 0 Nov 3 15:19 spice-vdagent.log -rw-------. 1 root root 0 Nov 10 15:13 spooler -rw-------. 1 root root 0 Nov 3 15:10 spooler-20191110 drwxr-x---. 2 root root 4096 Mar 23 2017 sssd -rw-------. 1 root root 0 Nov 3 15:08 tallylog -rw-r--r--. 1 root root 0 Nov 3 15:19 wpa_supplicant.log -rw-rw-r--. 1 root utmp 122880 Nov 11 13:54 wtmp -rw-r--r--. 1 root root 36528 Nov 11 13:03 Xorg.0.log -rw-r--r--. 1 root root 36528 Nov 10 21:25 Xorg.0.log.old -rw-r--r--. 1 root root 22238 Nov 3 15:20 Xorg.9.log -rw-------. 1 root root 2103 Nov 10 14:55 yum.log 192.168.0.99 | SUCCESS | rc=0 >> total 1556 drwxr-xr-x. 2 root root 204 Jun 22 07:35 anaconda drwx------. 2 root root 23 Oct 31 2018 audit -rw-------. 1 root root 8730 Oct 31 21:03 boot.log -rw------- 1 root root 17574 Sep 25 18:12 boot.log-20190925 -rw------- 1 root root 8982 Sep 26 03:39 boot.log-20190926 -rw------- 1 root root 8859 Oct 5 20:45 boot.log-20191005 -rw------- 1 root root 9012 Oct 6 20:09 boot.log-20191006 -rw------- 1 root root 9091 Oct 7 19:47 boot.log-20191007 -rw------- 1 root root 8767 Oct 13 12:24 boot.log-20191013 -rw------- 1 root root 8664 Oct 23 20:27 boot.log-20191023 -rw------- 1 root utmp 4608 Nov 10 21:40 btmp -rw------- 1 root utmp 1152 Oct 28 02:23 btmp-21081212 drwxr-xr-x. 2 chrony chrony 6 Apr 13 2018 chrony -rw------- 1 root root 82245 Nov 11 13:01 cron -rw------- 1 root root 2778 Oct 13 12:24 cron-20191013 -rw------- 1 root root 2541 Oct 23 20:27 cron-20191023 -rw------- 1 root root 22808 Oct 27 03:49 cron-20191027 -rw------- 1 root root 18678 Nov 5 1972 cron-21081212 -rw-r--r-- 1 root root 70752 Oct 31 21:03 dmesg -rw-r--r-- 1 root root 71716 Oct 23 19:23 dmesg.old -rw-r--r--. 1 root root 2456 Jun 22 09:50 firewalld -rw------- 1 root root 2588 Aug 4 20:34 grubby -rw-r--r--. 1 root root 498 Jun 22 11:03 grubby_prune_debug -rw-r--r--. 1 root root 294628 Nov 11 13:54 lastlog drwxr-xr-x 2 lightdm lightdm 25 Nov 3 14:47 lightdm -rw------- 1 root root 7794 Nov 11 03:13 maillog -rw------- 1 root root 384 Oct 13 11:29 maillog-20191013 -rw------- 1 root root 192 Oct 23 19:24 maillog-20191023 -rw------- 1 root root 566 Oct 24 13:51 maillog-20191027 -rw------- 1 root root 568 Oct 29 21:52 maillog-21081212 -rw------- 1 root root 271736 Nov 11 13:54 messages -rw------- 1 root root 207268 Oct 13 12:24 messages-20191013 -rw------- 1 root root 100944 Oct 23 20:27 messages-20191023 -rw------- 1 root root 17888 Oct 27 03:49 messages-20191027 -rw------- 1 root root 17987 Nov 5 1972 messages-21081212 drwx------ 2 nginx nginx 189 Aug 26 03:36 nginx drwxr-xr-x 3 root root 18 Nov 3 14:31 pluto drwx------ 2 root root 6 Jun 10 2014 ppp drwxr-xr-x. 2 root root 6 Jun 22 07:35 rhsm drwx------ 3 root root 17 Nov 3 14:26 samba -rw------- 1 root root 43005 Nov 11 13:52 secure -rw------- 1 root root 1096 Oct 13 11:29 secure-20191013 -rw------- 1 root root 514 Oct 23 19:24 secure-20191023 -rw------- 1 root root 6265 Oct 25 00:01 secure-20191027 -rw------- 1 root root 9615 Nov 5 1972 secure-21081212 -rw------- 1 root root 0 Nov 5 1972 spooler -rw------- 1 root root 0 Oct 6 20:09 spooler-20191013 -rw------- 1 root root 0 Oct 13 12:24 spooler-20191023 -rw------- 1 root root 0 Oct 23 20:27 spooler-20191027 -rw------- 1 root root 0 Oct 27 03:49 spooler-21081212 -rw-------. 1 root root 0 Jun 22 07:20 tallylog drwxrwxrwx 2 root root 60 Jul 28 20:04 taos drwxr-xr-x. 2 root root 23 Jul 30 01:38 tuned -rw-rw-r--. 1 root utmp 271104 Nov 11 13:54 wtmp -rw------- 1 root root 54348 Nov 10 00:27 yum.log -rw-------. 1 root root 23594 Sep 18 22:24 yum.log-21081212 [root@localhost ~]# ansible websers -m shell -a 'creates=/etc/ansible/ echo $HOSTNAME' 192.168.0.218 | SUCCESS | rc=0 >> localhost.localdomain 192.168.0.99 | SUCCESS | rc=0 >> skipped, since /etc/ansible/ exists [root@localhost ~]# ansible websers -m shell -a 'removes=/etc/ansible/ echo $HOSTNAME' 192.168.0.218 | SUCCESS | rc=0 >> skipped, since /etc/ansible/ does not exist 192.168.0.99 | SUCCESS | rc=0 >> docker [root@localhost ~]#
說明：以上是shell模塊的參數演示用法，它的參數做用同commnd參數做用一致，這裏不過多闡述，它倆的區別在於一個支持管道，shell變量 等符號，一個不支持。
四、script：此模塊的主要做用是在遠程節點上運行一個本地腳本
模塊幫助：
[root@localhost ~]# ansible-doc -s script
- name: Runs a local script on a remote node after transferring it
script:
chdir: # cd into this directory on the remote node before running the script
creates: # a filename, when it already exists, this step will *not* be run.
decrypt: # This option controls the autodecryption of source files using vault.
free_form: # (required) Path to the local script file followed by optional
arguments. There is no parameter
actually named 'free form'; see the
examples!
removes: # a filename, when it does not exist, this step will *not* be run.
[root@localhost ~]#
說明：能夠看到script模塊也有chdir、creates、removes這些參數，看來這些參數很經常使用，這些參數的做用在上面的模塊中有說明和示例，這裏不作演示，咱們來看看咱們上面沒有的參數decrypt
參數說明：
decrypt：此選項使用vault控制源文件的自動解密
[root@localhost scripts]# pwd
/root/scripts
[root@localhost scripts]# cat test.sh
$ANSIBLE_VAULT;1.1;AES256
30613535646235303532393038373431336365323463396334623062653563393964626533646561
3663666531616534636530336463633431363034613734330a336632343031383131646663316633
31653765656663613762356430323035376636666338363034386134303265336235353664356665
3731393363346632650a373434656438623361663734346133396537653239386636366161616438
38653962646336323031616635386430643339636666363761393536316234383630
[root@localhost scripts]# ansible websers -m script --ask-vault-pass -a '/root/scripts/test.sh decrypt=yes'
Vault password:
192.168.0.218 | SUCCESS => {
"changed": true,
"rc": 0,
"stderr": "Shared connection to 192.168.0.218 closed.\r\n",
"stdout": "localhost.localdomain\r\n",
"stdout_lines": [
"localhost.localdomain"
]
}
192.168.0.99 | SUCCESS => {
"changed": true,
"rc": 0,
"stderr": "Shared connection to 192.168.0.99 closed.\r\n",
"stdout": "docker\r\n",
"stdout_lines": [
"docker"
]
}
[root@localhost scripts]#
說明：這個參數默認是容許vault控制原文件解密，這裏要說一下，若是咱們要使用ansible-vault 加密過的文件，那麼我須要加上參數 --ask-vault-pass ，有了這個參數咱們才能夠輸入密碼，纔可使用加密後的文件。
五、copy：此模塊的主要功能是將本地文件複製到遠端節點上
模塊幫助：
[root@localhost ~]# ansible-doc -s copy
- name: Copies files to remote locations
copy:
attributes: # Attributes the file or directory should have. To get supported flags
look at the man page for `chattr' on
the target system. This string should
contain the attributes in the same
order as the one displayed by `lsattr'.
backup: # Create a backup file including the timestamp information so you can
get the original file back if you
somehow clobbered it incorrectly.
content: # When used instead of `src', sets the contents of a file directly to
the specified value. For anything
advanced or with formatting also look
at the template module.
decrypt: # This option controls the autodecryption of source files using vault.
dest: # (required) Remote absolute path where the file should be copied to. If
`src' is a directory, this must be a
directory too. If `dest' is a
nonexistent path and if either `dest'
ends with "/" or `src' is a directory,
`dest' is created. If `src' and `dest'
are files, the parent directory of
`dest' isn't created: the task fails if
it doesn't already exist.
directory_mode: # When doing a recursive copy set the mode for the directories. If this
is not set we will use the system
defaults. The mode is only set on
directories which are newly created,
and will not affect those that already
existed.
follow: # This flag indicates that filesystem links in the destination, if they
exist, should be followed.
force: # the default is `yes', which will replace the remote file when contents
are different than the source. If `no',
the file will only be transferred if
the destination does not exist.
group: # Name of the group that should own the file/directory, as would be fed
to `chown'.
local_follow: # This flag indicates that filesystem links in the source tree, if they
exist, should be followed.
mode: # Mode the file or directory should be. For those used to
`/usr/bin/chmod' remember that modes
are actually octal numbers (like 0644).
Leaving off the leading zero will
likely have unexpected results. As of
version 1.8, the mode may be specified
as a symbolic mode (for example,
`u+rwx' or `u=rw,g=r,o=r').
owner: # Name of the user that should own the file/directory, as would be fed
to `chown'.
remote_src: # If `no', it will search for `src' at originating/master machine. If
`yes' it will go to the remote/target
machine for the `src'. Default is `no'.
Currently `remote_src' does not support
recursive copying.
selevel: # Level part of the SELinux file context. This is the MLS/MCS attribute,
sometimes known as the `range'.
`_default' feature works as for
`seuser'.
serole: # Role part of SELinux file context, `_default' feature works as for
`seuser'.
setype: # Type part of SELinux file context, `_default' feature works as for
`seuser'.
seuser: # User part of SELinux file context. Will default to system policy, if
applicable. If set to `_default', it
will use the `user' portion of the
policy if available.
src: # Local path to a file to copy to the remote server; can be absolute or
relative. If path is a directory, it is
copied recursively. In this case, if
path ends with "/", only inside
contents of that directory are copied
to destination. Otherwise, if it does
not end with "/", the directory itself
with all contents is copied. This
behavior is similar to Rsync.
unsafe_writes: # Normally this module uses atomic operations to prevent data corruption
or inconsistent reads from the target
files, sometimes systems are configured
or just broken in ways that prevent
this. One example are docker mounted
files, they cannot be updated
atomically and can only be done in an
unsafe manner. This boolean option
allows ansible to fall back to unsafe
methods of updating files for those
cases in which you do not have any
other choice. Be aware that this is
subject to race conditions and can lead
to data corruption.
validate: # The validation command to run before copying into place. The path to
the file to validate is passed in via
'%s' which must be present as in the
example below. The command is passed
securely so shell features like
expansion and pipes won't work.
參數說明：
src:指定本地文件
dest:指定目標存放位置
attributes:設置特殊屬性，參考chattr用法設置。
[root@localhost scripts]# ansible websers -m shell -a ' ls -l /root/'
192.168.0.218 | SUCCESS | rc=0 >>
total 4
-rw-r--r--. 1 root root 1329 Nov 10 15:03 centos7.cfg
192.168.0.99 | SUCCESS | rc=0 >>
total 0
drwxr-xr-x 2 root root 24 Aug 31 18:04 ansible
drwxr-xr-x 7 root root 95 Jul 11 11:21 docker-training
drwxr-xr-x 2 root root 42 Oct 24 21:51 scripts
[root@localhost scripts]# ansible websers -m copy -a 'src=/root/scripts/test.sh dest=/root/abc.sh attributes=i'
An exception occurred during task execution. To see the full traceback, use -vvv. The error was: Exception: Error while setting attributes: /usr/bin/chattr: Clearing extent flag not supported on /root/abc.sh
192.168.0.218 | FAILED! => {
"changed": false,
"checksum": "6881df2feb7905f64e082504920ddd5680a57004",
"details": "Error while setting attributes: /usr/bin/chattr: Clearing extent flag not supported on /root/abc.sh\n",
"gid": 0,
"group": "root",
"mode": "0644",
"msg": "chattr failed",
"owner": "root",
"path": "/root/abc.sh",
"secontext": "system_u:object_r:admin_home_t:s0",
"size": 22,
"state": "file",
"uid": 0
}
192.168.0.99 | SUCCESS => {
"changed": true,
"checksum": "6881df2feb7905f64e082504920ddd5680a57004",
"dest": "/root/abc.sh",
"gid": 0,
"group": "root",
"md5sum": "dff93f19a0413f60ffbd120633b4ee34",
"mode": "0644",
"owner": "root",
"size": 22,
"src": "/root/.ansible/tmp/ansible-tmp-1573468211.79-187329712764679/source",
"state": "file",
"uid": 0
}
[root@localhost scripts]# ansible websers -m shell -a ' lsattr /root/abc.sh'
192.168.0.218 | SUCCESS | rc=0 >>
-------------e- /root/abc.sh
192.168.0.99 | SUCCESS | rc=0 >>
----i----------- /root/abc.sh
[root@localhost scripts]#
說明：attributes這個參數就是給複製過去的文件設置特殊屬性。上面有一個主機失敗了，從報錯上看它說不支持，應該是不支持在上面設置屬性吧
backup：若是遠端節點文件存在是否建立備份文件（帶時間戳的備份文件），默認是不穿件備份文件
content：這個參數的做用就是把指定的內容重定向到目標文件（會清空原有內容），若目標文件不存在則建立，並把指定內容寫進目標文件裏
[root@localhost ~]# ansible websers -m shell -a 'ls -l /root/'
192.168.0.218 | SUCCESS | rc=0 >>
total 8
-rw-r--r--. 1 root root 22 Nov 11 18:30 abc.sh
-rw-r--r--. 1 root root 1329 Nov 10 15:03 centos7.cfg
192.168.0.99 | SUCCESS | rc=0 >>
total 4
-rw-r--r-- 1 root root 22 Nov 11 18:30 abc.sh
drwxr-xr-x 2 root root 24 Aug 31 18:04 ansible
drwxr-xr-x 7 root root 95 Jul 11 11:21 docker-training
drwxr-xr-x 2 root root 42 Oct 24 21:51 scripts
[root@localhost ~]# ansible websers -m copy -a 'content="this is test code" dest=/root/xxx.sh'
192.168.0.218 | SUCCESS => {
"changed": true,
"checksum": "2d350be9905412a6aa4b4eef6a0cce1a530211fc",
"dest": "/root/xxx.sh",
"gid": 0,
"group": "root",
"md5sum": "96a3052d9482b4052476f936a8812197",
"mode": "0644",
"owner": "root",
"secontext": "system_u:object_r:admin_home_t:s0",
"size": 17,
"src": "/root/.ansible/tmp/ansible-tmp-1573469143.3-271560421830999/source",
"state": "file",
"uid": 0
}
192.168.0.99 | SUCCESS => {
"changed": true,
"checksum": "2d350be9905412a6aa4b4eef6a0cce1a530211fc",
"dest": "/root/xxx.sh",
"gid": 0,
"group": "root",
"md5sum": "96a3052d9482b4052476f936a8812197",
"mode": "0644",
"owner": "root",
"size": 17,
"src": "/root/.ansible/tmp/ansible-tmp-1573469143.3-219990726355602/source",
"state": "file",
"uid": 0
}
[root@localhost ~]# ansible websers -m shell -a 'ls -l /root/'
192.168.0.218 | SUCCESS | rc=0 >>
total 12
-rw-r--r--. 1 root root 22 Nov 11 18:30 abc.sh
-rw-r--r--. 1 root root 1329 Nov 10 15:03 centos7.cfg
-rw-r--r--. 1 root root 17 Nov 11 18:45 xxx.sh
192.168.0.99 | SUCCESS | rc=0 >>
total 8
-rw-r--r-- 1 root root 22 Nov 11 18:30 abc.sh
drwxr-xr-x 2 root root 24 Aug 31 18:04 ansible
drwxr-xr-x 7 root root 95 Jul 11 11:21 docker-training
drwxr-xr-x 2 root root 42 Oct 24 21:51 scripts
-rw-r--r-- 1 root root 17 Nov 11 18:45 xxx.sh
[root@localhost ~]# ansible websers -m shell -a 'cat /root/xxx.sh'
192.168.0.218 | SUCCESS | rc=0 >>
this is test code
192.168.0.99 | SUCCESS | rc=0 >>
this is test code
[root@localhost ~]# ansible websers -m copy -a 'content="aaaaaabbbbcccc" dest=/root/xxx.sh'
192.168.0.218 | SUCCESS => {
"changed": true,
"checksum": "f9621459afd78104431857113fcb51a0de7fe4f6",
"dest": "/root/xxx.sh",
"gid": 0,
"group": "root",
"md5sum": "91fae9d1b9e046c172c0dc32e9e49927",
"mode": "0644",
"owner": "root",
"secontext": "system_u:object_r:admin_home_t:s0",
"size": 14,
"src": "/root/.ansible/tmp/ansible-tmp-1573469184.92-91500106972487/source",
"state": "file",
"uid": 0
}
192.168.0.99 | SUCCESS => {
"changed": true,
"checksum": "f9621459afd78104431857113fcb51a0de7fe4f6",
"dest": "/root/xxx.sh",
"gid": 0,
"group": "root",
"md5sum": "91fae9d1b9e046c172c0dc32e9e49927",
"mode": "0644",
"owner": "root",
"size": 14,
"src": "/root/.ansible/tmp/ansible-tmp-1573469184.91-254315055600695/source",
"state": "file",
"uid": 0
}
[root@localhost ~]# ansible websers -m shell -a 'cat /root/xxx.sh'
192.168.0.218 | SUCCESS | rc=0 >>
aaaaaabbbbcccc
192.168.0.99 | SUCCESS | rc=0 >>
aaaaaabbbbcccc
[root@localhost ~]#
說明：用content參數就不能用src ,它倆不能並存。
force：當本地文件和遠程節點文件內同不一樣時，是否強制替換遠程節點上的文件，默認是yes
root@localhost ~]# echo "abcd" > xxx
[root@localhost ~]# cat xxx
abcd
[root@localhost ~]#
[root@localhost ~]# ansible websers -m copy -a 'src=/root/xxx dest=/root/ '
192.168.0.218 | SUCCESS => {
"changed": true,
"checksum": "3330b4373640f9e4604991e73c7e86bfd8da2dc3",
"dest": "/root/xxx",
"gid": 0,
"group": "root",
"md5sum": "f5ac8127b3b6b85cdc13f237c6005d80",
"mode": "0644",
"owner": "root",
"secontext": "system_u:object_r:admin_home_t:s0",
"size": 5,
"src": "/root/.ansible/tmp/ansible-tmp-1573469866.04-139537054145957/source",
"state": "file",
"uid": 0
}
192.168.0.99 | SUCCESS => {
"changed": true,
"checksum": "3330b4373640f9e4604991e73c7e86bfd8da2dc3",
"dest": "/root/xxx",
"gid": 0,
"group": "root",
"md5sum": "f5ac8127b3b6b85cdc13f237c6005d80",
"mode": "0644",
"owner": "root",
"size": 5,
"src": "/root/.ansible/tmp/ansible-tmp-1573469866.03-263193889732743/source",
"state": "file",
"uid": 0
}
[root@localhost ~]# ansible websers -m shell -a 'cat /root/xxx'
192.168.0.218 | SUCCESS | rc=0 >>
abcd
192.168.0.99 | SUCCESS | rc=0 >>
abcd
[root@localhost ~]# echo "ffff" >> xxx
[root@localhost ~]# cat xxx
abcd
ffff
[root@localhost ~]# ansible websers -m copy -a 'src=/root/xxx dest=/root/ force=no'
192.168.0.218 | SUCCESS => {
"changed": false,
"dest": "/root/",
"src": "/root/xxx"
}
192.168.0.99 | SUCCESS => {
"changed": false,
"dest": "/root/",
"src": "/root/xxx"
}
[root@localhost ~]# ansible websers -m shell -a 'cat /root/xxx'
192.168.0.218 | SUCCESS | rc=0 >>
abcd
192.168.0.99 | SUCCESS | rc=0 >>
abcd
[root@localhost ~]# ansible websers -m copy -a 'src=/root/xxx dest=/root/ force=yes'
192.168.0.218 | SUCCESS => {
"changed": true,
"checksum": "49cd3629c9a54aa81f1d45d99d2de3e80f12a149",
"dest": "/root/xxx",
"gid": 0,
"group": "root",
"md5sum": "4ec7669871a98be915dfc335eda01418",
"mode": "0644",
"owner": "root",
"secontext": "system_u:object_r:admin_home_t:s0",
"size": 10,
"src": "/root/.ansible/tmp/ansible-tmp-1573469933.25-83137410532362/source",
"state": "file",
"uid": 0
}
192.168.0.99 | SUCCESS => {
"changed": true,
"checksum": "49cd3629c9a54aa81f1d45d99d2de3e80f12a149",
"dest": "/root/xxx",
"gid": 0,
"group": "root",
"md5sum": "4ec7669871a98be915dfc335eda01418",
"mode": "0644",
"owner": "root",
"size": 10,
"src": "/root/.ansible/tmp/ansible-tmp-1573469933.24-211729757258043/source",
"state": "file",
"uid": 0
}
[root@localhost ~]# ansible websers -m shell -a 'cat /root/xxx'
192.168.0.218 | SUCCESS | rc=0 >>
abcd
ffff
192.168.0.99 | SUCCESS | rc=0 >>
abcd
ffff
[root@localhost ~]#
group：設置文件或目錄的所屬組
mode：設置文件或目錄權限（權限支持數字表示法如0644，也支持u+rw,g-wx,o-rwx,也支持u=rw,g=r,o=r）
owner：設置文件或目錄的屬主和屬組（如有group指定屬組，則以group爲準，若沒有group指定則同屬主同名的組）
[root@localhost ~]# ll
total 0
drwxr-xr-x. 2 root root 41 Nov 11 00:45 ansible
drwxr-xr-x. 2 root root 37 Nov 11 18:49 scripts
[root@localhost ~]# ll scripts/
total 8
-rw-------. 1 root root 22 Nov 11 18:22 test.sh
-rw-r--r--. 1 root root 8 Nov 11 18:49 test.txt
[root@localhost ~]# ansible websers -m copy -a 'src=/root/scripts dest=/root/ owner=qiuhom mode=0777 group=root'
192.168.0.218 | SUCCESS => {
"changed": true,
"dest": "/root/",
"src": "/root/scripts"
}
192.168.0.99 | SUCCESS => {
"changed": true,
"dest": "/root/",
"src": "/root/scripts"
}
[root@localhost ~]# ansible websers -m shell -a 'ls -l /root/'
192.168.0.218 | SUCCESS | rc=0 >>
total 4
drwxr-xr-x. 2 qiuhom root 4096 Nov 11 19:18 scripts
192.168.0.99 | SUCCESS | rc=0 >>
total 0
drwxr-xr-x 2 qiuhom root 37 Nov 11 19:18 scripts
[root@localhost ~]# ansible websers -m shell -a 'ls -l /root/scripts/'
192.168.0.218 | SUCCESS | rc=0 >>
total 8
-rwxrwxrwx. 1 qiuhom root 22 Nov 11 19:18 test.sh
-rwxrwxrwx. 1 qiuhom root 8 Nov 11 19:18 test.txt
192.168.0.99 | SUCCESS | rc=0 >>
total 8
-rwxrwxrwx 1 qiuhom root 22 Nov 11 19:18 test.sh
-rwxrwxrwx 1 qiuhom root 8 Nov 11 19:18 test.txt
[root@localhost ~]#
說明：咱們在複製整個目錄的時候，若目標節點沒有該目錄則複製過去的目錄的屬主、所屬組同咱們設定的同樣，目錄權限不會更改，但目錄下的全部文件會改變爲咱們指定的權限屬組和屬主；若目標節點存在該目錄，則目錄的的屬組和所屬組權限都不會發生改變，且目錄原下原有的文件也不會發生變化，變化的只是咱們複製過去目錄下的文件。這裏還要說一點就是若是目錄下還有目錄，那麼針對目錄下的目錄權限通常都是755不會發生變，權限的改變只是針對文件。總結一點，在咱們複製目錄時，權限的指定只有文件生效，目錄不生效，屬組和屬主的指定，若目標節點存在，則不生效，若不存在則生效。
六、fetch：此模塊的做用是從遠端節點獲取指定文件，並將保存至本地，按主機名組織，此模塊的工做同copy模塊相似，可是它們是相反着的
模塊幫助：
[root@localhost ~]# ansible-doc -s fetch
- name: Fetches a file from remote nodes
fetch:
dest: # (required) A directory to save the file into. For example, if the `dest' directory is `/backup' a `src'
file named `/etc/profile' on host `host.example.com', would be saved into
`/backup/host.example.com/etc/profile'
fail_on_missing: # When set to 'yes', the task will fail if the remote file cannot be read for any reason. Prior to
Ansible-2.4, setting this would only fail if the source file was missing.
The default was changed to "yes" in Ansible-2.4.
flat: # Allows you to override the default behavior of appending hostname/path/to/file to the destination. If
dest ends with '/', it will use the basename of the source file, similar
to the copy module. Obviously this is only handy if the filenames are
unique.
src: # (required) The file on the remote system to fetch. This `must' be a file, not a directory. Recursive
fetching may be supported in a later release.
validate_checksum: # Verify that the source and destination checksums match after the files are fetched.
[root@localhost ~]#
參數說明：
dest:指定保存本地到本地的目錄
src:指定遠端節點上的文件，必須是文件不能是目錄，它暫時不支持目錄遞歸拉取（若是是目錄能夠先打包成tar文件，而後再拉取）
flat:容許您覆蓋將hostname/path/to/file附加到目標的默認行爲。若是dest以'/'結尾，它將使用源文件的基本名，相似於copy模塊。顯然，這隻有在文件名是唯一的狀況下才有用
[root@localhost test]# ls
[root@localhost test]#
[root@localhost test]# ansible websers -m fetch -a 'src=/etc/fstab dest=/root/test/ flat=yes'
192.168.0.218 | SUCCESS => {
"changed": true,
"checksum": "7c3fe681918844ddaf6c94799731779e75c58a86",
"dest": "/root/test/fstab",
"md5sum": "192121480e9db76108c3ed80aa10e010",
"remote_checksum": "7c3fe681918844ddaf6c94799731779e75c58a86",
"remote_md5sum": null
}
192.168.0.99 | SUCCESS => {
"changed": true,
"checksum": "68765861c07a0674ef0838168ccf2e69c93529d4",
"dest": "/root/test/fstab",
"md5sum": "f377fd21c0038a2886fd3c096d706eae",
"remote_checksum": "68765861c07a0674ef0838168ccf2e69c93529d4",
"remote_md5sum": null
}
[root@localhost test]# ls
fstab
[root@localhost test]# ll
total 4
-rw-r--r--. 1 root root 552 Nov 11 19:55 fstab
[root@localhost test]# ansible websers -m fetch -a 'src=/etc/fstab dest=/root/test/ '
192.168.0.218 | SUCCESS => {
"changed": true,
"checksum": "7c3fe681918844ddaf6c94799731779e75c58a86",
"dest": "/root/test/192.168.0.218/etc/fstab",
"md5sum": "192121480e9db76108c3ed80aa10e010",
"remote_checksum": "7c3fe681918844ddaf6c94799731779e75c58a86",
"remote_md5sum": null
}
192.168.0.99 | SUCCESS => {
"changed": true,
"checksum": "68765861c07a0674ef0838168ccf2e69c93529d4",
"dest": "/root/test/192.168.0.99/etc/fstab",
"md5sum": "f377fd21c0038a2886fd3c096d706eae",
"remote_checksum": "68765861c07a0674ef0838168ccf2e69c93529d4",
"remote_md5sum": null
}
[root@localhost test]# ls
192.168.0.218 192.168.0.99 fstab
[root@localhost test]#
[root@localhost test]# ll
total 4
drwxr-xr-x. 3 root root 17 Nov 11 19:56 192.168.0.218
drwxr-xr-x. 3 root root 17 Nov 11 19:56 192.168.0.99
-rw-r--r--. 1 root root 552 Nov 11 19:55 fstab
[root@localhost test]# tree
.
├── 192.168.0.218
│ └── etc
│ └── fstab
├── 192.168.0.99
│ └── etc
│ └── fstab
└── fstab
4 directories, 3 files
[root@localhost test]#
七、file：此模塊的做用是管理目標節點文件（新建、設置權限，刪除文件等操做）
模塊幫助：
[root@localhost ~]# ansible-doc -s file
- name: Sets attributes of files
file:
attributes: # Attributes the file or directory should have. To get supported flags look at the man page for `chattr'
on the target system. This string should contain the attributes in the
same order as the one displayed by `lsattr'.
follow: # This flag indicates that filesystem links, if they exist, should be followed.
force: # force the creation of the symlinks in two cases: the source file does not exist (but will appear later);
the destination exists and is a file (so, we need to unlink the "path"
file and create symlink to the "src" file in place of it).
group: # Name of the group that should own the file/directory, as would be fed to `chown'.
mode: # Mode the file or directory should be. For those used to `/usr/bin/chmod' remember that modes are
actually octal numbers (like 0644). Leaving off the leading zero will
likely have unexpected results. As of version 1.8, the mode may be
specified as a symbolic mode (for example, `u+rwx' or `u=rw,g=r,o=r').
owner: # Name of the user that should own the file/directory, as would be fed to `chown'.
path: # (required) path to the file being managed. Aliases: `dest', `name'
recurse: # recursively set the specified file attributes (applies only to state=directory)
selevel: # Level part of the SELinux file context. This is the MLS/MCS attribute, sometimes known as the `range'.
`_default' feature works as for `seuser'.
serole: # Role part of SELinux file context, `_default' feature works as for `seuser'.
setype: # Type part of SELinux file context, `_default' feature works as for `seuser'.
seuser: # User part of SELinux file context. Will default to system policy, if applicable. If set to `_default',
it will use the `user' portion of the policy if available.
src: # path of the file to link to (applies only to `state=link'). Will accept absolute, relative and
nonexisting paths. Relative paths are not expanded.
state: # If `directory', all immediate subdirectories will be created if they do not exist, since 1.7 they will
be created with the supplied permissions. If `file', the file will NOT be
created if it does not exist, see the [copy] or [template] module if you
want that behavior. If `link', the symbolic link will be created or
changed. Use `hard' for hardlinks. If `absent', directories will be
recursively deleted, and files or symlinks will be unlinked. Note that
`absent' will not cause `file' to fail if the `path' does not exist as
the state did not change. If `touch' (new in 1.4), an empty file will be
created if the `path' does not exist, while an existing file or directory
will receive updated file access and modification times (similar to the
way `touch` works from the command line).
unsafe_writes: # Normally this module uses atomic operations to prevent data corruption or inconsistent reads from the
target files, sometimes systems are configured or just broken in ways
that prevent this. One example are docker mounted files, they cannot be
updated atomically and can only be done in an unsafe manner. This boolean
option allows ansible to fall back to unsafe methods of updating files
for those cases in which you do not have any other choice. Be aware that
this is subject to race conditions and can lead to data corruption.
[root@localhost ~]#
參數說明：
attributes：設置目標節點文件的特殊屬性，特殊屬性參考chattr命令
group：設置目標文件的屬組
mode：設置目標文件的權限（權限支持數字表示法如0644，也支持u+rw,g-wx,o-rwx,也支持u=rw,g=r,o=r）
owner：設置目標文件的屬組和屬主（如有group指定屬組，則以group爲準，若沒有group指定則同屬主同名的組）
path：被管理文件的路徑，別名（name、dest），也就被管理的文件咱們能夠用name指定，也能夠用dest指定
src：要連接到的文件的路徑(僅適用於' state=link'或者‘state=hard’)。
state：這個選項相當重要，它表示咱們怎麼管理文件，其中link表示建立軟鏈接，hard或者hardlinks表示建立硬連接，touch表示建立空文件，directory表示建立目錄（前提是目標不存在此目錄），absent表示刪除
1)新建文件
[root@localhost test]# ansible websers -m shell -a 'ls -l /root'
192.168.0.218 | SUCCESS | rc=0 >>
total 8
drwxr-xr-x. 2 qiuhom root 4096 Nov 11 19:18 scripts
drwxr-xr-x. 3 qiuhom root 4096 Nov 11 19:28 test
192.168.0.99 | SUCCESS | rc=0 >>
total 0
drwxr-xr-x 2 qiuhom root 37 Nov 11 19:18 scripts
drwxr-xr-x 3 qiuhom root 27 Nov 11 19:28 test
[root@localhost test]# ansible websers -m file -a 'path=/root/f1 state=touch'
192.168.0.218 | SUCCESS => {
"changed": true,
"dest": "/root/f1",
"gid": 0,
"group": "root",
"mode": "0644",
"owner": "root",
"secontext": "unconfined_u:object_r:admin_home_t:s0",
"size": 0,
"state": "file",
"uid": 0
}
192.168.0.99 | SUCCESS => {
"changed": true,
"dest": "/root/f1",
"gid": 0,
"group": "root",
"mode": "0644",
"owner": "root",
"size": 0,
"state": "file",
"uid": 0
}
[root@localhost test]# ansible websers -m shell -a 'ls -l /root'
192.168.0.218 | SUCCESS | rc=0 >>
total 8
-rw-r--r--. 1 root root 0 Nov 11 20:48 f1
drwxr-xr-x. 2 qiuhom root 4096 Nov 11 19:18 scripts
drwxr-xr-x. 3 qiuhom root 4096 Nov 11 19:28 test
192.168.0.99 | SUCCESS | rc=0 >>
total 0
-rw-r--r-- 1 root root 0 Nov 11 20:48 f1
drwxr-xr-x 2 qiuhom root 37 Nov 11 19:18 scripts
drwxr-xr-x 3 qiuhom root 27 Nov 11 19:28 test
[root@localhost test]#
說明：新建空文件的同時能夠指定權限屬主等信息，同copy模塊設置權限屬組屬主用法同樣，這裏再也不演示
2）新建目錄
[root@localhost test]# ansible websers -m file -a 'path=/root/dir1 state=directory'
192.168.0.218 | SUCCESS => {
"changed": true,
"gid": 0,
"group": "root",
"mode": "0755",
"owner": "root",
"path": "/root/dir1",
"secontext": "unconfined_u:object_r:admin_home_t:s0",
"size": 4096,
"state": "directory",
"uid": 0
}
192.168.0.99 | SUCCESS => {
"changed": true,
"gid": 0,
"group": "root",
"mode": "0755",
"owner": "root",
"path": "/root/dir1",
"size": 6,
"state": "directory",
"uid": 0
}
[root@localhost test]# ansible websers -m shell -a 'ls -l /root'
192.168.0.218 | SUCCESS | rc=0 >>
total 12
drwxr-xr-x. 2 root root 4096 Nov 11 20:51 dir1
-rw-r--r--. 1 root root 0 Nov 11 20:48 f1
drwxr-xr-x. 2 qiuhom root 4096 Nov 11 19:18 scripts
drwxr-xr-x. 3 qiuhom root 4096 Nov 11 19:28 test
192.168.0.99 | SUCCESS | rc=0 >>
total 0
drwxr-xr-x 2 root root 6 Nov 11 20:51 dir1
-rw-r--r-- 1 root root 0 Nov 11 20:48 f1
drwxr-xr-x 2 qiuhom root 37 Nov 11 19:18 scripts
drwxr-xr-x 3 qiuhom root 27 Nov 11 19:28 test
[root@localhost test]#
3）新建軟鏈接
[root@localhost test]# ansible websers -m file -a 'src=/root/f1 path=/root/f1.link state=link'
192.168.0.218 | SUCCESS => {
"changed": true,
"dest": "/root/f1.link",
"gid": 0,
"group": "root",
"mode": "0777",
"owner": "root",
"secontext": "unconfined_u:object_r:admin_home_t:s0",
"size": 8,
"src": "/root/f1",
"state": "link",
"uid": 0
}
192.168.0.99 | SUCCESS => {
"changed": true,
"dest": "/root/f1.link",
"gid": 0,
"group": "root",
"mode": "0777",
"owner": "root",
"size": 8,
"src": "/root/f1",
"state": "link",
"uid": 0
}
[root@localhost test]# ansible websers -m shell -a 'ls -l /root'
192.168.0.218 | SUCCESS | rc=0 >>
total 12
drwxr-xr-x. 2 root root 4096 Nov 11 20:51 dir1
-rw-r--r--. 1 root root 0 Nov 11 20:48 f1
lrwxrwxrwx. 1 root root 8 Nov 11 20:52 f1.link -> /root/f1
drwxr-xr-x. 2 qiuhom root 4096 Nov 11 19:18 scripts
drwxr-xr-x. 3 qiuhom root 4096 Nov 11 19:28 test
192.168.0.99 | SUCCESS | rc=0 >>
total 0
drwxr-xr-x 2 root root 6 Nov 11 20:51 dir1
-rw-r--r-- 1 root root 0 Nov 11 20:48 f1
lrwxrwxrwx 1 root root 8 Nov 11 20:52 f1.link -> /root/f1
drwxr-xr-x 2 qiuhom root 37 Nov 11 19:18 scripts
drwxr-xr-x 3 qiuhom root 27 Nov 11 19:28 test
[root@localhost test]#
4）新建硬連接
[root@localhost test]# ansible websers -m file -a 'src=/root/f1 path=/root/f1.hard state=hard'
192.168.0.218 | SUCCESS => {
"changed": true,
"dest": "/root/f1.hard",
"gid": 0,
"group": "root",
"mode": "0644",
"owner": "root",
"secontext": "unconfined_u:object_r:admin_home_t:s0",
"size": 0,
"src": "/root/f1",
"state": "hard",
"uid": 0
}
192.168.0.99 | SUCCESS => {
"changed": true,
"dest": "/root/f1.hard",
"gid": 0,
"group": "root",
"mode": "0644",
"owner": "root",
"size": 0,
"src": "/root/f1",
"state": "hard",
"uid": 0
}
[root@localhost test]# ansible websers -m shell -a 'ls -l /root'
192.168.0.218 | SUCCESS | rc=0 >>
total 12
drwxr-xr-x. 2 root root 4096 Nov 11 20:51 dir1
-rw-r--r--. 2 root root 0 Nov 11 20:48 f1
-rw-r--r--. 2 root root 0 Nov 11 20:48 f1.hard
lrwxrwxrwx. 1 root root 8 Nov 11 20:52 f1.link -> /root/f1
drwxr-xr-x. 2 qiuhom root 4096 Nov 11 19:18 scripts
drwxr-xr-x. 3 qiuhom root 4096 Nov 11 19:28 test
192.168.0.99 | SUCCESS | rc=0 >>
total 0
drwxr-xr-x 2 root root 6 Nov 11 20:51 dir1
-rw-r--r-- 2 root root 0 Nov 11 20:48 f1
-rw-r--r-- 2 root root 0 Nov 11 20:48 f1.hard
lrwxrwxrwx 1 root root 8 Nov 11 20:52 f1.link -> /root/f1
drwxr-xr-x 2 qiuhom root 37 Nov 11 19:18 scripts
drwxr-xr-x 3 qiuhom root 27 Nov 11 19:28 test
[root@localhost test]#
5）刪除
root@localhost test]# ansible websers -m file -a 'path=/root/f1.hard state=absent'
192.168.0.218 | SUCCESS => {
"changed": true,
"path": "/root/f1.hard",
"state": "absent"
}
192.168.0.99 | SUCCESS => {
"changed": true,
"path": "/root/f1.hard",
"state": "absent"
}
[root@localhost test]# ansible websers -m file -a 'path=/root/f1.link state=absent'
192.168.0.218 | SUCCESS => {
"changed": true,
"path": "/root/f1.link",
"state": "absent"
}
192.168.0.99 | SUCCESS => {
"changed": true,
"path": "/root/f1.link",
"state": "absent"
}
[root@localhost test]# ansible websers -m file -a 'path=/root/f1 state=absent'
192.168.0.218 | SUCCESS => {
"changed": true,
"path": "/root/f1",
"state": "absent"
}
192.168.0.99 | SUCCESS => {
"changed": true,
"path": "/root/f1",
"state": "absent"
}
[root@localhost test]# ansible websers -m file -a 'path=/root/dir1 state=absent'
192.168.0.218 | SUCCESS => {
"changed": true,
"path": "/root/dir1",
"state": "absent"
}
192.168.0.99 | SUCCESS => {
"changed": true,
"path": "/root/dir1",
"state": "absent"
}
[root@localhost test]# ansible websers -m shell -a 'ls -l /root'
192.168.0.218 | SUCCESS | rc=0 >>
total 8
drwxr-xr-x. 2 qiuhom root 4096 Nov 11 19:18 scripts
drwxr-xr-x. 3 qiuhom root 4096 Nov 11 19:28 test
192.168.0.99 | SUCCESS | rc=0 >>
total 0
drwxr-xr-x 2 qiuhom root 37 Nov 11 19:18 scripts
drwxr-xr-x 3 qiuhom root 27 Nov 11 19:28 test
[root@localhost test]#
說明：刪除動做只須要給定state=absent就好，至於目標文件究竟是什麼咱們不關心，咱們指定目標文件是目錄就刪除目錄，是文件就刪除文件；這裏須要說一下的是，若是指定目標目錄是掛載點，指定的目錄不能被刪除，可是目錄下的文件會被刪除。
相關文章
- 1. ansible經常使用模塊
- 2. ansible-經常使用模塊
- 3. Ansible經常使用模塊
- 4. Ansible 經常使用模塊
- 5. Ansible--經常使用模塊
- 6. Ansible之經常使用模塊（二）
- 7. Ansible--經常使用模塊使用
- 8. ansible使用一（ansible的安裝及ansible經常使用模塊的使用）
- 9. ansible經常使用模塊用法
- 10. ansible經常使用模塊介紹
- 更多相關文章...
- • Lua 模塊與包 - Lua 教程
- • DTD - XML 構建模塊 - DTD 教程
- • Java Agent入門實戰（一）-Instrumentation介紹與使用
- • 委託模式
相關標籤/搜索
每日一句
-
每一个你不满意的现在，都有一个你没有努力的曾经。
歡迎關注本站公眾號,獲取更多信息
相關文章