k8s集羣中遇到etcd集羣故障的排查思路

一次在k8s集羣中建立實例發現etcd集羣狀態出現鏈接失敗情況，致使建立實例失敗。因而排查了一下緣由。

問題來源

下面是etcd集羣健康狀態：

1 2 3 4 5 6 7 8 9 10 11

[root@docker01 ~] # cd /opt/kubernetes/ssl/ [root@docker01 ssl] # /opt/kubernetes/bin/etcdctl \ > --ca- file =ca.pem --cert- file =server.pem --key- file =server-key.pem \ > --endpoints= "https://10.0.0.99:2379,https://10.0.0.100:2379,https://10.0.0.111:2379" \ > cluster-health member 1bd4d12de986e887 is healthy: got healthy result from https: //10 .0.0.99:2379 member 45396926a395958b is healthy: got healthy result from https: //10 .0.0.100:2379 failed to check the health of member c2c5804bd87e2884 on https: //10 .0.0.111:2379: Get https: //10 .0.0.111:2379 /health : net /http : TLS handshake timeout member c2c5804bd87e2884 is unreachable: [https: //10 .0.0.111:2379] are all unreachable cluster is healthy [root@docker01 ssl] #

能夠明顯看到etcd節點03出現問題。

這個時候到節點03上來重啓etcd服務以下：

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34

[root@docker03 ~] # systemctl restart etcd Job for etcd.service failed because the control process exited with error code. See "systemctl status etcd.service" and "journalctl -xe" for details. [root@docker03 ~] # journalctl -xe Mar 24 22:24:32 docker03 etcd[1895]: setting maximum number of CPUs to 1, total number of available CPUs is 1 Mar 24 22:24:32 docker03 etcd[1895]: the server is already initialized as member before, starting as etcd member... Mar 24 22:24:32 docker03 etcd[1895]: peerTLS: cert = /opt/kubernetes/ssl/server .pem, key = /opt/kubernetes/ssl/server-key .pem, ca = , trusted-ca = /opt/kubernetes/ssl Mar 24 22:24:32 docker03 etcd[1895]: listening for peers on https: //10 .0.0.111:2380 Mar 24 22:24:32 docker03 etcd[1895]: The scheme of client url http: //127 .0.0.1:2379 is HTTP while peer key /cert files are presented. Ignored key /cert files. Mar 24 22:24:32 docker03 etcd[1895]: listening for client requests on 127.0.0.1:2379 Mar 24 22:24:32 docker03 etcd[1895]: listening for client requests on 10.0.0.111:2379 Mar 24 22:24:32 docker03 etcd[1895]: member c2c5804bd87e2884 has already been bootstrapped Mar 24 22:24:32 docker03 systemd[1]: etcd.service: main process exited, code=exited, status=1 /FAILURE Mar 24 22:24:32 docker03 systemd[1]: Failed to start Etcd Server. -- Subject: Unit etcd.service has failed -- Defined-By: systemd -- Support: http: //lists .freedesktop.org /mailman/listinfo/systemd-devel -- -- Unit etcd.service has failed. -- -- The result is failed. Mar 24 22:24:32 docker03 systemd[1]: Unit etcd.service entered failed state. Mar 24 22:24:32 docker03 systemd[1]: etcd.service failed. Mar 24 22:24:33 docker03 systemd[1]: etcd.service holdoff time over, scheduling restart. Mar 24 22:24:33 docker03 systemd[1]: start request repeated too quickly for etcd.service Mar 24 22:24:33 docker03 systemd[1]: Failed to start Etcd Server. -- Subject: Unit etcd.service has failed -- Defined-By: systemd -- Support: http: //lists .freedesktop.org /mailman/listinfo/systemd-devel -- -- Unit etcd.service has failed. -- -- The result is failed. Mar 24 22:24:33 docker03 systemd[1]: Unit etcd.service entered failed state. Mar 24 22:24:33 docker03 systemd[1]: etcd.service failed.

並無成功啓動服務，能夠看到提示信息：member c2c5804bd87e2884 has already been bootstrapped

查看資料說是：
One of the member was bootstrapped via discovery service. You must remove the previous data-dir to clean up the member information. Or the member will ignore the new configuration and start with the old configuration. That is why you see the mismatch.
大概意思：
其中一個成員是經過discovery service引導的。必須刪除之前的數據目錄來清理成員信息。不然成員將忽略新配置，使用舊配置。這就是爲何你看到了不匹配。
看到了這裏，問題所在也就很明確了，啓動失敗的緣由在於data-dir （/var/lib/etcd/default.etcd）中記錄的信息與 etcd啓動的選項所標識的信息不太匹配形成的。

問題解決

第一種方式咱們能夠經過修改啓動參數解決這類錯誤。既然 data-dir 中已經記錄信息，咱們就不必在啓動項中加入多於配置。具體修改--initial-cluster-state參數：

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31

[root@docker03 ~] # cat /usr/lib/systemd/system/etcd.service [Unit] Description=Etcd Server After=network.target After=network-online.target Wants=network-online.target   [Service] Type=notify EnvironmentFile=- /opt/kubernetes/cfg/etcd ExecStart= /opt/kubernetes/bin/etcd \ --name=${ETCD_NAME} \ --data- dir =${ETCD_DATA_DIR} \ --listen-peer-urls=${ETCD_LISTEN_PEER_URLS} \ --listen-client-urls=${ETCD_LISTEN_CLIENT_URLS},http: //127 .0.0.1:2379 \ --advertise-client-urls=${ETCD_ADVERTISE_CLIENT_URLS} \ --initial-advertise-peer-urls=${ETCD_INITIAL_ADVERTISE_PEER_URLS} \ --initial-cluster=${ETCD_INITIAL_CLUSTER} \ --initial-cluster-token=${ETCD_INITIAL_CLUSTER} \ --initial-cluster-state=existing \  # 將new這個參數修改爲existing，啓動正常！ --cert- file = /opt/kubernetes/ssl/server .pem \ --key- file = /opt/kubernetes/ssl/server-key .pem \ --peer-cert- file = /opt/kubernetes/ssl/server .pem \ --peer-key- file = /opt/kubernetes/ssl/server-key .pem \ --trusted-ca- file = /opt/kubernetes/ssl/ca .pem \ --peer-trusted-ca- file = /opt/kubernetes/ssl/ca .pem Restart=on-failure LimitNOFILE=65536   [Install] WantedBy=multi-user.target

咱們將 --initial-cluster-state=new 修改爲  --initial-cluster-state=existing，再次從新啓動就ok了。

第二種方式刪除全部etcd節點的 data-dir 文件（不刪也行），重啓各個節點的etcd服務，這個時候，每一個節點的data-dir的數據都會被更新，就不會有以上故障了。

第三種方式是複製其餘節點的data-dir中的內容，以此爲基礎上以 --force-new-cluster 的形式強行拉起一個，而後以添加新成員的方式恢復這個集羣。

這是目前的幾種解決辦法