Android ListView原理之layout 源碼解析
在Android全部經常使用的原生控件當中，用法最複雜的應該就是ListView了， ListView 父控件AbsListView 同時也會引申出GridView， 父控件也是AbsListViewandroid
參考此篇文章：blog.csdn.net/guolin_blog…數組
RecycleBin機制緩存
那麼在開始分析ListView的源碼以前，還有一個東西是咱們提早須要瞭解的，就是RecycleBin機制，它是在AbsListView中的一個內部類，因此全部繼承自AbsListView的子類，也就是ListView和GridView，均可以使用這個機制。那咱們來看一下RecycleBin中的主要代碼，以下所示：bash
class RecycleBin {
private RecyclerListener mRecyclerListener;
/**
* The position of the first view stored in mActiveViews.
*/
private int mFirstActivePosition;
/**
* Views that were on screen at the start of layout. This array is populated at the start of
* layout, and at the end of layout all view in mActiveViews are moved to mScrapViews.
* Views in mActiveViews represent a contiguous range of Views, with position of the first
* view store in mFirstActivePosition.
*/
//佈局開始時屏幕顯示的view，這個數組會在佈局開始時填充，佈局結束後全部view被移至mScrapViews。（也包括是當前屏幕所展現的活躍view）
private View[] mActiveViews = new View[0];
/**
* Unsorted views that can be used by the adapter as a convert view.
*/
//ListView中全部的廢棄緩存。這是一個數組，每一種佈局類型的view都有一個本身的arraylist緩存
private ArrayList<View>[] mScrapViews;
//listView中不一樣item佈局的佈局總數
private int mViewTypeCount;
//跟mScrapViews的區別是，mScrapViews是個隊列數組，ArrayList<View>[]類型，數組長度爲mViewTypeCount，而默認ViewTypeCount = 1的狀況下mCurrentScrap=mScrapViews[0]。
private ArrayList<View> mCurrentScrap;
// 被跳過的，不能複用的view集合。view type小於0或者處理transient狀態的view不能被複用
private ArrayList<View> mSkippedScrap;
//處於transient狀態的view集合，處於transient狀態的view不能被複用，如view的動畫正在播放，
// transient是瞬時、短暫的意思
private SparseArray<View> mTransientStateViews;
//若是adapter的hasStableIds方法返回true，處於過分狀態的view保存到這裏。
//由於須要保存view的position，並且處於過分狀態的view通常不多，
//知道是保存轉換狀態view的集合就行，itemId做爲key（其實就是view的position）
private LongSparseArray<view> mTransientStateViewsById
public void setViewTypeCount(int viewTypeCount) {
........
}
public void markChildrenDirty() {
if (mViewTypeCount == 1) {
.......
} else {
......
}
if (mTransientStateViews != null) {
......
}
if (mTransientStateViewsById != null) {
.....
}
}
public boolean shouldRecycleViewType(int viewType) {
return viewType >= 0;
}
/**
* Clears the scrap heap.
*/
void clear() {
if (mViewTypeCount == 1) {
final ArrayList<View> scrap = mCurrentScrap;
clearScrap(scrap);
} else {
final int typeCount = mViewTypeCount;
for (int i = 0; i < typeCount; i++) {
final ArrayList<View> scrap = mScrapViews[i];
clearScrap(scrap);
}
}
clearTransientStateViews();
}
/**
* Fill ActiveViews with all of the children of the AbsListView.
*
* @param childCount The minimum number of views mActiveViews should hold
* @param firstActivePosition The position of the first view that will be stored in
* mActiveViews
*/
void fillActiveViews(int childCount, int firstActivePosition) {
if (mActiveViews.length < childCount) {
mActiveViews = new View[childCount];
}
mFirstActivePosition = firstActivePosition;
//noinspection MismatchedReadAndWriteOfArray
final View[] activeViews = mActiveViews;
for (int i = 0; i < childCount; i++) {
View child = getChildAt(i);
AbsListView.LayoutParams lp = (AbsListView.LayoutParams) child.getLayoutParams();
// Don't put header or footer views into the scrap heap if (lp != null && lp.viewType != ITEM_VIEW_TYPE_HEADER_OR_FOOTER) { // Note: We do place AdapterView.ITEM_VIEW_TYPE_IGNORE in active views. // However, we will NOT place them into scrap views. activeViews[i] = child; // Remember the position so that setupChild() doesn't reset state.
lp.scrappedFromPosition = firstActivePosition + i;
}
}
}
/**
* Get the view corresponding to the specified position. The view will be removed from
* mActiveViews if it is found.
*
* @param position The position to look up in mActiveViews
* @return The view if it is found, null otherwise
*/
View getActiveView(int position) {
int index = position - mFirstActivePosition;
final View[] activeViews = mActiveViews;
if (index >=0 && index < activeViews.length) {
final View match = activeViews[index];
activeViews[index] = null;
return match;
}
return null;
}
View getTransientStateView(int position) {
if (mAdapter != null && mAdapterHasStableIds && mTransientStateViewsById != null) {
long id = mAdapter.getItemId(position);
View result = mTransientStateViewsById.get(id);
mTransientStateViewsById.remove(id);
return result;
}
if (mTransientStateViews != null) {
final int index = mTransientStateViews.indexOfKey(position);
if (index >= 0) {
View result = mTransientStateViews.valueAt(index);
mTransientStateViews.removeAt(index);
return result;
}
}
return null;
}
/**
* Dumps and fully detaches any currently saved views with transient
* state.
*/
void clearTransientStateViews() {
final SparseArray<View> viewsByPos = mTransientStateViews;
if (viewsByPos != null) {
final int N = viewsByPos.size();
for (int i = 0; i < N; i++) {
removeDetachedView(viewsByPos.valueAt(i), false);
}
viewsByPos.clear();
}
final LongSparseArray<View> viewsById = mTransientStateViewsById;
if (viewsById != null) {
final int N = viewsById.size();
for (int i = 0; i < N; i++) {
removeDetachedView(viewsById.valueAt(i), false);
}
viewsById.clear();
}
}
/**
* @return A view from the ScrapViews collection. These are unordered.
*/
View getScrapView(int position) {
final int whichScrap = mAdapter.getItemViewType(position);
if (whichScrap < 0) {
return null;
}
if (mViewTypeCount == 1) {
return retrieveFromScrap(mCurrentScrap, position);
} else if (whichScrap < mScrapViews.length) {
return retrieveFromScrap(mScrapViews[whichScrap], position);
}
return null;
}
/**
* Puts a view into the list of scrap views.
* <p>
* If the list data hasn't changed or the adapter has stable IDs, views * with transient state will be preserved for later retrieval. * * @param scrap The view to add * @param position The view's position within its parent
*/
void addScrapView(View scrap, int position) {
final AbsListView.LayoutParams lp = (AbsListView.LayoutParams) scrap.getLayoutParams();
if (lp == null) {
// Can't recycle, but we don't know anything about the view.
// Ignore it completely.
return;
}
lp.scrappedFromPosition = position;
// Remove but don't scrap header or footer views, or views that // should otherwise not be recycled. final int viewType = lp.viewType; if (!shouldRecycleViewType(viewType)) { // Can't recycle. If it's not a header or footer, which have // special handling and should be ignored, then skip the scrap // heap and we'll fully detach the view later.
if (viewType != ITEM_VIEW_TYPE_HEADER_OR_FOOTER) {
getSkippedScrap().add(scrap);
}
return;
}
scrap.dispatchStartTemporaryDetach();
// The the accessibility state of the view may change while temporary
// detached and we do not allow detached views to fire accessibility
// events. So we are announcing that the subtree changed giving a chance
// to clients holding on to a view in this subtree to refresh it.
notifyViewAccessibilityStateChangedIfNeeded(
AccessibilityEvent.CONTENT_CHANGE_TYPE_SUBTREE);
// Don't scrap views that have transient state. final boolean scrapHasTransientState = scrap.hasTransientState(); if (scrapHasTransientState) { if (mAdapter != null && mAdapterHasStableIds) { // If the adapter has stable IDs, we can reuse the view for // the same data. if (mTransientStateViewsById == null) { mTransientStateViewsById = new LongSparseArray<>(); } mTransientStateViewsById.put(lp.itemId, scrap); } else if (!mDataChanged) { // If the data hasn't changed, we can reuse the views at
// their old positions.
if (mTransientStateViews == null) {
mTransientStateViews = new SparseArray<>();
}
mTransientStateViews.put(position, scrap);
} else {
// Otherwise, we'll have to remove the view and start over. clearScrapForRebind(scrap); getSkippedScrap().add(scrap); } } else { clearScrapForRebind(scrap); if (mViewTypeCount == 1) { mCurrentScrap.add(scrap); } else { mScrapViews[viewType].add(scrap); } if (mRecyclerListener != null) { mRecyclerListener.onMovedToScrapHeap(scrap); } } } private ArrayList<View> getSkippedScrap() { if (mSkippedScrap == null) { mSkippedScrap = new ArrayList<>(); } return mSkippedScrap; } /** * Finish the removal of any views that skipped the scrap heap. */ void removeSkippedScrap() { ....... } /** * Move all views remaining in mActiveViews to mScrapViews. */ void scrapActiveViews() { final View[] activeViews = mActiveViews; final boolean hasListener = mRecyclerListener != null; final boolean multipleScraps = mViewTypeCount > 1; ArrayList<View> scrapViews = mCurrentScrap; final int count = activeViews.length; for (int i = count - 1; i >= 0; i--) { final View victim = activeViews[i]; if (victim != null) { final AbsListView.LayoutParams lp = (AbsListView.LayoutParams) victim.getLayoutParams(); final int whichScrap = lp.viewType; activeViews[i] = null; if (victim.hasTransientState()) { // Store views with transient state for later use. victim.dispatchStartTemporaryDetach(); if (mAdapter != null && mAdapterHasStableIds) { if (mTransientStateViewsById == null) { mTransientStateViewsById = new LongSparseArray<View>(); } long id = mAdapter.getItemId(mFirstActivePosition + i); mTransientStateViewsById.put(id, victim); } else if (!mDataChanged) { if (mTransientStateViews == null) { mTransientStateViews = new SparseArray<View>(); } mTransientStateViews.put(mFirstActivePosition + i, victim); } else if (whichScrap != ITEM_VIEW_TYPE_HEADER_OR_FOOTER) { // The data has changed, we can't keep this view.
removeDetachedView(victim, false);
}
} else if (!shouldRecycleViewType(whichScrap)) {
// Discard non-recyclable views except headers/footers.
if (whichScrap != ITEM_VIEW_TYPE_HEADER_OR_FOOTER) {
removeDetachedView(victim, false);
}
} else {
// Store everything else on the appropriate scrap heap.
if (multipleScraps) {
scrapViews = mScrapViews[whichScrap];
}
lp.scrappedFromPosition = mFirstActivePosition + i;
removeDetachedView(victim, false);
scrapViews.add(victim);
if (hasListener) {
mRecyclerListener.onMovedToScrapHeap(victim);
}
}
}
}
pruneScrapViews();
}
/**
* At the end of a layout pass, all temp detached views should either be re-attached or
* completely detached. This method ensures that any remaining view in the scrap list is
* fully detached.
*/
void fullyDetachScrapViews() {
final int viewTypeCount = mViewTypeCount;
final ArrayList<View>[] scrapViews = mScrapViews;
for (int i = 0; i < viewTypeCount; ++i) {
final ArrayList<View> scrapPile = scrapViews[i];
for (int j = scrapPile.size() - 1; j >= 0; j--) {
final View view = scrapPile.get(j);
if (view.isTemporarilyDetached()) {
removeDetachedView(view, false);
}
}
}
}
/**
* Makes sure that the size of mScrapViews does not exceed the size of
* mActiveViews, which can happen if an adapter does not recycle its
* views. Removes cached transient state views that no longer have
* transient state.
*/
private void pruneScrapViews() {
.......
}
/**
* Updates the cache color hint of all known views.
*
* @param color The new cache color hint.
*/
void setCacheColorHint(int color) {
if (mViewTypeCount == 1) {
final ArrayList<View> scrap = mCurrentScrap;
final int scrapCount = scrap.size();
for (int i = 0; i < scrapCount; i++) {
scrap.get(i).setDrawingCacheBackgroundColor(color);
}
} else {
final int typeCount = mViewTypeCount;
for (int i = 0; i < typeCount; i++) {
final ArrayList<View> scrap = mScrapViews[i];
final int scrapCount = scrap.size();
for (int j = 0; j < scrapCount; j++) {
scrap.get(j).setDrawingCacheBackgroundColor(color);
}
}
}
// Just in case this is called during a layout pass
final View[] activeViews = mActiveViews;
final int count = activeViews.length;
for (int i = 0; i < count; ++i) {
final View victim = activeViews[i];
if (victim != null) {
victim.setDrawingCacheBackgroundColor(color);
}
}
}
private View retrieveFromScrap(ArrayList<View> scrapViews, int position) {
final int size = scrapViews.size();
if (size > 0) {
// See if we still have a view for this position or ID.
// Traverse backwards to find the most recently used scrap view
for (int i = size - 1; i >= 0; i--) {
final View view = scrapViews.get(i);
final AbsListView.LayoutParams params =
(AbsListView.LayoutParams) view.getLayoutParams();
if (mAdapterHasStableIds) {
final long id = mAdapter.getItemId(position);
if (id == params.itemId) {
return scrapViews.remove(i);
}
} else if (params.scrappedFromPosition == position) {
final View scrap = scrapViews.remove(i);
clearScrapForRebind(scrap);
return scrap;
}
}
final View scrap = scrapViews.remove(size - 1);
clearScrapForRebind(scrap);
return scrap;
} else {
return null;
}
}
private void clearScrap(final ArrayList<View> scrap) {
final int scrapCount = scrap.size();
for (int j = 0; j < scrapCount; j++) {
removeDetachedView(scrap.remove(scrapCount - 1 - j), false);
}
}
private void clearScrapForRebind(View view) {
view.clearAccessibilityFocus();
view.setAccessibilityDelegate(null);
}
private void removeDetachedView(View child, boolean animate) {
child.setAccessibilityDelegate(null);
AbsListView.this.removeDetachedView(child, animate);
}
}
複製代碼
關於變量的解釋都在代碼註釋中，下一篇文章會着重講解緩存！app
這面會着重說明layout（）方法！
由於layout（）方法會走兩次！爲何layout（）方法會執行兩次呢？ 我猜想應該是頂層的 performTranversal函數在View的測量流程中會執行2次（View的繪製流程都始於ViewRootImpl的performTraversals方法）。async
##第一次Layout（）方法 代碼比較多，咱們挑重點解析： 首先能夠肯定的是，ListView當中目前尚未任何子View，數據都仍是由Adapter管理的，並無展現到界面上，ide
boolean dataChanged = mDataChanged;
if (dataChanged) {
handleDataChanged();
}
複製代碼
這面說明下mDataChanged，mDataChanged是AdapterView中的變量，由於listView自己的適配器Adapter是用到觀察者模式的，調用函數
public void notifyDataSetChanged() {
mDataSetObservable.notifyChanged();
}
public void notifyChanged() {
synchronized(mObservers) {
// since onChanged() is implemented by the app, it could do anything, including
// removing itself from {@link mObservers} - and that could cause problems if
// an iterator is used on the ArrayList {@link mObservers}.
// to avoid such problems, just march thru the list in the reverse order.
for (int i = mObservers.size() - 1; i >= 0; i--) {
mObservers.get(i).onChanged();
}
}
}
@Override
public void onChanged() {
mDataChanged = true;
}
複製代碼
這樣數據量發生改變的時候mDataChanged就會變成true，固然默認值是false！ 而後會走到下面的switch case 由於第一次確定是默認，會走 switch中的default: 也就是1781行，childCount確定會爲0，而後會走到 fillFromTop(childrenTop)這個方法！佈局
private View fillFromTop(int nextTop) {
mFirstPosition = Math.min(mFirstPosition, mSelectedPosition);
mFirstPosition = Math.min(mFirstPosition, mItemCount - 1);
if (mFirstPosition < 0) {
mFirstPosition = 0;
}
return fillDown(mFirstPosition, nextTop);
}
複製代碼
從這個方法的註釋中能夠看出，它所負責的主要任務就是從mFirstPosition開始，自頂至底去填充ListView。而這個方法自己並無什麼邏輯，就是判斷了一下mFirstPosition值的合法性，而後調用fillDown()方法，那麼咱們就有理由能夠猜想，填充ListView的操做是在fillDown()方法中完成的。進入fillDown()方法，代碼以下所示：post
private View fillDown(int pos, int nextTop) {
View selectedView = null;
int end = (mBottom - mTop);
if ((mGroupFlags & CLIP_TO_PADDING_MASK) == CLIP_TO_PADDING_MASK) {
end -= mListPadding.bottom;
}
while (nextTop < end && pos < mItemCount) {
// is this the selected item?
boolean selected = pos == mSelectedPosition;
View child = makeAndAddView(pos, nextTop, true, mListPadding.left, selected);
nextTop = child.getBottom() + mDividerHeight;
if (selected) {
selectedView = child;
}
pos++;
}
setVisibleRangeHint(mFirstPosition, mFirstPosition + getChildCount() - 1);
return selectedView;
}
複製代碼
能夠看到，這裏使用了一個while循環來執行重複邏輯，一開始nextTop的值是第一個子元素頂部距離整個ListView頂部的像素值，pos則是剛剛傳入的mFirstPosition的值，而end是ListView底部減去頂部所得的像素值，mItemCount則是Adapter中的元素數量。所以一開始的狀況下nextTop一定是小於end值的，而且pos也是小於mItemCount值的。那麼每執行一次while循環，pos的值都會加1，而且nextTop也會增長，當nextTop大於等於end時，也就是子元素已經超出當前屏幕了，或者pos大於等於mItemCount時，也就是全部Adapter中的元素都被遍歷結束了，就會跳出while循環。
那麼while循環當中又作了什麼事情呢？值得讓人留意的就是第18行調用的makeAndAddView()方法，進入到這個方法當中，代碼以下所示：
private View makeAndAddView(int position, int y, boolean flow, int childrenLeft,
boolean selected) {
if (!mDataChanged) {
// Try to use an existing view for this position.
final View activeView = mRecycler.getActiveView(position);
if (activeView != null) {
// Found it. We're reusing an existing child, so it just needs // to be positioned like a scrap view. setupChild(activeView, position, y, flow, childrenLeft, selected, true); return activeView; } } // Make a new view for this position, or convert an unused view if // possible. final View child = obtainView(position, mIsScrap); // This needs to be positioned and measured. setupChild(child, position, y, flow, childrenLeft, selected, mIsScrap[0]); return child; } 複製代碼
這裏在第5行嘗試從RecycleBin當中快速獲取一個active view，不過很遺憾的是目前RecycleBin當中尚未緩存任何的View，因此這裏獲得的值確定是null。那麼取得了null以後就會繼續向下運行，到第16行會調用obtainView()方法來再次嘗試獲取一個View，此次的obtainView()方法是能夠保證必定返回一個View的，因而下面馬上將獲取到的View傳入到了setupChild()方法當中。那麼obtainView()內部究竟是怎麼工做的呢？咱們先進入到這個方法裏面看一下：
View obtainView(int position, boolean[] outMetadata) {
Trace.traceBegin(Trace.TRACE_TAG_VIEW, "obtainView");
outMetadata[0] = false;
// Check whether we have a transient state view. Attempt to re-bind the
// data and discard the view if we fail.
final View transientView = mRecycler.getTransientStateView(position);
if (transientView != null) {
final LayoutParams params = (LayoutParams) transientView.getLayoutParams();
// If the view type hasn't changed, attempt to re-bind the data. if (params.viewType == mAdapter.getItemViewType(position)) { final View updatedView = mAdapter.getView(position, transientView, this); // If we failed to re-bind the data, scrap the obtained view. if (updatedView != transientView) { setItemViewLayoutParams(updatedView, position); mRecycler.addScrapView(updatedView, position); } } outMetadata[0] = true; // Finish the temporary detach started in addScrapView(). transientView.dispatchFinishTemporaryDetach(); return transientView; } final View scrapView = mRecycler.getScrapView(position); final View child = mAdapter.getView(position, scrapView, this); if (scrapView != null) { if (child != scrapView) { // Failed to re-bind the data, return scrap to the heap. mRecycler.addScrapView(scrapView, position); } else if (child.isTemporarilyDetached()) { outMetadata[0] = true; // Finish the temporary detach started in addScrapView(). child.dispatchFinishTemporaryDetach(); } } if (mCacheColorHint != 0) { child.setDrawingCacheBackgroundColor(mCacheColorHint); } if (child.getImportantForAccessibility() == IMPORTANT_FOR_ACCESSIBILITY_AUTO) { child.setImportantForAccessibility(IMPORTANT_FOR_ACCESSIBILITY_YES); } setItemViewLayoutParams(child, position); if (AccessibilityManager.getInstance(mContext).isEnabled()) { if (mAccessibilityDelegate == null) { mAccessibilityDelegate = new ListItemAccessibilityDelegate(); } if (child.getAccessibilityDelegate() == null) { child.setAccessibilityDelegate(mAccessibilityDelegate); } } Trace.traceEnd(Trace.TRACE_TAG_VIEW); return child; } 複製代碼
final View transientView = mRecycler.getTransientStateView(position);
複製代碼
第一次 transientView 確定會爲null 這樣接下來會日後走，
final View scrapView = mRecycler.getScrapView(position);
final View child = mAdapter.getView(position, scrapView, this);
複製代碼
可想而知 第一次layout的scrapView也確定會爲null，接下會從mAdapter.getView(position, scrapView, this)，適配器中拿到利用佈局加載器生成的view（這面就不對適配器的getView（）方法作說明了！） 而後就會拿到view了 接下來：
private void setItemViewLayoutParams(View child, int position) {
final ViewGroup.LayoutParams vlp = child.getLayoutParams();
LayoutParams lp;
if (vlp == null) {
lp = (LayoutParams) generateDefaultLayoutParams();
} else if (!checkLayoutParams(vlp)) {
lp = (LayoutParams) generateLayoutParams(vlp);
} else {
lp = (LayoutParams) vlp;
}
if (mAdapterHasStableIds) {
lp.itemId = mAdapter.getItemId(position);
}
lp.viewType = mAdapter.getItemViewType(position);
lp.isEnabled = mAdapter.isEnabled(position);
if (lp != vlp) {
child.setLayoutParams(lp);
}
}
複製代碼
處理view的LayoutParams，、 在回到makeAndAddView（）這一方法！拿到view會 setupChild(child, position, y, flow, childrenLeft, selected, mIsScrap[0]);
private void setupChild(View child, int position, int y, boolean flowDown, int childrenLeft,
boolean selected, boolean isAttachedToWindow) {
Trace.traceBegin(Trace.TRACE_TAG_VIEW, "setupListItem");
final boolean isSelected = selected && shouldShowSelector();
final boolean updateChildSelected = isSelected != child.isSelected();
final int mode = mTouchMode;
final boolean isPressed = mode > TOUCH_MODE_DOWN && mode < TOUCH_MODE_SCROLL
&& mMotionPosition == position;
final boolean updateChildPressed = isPressed != child.isPressed();
final boolean needToMeasure = !isAttachedToWindow || updateChildSelected
|| child.isLayoutRequested();
// Respect layout params that are already in the view. Otherwise make
// some up...
AbsListView.LayoutParams p = (AbsListView.LayoutParams) child.getLayoutParams();
if (p == null) {
p = (AbsListView.LayoutParams) generateDefaultLayoutParams();
}
p.viewType = mAdapter.getItemViewType(position);
p.isEnabled = mAdapter.isEnabled(position);
// Set up view state before attaching the view, since we may need to
// rely on the jumpDrawablesToCurrentState() call that occurs as part
// of view attachment.
if (updateChildSelected) {
child.setSelected(isSelected);
}
if (updateChildPressed) {
child.setPressed(isPressed);
}
if (mChoiceMode != CHOICE_MODE_NONE && mCheckStates != null) {
if (child instanceof Checkable) {
((Checkable) child).setChecked(mCheckStates.get(position));
} else if (getContext().getApplicationInfo().targetSdkVersion
>= android.os.Build.VERSION_CODES.HONEYCOMB) {
child.setActivated(mCheckStates.get(position));
}
}
if ((isAttachedToWindow && !p.forceAdd) || (p.recycledHeaderFooter
&& p.viewType == AdapterView.ITEM_VIEW_TYPE_HEADER_OR_FOOTER)) {
attachViewToParent(child, flowDown ? -1 : 0, p);
// If the view was previously attached for a different position,
// then manually jump the drawables.
if (isAttachedToWindow
&& (((AbsListView.LayoutParams) child.getLayoutParams()).scrappedFromPosition)
!= position) {
child.jumpDrawablesToCurrentState();
}
} else {
p.forceAdd = false;
if (p.viewType == AdapterView.ITEM_VIEW_TYPE_HEADER_OR_FOOTER) {
p.recycledHeaderFooter = true;
}
addViewInLayout(child, flowDown ? -1 : 0, p, true);
// add view in layout will reset the RTL properties. We have to re-resolve them
child.resolveRtlPropertiesIfNeeded();
}
if (needToMeasure) {
final int childWidthSpec = ViewGroup.getChildMeasureSpec(mWidthMeasureSpec,
mListPadding.left + mListPadding.right, p.width);
final int lpHeight = p.height;
final int childHeightSpec;
if (lpHeight > 0) {
childHeightSpec = MeasureSpec.makeMeasureSpec(lpHeight, MeasureSpec.EXACTLY);
} else {
childHeightSpec = MeasureSpec.makeSafeMeasureSpec(getMeasuredHeight(),
MeasureSpec.UNSPECIFIED);
}
child.measure(childWidthSpec, childHeightSpec);
} else {
cleanupLayoutState(child);
}
final int w = child.getMeasuredWidth();
final int h = child.getMeasuredHeight();
final int childTop = flowDown ? y : y - h;
if (needToMeasure) {
final int childRight = childrenLeft + w;
final int childBottom = childTop + h;
child.layout(childrenLeft, childTop, childRight, childBottom);
} else {
child.offsetLeftAndRight(childrenLeft - child.getLeft());
child.offsetTopAndBottom(childTop - child.getTop());
}
if (mCachingStarted && !child.isDrawingCacheEnabled()) {
child.setDrawingCacheEnabled(true);
}
Trace.traceEnd(Trace.TRACE_TAG_VIEW);
}
複製代碼
那麼這個View也會做爲obtainView()的結果進行返回，並最終傳入到setupChild()方法當中。其實也就是說，第一次layout過程中，全部的子View都是調用LayoutInflater的inflate()方法加載出來的，這樣就會相對比較耗時，可是不用擔憂，後面就不會再有這種狀況了！
setupChild()方法當中的代碼雖然比較多，可是咱們只看核心代碼的話就很是簡單了，剛纔調用obtainView()方法獲取到的子元素View，這裏在第61行調用了addViewInLayout()方法將它添加到了ListView當中。那麼根據fillDown()方法中的while循環，會讓子元素View將整個ListView控件填滿而後就跳出，也就是說即便咱們的Adapter中有一千條數據，ListView也只會加載第一屏的數據，剩下的數據反正目前在屏幕上也看不到，因此不會去作多餘的加載工做，這樣就能夠保證ListView中的內容可以迅速展現到屏幕上。 若是須要needToMeasure，會設置view的自身measue和位於父view的位置（layout（）方法），這樣第一次layout()方法結束，並在父view展現了滿屏的子view。 ##第二次Layout
layoutChildren()過程會執行兩次，而這個過程中涉及到向ListView中添加子元素，若是相同的邏輯執行兩遍的話，那麼ListView中就會存在一份重複的數據了。所以ListView在layoutChildren()過程中作了第二次Layout的邏輯處理，很是巧妙地解決了這個問題，
protected void layoutChildren() {
final boolean blockLayoutRequests = mBlockLayoutRequests;
if (blockLayoutRequests) {
return;
}
mBlockLayoutRequests = true;
try {
super.layoutChildren();
invalidate();
if (mAdapter == null) {
resetList();
invokeOnItemScrollListener();
return;
}
final int childrenTop = mListPadding.top;
final int childrenBottom = mBottom - mTop - mListPadding.bottom;
final int childCount = getChildCount();
int index = 0;
int delta = 0;
View sel;
View oldSel = null;
View oldFirst = null;
View newSel = null;
// Remember stuff we will need down below
switch (mLayoutMode) {
case LAYOUT_SET_SELECTION:
index = mNextSelectedPosition - mFirstPosition;
if (index >= 0 && index < childCount) {
newSel = getChildAt(index);
}
break;
case LAYOUT_FORCE_TOP:
case LAYOUT_FORCE_BOTTOM:
case LAYOUT_SPECIFIC:
case LAYOUT_SYNC:
break;
case LAYOUT_MOVE_SELECTION:
default:
// Remember the previously selected view
index = mSelectedPosition - mFirstPosition;
if (index >= 0 && index < childCount) {
oldSel = getChildAt(index);
}
// Remember the previous first child
oldFirst = getChildAt(0);
if (mNextSelectedPosition >= 0) {
delta = mNextSelectedPosition - mSelectedPosition;
}
// Caution: newSel might be null
newSel = getChildAt(index + delta);
}
boolean dataChanged = mDataChanged;
if (dataChanged) {
handleDataChanged();
}
// Handle the empty set by removing all views that are visible
// and calling it a day
if (mItemCount == 0) {
resetList();
invokeOnItemScrollListener();
return;
} else if (mItemCount != mAdapter.getCount()) {
throw new IllegalStateException("The content of the adapter has changed but "
+ "ListView did not receive a notification. Make sure the content of "
+ "your adapter is not modified from a background thread, but only from "
+ "the UI thread. Make sure your adapter calls notifyDataSetChanged() "
+ "when its content changes. [in ListView(" + getId() + ", " + getClass()
+ ") with Adapter(" + mAdapter.getClass() + ")]");
}
setSelectedPositionInt(mNextSelectedPosition);
AccessibilityNodeInfo accessibilityFocusLayoutRestoreNode = null;
View accessibilityFocusLayoutRestoreView = null;
int accessibilityFocusPosition = INVALID_POSITION;
// Remember which child, if any, had accessibility focus. This must
// occur before recycling any views, since that will clear
// accessibility focus.
final ViewRootImpl viewRootImpl = getViewRootImpl();
if (viewRootImpl != null) {
final View focusHost = viewRootImpl.getAccessibilityFocusedHost();
if (focusHost != null) {
final View focusChild = getAccessibilityFocusedChild(focusHost);
if (focusChild != null) {
if (!dataChanged || isDirectChildHeaderOrFooter(focusChild)
|| (focusChild.hasTransientState() && mAdapterHasStableIds)) {
// The views won't be changing, so try to maintain // focus on the current host and virtual view. accessibilityFocusLayoutRestoreView = focusHost; accessibilityFocusLayoutRestoreNode = viewRootImpl .getAccessibilityFocusedVirtualView(); } // If all else fails, maintain focus at the same // position. accessibilityFocusPosition = getPositionForView(focusChild); } } } View focusLayoutRestoreDirectChild = null; View focusLayoutRestoreView = null; // Take focus back to us temporarily to avoid the eventual call to // clear focus when removing the focused child below from messing // things up when ViewAncestor assigns focus back to someone else. final View focusedChild = getFocusedChild(); if (focusedChild != null) { // TODO: in some cases focusedChild.getParent() == null // We can remember the focused view to restore after re-layout // if the data hasn't changed, or if the focused position is a
// header or footer.
if (!dataChanged || isDirectChildHeaderOrFooter(focusedChild)
|| focusedChild.hasTransientState() || mAdapterHasStableIds) {
focusLayoutRestoreDirectChild = focusedChild;
// Remember the specific view that had focus.
focusLayoutRestoreView = findFocus();
if (focusLayoutRestoreView != null) {
// Tell it we are going to mess with it.
focusLayoutRestoreView.dispatchStartTemporaryDetach();
}
}
requestFocus();
}
// Pull all children into the RecycleBin.
// These views will be reused if possible
final int firstPosition = mFirstPosition;
final RecycleBin recycleBin = mRecycler;
if (dataChanged) {
for (int i = 0; i < childCount; i++) {
recycleBin.addScrapView(getChildAt(i), firstPosition+i);
}
} else {
recycleBin.fillActiveViews(childCount, firstPosition);
}
// Clear out old views
detachAllViewsFromParent();
recycleBin.removeSkippedScrap();
switch (mLayoutMode) {
case LAYOUT_SET_SELECTION:
if (newSel != null) {
sel = fillFromSelection(newSel.getTop(), childrenTop, childrenBottom);
} else {
sel = fillFromMiddle(childrenTop, childrenBottom);
}
break;
case LAYOUT_SYNC:
sel = fillSpecific(mSyncPosition, mSpecificTop);
break;
case LAYOUT_FORCE_BOTTOM:
sel = fillUp(mItemCount - 1, childrenBottom);
adjustViewsUpOrDown();
break;
case LAYOUT_FORCE_TOP:
mFirstPosition = 0;
sel = fillFromTop(childrenTop);
adjustViewsUpOrDown();
break;
case LAYOUT_SPECIFIC:
final int selectedPosition = reconcileSelectedPosition();
sel = fillSpecific(selectedPosition, mSpecificTop);
/**
* When ListView is resized, FocusSelector requests an async selection for the
* previously focused item to make sure it is still visible. If the item is not
* selectable, it won't regain focus so instead we call FocusSelector * to directly request focus on the view after it is visible. */ if (sel == null && mFocusSelector != null) { final Runnable focusRunnable = mFocusSelector .setupFocusIfValid(selectedPosition); if (focusRunnable != null) { post(focusRunnable); } } break; case LAYOUT_MOVE_SELECTION: sel = moveSelection(oldSel, newSel, delta, childrenTop, childrenBottom); break; default: if (childCount == 0) { if (!mStackFromBottom) { final int position = lookForSelectablePosition(0, true); setSelectedPositionInt(position); sel = fillFromTop(childrenTop); } else { final int position = lookForSelectablePosition(mItemCount - 1, false); setSelectedPositionInt(position); sel = fillUp(mItemCount - 1, childrenBottom); } } else { if (mSelectedPosition >= 0 && mSelectedPosition < mItemCount) { sel = fillSpecific(mSelectedPosition, oldSel == null ? childrenTop : oldSel.getTop()); } else if (mFirstPosition < mItemCount) { sel = fillSpecific(mFirstPosition, oldFirst == null ? childrenTop : oldFirst.getTop()); } else { sel = fillSpecific(0, childrenTop); } } break; } // Flush any cached views that did not get reused above recycleBin.scrapActiveViews(); // remove any header/footer that has been temp detached and not re-attached removeUnusedFixedViews(mHeaderViewInfos); removeUnusedFixedViews(mFooterViewInfos); if (sel != null) { // The current selected item should get focus if items are // focusable. if (mItemsCanFocus && hasFocus() && !sel.hasFocus()) { final boolean focusWasTaken = (sel == focusLayoutRestoreDirectChild && focusLayoutRestoreView != null && focusLayoutRestoreView.requestFocus()) || sel.requestFocus(); if (!focusWasTaken) { // Selected item didn't take focus, but we still want to
// make sure something else outside of the selected view
// has focus.
final View focused = getFocusedChild();
if (focused != null) {
focused.clearFocus();
}
positionSelector(INVALID_POSITION, sel);
} else {
sel.setSelected(false);
mSelectorRect.setEmpty();
}
} else {
positionSelector(INVALID_POSITION, sel);
}
mSelectedTop = sel.getTop();
} else {
final boolean inTouchMode = mTouchMode == TOUCH_MODE_TAP
|| mTouchMode == TOUCH_MODE_DONE_WAITING;
if (inTouchMode) {
// If the user's finger is down, select the motion position. final View child = getChildAt(mMotionPosition - mFirstPosition); if (child != null) { positionSelector(mMotionPosition, child); } } else if (mSelectorPosition != INVALID_POSITION) { // If we had previously positioned the selector somewhere, // put it back there. It might not match up with the data, // but it's transitioning out so it's not a big deal. final View child = getChildAt(mSelectorPosition - mFirstPosition); if (child != null) { positionSelector(mSelectorPosition, child); } } else { // Otherwise, clear selection. mSelectedTop = 0; mSelectorRect.setEmpty(); } // Even if there is not selected position, we may need to // restore focus (i.e. something focusable in touch mode). if (hasFocus() && focusLayoutRestoreView != null) { focusLayoutRestoreView.requestFocus(); } } // Attempt to restore accessibility focus, if necessary. if (viewRootImpl != null) { final View newAccessibilityFocusedView = viewRootImpl.getAccessibilityFocusedHost(); if (newAccessibilityFocusedView == null) { if (accessibilityFocusLayoutRestoreView != null && accessibilityFocusLayoutRestoreView.isAttachedToWindow()) { final AccessibilityNodeProvider provider = accessibilityFocusLayoutRestoreView.getAccessibilityNodeProvider(); if (accessibilityFocusLayoutRestoreNode != null && provider != null) { final int virtualViewId = AccessibilityNodeInfo.getVirtualDescendantId( accessibilityFocusLayoutRestoreNode.getSourceNodeId()); provider.performAction(virtualViewId, AccessibilityNodeInfo.ACTION_ACCESSIBILITY_FOCUS, null); } else { accessibilityFocusLayoutRestoreView.requestAccessibilityFocus(); } } else if (accessibilityFocusPosition != INVALID_POSITION) { // Bound the position within the visible children. final int position = MathUtils.constrain( accessibilityFocusPosition - mFirstPosition, 0, getChildCount() - 1); final View restoreView = getChildAt(position); if (restoreView != null) { restoreView.requestAccessibilityFocus(); } } } } // Tell focus view we are done mucking with it, if it is still in // our view hierarchy. if (focusLayoutRestoreView != null && focusLayoutRestoreView.getWindowToken() != null) { focusLayoutRestoreView.dispatchFinishTemporaryDetach(); } mLayoutMode = LAYOUT_NORMAL; mDataChanged = false; if (mPositionScrollAfterLayout != null) { post(mPositionScrollAfterLayout); mPositionScrollAfterLayout = null; } mNeedSync = false; setNextSelectedPositionInt(mSelectedPosition); updateScrollIndicators(); if (mItemCount > 0) { checkSelectionChanged(); } invokeOnItemScrollListener(); } finally { if (mFocusSelector != null) { mFocusSelector.onLayoutComplete(); } if (!blockLayoutRequests) { mBlockLayoutRequests = false; } } } 複製代碼
final int childCount = getChildCount();
複製代碼
一樣仍是這段代碼，調用getChildCount()方法來獲取子View的數量，只不過如今獲得的值不會再是0了，而是ListView中一屏能夠顯示的子View數量，由於咱們剛剛在第一次Layout過程中向ListView添加了這麼多的子View。
if (dataChanged) {
for (int i = 0; i < childCount; i++) {
recycleBin.addScrapView(getChildAt(i), firstPosition+i);
}
} else {
recycleBin.fillActiveViews(childCount, firstPosition);
}
複製代碼
調用了RecycleBin的fillActiveViews()方法， 此次效果可就不同了，由於目前ListView中已經有子View了，這樣全部的子View都會被緩存到RecycleBin的mActiveViews數組當中，後面將會用到它們。
detachAllViewsFromParent()
複製代碼
接下來將會是很是很是重要的一個操做，調用了detachAllViewsFromParent()方法。這個方法會將全部ListView當中的子View所有清除掉，從而保證第二次Layout過程不會產生一份重複的數據。那有的朋友可能會問了，這樣把已經加載好的View又清除掉，待會還要再從新加載一遍，這不是嚴重影響效率嗎？不用擔憂，還記得咱們剛剛調用了RecycleBin的fillActiveViews()方法來緩存子View嗎，待會兒將會直接使用這些緩存好的View來進行加載，而並不會從新執行一遍inflate過程，所以效率方面並不會有什麼明顯的影響。
default:
if (childCount == 0) {
if (!mStackFromBottom) {
final int position = lookForSelectablePosition(0, true);
setSelectedPositionInt(position);
sel = fillFromTop(childrenTop);
} else {
final int position = lookForSelectablePosition(mItemCount - 1, false);
setSelectedPositionInt(position);
sel = fillUp(mItemCount - 1, childrenBottom);
}
} else {
if (mSelectedPosition >= 0 && mSelectedPosition < mItemCount) {
sel = fillSpecific(mSelectedPosition,
oldSel == null ? childrenTop : oldSel.getTop());
} else if (mFirstPosition < mItemCount) {
sel = fillSpecific(mFirstPosition,
oldFirst == null ? childrenTop : oldFirst.getTop());
} else {
sel = fillSpecific(0, childrenTop);
}
}
break;
複製代碼
這樣與第一次的Layout大不相同，childCount不會爲0， 這樣就會走else這面的代碼！
那麼咱們接着，因爲再也不等於0了，所以會進入到else語句當中。而else語句中又有三個邏輯判斷，第一個邏輯判斷不成立，由於默認狀況下咱們沒有選中任何子元素，mSelectedPosition應該等於-1。第二個邏輯判斷一般是成立的，由於mFirstPosition的值一開始是等於0的，只要adapter中的數據大於0條件就成立。那麼進入到fillSpecific()方法當中，代碼以下所示：
private View fillSpecific(int position, int top) {
boolean tempIsSelected = position == mSelectedPosition;
View temp = makeAndAddView(position, top, true, mListPadding.left, tempIsSelected);
// Possibly changed again in fillUp if we add rows above this one.
mFirstPosition = position;
View above;
View below;
final int dividerHeight = mDividerHeight;
if (!mStackFromBottom) {
above = fillUp(position - 1, temp.getTop() - dividerHeight);
// This will correct for the top of the first view not touching the top of the list
adjustViewsUpOrDown();
below = fillDown(position + 1, temp.getBottom() + dividerHeight);
int childCount = getChildCount();
if (childCount > 0) {
correctTooHigh(childCount);
}
} else {
below = fillDown(position + 1, temp.getBottom() + dividerHeight);
// This will correct for the bottom of the last view not touching the bottom of the list
adjustViewsUpOrDown();
above = fillUp(position - 1, temp.getTop() - dividerHeight);
int childCount = getChildCount();
if (childCount > 0) {
correctTooLow(childCount);
}
}
if (tempIsSelected) {
return temp;
} else if (above != null) {
return above;
} else {
return below;
}
}
複製代碼
fillSpecific()這算是一個新方法了，不過其實它和fillUp()、fillDown()方法功能也是差很少的，主要的區別在於，fillSpecific()方法會優先將指定位置的子View先加載到屏幕上，而後再加載該子View往上以及往下的其它子View。那麼因爲這裏咱們傳入的position就是第一個子View的位置，因而fillSpecific()方法的做用就基本上和fillDown()方法是差很少的了，這裏咱們就不去關注太多它的細節，而是將精力放在makeAndAddView()方法上面。再次回到makeAndAddView()方法，代碼以下所示：
private View makeAndAddView(int position, int y, boolean flow, int childrenLeft,
boolean selected) {
if (!mDataChanged) {
// Try to use an existing view for this position.
final View activeView = mRecycler.getActiveView(position);
if (activeView != null) {
// Found it. We're reusing an existing child, so it just needs // to be positioned like a scrap view. setupChild(activeView, position, y, flow, childrenLeft, selected, true); return activeView; } } // Make a new view for this position, or convert an unused view if // possible. final View child = obtainView(position, mIsScrap); // This needs to be positioned and measured. setupChild(child, position, y, flow, childrenLeft, selected, mIsScrap[0]); return child; } 複製代碼
由於
final View activeView = mRecycler.getActiveView(position);
複製代碼
第二次Layout的時候activeView確定不爲空了，由於前面已經
recycleBin.fillActiveViews(childCount, firstPosition);
複製代碼
這樣了，因此會再次走向
private void setupChild(View child, int position, int y, boolean flowDown, int childrenLeft,
boolean selected, boolean isAttachedToWindow) {
Trace.traceBegin(Trace.TRACE_TAG_VIEW, "setupListItem");
final boolean isSelected = selected && shouldShowSelector();
final boolean updateChildSelected = isSelected != child.isSelected();
final int mode = mTouchMode;
final boolean isPressed = mode > TOUCH_MODE_DOWN && mode < TOUCH_MODE_SCROLL
&& mMotionPosition == position;
final boolean updateChildPressed = isPressed != child.isPressed();
final boolean needToMeasure = !isAttachedToWindow || updateChildSelected
|| child.isLayoutRequested();
// Respect layout params that are already in the view. Otherwise make
// some up...
AbsListView.LayoutParams p = (AbsListView.LayoutParams) child.getLayoutParams();
if (p == null) {
p = (AbsListView.LayoutParams) generateDefaultLayoutParams();
}
p.viewType = mAdapter.getItemViewType(position);
p.isEnabled = mAdapter.isEnabled(position);
// Set up view state before attaching the view, since we may need to
// rely on the jumpDrawablesToCurrentState() call that occurs as part
// of view attachment.
if (updateChildSelected) {
child.setSelected(isSelected);
}
if (updateChildPressed) {
child.setPressed(isPressed);
}
if (mChoiceMode != CHOICE_MODE_NONE && mCheckStates != null) {
if (child instanceof Checkable) {
((Checkable) child).setChecked(mCheckStates.get(position));
} else if (getContext().getApplicationInfo().targetSdkVersion
>= android.os.Build.VERSION_CODES.HONEYCOMB) {
child.setActivated(mCheckStates.get(position));
}
}
if ((isAttachedToWindow && !p.forceAdd) || (p.recycledHeaderFooter
&& p.viewType == AdapterView.ITEM_VIEW_TYPE_HEADER_OR_FOOTER)) {
attachViewToParent(child, flowDown ? -1 : 0, p);
// If the view was previously attached for a different position,
// then manually jump the drawables.
if (isAttachedToWindow
&& (((AbsListView.LayoutParams) child.getLayoutParams()).scrappedFromPosition)
!= position) {
child.jumpDrawablesToCurrentState();
}
} else {
p.forceAdd = false;
if (p.viewType == AdapterView.ITEM_VIEW_TYPE_HEADER_OR_FOOTER) {
p.recycledHeaderFooter = true;
}
addViewInLayout(child, flowDown ? -1 : 0, p, true);
// add view in layout will reset the RTL properties. We have to re-resolve them
child.resolveRtlPropertiesIfNeeded();
}
if (needToMeasure) {
final int childWidthSpec = ViewGroup.getChildMeasureSpec(mWidthMeasureSpec,
mListPadding.left + mListPadding.right, p.width);
final int lpHeight = p.height;
final int childHeightSpec;
if (lpHeight > 0) {
childHeightSpec = MeasureSpec.makeMeasureSpec(lpHeight, MeasureSpec.EXACTLY);
} else {
childHeightSpec = MeasureSpec.makeSafeMeasureSpec(getMeasuredHeight(),
MeasureSpec.UNSPECIFIED);
}
child.measure(childWidthSpec, childHeightSpec);
} else {
cleanupLayoutState(child);
}
final int w = child.getMeasuredWidth();
final int h = child.getMeasuredHeight();
final int childTop = flowDown ? y : y - h;
if (needToMeasure) {
final int childRight = childrenLeft + w;
final int childBottom = childTop + h;
child.layout(childrenLeft, childTop, childRight, childBottom);
} else {
child.offsetLeftAndRight(childrenLeft - child.getLeft());
child.offsetTopAndBottom(childTop - child.getTop());
}
if (mCachingStarted && !child.isDrawingCacheEnabled()) {
child.setDrawingCacheEnabled(true);
}
Trace.traceEnd(Trace.TRACE_TAG_VIEW);
}
複製代碼
由於這面的isAttachedToWindow是true，能夠看到，setupChild()方法的最後一個參數是recycled，而後在
if ((isAttachedToWindow && !p.forceAdd) || (p.recycledHeaderFooter
&& p.viewType == AdapterView.ITEM_VIEW_TYPE_HEADER_OR_FOOTER)) {
attachViewToParent(child, flowDown ? -1 : 0, p);
// If the view was previously attached for a different position,
// then manually jump the drawables.
if (isAttachedToWindow
&& (((AbsListView.LayoutParams) child.getLayoutParams()).scrappedFromPosition)
!= position) {
child.jumpDrawablesToCurrentState();
}
} else {
p.forceAdd = false;
if (p.viewType == AdapterView.ITEM_VIEW_TYPE_HEADER_OR_FOOTER) {
p.recycledHeaderFooter = true;
}
addViewInLayout(child, flowDown ? -1 : 0, p, true);
// add view in layout will reset the RTL properties. We have to re-resolve them
child.resolveRtlPropertiesIfNeeded();
}
複製代碼
會對這個變量進行判斷，因爲recycled如今是true，因此會執行attachViewToParent()方法，而第一次Layout過程則是執行的else語句中的addViewInLayout()方法。這兩個方法最大的區別在於，若是咱們須要向ViewGroup中添加一個新的子View，應該調用addViewInLayout()方法，而若是是想要將一個以前detach的View從新attach到ViewGroup上，就應該調用attachViewToParent()方法。那麼因爲前面在layoutChildren()方法當中調用了detachAllViewsFromParent()方法，這樣ListView中全部的子View都是處於detach狀態的，因此這裏attachViewToParent()方法是正確的選擇。再次綁定到ViewGroup中！
protected void attachViewToParent(View child, int index, LayoutParams params) {
child.mLayoutParams = params;
if (index < 0) {
index = mChildrenCount;
}
addInArray(child, index);
child.mParent = this;
child.mPrivateFlags = (child.mPrivateFlags & ~PFLAG_DIRTY_MASK
& ~PFLAG_DRAWING_CACHE_VALID)
| PFLAG_DRAWN | PFLAG_INVALIDATED;
this.mPrivateFlags |= PFLAG_INVALIDATED;
if (child.hasFocus()) {
requestChildFocus(child, child.findFocus());
}
dispatchVisibilityAggregated(isAttachedToWindow() && getWindowVisibility() == VISIBLE
&& isShown());
notifySubtreeAccessibilityStateChangedIfNeeded();
}
複製代碼
經過addInArray(child, index);這個方法把原來detach的view數組加進去 經歷了這樣一個detach又attach的過程，ListView中全部的子View又均可以正常顯示出來了，那麼第二次Layout過程結束。
這樣ListView就會第一次把itemView全屏展現出來了！ 下文將會講解ListView緩存策略及滑動展現複用view！
相關文章
- 1. android源碼解析--ListView（上）
- 2. 源碼解析之ListView
- 3. ListView源碼解析
- 4. Android ListView緩存複用原理 源碼解析
- 5. android高級ui之ListView源碼分析
- 6. Log4j源碼解析--Layout類解析
- 7. Android源碼解析：Intent實現原理
- 8. ListView[2] 源碼解析
- 9. Android源碼解析：LayoutInflater源碼解析
- 10. ListView源碼分析
- 更多相關文章...
- • XML DOM 解析器 - XML DOM 教程
- • MyBatis的工作原理 - MyBatis教程
- • 互聯網組織的未來：剖析GitHub員工的任性之源
- • Java Agent入門實戰（三）-JVM Attach原理與使用
相關標籤/搜索
每日一句
-
每一个你不满意的现在，都有一个你没有努力的曾经。
最新文章
歡迎關注本站公眾號,獲取更多信息
