Kubernetes V1.15 二進制部署集羣

時間 2019-11-06

原文原文鏈接

1. 架構篇

1.1 kubernetes 架構說明

1.2 Flannel網絡架構圖

集羣功能各模塊功能描述：
Master節點：
Master節點上面主要由四個模塊組成，APIServer，schedule,controller-manager,etcd
APIServer: APIServer負責對外提供RESTful的kubernetes API的服務，它是系統管理指令的統一接口，任何對資源的增刪該查都要交給APIServer處理後再交給etcd，如圖，kubectl(kubernetes提供的客戶端工具，該工具內部是對kubernetes API的調用）是直接和APIServer交互的。
schedule: schedule負責調度Pod到合適的Node上，若是把scheduler當作一個黑匣子，那麼它的輸入是pod和由多個Node組成的列表，輸出是Pod和一個Node的綁定。 kubernetes目前提供了調度算法，一樣也保留了接口。用戶根據本身的需求定義本身的調度算法。
controller manager: 若是APIServer作的是前臺的工做的話，那麼controller manager就是負責後臺的。每個資源都對應一個控制器。而control manager就是負責管理這些控制器的，好比咱們經過APIServer建立了一個Pod，當這個Pod建立成功後，APIServer的任務就算完成了。
etcd：etcd是一個高可用的鍵值存儲系統，kubernetes使用它來存儲各個資源的狀態，從而實現了Restful的API。node

Node節點：
每一個Node節點主要由三個模板組成：kublet, kube-proxy
kube-proxy: 該模塊實現了kubernetes中的服務發現和反向代理功能。kube-proxy支持TCP和UDP鏈接轉發，默認基Round Robin算法將客戶端流量轉發到與service對應的一組後端pod。服務發現方面，kube-proxy使用etcd的watch機制監控集羣中service和endpoint對象數據的動態變化，而且維護一個service到endpoint的映射關係，從而保證了後端pod的IP變化不會對訪問者形成影響，另外，kube-proxy還支持session affinity。
kublet：kublet是Master在每一個Node節點上面的agent，是Node節點上面最重要的模塊，它負責維護和管理該Node上的全部容器，可是若是容器不是經過kubernetes建立的，它並不會管理。本質上，它負責使Pod的運行狀態與指望的狀態一致。linux

1.3 Kubernetes工做流程

2. 環境說明

2.1 部署節點說明

主機名	IP	用途	部署軟件
k8s-1	192.168.123.211	master	apiserver,scheduler,controller-manager etcd,flanneld
k8s-2	192.168.123.212	node	kubelet,kube-proxy etcd,flanneld
k8s-3	192.168.123.213	node	kubelet,kube-proxy etcd,flanneld

2.2 操做系統環境

# 三臺機器相同
[root@k8s-1 /root] master
# uname  -r
3.10.0-957.el7.x86_64

[root@k8s-1 /root] master
# cat  /etc/redhat-release
CentOS Linux release 7.6.1810 (Core)

[root@k8s-1 /root] master
# sestatus
SELinux status:                 disabled

2.3 軟件包版本

軟件包	下載地址
kubernetes-node-linux-amd64.tar.gz	https://dl.k8s.io/v1.15.1/kubernetes-node-linux-amd64.tar.gz
kubernetes-server-linux-amd64.tar.gz	https://dl.k8s.io/v1.15.1/kubernetes-server-linux-amd64.tar.gz
flannel-v0.11.0-linux-amd64.tar.gz	https://github.com/coreos/flannel/releases/download/v0.11.0/flannel-v0.11.0-linux-amd64.tar.gz
etcd-v3.3.10-linux-amd64.tar.gz	https://github.com/etcd-io/etcd/releases/download/v3.3.10/etcd-v3.3.10-linux-amd64.tar.gz

3. Kubernetes 安裝及配置

3.1 初始化環境

3.1.1 設置關閉防火牆及SELINUX

systemctl stop firewalld && systemctl disable firewalld
setenforce 0
vi /etc/selinux/config
SELINUX=disabled

3.1.2 關閉swap

swapoff -a && sysctl -w vm.swappiness=0
sed -i '/ swap / s/^\(.*\)$/#\1/g' /etc/fstab

3.1.3 設置Docker所需參數

cat > /etc/sysctl.d/kubernetes.conf <<EOF
net.ipv4.ip_forward=1
net.ipv4.tcp_tw_recycle=0
vm.swappiness=0
vm.overcommit_memory=1
vm.panic_on_oom=0
fs.inotify.max_user_watches=89100
fs.file-max=52706963
fs.nr_open=52706963
net.ipv6.conf.all.disable_ipv6=1
EOF
sysctl -p  /etc/sysctl.d/kubernetes.conf

3.1.4 安裝 Docker

# 配置yum源
cd  /etc/yum.repo.d/
wget https://mirrors.aliyun.com/docker-ce/linux/centos/docker-ce.repo
yum clean all ;yum  repolist -y

# 安裝docker ，版本 18.06.2
yum  install  docker-ce-18.06.2.ce-3.el7 -y

# 啓動
systemctl start docker && systemctl enable docker

3.1.5 建立相關目錄

# 建立安裝包存儲目錄
mkdir  /data/{install,ssl_config} -p
mkdir /data/ssl_config/{etcd,kubernetes}  -p

# 建立安裝目錄
mkdir /cloud/k8s/etcd/{bin,cfg,ssl} -p
mkdir /cloud/k8s/kubernetes/{bin,cfg,ssl} -p

3.1.6 SSH 互信配置

ssh-keygen
ssh-copy-id  k8s-1
ssh-copy-id  k8s-2
ssh-copy-id  k8s-3

3.1.7 添加 PATH 變量

vi /etc/profile
export PATH=$PATH:/cloud/k8s/etcd/bin/:/cloud/k8s/kubernetes/bin/

3.2 建立ssl證書

3.2.1 安裝及配置CFSSL

wget https://pkg.cfssl.org/R1.2/cfssl_linux-amd64
wget https://pkg.cfssl.org/R1.2/cfssljson_linux-amd64
wget https://pkg.cfssl.org/R1.2/cfssl-certinfo_linux-amd64
chmod +x cfssl_linux-amd64 cfssljson_linux-amd64 cfssl-certinfo_linux-amd64
mv cfssl_linux-amd64 /usr/local/bin/cfssl
mv cfssljson_linux-amd64 /usr/local/bin/cfssljson
mv cfssl-certinfo_linux-amd64 /usr/bin/cfssl-certinfo

3.2.2 建立 ETCD 相關證書

如下操做均在/data/ssl_config/etcd/目錄中
etcd證書ca配置
git

cd /data/ssl_config/etcd/

cat << EOF | tee ca-config.json
{
  "signing": {
    "default": {
      "expiry": "87600h"
    },
    "profiles": {
      "www": {
         "expiry": "87600h",
         "usages": [
            "signing",
            "key encipherment",
            "server auth",
            "client auth"
        ]
      }
    }
  }
}
EOF

建立 ETCD CA 配置文件github

cat << EOF | tee ca-csr.json
{
    "CN": "etcd CA",
    "key": {
        "algo": "rsa",
        "size": 2048
    },
    "names": [
        {
            "C": "CN",
            "L": "Beijing",
            "ST": "Beijing"
        }
    ]
}
EOF

建立 ETCD Server 證書算法

cat << EOF | tee server-csr.json
{
    "CN": "etcd",
    "hosts": [
    "k8s-3",
    "k8s-2",
    "k8s-1",
    "192.168.123.211",
    "192.168.123.212",
    "192.168.123.213"
    ],
    "key": {
        "algo": "rsa",
        "size": 2048
    },
    "names": [
        {
            "C": "CN",
            "L": "Beijing",
            "ST": "Beijing"
        }
    ]
}
EOF

生成 ETCD CA 證書和私鑰docker

cd /data/ssl_config/etcd/
# 生成ca證書
cfssl gencert -initca ca-csr.json | cfssljson -bare ca -
# 生成server證書
cfssl gencert -ca=ca.pem -ca-key=ca-key.pem -config=ca-config.json -profile=www server-csr.json | cfssljson -bare server

3.2.3 建立 Kubernetes 相關證書

如下操做均在/data/ssl_config/kubernetes/目錄中
kubernetes 證書ca配置json

cd /data/ssl_config/kubernetes/
cat << EOF | tee ca-config.json
{
  "signing": {
    "default": {
      "expiry": "87600h"
    },
    "profiles": {
      "kubernetes": {
         "expiry": "87600h",
         "usages": [
            "signing",
            "key encipherment",
            "server auth",
            "client auth"
        ]
      }
    }
  }
}
EOF

建立ca證書配置bootstrap

cat << EOF | tee ca-csr.json
{
    "CN": "kubernetes",
    "key": {
        "algo": "rsa",
        "size": 2048
    },
    "names": [
        {
            "C": "CN",
            "L": "Beijing",
            "ST": "Beijing",
            "O": "k8s",
            "OU": "System"
        }
    ]
}
EOF

生成API_SERVER證書vim

cat << EOF | tee server-csr.json
{
    "CN": "kubernetes",
    "hosts": [
      "10.0.0.1",
      "127.0.0.1",
      "192.168.123.211",
      "k8s-1",
      "kubernetes",
      "kubernetes.default",
      "kubernetes.default.svc",
      "kubernetes.default.svc.cluster",
      "kubernetes.default.svc.cluster.local"
    ],
    "key": {
        "algo": "rsa",
        "size": 2048
    },
    "names": [
        {
            "C": "CN",
            "L": "Beijing",
            "ST": "Beijing",
            "O": "k8s",
            "OU": "System"
        }
    ]
}
EOF

建立 Kubernetes Proxy 證書後端

cat << EOF | tee kube-proxy-csr.json
{
  "CN": "system:kube-proxy",
  "hosts": [],
  "key": {
    "algo": "rsa",
    "size": 2048
  },
  "names": [
    {
      "C": "CN",
      "L": "Beijing",
      "ST": "Beijing",
      "O": "k8s",
      "OU": "System"
    }
  ]
}
EOF

生成 kubernetes CA 證書和私鑰

# 生成ca證書
cfssl gencert -initca ca-csr.json | cfssljson -bare ca -
# 生成 api-server 證書
cfssl gencert -ca=ca.pem -ca-key=ca-key.pem -config=ca-config.json -profile=kubernetes server-csr.json | cfssljson -bare server
# 生成 kube-proxy 證書
cfssl gencert -ca=ca.pem -ca-key=ca-key.pem -config=ca-config.json -profile=kubernetes kube-proxy-csr.json | cfssljson -bare kube-proxy

3.3 部署etcd

3.3.1 配置軟件包

cd /data/install/
tar -xvf etcd-v3.3.10-linux-amd64.tar.gz
cd etcd-v3.3.10-linux-amd64/
cp etcd etcdctl /cloud/k8s/etcd/bin/

3.3.2 編輯etcd配置文件

vim /cloud/k8s/etcd/cfg/etcd
#[Member]
ETCD_NAME="etcd01"
ETCD_DATA_DIR="/var/lib/etcd/default.etcd"
ETCD_LISTEN_PEER_URLS="https://192.168.123.211:2380"
ETCD_LISTEN_CLIENT_URLS="https://192.168.123.211:2379"

#[Clustering]
ETCD_INITIAL_ADVERTISE_PEER_URLS="https://192.168.123.211:2380"
ETCD_ADVERTISE_CLIENT_URLS="https://192.168.123.211:2379"
ETCD_INITIAL_CLUSTER="etcd01=https://192.168.123.211:2380,etcd02=https://192.168.123.212:2380,etcd03=https://192.168.123.213:2380"
ETCD_INITIAL_CLUSTER_TOKEN="etcd-cluster"
ETCD_INITIAL_CLUSTER_STATE="new"

3.3.3 建立 etcd的 systemd unit 文件

vim /usr/lib/systemd/system/etcd.service
[Unit]
Description=Etcd Server
After=network.target
After=network-online.target
Wants=network-online.target

[Service]
Type=notify
EnvironmentFile=/cloud/k8s/etcd/cfg/etcd
ExecStart=/cloud/k8s/etcd/bin/etcd \
--name=${ETCD_NAME} \
--data-dir=${ETCD_DATA_DIR} \
--listen-peer-urls=${ETCD_LISTEN_PEER_URLS} \
--listen-client-urls=${ETCD_LISTEN_CLIENT_URLS},http://127.0.0.1:2379 \
--advertise-client-urls=${ETCD_ADVERTISE_CLIENT_URLS} \
--initial-advertise-peer-urls=${ETCD_INITIAL_ADVERTISE_PEER_URLS} \
--initial-cluster=${ETCD_INITIAL_CLUSTER} \
--initial-cluster-token=${ETCD_INITIAL_CLUSTER_TOKEN} \
--initial-cluster-state=new \
--cert-file=/cloud/k8s/etcd/ssl/server.pem \
--key-file=/cloud/k8s/etcd/ssl/server-key.pem \
--peer-cert-file=/cloud/k8s/etcd/ssl/server.pem \
--peer-key-file=/cloud/k8s/etcd/ssl/server-key.pem \
--trusted-ca-file=/cloud/k8s/etcd/ssl/ca.pem \
--peer-trusted-ca-file=/cloud/k8s/etcd/ssl/ca.pem
Restart=on-failure
LimitNOFILE=65536

[Install]
WantedBy=multi-user.target

3.3.4 配置證書文件

cd /data/ssl_config/etcd/
cp ca*pem server*pem /cloud/k8s/etcd/ssl

3.3.5 配置文件拷貝到節點一、節點2

cd /cloud/k8s/ 
scp -r etcd k8s-2:/cloud/k8s/
scp -r etcd k8s-3:/cloud/k8s/
scp /usr/lib/systemd/system/etcd.service  k8s-2:/usr/lib/systemd/system/etcd.service
scp /usr/lib/systemd/system/etcd.service  k8s-3:/usr/lib/systemd/system/etcd.service

修改另外兩臺機器配置文件

### k8s-2 
cat  /cloud/k8s/etcd/cfg/etcd
#[Member]
ETCD_NAME="etcd02"
ETCD_DATA_DIR="/var/lib/etcd/default.etcd"
ETCD_LISTEN_PEER_URLS="https://192.168.123.212:2380"
ETCD_LISTEN_CLIENT_URLS="https://192.168.123.212:2379"

#[Clustering]
ETCD_INITIAL_ADVERTISE_PEER_URLS="https://192.168.123.212:2380"
ETCD_ADVERTISE_CLIENT_URLS="https://192.168.123.212:2379"
ETCD_INITIAL_CLUSTER="etcd01=https://192.168.123.211:2380,etcd02=https://192.168.123.212:2380,etcd03=https://192.168.123.213:2380"
ETCD_INITIAL_CLUSTER_TOKEN="etcd-cluster"
ETCD_INITIAL_CLUSTER_STATE="new"

### k8s-3 
cat  /cloud/k8s/etcd/cfg/etcd
#[Member]
ETCD_NAME="etcd03"
ETCD_DATA_DIR="/var/lib/etcd/default.etcd"
ETCD_LISTEN_PEER_URLS="https://192.168.123.213:2380"
ETCD_LISTEN_CLIENT_URLS="https://192.168.123.213:2379"

#[Clustering]
ETCD_INITIAL_ADVERTISE_PEER_URLS="https://192.168.123.213:2380"
ETCD_ADVERTISE_CLIENT_URLS="https://192.168.123.213:2379"
ETCD_INITIAL_CLUSTER="etcd01=https://192.168.123.211:2380,etcd02=https://192.168.123.212:2380,etcd03=https://192.168.123.213:2380"
ETCD_INITIAL_CLUSTER_TOKEN="etcd-cluster"
ETCD_INITIAL_CLUSTER_STATE="new"

另外兩臺機器配置完成後，啓動etcd服務，三臺都需啓動。

3.3.6 啓動ETCD服務

systemctl daemon-reload
systemctl enable etcd
systemctl start etcd
#啓動ETCD集羣同時啓動二個節點，單節點是沒法正常啓動的。

3.3.7 檢查服務是否正常

[root@k8s-1 /cloud/k8s/etcd/bin] master
# etcdctl --ca-file=/cloud/k8s/etcd/ssl/ca.pem --cert-file=/cloud/k8s/etcd/ssl/server.pem --key-file=/cloud/k8s/etcd/ssl/server-key.pem --endpoints="https://192.168.123.211:2379,https://192.168.123.212:2379,https://192.168.123.213:2379"  cluster-health
member 4c6bfb873a73368c is healthy: got healthy result from https://192.168.123.213:2379
member 622f71dbd55b34ce is healthy: got healthy result from https://192.168.123.211:2379
member f14004aa5403b07d is healthy: got healthy result from https://192.168.123.212:2379
cluster is healthy

3.4 部署Flannel網絡

3.4.1 向 etcd 寫入集羣 Pod 網段信息

cd /cloud/k8s/etcd/bin
 etcdctl --ca-file=ca.pem --cert-file=server.pem --key-file=server-key.pem \
 --endpoints="https://192.168.123.211:2379,https://192.168.123.212:2379,https://192.168.123.213:2379" \
 set /coreos.com/network/config  \
 '{ "Network": "172.18.0.0/16", "Backend": {"Type": "vxlan"}}'

寫入的 Pod 網段 ${CLUSTER_CIDR} 必須是 /16 段地址，必須與 kube-controller-manager 的 --cluster-cidr 參數值一致；

3.4.2 部署 flannel

cd /data/install/
 tar xf  flannel-v0.11.0-linux-amd64.tar.gz
 mv flanneld mk-docker-opts.sh /cloud/k8s/kubernetes/bin/

3.5.3 配置flannel

vim  /cloud/k8s/kubernetes/cfg/flanneld
FLANNEL_OPTIONS="--etcd-endpoints=https://192.168.123.211:2379,https://192.168.123.212:2379,https://192.168.123.213:2379 -etcd-cafile=/cloud/k8s/etcd/ssl/ca.pem -etcd-certfile=/cloud/k8s/etcd/ssl/server.pem -etcd-keyfile=/cloud/k8s/etcd/ssl/server-key.pem"

3.5.4 建立 flanneld 的 systemd unit 文件

vim /usr/lib/systemd/system/flanneld.service
[Unit]
Description=Flanneld overlay address etcd agent
After=network-online.target network.target
Before=docker.service

[Service]
Type=notify
EnvironmentFile=/cloud/k8s/kubernetes/cfg/flanneld
ExecStart=/cloud/k8s/kubernetes/bin/flanneld --ip-masq $FLANNEL_OPTIONS
ExecStartPost=/cloud/k8s/kubernetes/bin/mk-docker-opts.sh -k DOCKER_NETWORK_OPTIONS -d /run/flannel/subnet.env
Restart=on-failure

[Install]
WantedBy=multi-user.target

mk-docker-opts.sh 腳本將分配給 flanneld 的 Pod 子網網段信息寫入 /run/flannel/docker 文件，後續 docker 啓動時 使用這個文件中的環境變量配置 docker0 網橋；
flanneld 使用系統缺省路由所在的接口與其它節點通訊，對於有多個網絡接口（如內網和公網）的節點，能夠用 -iface 參數指定通訊接口，如上面的 eth0 接口;
flanneld 運行時須要 root 權限；

3.5.5 配置Docker啓動指定子網段

vim /usr/lib/systemd/system/docker.service
[Unit]
Description=Docker Application Container Engine
Documentation=https://docs.docker.com
After=network-online.target firewalld.service
Wants=network-online.target

[Service]
Type=notify
EnvironmentFile=/run/flannel/subnet.env
ExecStart=/usr/bin/dockerd  $DOCKER_NETWORK_OPTIONS
ExecReload=/bin/kill -s HUP $MAINPID
LimitNOFILE=infinity
LimitNPROC=infinity
LimitCORE=infinity
TimeoutStartSec=0
Delegate=yes
KillMode=process
Restart=on-failure
StartLimitBurst=3
StartLimitInterval=60s

[Install]
WantedBy=multi-user.target

3.5.6 將flanneld systemd unit 文件到全部節點

cd /cloud/k8s/
scp -r kubernetes k8s-2:/cloud/k8s/
scp -r kubernetes k8s-3:/cloud/k8s/
scp /cloud/k8s/kubernetes/cfg/flanneld  k8s-2:/cloud/k8s/kubernetes/cfg/flanneld
scp /cloud/k8s/kubernetes/cfg/flanneld  k8s-3:/cloud/k8s/kubernetes/cfg/flanneld
scp /usr/lib/systemd/system/docker.service    k8s-2:/usr/lib/systemd/system/docker.service 
scp /usr/lib/systemd/system/docker.service    k8s-3:/usr/lib/systemd/system/docker.service
scp /usr/lib/systemd/system/flanneld.service  k8s-2:/usr/lib/systemd/system/flanneld.service 
scp /usr/lib/systemd/system/flanneld.service  k8s-3:/usr/lib/systemd/system/flanneld.service 

# 啓動服務(每臺節點都操做)
systemctl daemon-reload
systemctl start flanneld
systemctl enable flanneld
systemctl restart docker

3.5.7 驗證fannel網絡配置

[root@k8s-1 /data/install] master
# ip a
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    inet 127.0.0.1/8 scope host lo
       valid_lft forever preferred_lft forever
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP group default qlen 1000
    link/ether 00:0c:29:33:de:53 brd ff:ff:ff:ff:ff:ff
    inet 192.168.123.211/24 brd 192.168.123.255 scope global noprefixroute eth0
       valid_lft forever preferred_lft forever
3: flannel.1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1450 qdisc noqueue state UNKNOWN group default
    link/ether 1a:6f:5a:0b:c7:18 brd ff:ff:ff:ff:ff:ff
    inet 172.18.30.0/32 scope global flannel.1
       valid_lft forever preferred_lft forever
4: docker0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc noqueue state DOWN group default
    link/ether 02:42:5c:d0:df:e6 brd ff:ff:ff:ff:ff:ff
    inet 172.18.30.1/24 brd 172.18.30.255 scope global docker0
       valid_lft forever preferred_lft forever

3.5 部署 master 節點

kubernetes master 節點運行以下組件：
kube-apiserver
kube-scheduler
kube-controller-manager
kube-scheduler 和 kube-controller-manager 能夠以集羣模式運行，經過 leader 選舉產生一個工做進程，其它進程處於阻塞模式。

3.5.1 配置 master 節點文件

cd /data/install/
 tar xf kubernetes-server-linux-amd64.tar.gz 
 cd kubernetes/server/bin/
 cp kube-scheduler kube-apiserver kube-controller-manager kubectl /cloud/k8s/kubernetes/bin/

3.5.2 配置 kubernetes相關證書

cd /data/ssl_config/kubernetes/
cp *pem /cloud/k8s/kubernetes/ssl/

3.5.3 部署 kube-apiserver 組件

建立 TLS Bootstrapping Token

# head -c 16 /dev/urandom | od -An -t x | tr -d ' '
449bbeb0ea7e50f321087a123a509a19

# vim /cloud/k8s/kubernetes/cfg/token.csv
449bbeb0ea7e50f321087a123a509a19,kubelet-bootstrap,10001,"system:kubelet-bootstrap"

建立apiserver配置文件

vim /cloud/k8s/kubernetes/cfg/kube-apiserver
KUBE_APISERVER_OPTS="--logtostderr=true \
--v=4 \
--etcd-servers=https://192.168.123.211:2379,https://192.168.123.212:2379,https://192.168.123.213:2379 \
--bind-address=192.168.123.211 \
--secure-port=6443 \
--advertise-address=192.168.123.211 \
--allow-privileged=true \
--service-cluster-ip-range=10.0.0.0/24 \
--enable-admission-plugins=NamespaceLifecycle,LimitRanger,SecurityContextDeny,ServiceAccount,ResourceQuota,NodeRestriction \
--authorization-mode=RBAC,Node \
--enable-bootstrap-token-auth \
--token-auth-file=/cloud/k8s/kubernetes/cfg/token.csv \
--service-node-port-range=30000-50000 \
--tls-cert-file=/cloud/k8s/kubernetes/ssl/server.pem  \
--tls-private-key-file=/cloud/k8s/kubernetes/ssl/server-key.pem \
--client-ca-file=/cloud/k8s/kubernetes/ssl/ca.pem \
--service-account-key-file=/cloud/k8s/kubernetes/ssl/ca-key.pem \
--etcd-cafile=/cloud/k8s/etcd/ssl/ca.pem \
--etcd-certfile=/cloud/k8s/etcd/ssl/server.pem \
--etcd-keyfile=/cloud/k8s/etcd/ssl/server-key.pem"

建立 kube-apiserver systemd unit 文件

vim  /usr/lib/systemd/system/kube-apiserver.service
[Unit]
Description=Kubernetes API Server
Documentation=https://github.com/kubernetes/kubernetes

[Service]
EnvironmentFile=/cloud/k8s/kubernetes/cfg/kube-apiserver
ExecStart=/cloud/k8s/kubernetes/bin/kube-apiserver $KUBE_APISERVER_OPTS
Restart=on-failure

[Install]
WantedBy=multi-user.target

啓動服務

systemctl daemon-reload
systemctl enable kube-apiserver
systemctl restart kube-apiserver

查看apiserver是否運行

[root@k8s-1 /data/ssl_config/kubernetes] master
# ps -ef |grep kube-apiserver
root      5475     1  2 7月30 ?       01:57:41 /cloud/k8s/kubernetes/bin/kube-apiserver --logtostderr=true --v=4 --etcd-servers=https://192.168.123.211:2379,https://192.168.123.212:2379,https://192.168.123.213:2379 --bind-address=192.168.123.211 --secure-port=6443 --advertise-address=192.168.123.211 --allow-privileged=true --service-cluster-ip-range=10.0.0.0/24 --enable-admission-plugins=NamespaceLifecycle,LimitRanger,SecurityContextDeny,ServiceAccount,ResourceQuota,NodeRestriction --authorization-mode=RBAC,Node --enable-bootstrap-token-auth --token-auth-file=/cloud/k8s/kubernetes/cfg/token.csv --service-node-port-range=30000-50000 --tls-cert-file=/cloud/k8s/kubernetes/ssl/server.pem --tls-private-key-file=/cloud/k8s/kubernetes/ssl/server-key.pem --client-ca-file=/cloud/k8s/kubernetes/ssl/ca.pem --service-account-key-file=/cloud/k8s/kubernetes/ssl/ca-key.pem --etcd-cafile=/cloud/k8s/etcd/ssl/ca.pem --etcd-certfile=/cloud/k8s/etcd/ssl/server.pem --etcd-keyfile=/cloud/k8s/etcd/ssl/server-key.pem
root      6886  2930  0 19:49 pts/0    00:00:00 grep --color=auto kube-apiserver

3.5.4 部署kube-scheduler

建立kube-scheduler配置文件

vim  /cloud/k8s/kubernetes/cfg/kube-scheduler
KUBE_SCHEDULER_OPTS="--logtostderr=true --v=4 --master=127.0.0.1:8080 --leader-elect"

--address：在 127.0.0.1:10251 端口接收 http /metrics 請求；kube-scheduler 目前還不支持接收 https 請求；
--kubeconfig：指定 kubeconfig 文件路徑，kube-scheduler 使用它鏈接和驗證 kube-apiserver；
--leader-elect=true：集羣運行模式，啓用選舉功能；被選爲 leader 的節點負責處理工做，其它節點爲阻塞狀態；

建立kube-scheduler systemd unit 文件

vim /usr/lib/systemd/system/kube-scheduler.service
[Unit]
Description=Kubernetes Scheduler
Documentation=https://github.com/kubernetes/kubernetes

[Service]
EnvironmentFile=/cloud/k8s/kubernetes/cfg/kube-scheduler
ExecStart=/cloud/k8s/kubernetes/bin/kube-scheduler $KUBE_SCHEDULER_OPTS
Restart=on-failure

[Install]
WantedBy=multi-user.target

啓動kube-scheduler服務

systemctl daemon-reload 
systemctl enable kube-scheduler.service  
systemctl restart kube-scheduler.service

查看kube-scheduler是否運行

[root@k8s-1 /data/ssl_config/kubernetes] master
#  ps -ef |grep kube-scheduler
root      7269  2930  0 19:54 pts/0    00:00:00 grep --color=auto kube-scheduler
root     13970     1  0 8月02 ?       00:01:21 /cloud/k8s/kubernetes/bin/kube-scheduler --logtostderr=true --v=4 --master=127.0.0.1:8080 --leader-elect

[root@k8s-1 /data/ssl_config/kubernetes] master
# systemctl status kube-scheduler
● kube-scheduler.service - Kubernetes Scheduler
   Loaded: loaded (/usr/lib/systemd/system/kube-scheduler.service; enabled; vendor preset: disabled)
   Active: active (running) since 五 2019-08-02 18:33:11 CST; 1 day 1h ago
     Docs: https://github.com/kubernetes/kubernetes
 Main PID: 13970 (kube-scheduler)
    Tasks: 10
   Memory: 19.1M
   CGroup: /system.slice/kube-scheduler.service
           └─13970 /cloud/k8s/kubernetes/bin/kube-scheduler --logtostderr=tru...

8月 03 19:46:52 k8s-1 kube-scheduler[13970]: I0803 19:46:52.580662   13970 ...d
8月 03 19:47:03 k8s-1 kube-scheduler[13970]: I0803 19:47:03.578985   13970 ...d
8月 03 19:47:03 k8s-1 kube-scheduler[13970]: I0803 19:47:03.583437   13970 ...d
8月 03 19:48:31 k8s-1 kube-scheduler[13970]: I0803 19:48:31.637472   13970 ...d
8月 03 19:48:48 k8s-1 kube-scheduler[13970]: I0803 19:48:48.617124   13970 ...d
8月 03 19:50:00 k8s-1 kube-scheduler[13970]: I0803 19:50:00.589103   13970 ...d
8月 03 19:50:18 k8s-1 kube-scheduler[13970]: I0803 19:50:18.616574   13970 ...d
8月 03 19:52:15 k8s-1 kube-scheduler[13970]: I0803 19:52:15.629976   13970 ...d
8月 03 19:52:45 k8s-1 kube-scheduler[13970]: I0803 19:52:45.580103   13970 ...d
8月 03 19:53:56 k8s-1 kube-scheduler[13970]: I0803 19:53:56.601687   13970 ...d
Hint: Some lines were ellipsized, use -l to show in full.

3.5.5 部署kube-controller-manager

建立kube-controller-manager配置文件

vim  /cloud/k8s/kubernetes/cfg/kube-controller-manager
KUBE_CONTROLLER_MANAGER_OPTS="--logtostderr=true \
--v=4 \
--master=127.0.0.1:8080 \
--leader-elect=true \
--address=127.0.0.1 \
--service-cluster-ip-range=10.0.0.0/24 \
--cluster-name=kubernetes \
--cluster-signing-cert-file=/cloud/k8s/kubernetes/ssl/ca.pem \
--cluster-signing-key-file=/cloud/k8s/kubernetes/ssl/ca-key.pem  \
--root-ca-file=/cloud/k8s/kubernetes/ssl/ca.pem \
--service-account-private-key-file=/cloud/k8s/kubernetes/ssl/ca-key.pem"

建立kube-controller-manager systemd unit 文件

vim  /usr/lib/systemd/system/kube-controller-manager.service
[Unit]
Description=Kubernetes Controller Manager
Documentation=https://github.com/kubernetes/kubernetes

[Service]
EnvironmentFile=/cloud/k8s/kubernetes/cfg/kube-controller-manager
ExecStart=/cloud/k8s/kubernetes/bin/kube-controller-manager $KUBE_CONTROLLER_MANAGER_OPTS
Restart=on-failure

[Install]
WantedBy=multi-user.target

啓動服務

systemctl daemon-reload
systemctl enable kube-controller-manager
systemctl restart kube-controller-manager

查看kube-controller-manager是否運行

[root@k8s-1 /data/ssl_config/kubernetes] master
# ps -ef |grep kube-controller-manager
root      7759  2930  0 19:59 pts/0    00:00:00 grep --color=auto kube-controller-manager
root     13972     1  0 8月02 ?       00:10:56 /cloud/k8s/kubernetes/bin/kube-controller-manager --logtostderr=true --v=4 --master=127.0.0.1:8080 --leader-elect=true --address=127.0.0.1 --service-cluster-ip-range=10.0.0.0/24 --cluster-name=kubernetes --cluster-signing-cert-file=/cloud/k8s/kubernetes/ssl/ca.pem --cluster-signing-key-file=/cloud/k8s/kubernetes/ssl/ca-key.pem --root-ca-file=/cloud/k8s/kubernetes/ssl/ca.pem --service-account-private-key-file=/cloud/k8s/kubernetes/ssl/ca-key.pem

[root@k8s-1 /data/ssl_config/kubernetes] master
#  systemctl status kube-controller-manager
● kube-controller-manager.service - Kubernetes Controller Manager
   Loaded: loaded (/usr/lib/systemd/system/kube-controller-manager.service; enabled; vendor preset: disabled)
   Active: active (running) since 五 2019-08-02 18:33:13 CST; 1 day 1h ago
     Docs: https://github.com/kubernetes/kubernetes
 Main PID: 13972 (kube-controller)
    Tasks: 10
   Memory: 51.9M
   CGroup: /system.slice/kube-controller-manager.service
           └─13972 /cloud/k8s/kubernetes/bin/kube-controller-manager --logtos...

8月 03 19:59:48 k8s-1 kube-controller-manager[13972]: I0803 19:59:48.522342 ...
8月 03 19:59:48 k8s-1 kube-controller-manager[13972]: I0803 19:59:48.526381 ...
8月 03 19:59:50 k8s-1 kube-controller-manager[13972]: I0803 19:59:50.211112 ...
8月 03 19:59:50 k8s-1 kube-controller-manager[13972]: I0803 19:59:50.455555 ...
8月 03 19:59:50 k8s-1 kube-controller-manager[13972]: I0803 19:59:50.738397 ...
8月 03 19:59:50 k8s-1 kube-controller-manager[13972]: I0803 19:59:50.767332 ...
8月 03 19:59:51 k8s-1 kube-controller-manager[13972]: I0803 19:59:51.502835 ...
8月 03 19:59:53 k8s-1 kube-controller-manager[13972]: I0803 19:59:53.567923 ...
8月 03 19:59:53 k8s-1 kube-controller-manager[13972]: I0803 19:59:53.567955 ...
8月 03 19:59:54 k8s-1 kube-controller-manager[13972]: I0803 19:59:54.321341 ...
Hint: Some lines were ellipsized, use -l to show in full.

3.5.6 查看master集羣狀態

[root@k8s-1 /root] master
# kubectl get cs,nodes
NAME                                 STATUS    MESSAGE             ERROR
componentstatus/controller-manager   Healthy   ok
componentstatus/scheduler            Healthy   ok
componentstatus/etcd-2               Healthy   {"health":"true"}
componentstatus/etcd-1               Healthy   {"health":"true"}
componentstatus/etcd-0               Healthy   {"health":"true"}

3.6 部署node 節點

kubernetes work 節點運行以下組件：
docker
kubelet
kube-proxy

3.6.1 部署 kubelet 組件

kublet 運行在每一個 worker 節點上，接收 kube-apiserver 發送的請求，管理 Pod 容器，執行交互式命令，如exec、run、logs 等;
kublet 啓動時自動向 kube-apiserver 註冊節點信息，內置的 cadvisor 統計和監控節點的資源使用狀況;
爲確保安全，本文檔只開啓接收 https 請求的安全端口，對請求進行認證和受權，拒絕未受權的訪問(如apiserver、heapster)。

配置node節點

cd /data/install/kubernetes/server/bin/
scp kubelet kube-proxy k8s-2:/cloud/k8s/kubernetes/bin/
scp kubelet kube-proxy k8s-3:/cloud/k8s/kubernetes/bin/

建立 kubelet bootstrap.kubeconfig 文件

cd /data/ssl_config/kubernetes/
vim environment.sh
# 建立kubelet bootstrapping kubeconfig
BOOTSTRAP_TOKEN=449bbeb0ea7e50f321087a123a509a19
KUBE_APISERVER="https://192.168.123.211:6443"
# 設置集羣參數
kubectl config set-cluster kubernetes \
  --certificate-authority=./ca.pem \
  --embed-certs=true \
  --server=${KUBE_APISERVER} \
  --kubeconfig=bootstrap.kubeconfig

# 設置客戶端認證參數
kubectl config set-credentials kubelet-bootstrap \
  --token=${BOOTSTRAP_TOKEN} \
  --kubeconfig=bootstrap.kubeconfig

# 設置上下文參數
kubectl config set-context default \
  --cluster=kubernetes \
  --user=kubelet-bootstrap \
  --kubeconfig=bootstrap.kubeconfig

# 設置默認上下文
kubectl config use-context default --kubeconfig=bootstrap.kubeconfig

經過 bash environment.sh獲取 bootstrap.kubeconfig 配置文件。

建立 kubelet.kubeconfig 文件

vim envkubelet.kubeconfig.sh
# 建立kubelet bootstrapping kubeconfig
BOOTSTRAP_TOKEN=449bbeb0ea7e50f321087a123a509a19
KUBE_APISERVER="https://192.168.123.211:6443"

# 設置集羣參數
kubectl config set-cluster kubernetes \
  --certificate-authority=./ca.pem \
  --embed-certs=true \
  --server=${KUBE_APISERVER} \
  --kubeconfig=kubelet.kubeconfig

# 設置客戶端認證參數
kubectl config set-credentials kubelet \
  --token=${BOOTSTRAP_TOKEN} \
  --kubeconfig=kubelet.kubeconfig

# 設置上下文參數
kubectl config set-context default \
  --cluster=kubernetes \
  --user=kubelet \
  --kubeconfig=kubelet.kubeconfig

# 設置默認上下文
kubectl config use-context default --kubeconfig=kubelet.kubeconfig

建立kube-proxy kubeconfig文件

vim  env_proxy.sh
# 建立kube-proxy kubeconfig文件

BOOTSTRAP_TOKEN=449bbeb0ea7e50f321087a123a509a19
KUBE_APISERVER="https://192.168.123.211:6443"

kubectl config set-cluster kubernetes \
  --certificate-authority=./ca.pem \
  --embed-certs=true \
  --server=${KUBE_APISERVER} \
  --kubeconfig=kube-proxy.kubeconfig

kubectl config set-credentials kube-proxy \
  --client-certificate=./kube-proxy.pem \
  --client-key=./kube-proxy-key.pem \
  --embed-certs=true \
  --kubeconfig=kube-proxy.kubeconfig

kubectl config set-context default \
  --cluster=kubernetes \
  --user=kube-proxy \
  --kubeconfig=kube-proxy.kubeconfig

kubectl config use-context default --kubeconfig=kube-proxy.kubeconfig

將bootstrap kubeconfig kube-proxy.kubeconfig 文件拷貝到全部 nodes節點

scp -rp bootstrap.kubeconfig kube-proxy.kubeconfig k8s-2:/cloud/k8s/kubernetes/cfg/
scp -rp bootstrap.kubeconfig kube-proxy.kubeconfig k8s-3:/cloud/k8s/kubernetes/cfg/

3.6.2 建立kubelet 參數配置文件拷貝到全部 nodes節點

建立 kubelet 參數配置模板文件

[root@k8s-2 /root] node
# cat /cloud/k8s/kubernetes/cfg/kubelet.config
kind: KubeletConfiguration
apiVersion: kubelet.config.k8s.io/v1beta1
address: 192.168.123.212
port: 10250
readOnlyPort: 10255
cgroupDriver: cgroupfs
clusterDomain: cluster.local.
failSwapOn: false
authentication:
  anonymous:
    enabled: true

建立kubelet配置文件

vim  /cloud/k8s/kubernetes/cfg/kubelet
KUBELET_OPTS="--logtostderr=true \
--v=4 \
--hostname-override=k8s-2 \
--kubeconfig=/cloud/k8s/kubernetes/cfg/kubelet.kubeconfig \
--bootstrap-kubeconfig=/cloud/k8s/kubernetes/cfg/bootstrap.kubeconfig \
--config=/cloud/k8s/kubernetes/cfg/kubelet.config \
--cert-dir=/cloud/k8s/kubernetes/ssl \
--pod-infra-container-image=registry.cn-hangzhou.aliyuncs.com/google-containers/pause-amd64:3.0"

建立kubelet systemd unit 文件

vim /usr/lib/systemd/system/kubelet.service
[Unit]
Description=Kubernetes Kubelet
After=docker.service
Requires=docker.service

[Service]
EnvironmentFile=/cloud/k8s/kubernetes/cfg/kubelet
ExecStart=/cloud/k8s/kubernetes/bin/kubelet $KUBELET_OPTS
Restart=on-failure
KillMode=process

[Install]
WantedBy=multi-user.target

將kubelet-bootstrap用戶綁定到系統集羣角色

kubectl create clusterrolebinding kubelet-bootstrap \
  --clusterrole=system:node-bootstrapper \
  --user=kubelet-bootstrap

3.6.3 啓動kubelet服務

systemctl daemon-reload
systemctl enable kubelet
systemctl restart kubelet

3.6.4 approve kubelet CSR 請求

kubectl get csr
kubectl certificate approve $NAME 
kubectl get csr
csr 狀態變爲 Approved,Issued 便可

Requesting User：請求 CSR 的用戶，kube-apiserver 對它進行認證和受權；

Subject：請求籤名的證書信息；

證書的 CN 是 system:node:kube-node2， Organization 是 system:nodes，kube-apiserver 的 Node 受權模式會授予該證書的相關權限；

3.6.5 查看集羣狀態

[root@k8s-1 /root] master
# kubectl  get  nodes,cs
NAME         STATUS   ROLES   AGE     VERSION
node/k8s-2   Ready    node    3d22h   v1.15.1
node/k8s-3   Ready    node    3d22h   v1.15.1

NAME                                 STATUS    MESSAGE             ERROR
componentstatus/scheduler            Healthy   ok
componentstatus/controller-manager   Healthy   ok
componentstatus/etcd-0               Healthy   {"health":"true"}
componentstatus/etcd-2               Healthy   {"health":"true"}
componentstatus/etcd-1               Healthy   {"health":"true"}

3.7 部署 node kube-proxy 組件

kube-proxy 運行在全部 node節點上，它監聽 apiserver 中 service 和 Endpoint 的變化狀況，建立路由規則來進行服務負載均衡。

3.7.1 建立kube-proxy配置文件

vim  /cloud/k8s/kubernetes/cfg/kube-proxy
KUBE_PROXY_OPTS="--logtostderr=true \
--v=4 \
--hostname-override=k8s-2 \
--cluster-cidr=10.0.0.0/24 \
--kubeconfig=/cloud/k8s/kubernetes/cfg/kube-proxy.kubeconfig"

3.7.2 建立kube-proxy systemd unit 文件

vim /usr/lib/systemd/system/kube-proxy.service
[Unit]
Description=Kubernetes Proxy
After=network.target

[Service]
EnvironmentFile=/cloud/k8s/kubernetes/cfg/kube-proxy
ExecStart=/cloud/k8s/kubernetes/bin/kube-proxy $KUBE_PROXY_OPTS
Restart=on-failure

[Install]
WantedBy=multi-user.target

3.7.3 啓動kube-proxy服務

systemctl daemon-reload
systemctl enable kube-proxy
systemctl restart kube-proxy

3.7.4 檢查服務運行狀態

[root@k8s-2 /root] node
#  systemctl status kube-proxy
● kube-proxy.service - Kubernetes Proxy
   Loaded: loaded (/usr/lib/systemd/system/kube-proxy.service; enabled; vendor preset: disabled)
   Active: active (running) since 二 2019-07-30 22:30:04 CST; 3 days ago
 Main PID: 5764 (kube-proxy)
    Tasks: 0
   Memory: 11.8M
   CGroup: /system.slice/kube-proxy.service
           ‣ 5764 /cloud/k8s/kubernetes/bin/kube-proxy --logtostderr=true --v...

8月 03 20:51:33 k8s-2 kube-proxy[5764]: I0803 20:51:33.736946    5764 iptab...]
8月 03 20:51:33 k8s-2 kube-proxy[5764]: I0803 20:51:33.740738    5764 healt..."
8月 03 20:51:33 k8s-2 kube-proxy[5764]: I0803 20:51:33.740762    5764 proxi...s
8月 03 20:51:33 k8s-2 kube-proxy[5764]: I0803 20:51:33.740780    5764 bound...s
8月 03 20:51:34 k8s-2 kube-proxy[5764]: I0803 20:51:34.018700    5764 confi...e
8月 03 20:51:34 k8s-2 kube-proxy[5764]: I0803 20:51:34.028396    5764 confi...e
8月 03 20:51:36 k8s-2 kube-proxy[5764]: I0803 20:51:36.035812    5764 confi...e
8月 03 20:51:36 k8s-2 kube-proxy[5764]: I0803 20:51:36.046563    5764 confi...e
8月 03 20:51:38 k8s-2 kube-proxy[5764]: I0803 20:51:38.045395    5764 confi...e
8月 03 20:51:38 k8s-2 kube-proxy[5764]: I0803 20:51:38.061197    5764 confi...e
Hint: Some lines were ellipsized, use -l to show in full.

至此 kubernetes 1.15 版本簡單部署完成~[未完待續]