win10下一分鐘快速搭建rtmp推流服務器

爲了讓你們少踩筆者踩過的坑，目前將工做中搭建rtmp推流服務器的步驟總結以下:php

步驟1: 下載 nginx 1.7.11.3 Gryphoncss

下載連接: http://nginx-win.ecsds.eu/download/nginx 1.7.11.3 Gryphon.zip，下載完成後解壓，將解壓後的目錄命名爲nginx_1.7.11.3_Gryphonhtml

（此處注意千萬不要命名爲nginx-1.7.11.3-Gryphon，筆者初次搭建rtmp推流服務器時，將解壓後的目錄命名爲nginx-1.7.11.3-Gryphon，出現局域網內的其餘電腦都沒法訪問rtmp服務器的問題，也是花了一天的時間填坑，將主文件名改成nginx_1.7.11.3_Gryphon時，其餘電腦才能正常訪問。爲神馬會如此，筆者也是疑問，好歹問題無心間解決了）nginx

步驟2：下載服務器狀態檢查程序 stat.xsl（注：直接clone到nginx-1.7.11.3-Gryphon目錄下）git

下載地址https://github.com/arut/nginx-rtmp-module/github

此時的目錄結構以下圖所示:bash

步驟3：配置文件 conf\nginx-win-rtmp.conf 內容以下:服務器

#user nobody; # multiple workers works !
worker_processes  2; #error_log logs/error.log; #error_log logs/error.log notice; #error_log logs/error.log info;

#pid logs/nginx.pid; #worker_rlimit_nofile 100000; #更改worker進程的最大打開文件數限制
                                               #若是沒設置的話, 這個值爲操做系統的限制.
                                               #設置後你的操做系統和Nginx能夠處理比「ulimit -a」更多的文件
                                               #因此把這個值設高, 這樣nginx就不會有「too many open files」問題了
 events { worker_connections 8192;#設置可由一個worker進程同時打開的最大鏈接數
                              #若是設置了上面提到的worker_rlimit_nofile, 咱們能夠將這個值設得很高
    # max value 32768, nginx recycling connections+registry optimization = 
    # this.value * 20 = max concurrent connections currently tested with one worker
    # C1000K should be possible depending there is enough ram/cpu power
    # multi_accept on;
} rtmp { server { listen 1935;#監聽端口,若被佔用,能夠更改
        chunk_size 4000;#上傳flv文件塊兒的大小
        application live { #建立一個叫live的應用
             live on;#開啓live的應用
             allow publish 127.0.0.1;#  allow play all; } } } http { #include /nginx/conf/naxsi_core.rules;
 include mime.types; default_type application/octet-stream; #log_format main '$remote_addr:$remote_port - $remote_user [$time_local] "$request" '
    # '$status $body_bytes_sent "$http_referer" '
    # '"$http_user_agent" "$http_x_forwarded_for"';

    #access_log logs/access.log main;

# # loadbalancing PHP # upstream myLoadBalancer { # server 127.0.0.1:9001 weight=1 fail_timeout=5; # server 127.0.0.1:9002 weight=1 fail_timeout=5; # server 127.0.0.1:9003 weight=1 fail_timeout=5; # server 127.0.0.1:9004 weight=1 fail_timeout=5; # server 127.0.0.1:9005 weight=1 fail_timeout=5; # server 127.0.0.1:9006 weight=1 fail_timeout=5; # server 127.0.0.1:9007 weight=1 fail_timeout=5; # server 127.0.0.1:9008 weight=1 fail_timeout=5; # server 127.0.0.1:9009 weight=1 fail_timeout=5; # server 127.0.0.1:9010 weight=1 fail_timeout=5; # least_conn; # }
 sendfile off; #tcp_nopush on;
 server_names_hash_bucket_size 128; ## Start: Timeouts ##
    client_body_timeout   10; client_header_timeout 10; keepalive_timeout 30; send_timeout 10; keepalive_requests 10; ## End: Timeouts ##

    #gzip on;
 server { listen 8088; server_name localhost; #charset koi8-r;

        #access_log logs/host.access.log main;

        ## Caching Static Files, put before first location
        #location ~* \.(jpg|jpeg|png|gif|ico|css|js)$ {
        # expires 14d;
        # add_header Vary Accept-Encoding;
        #}

# For Naxsi remove the single # line for learn mode, or the ## lines for full WAF mode
        location / { #include /nginx/conf/mysite.rules; # see also http block naxsi include line
            ##SecRulesEnabled;
              ##DeniedUrl "/RequestDenied";
              ##CheckRule "$SQL >= 8" BLOCK;
              ##CheckRule "$RFI >= 8" BLOCK;
              ##CheckRule "$TRAVERSAL >= 4" BLOCK;
              ##CheckRule "$XSS >= 8" BLOCK;
 root html; index index.html index.htm; } # For Naxsi remove the ## lines for full WAF mode, redirect location block used by naxsi
        ##location /RequestDenied {
        ## return 412;
        ##}

## Lua examples ! # location /robots.txt { # rewrite_by_lua ' # if ngx.var.http_host ~= "localhost" then # return ngx.exec("/robots_disallow.txt"); # end # '; # }

        #error_page 404 /404.html;

        # redirect server error pages to the static page /50x.html
        #         error_page   500 502 503 504  /50x.html; location = /50x.html { root html; } # proxy the PHP scripts to Apache listening on 127.0.0.1:80
        #         #location ~ \.php$ {
        # proxy_pass http://127.0.0.1;
        #}

        # pass the PHP scripts to FastCGI server listening on 127.0.0.1:9000
        #         #location ~ \.php$ {
        # root html;
        # fastcgi_pass 127.0.0.1:9000; # single backend process
        # fastcgi_pass myLoadBalancer; # or multiple, see example above
        # fastcgi_index index.php;
        # fastcgi_param SCRIPT_FILENAME $document_root$fastcgi_script_name;
        # include fastcgi_params;
        #}

        # deny access to .htaccess files, if Apache's document root
        # concurs with nginx's one
        #         #location ~ /\.ht {
        # deny all;
        #}
 } # another virtual host using mix of IP-, name-, and port-based configuration
    #     #server {
    # listen 8000;
    # listen somename:8080;
    # server_name somename alias another.alias;

    # location / {
    # root html;
    # index index.html index.htm;
    # }
    #}


    # HTTPS server
    #     #server {
    # listen 443 ssl spdy;
    # server_name localhost;

    # ssl on;
    # ssl_certificate cert.pem;
    # ssl_certificate_key cert.key;

    # ssl_session_timeout 5m;

    # ssl_prefer_server_ciphers On;
    # ssl_protocols TLSv1 TLSv1.1 TLSv1.2;
    # ssl_ciphers ECDH+AESGCM:ECDH+AES256:ECDH+AES128:ECDH+3DES:RSA+AESGCM:RSA+AES:RSA+3DES:!aNULL:!eNULL:!MD5:!DSS:!EXP:!ADH:!LOW:!MEDIUM;

    # location / {
    # root html;
    # index index.html index.htm;
    # }
    #}
 }

nginx-win-rtmp.conf

步驟4：啓動服務器session

nginx.exe -c conf\nginx-win-rtmp.confapp

步驟5：使用推流地址

推流地址:rtmp://lP:監聽端口/應用名/home，步驟3配置文件配置出的推流地址爲rtmp://192.168.xxxx.xxxx:1935/live/home

經過此推流地址，即可以成功推流

步驟6:其餘ngnix經常使用命令:

（1）終止服務器

nginx.exe -s stop

stop是快速中止nginx，可能並不保存相關信息；

nginx.exe -s quit

quit是完整有序的中止nginx，並保存相關信息。

（2）從新載入Nginx

nginx.exe -s reload

當配置信息修改，須要從新載入這些配置時使用此命令。

（3）從新打開日誌文件

nginx.exe -s reopen

>>>>>>>>待續