ensp靜態理由的配置

1.搭建拓撲圖（如圖所示） 2.給三個路由器配置三個端口的IP地址 [R1-GigabitEthernet0/0/1]ip address 10.0.12.1 24 [R1-GigabitEthernet0/0/0]ip address 10.0.13.1 24 [R1-Ethernet0/0/0]ip address 10.0.1.1 24 [R2-GigabitEthernet0/0/2]ip

>>阅读原文<<