SQL函數計算流量的95值

我用的是Solarwinds系統,部份內容就結合Solarwinds系統一塊兒寫了。最後落地也是經過系統的Report定時自動出報告而且能夠發郵件。
不過計算方法是經過定義SQL函數,而後使用SQL查詢來獲取到的,這部份內容是通用的。sql

95th 計算方法

從 Solarwinds 官方網站搜索「95th」關鍵字能獲取到說明的文檔。
95th Percentile Calculations in the Orion Platform:
https://documentation.solarwinds.com/en/Success_Center/orionplatform/Content/Core-95th-Percentile-Calculations-sw80.htm數據庫

  1. Over the 10 hours, the following 120 values were collected for inbound traffic (Mb/s):數組

    0.149 0.623 0.281 0.136 0.024 0.042 0.097 0.185 0.198 0.243 0.274 0.390 0.971 0.633 0.238 0.142 
    0.119 0.176 0.131 0.127 0.169 0.223 0.291 0.236 0.124 0.072 0.197 0.105 0.138 0.233 0.374 0.290 
    0.871 0.433 0.248 0.242 0.169 0.116 0.121 0.427 0.249 0.223 0.231 0.336 0.014 0.442 0.197 0.125 
    0.108 0.244 0.264 0.190 0.471 0.033 0.228 0.942 0.219 0.076 0.331 0.227 0.849 0.323 0.221 0.196 
    0.223 0.642 0.197 0.385 0.098 0.263 0.174 0.690 0.571 0.233 0.208 0.242 0.139 0.186 0.331 0.124 
    0.249 0.643 0.481 0.936 0.124 0.742 0.497 0.085 0.398 0.643 0.074 0.590 0.771 0.833 0.438 0.242 
    0.092 0.376 0.231 0.627 0.249 0.663 0.181 0.636 0.224 0.342 0.697 0.285 0.108 0.211 0.074 0.490 
    0.271 0.133 0.338 0.242 0.519 0.376 0.331 0.227
  2. The values are reordered from high to low.ide

    0.971 0.942 0.936 0.871 0.849 0.833 0.771 0.742 0.697 0.690 0.663 0.643 0.643 0.642 0.636 0.633 
    0.627 0.623 0.590 0.571 0.519 0.497 0.490 0.481 0.471 0.442 0.438 0.433 0.427 0.398 0.390 0.385 
    0.376 0.376 0.374 0.342 0.338 0.336 0.331 0.331 0.331 0.323 0.291 0.290 0.285 0.281 0.274 0.271 
    0.264 0.263 0.249 0.249 0.249 0.248 0.244 0.243 0.242 0.242 0.242 0.242 0.238 0.236 0.233 0.233 
    0.231 0.231 0.228 0.227 0.227 0.224 0.223 0.223 0.223 0.221 0.219 0.211 0.208 0.198 0.197 0.197 
    0.197 0.196 0.190 0.186 0.185 0.181 0.176 0.174 0.169 0.169 0.149 0.142 0.139 0.138 0.136 0.133 
    0.131 0.127 0.125 0.124 0.124 0.124 0.121 0.119 0.116 0.108 0.108 0.105 0.098 0.097 0.092 0.085 
    0.076 0.074 0.074 0.072 0.042 0.033 0.024 0.014
  3. The first 6 values are dropped, as these equal the top 5% of the values.函數

    0.771 0.742 0.697 0.690 0.663 0.643 0.643 0.642 0.636 0.633 0.627 0.623 0.590 0.571 0.519 0.497 
    0.490 0.481 0.471 0.442 0.438 0.433 0.427 0.398 0.390 0.385 0.376 0.376 0.374 0.342 0.338 0.336 
    0.331 0.331 0.331 0.323 0.291 0.290 0.285 0.281 0.274 0.271 0.264 0.263 0.249 0.249 0.249 0.248 
    0.244 0.243 0.242 0.242 0.242 0.242 0.238 0.236 0.233 0.233 0.231 0.231 0.228 0.227 0.227 0.224 
    0.223 0.223 0.223 0.221 0.219 0.211 0.208 0.198 0.197 0.197 0.197 0.196 0.190 0.186 0.185 0.181 
    0.176 0.174 0.169 0.169 0.149 0.142 0.139 0.138 0.136 0.133 0.131 0.127 0.125 0.124 0.124 0.124 
    0.121 0.119 0.116 0.108 0.108 0.105 0.098 0.097 0.092 0.085 0.076 0.074 0.074 0.072 0.042 0.033 
    0.024 0.014
  4. The 95th percentile is 0.771.

SQL 函數

系統上安裝的工具是:SQL Server Management Studio工具

新建函數的命令模板

新建內聯表值函數:網站

-- ================================================
-- Template generated from Template Explorer using:
-- Create Inline Function (New Menu).SQL
--
-- Use the Specify Values for Template Parameters 
-- command (Ctrl-Shift-M) to fill in the parameter 
-- values below.
--
-- This block of comments will not be included in
-- the definition of the function.
-- ================================================
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
-- =============================================
-- Author:      <Author,,Name>
-- Create date: <Create Date,,>
-- Description: <Description,,>
-- =============================================
CREATE FUNCTION <Inline_Function_Name, sysname, FunctionName> 
(   
    -- Add the parameters for the function here
    <@param1, sysname, @p1> <Data_Type_For_Param1, , int>, 
    <@param2, sysname, @p2> <Data_Type_For_Param2, , char>
)
RETURNS TABLE 
AS
RETURN 
(
    -- Add the SELECT statement with parameter references here
    SELECT 0
)
GO

新建多語句表值函數:code

-- ================================================
-- Template generated from Template Explorer using:
-- Create Multi-Statement Function (New Menu).SQL
--
-- Use the Specify Values for Template Parameters 
-- command (Ctrl-Shift-M) to fill in the parameter 
-- values below.
--
-- This block of comments will not be included in
-- the definition of the function.
-- ================================================
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
-- =============================================
-- Author:      <Author,,Name>
-- Create date: <Create Date,,>
-- Description: <Description,,>
-- =============================================
CREATE FUNCTION <Table_Function_Name, sysname, FunctionName> 
(
    -- Add the parameters for the function here
    <@param1, sysname, @p1> <data_type_for_param1, , int>, 
    <@param2, sysname, @p2> <data_type_for_param2, , char>
)
RETURNS 
<@Table_Variable_Name, sysname, @Table_Var> TABLE 
(
    -- Add the column definitions for the TABLE variable here
    <Column_1, sysname, c1> <Data_Type_For_Column1, , int>, 
    <Column_2, sysname, c2> <Data_Type_For_Column2, , int>
)
AS
BEGIN
    -- Fill the table variable with the rows for your result set

    RETURN 
END
GO

新建標量值函數:orm

-- ================================================
-- Template generated from Template Explorer using:
-- Create Scalar Function (New Menu).SQL
--
-- Use the Specify Values for Template Parameters 
-- command (Ctrl-Shift-M) to fill in the parameter 
-- values below.
--
-- This block of comments will not be included in
-- the definition of the function.
-- ================================================
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
-- =============================================
-- Author:      <Author,,Name>
-- Create date: <Create Date, ,>
-- Description: <Description, ,>
-- =============================================
CREATE FUNCTION <Scalar_Function_Name, sysname, FunctionName> 
(
    -- Add the parameters for the function here
    <@Param1, sysname, @p1> <Data_Type_For_Param1, , int>
)
RETURNS <Function_Data_Type, ,int>
AS
BEGIN
    -- Declare the return variable here
    DECLARE <@ResultVar, sysname, @Result> <Function_Data_Type, ,int>

    -- Add the T-SQL statements to compute the return value here
    SELECT <@ResultVar, sysname, @Result> = <@Param1, sysname, @p1>

    -- Return the result of the function
    RETURN <@ResultVar, sysname, @Result>

END
GO

Solarwinds系統使用的計算95th的函數

經過標量值函數來實現的。
一共有3個,一個In方向GetInBps95th,一個Out方向GetOutBps95th。
還有一個單個時間點的In和Out方向取大值計算結果。
函數已經在系統中了,這裏是修改函數的命令模板。 htm

計算In方向的95th

USE [SolarwindsOrion]
GO
/****** Object:  UserDefinedFunction [dbo].[GetInBps95th]    Script Date: 2019/11/14 11:07:12 ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO

ALTER FUNCTION [dbo].[GetInBps95th] 
(
    @InterfaceId int,
    @StartDate DateTime,
    @EndDate DateTime
)
RETURNS real
AS
BEGIN
    DECLARE @ResultVar real

    SELECT @ResultVar = MAX(In_Maxbps)
    FROM (
        SELECT TOP 95 PERCENT In_Maxbps
        FROM dbo.InterfaceTraffic WITH (NOLOCK)
        WHERE InterfaceID = @InterfaceId AND DateTime >= @StartDate AND DateTime <= @EndDate
        ORDER BY In_Maxbps ASC
    ) AS AA

    RETURN @ResultVar

END

Out方向的只是換一個字段,其餘都同樣。

計算雙向的95th

USE [SolarwindsOrion]
GO
/****** Object:  UserDefinedFunction [dbo].[GetMaxBps95th]    Script Date: 2019/11/14 11:08:42 ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO

ALTER FUNCTION [dbo].[GetMaxBps95th] 
(
    @InterfaceId int,
    @StartDate DateTime,
    @EndDate DateTime
)
RETURNS real
AS
BEGIN
    DECLARE @ResultVar real

    SELECT @ResultVar = MAX(Maxbps)
    FROM (
        SELECT TOP 95 PERCENT Maxbps
        FROM (SELECT (CASE WHEN Out_Maxbps > In_Maxbps THEN Out_Maxbps ELSE In_Maxbps END) AS Maxbps
            FROM dbo.InterfaceTraffic WITH (NOLOCK)
            WHERE InterfaceID = @InterfaceId AND DateTime >= @StartDate AND DateTime <= @EndDate) AS MaxbpsSet
        ORDER BY Maxbps ASC
    ) AS AA

    RETURN @ResultVar

END

多了一層子查詢,使用WHEN子句用來判斷取大的值。

自定義函數

由於原有的函數不能知足需求,須要改一下,增長一個時間段篩選的變量。需求就是一週或者一個月,天天只取工做時間的數據。
這裏按時間的小時數 'DATEPART(hh,DateTime)' 只要是9到16這些數值就表示天天的9點到17點了。
另外還有一個時間段的需求是天天有2段時間,考慮到通用性,這裏用了數組的方式來設置,把須要的小時的數值定義在數組裏。實際沒有用數組,用字符串來模擬了。

建立自定義函數

建立一個自定義函數,在原有的函數的基礎上,增長時間段的篩選:

USE [SolarwindsOrion]
GO
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
-- =============================================
-- Author:      Steed Xu
-- Create date: 2019/11/14
-- Description: Base on GetInBps95th, add BusyHours.
-- =============================================
CREATE FUNCTION [dbo].[GetInBps95thBusyHours] 
(
    @InterfaceId int,
    @StartDate DateTime,
    @EndDate DateTime,
    @BusyHours VarChar(64)
)
RETURNS real
AS
BEGIN
    DECLARE @ResultVar real

    SELECT @ResultVar = MAX(In_Maxbps)
    FROM (
        SELECT TOP 95 PERCENT In_Maxbps
        FROM dbo.InterfaceTraffic WITH (NOLOCK)
        WHERE InterfaceID = @InterfaceId 
            AND DateTime >= @StartDate AND DateTime <= @EndDate
            AND ','+RTRIM(@BusyHours)+',' LIKE '%,'+CAST(DATEPART(hh,DateTime) AS varchar)+',%'
        ORDER BY In_Maxbps ASC
    ) AS AA

    RETURN @ResultVar

END
GO

執行上面的語句後,就會添加到數據庫中。
注意:這裏定義字符串變量的時候要指定大小,不然雖然能夠成功執行,可是結果會和預期的不同。

解決數組的問題

篩選方式使用取時間的小時數,一天裏哪幾個時段是須要的,就定義在數組裏。
使用的時候這樣定義:

DECLARE @BusyHours VarChar(64)
SET @BusyHours = '9,10,11,12,13,14,15,16'

這樣就是要取9點到17點的數據。

對應的WHERE能夠這樣寫:

WHERE ','+RTrim(@BusyHours)+',' LIKE '%,'+CAST(datepart(hh,DateTime) AS VarChar)+',%'

基本用字符串模擬出了數組的效果,在這裏是夠用了。

修改自定義函數

若是建立的時候寫錯了,則能夠用下面的模板進行修改,更新到數據庫中。

USE [SolarwindsOrion]
GO
/****** Object:  UserDefinedFunction [dbo].[GetInBps95thBusyHours]    Script Date: 2019/11/14 13:43:21 ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
-- =============================================
-- Author:      Steed Xu
-- Create date: 2019/11/14
-- Description: Base on GetInBps95th, add BusyHours.
-- =============================================
ALTER FUNCTION [dbo].[GetInBps95thBusyHours]
(
    @InterfaceId int,
    @StartDate DateTime,
    @EndDate DateTime,
    @BusyHours VarChar(64)
)
RETURNS real
AS
BEGIN
    DECLARE @ResultVar real

    SELECT @ResultVar = MAX(In_Maxbps)
    FROM (
        SELECT TOP 95 PERCENT In_Maxbps
        FROM dbo.InterfaceTraffic WITH (NOLOCK)
        WHERE InterfaceID = @InterfaceId 
            AND DateTime >= @StartDate AND DateTime <= @EndDate 
            AND ','+RTRIM(@BusyHours)+',' LIKE '%,'+CAST(DATEPART(hh,DateTime) AS varchar)+',%'
        ORDER BY In_Maxbps ASC
    ) AS AA

    RETURN @ResultVar

END

在SQL中調用函數

供應商給的使用模板

完整的SQL查詢語句:

完整的查詢語句以下:
SET NOCOUNT OFF
SET ROWCOUNT 0

DECLARE @StartDate DateTime
DECLARE @EndDate DateTime

SET @StartDate = CAST((ROUND(CAST(GetDate() - 7 AS FLOAT), 0, 1)) as datetime)
SET @EndDate = GetDate()

SELECT Interfaces.InterfaceId,
    Nodes.NodeID,
    Nodes.Caption AS NodeName,
    Nodes.VendorIcon AS Vendor_Icon,
    Interfaces.Caption AS Interface_Caption,
    Interfaces.InterfaceIcon AS Interface_Icon,
    Maxbps_In95,
    Maxbps_Out95,
    Maxbps_95
FROM Nodes
INNER JOIN Interfaces ON Nodes.NodeID = Interfaces.NodeID
INNER JOIN (
    SELECT InterfaceID,
        dbo.GetInBps95th(InterfaceID, @StartDate, @EndDate) AS Maxbps_In95,
        dbo.GetOutBps95th(InterfaceID, @StartDate, @EndDate) AS Maxbps_Out95,
        dbo.GetMaxBps95th(InterfaceID, @StartDate, @EndDate) AS Maxbps_95
    FROM InterfaceTraffic
    WHERE InterfaceTraffic.DateTime >= @StartDate AND InterfaceTraffic.DateTime <= @EndDate
    GROUP BY InterfaceID
) TrafficStat
ON Interfaces.InterfaceID = TrafficStat.InterfaceID
WHERE (1=1)
AND  
(
    (Nodes.Vendor = 'Cisco') AND
    (Interfaces.Comments = 'MT')
)
ORDER BY 
Maxbps_In95 desc,
Maxbps_Out95 desc

按需求修改的查詢語句

需求是要計算一週的數據,這裏是獲取上一週的數據,從週一開始。
完整的查詢語句:

SET NOCOUNT OFF
SET ROWCOUNT 0

DECLARE @StartDate DateTime
DECLARE @EndDate DateTime
DECLARE @BusyHours VarChar(64)

SET @StartDate = DATEADD(week,-1,DATEADD(week,DATEDIFF(week,0,getdate()),0))
SET @EndDate = DATEADD(week,DATEDIFF(week,0,getdate()),0)
SET @BusyHours = '9,10,11,12,13,14,15,16'

SELECT Interfaces.InterfaceId,
    Nodes.NodeID,
    Nodes.Caption AS NodeName,
    Nodes.VendorIcon AS Vendor_Icon,
    Nodes.IP_Address,
    Interfaces.InterfaceName AS Interface_Name,
    Interfaces.InterfaceAlias AS Description,
    Interfaces.InterfaceIcon AS Interface_Icon,
    Maxbps_In95,
    Maxbps_Out95,
    @StartDate AS StartDate,
    @EndDate AS EndDate,
    @BusyHours AS BusyHours,
    Interfaces.Status AS Interfaces_Status
FROM Nodes
INNER JOIN Interfaces ON Nodes.NodeID = Interfaces.NodeID
INNER JOIN (
    SELECT InterfaceID,
        dbo.GetInBps95thBusyHours(InterfaceID, @StartDate, @EndDate, @BusyHours) AS Maxbps_In95,
        dbo.GetOutBps95thBusyHours(InterfaceID, @StartDate, @EndDate, @BusyHours) AS Maxbps_Out95
    FROM InterfaceTraffic
    WHERE InterfaceTraffic.DateTime >= @StartDate
        AND InterfaceTraffic.DateTime <= @EndDate
        AND ','+RTRIM(@BusyHours)+',' LIKE '%,'+CAST(DATEPART(hh,DateTime) AS varchar)+',%'
    GROUP BY InterfaceID
) TrafficStat
ON Interfaces.InterfaceId = TrafficStat.InterfaceId
WHERE (1=1)
    AND Nodes.IP_Address IN ('172.16.6.1','172.16.6.2','172.16.5.3','172.16.10.1','172.16.10.2','172.16.5.4')
    AND Interfaces.InterfaceAlias <> ''
    AND Interfaces.Status IN (1,2)
ORDER BY Interfaces.InterfaceId

注意:這裏定義字符串變量的時候要指定大小,不然雖然能夠成功執行,可是結果會和預期的不同。

驗證計算結果

在寫一個查詢語句,把一個端口下的全部的流量數據都導出。驗證函數的結果是否符合預期。
完整的查詢語句:

SET NOCOUNT OFF
SET ROWCOUNT 0

DECLARE @StartDate DateTime
DECLARE @EndDate DateTime
DECLARE @BusyHours VarChar(64)
DECLARE @InterfaceId int

SET @StartDate = DATEADD(week,-1,DATEADD(week,DATEDIFF(week,0,getdate()),0))
SET @EndDate = DATEADD(week,DATEDIFF(week,0,getdate()),0)
SET @BusyHours = '9,10,11,12,13,14,15,16'
SET @InterfaceId = 28993

SELECT TOP 95 PERCENT 
    DateTime, InterfaceID, In_Maxbps, Out_Maxbps, 
    @StartDate AS StartDate,
    @EndDate AS EndDate,
    @BusyHours AS BusyHours
FROM InterfaceTraffic
WHERE InterfaceTraffic.DateTime >= @StartDate
    AND InterfaceTraffic.DateTime <= @EndDate
    AND ','+RTrim(@BusyHours)+',' LIKE '%,'+CAST(datepart(hh,DateTime) AS VarChar)+',%'
    AND InterfaceID = @InterfaceId
ORDER BY In_Maxbps ASC
相關文章
相關標籤/搜索