二進制部署kubernetes集羣（上篇）

時間  2019-12-18
標籤 二進制 部署 kubernetes 集羣 上篇 欄目 負載均衡 简体版
原文   原文鏈接

1.實驗架構

1.1.硬件環境

準備5臺2c/2g/50g虛擬機，使用10.4.7.0/24 網絡 。//因後期要直接向k8s交付java服務，所以運算節點須要4c8g。不交付服務，所有2c2g足夠。javascript

1.2.軟件環境

操做系統：預裝CentOS7.6操做系統。//因docker完美支持對內核有需求，全部操做系統所有CentOS 7.x（須要內核3.8以上）
作好系統基礎優化。
關閉selinux，關閉firewalld服務
時間同步（chronyd）
調整Base源，Epel源
內核優化（文件描述符大小，內核轉發，等等）css

1.3.IP及架構規劃

主機名 角色 ip 部署服務與組件 硬件配置
hdss7-11.host.com k8s proxy 主 10.4.7.11 bind九、nginx（L4）、keepalived、supervisor 2C 2G 50G
hdss7-12.host.com k8s proxy 備 10.4.7.12 etcd、nginx（L4）、keepalived、supervisor 2C 2G 50G
hdss7-21.host.com k8s 運算節點1 10.4.7.21 etcd、kube-apiserver、kube-controller-manager、kube-scheduler kube-kubelet、kube-proxy，supervisor 4C 8G 50G
hdss7-22.host.com k8s 元算節點2 10.4.7.22 etcd、kube-apiserver、kube-controller-manager、kube-scheduler、kube-kubelet、kube-proxy，supervisor 4C 8G 50G
hdss7-200.host.com k8s 運維節點，docker倉庫 10.4.7.200 docker 私有倉庫、資源配置清單倉庫、提供共享存儲（NFS）、簽發證書 2C 2G 50G

2.基礎環境準備及網絡設置

2.1.網絡設置

2.1.1.VM虛擬網絡編輯器設置

2.1.2.Windows網卡設置

2.2.虛擬機操做系統設置

2.2.1.設置主機名

~]# hostnamectl set-hostname hdss7-xx.host.com

2.2.2.關閉防火牆和selinux

~]# systemctl stop firewalld
~]# systemctl disable firewalld
~]# setenforce 0
~]# sed –i ‘s/SELINUX=enforcing/SELINUX=disabled/g’ /etc/selinux/config

2.2.3.設置網卡

~]# cat /etc/sysconfig/network-scripts/ifcfg-eth0 
TYPE=Ethernet
BOOTPROTO=none
NAME=eth0
DEVICE=eth0
ONBOOT=yes
IPADDR=10.4.7.xx
NETMASK=255.255.255.0
GATEWAY=10.4.7.254
DNS1=10.4.7.xx

2.2.4.設置yum源

~]# yum install epel-release
或者
~]# wget -O /etc/yum.repos.d/CentOS-Base.repo  http://mirrors.aliyun.com/repo/Centos-7.repo
~]# wget -O /etc/yum.repos.d/epel.repo  http://mirrors.aliyun.com/repo/epel-7.repo
~]# yum clean all
~]# yum makecache

2.2.5.安裝經常使用工具

~]# yum install wget net-tools telnet tree nmap sysstat lrzsz dos2unix bind-utils -y

2.3安裝bind服務

proxy主節點hdss7-11.host.com 上html

2.3.1.安裝bind 9

~]# yum install bind -y

2.3.2.配置bind 9

//主配置文件
~]# vi /etc/named.conf
listen-on port 53 { 10.4.7.11; }; 
allow-query     { any; };
forwarders      { 10.4.7.254; };
recursion yes;
dnssec-enable no;
dnssec-validation no

##########參數說明#########
* dnssec-enable yes; ----> dnssec-enable no; # 是否支持DNSSEC開關 PS：dnssec做用：1.爲DNS數據提供來源驗證 2.爲數據提供完整性性驗證 3.爲查詢提供否認存在驗證
* dnssec-validation yes; ----> dnssec-validation no; #是否進行DNSSEC確認開關
* forwarders      { 10.4.7.1; }; #用來指定上一層DNS地址，通常指定網關，確保服務可以訪問公網
* listen-on-v6 port 53 { ::1; }; 若是不用IPV6，能夠刪除
*recursion 遞歸查詢
#########################

~]# named-checkconf

//區域配置文件
~]# vi /etc/named.rfc1912.zones
zone "host.com" IN {
        type  master;
        file  "host.com.zone";
        allow-update { 10.4.7.11; };
};

zone "od.com" IN {
        type  master;
        file  "od.com.zone";
        allow-update { 10.4.7.11; };
};

//配置區域數據文件
    1.配置主機域數據文件
~]# vi  /var/named/host.com.zone
$ORIGIN host.com.
$TTL 600    ; 10 minutes
@       IN SOA  dns.host.com. dnsadmin.host.com. (
                2019111001 ; serial
                10800      ; refresh (3 hours)
                900        ; retry (15 minutes)
                604800     ; expire (1 week)
                86400      ; minimum (1 day)
                )
            NS   dns.host.com.
$TTL 60 ; 1 minute
dns                A    10.4.7.11
HDSS7-11           A    10.4.7.11
HDSS7-12           A    10.4.7.12
HDSS7-21           A    10.4.7.21
HDSS7-22           A    10.4.7.22
HDSS7-200          A    10.4.7.200  
    2.配置業務域數據文件
~]# vi  /var/named/od.com.zone
$ORIGIN od.com.
$TTL 600    ; 10 minutes
@           IN SOA  dns.od.com. dnsadmin.od.com. (
                2019111001 ; serial
                10800      ; refresh (3 hours)
                900        ; retry (15 minutes)
                604800     ; expire (1 week)
                86400      ; minimum (1 day)
                )
                NS   dns.od.com.
$TTL 60 ; 1 minute
dns                A    10.4.7.11

2.3.3.檢查配置並啓動bind 9

~]# named-checkconf
~]# systemctl start named
~]# netstat -nltup|grep 53
tcp        0      0 10.4.7.11:53            0.0.0.0:*               LISTEN      18279/named         
tcp        0      0 127.0.0.1:953           0.0.0.0:*               LISTEN      18279/named         
tcp6       0      0 :::53                   :::*                    LISTEN      18279/named         
tcp6       0      0 ::1:953                 :::*                    LISTEN      18279/named         
udp        0      0 10.4.7.11:53            0.0.0.0:*                           18279/named         
udp6       0      0 :::53                   :::*                                18279/named

2.3.4.檢查

[root@hdss7-11 ~]# dig -t A hdss7-21.host.com @10.4.7.11 +short
10.4.7.21
[root@hdss7-11 ~]# dig -t A hdss7-200.host.com @10.4.7.11  +short
10.4.7.200
[root@hdss7-11 ~]# dig -t A hdss7-11.host.com @10.4.7.11  +short
10.4.7.11
[root@hdss7-11 ~]# dig -t A dns.od.com @10.4.7.11  +short
10.4.7.11

2.3.5.配置DNS客戶端

linux主機全部
[root@hdss7-11 ~]# vi /etc/resolv.conf 
# Generated by NetworkManager
search host.com
nameserver 10.4.7.11

~] systemctl restart network 五臺都設置重啓
windows主機
更改適配器設置  --》 屬性 --》ipv4 --》更改dns 
自動躍點 10 優先從vmnet 8出網

2.3.6.檢查

~]# ping hdss7-200.host.com
~]# ping dns.od.com
##若windows ping不到，把本地網卡dns設置成10.4.7.11

2.4.準備簽發證書環境

運維主機hdss7-200.host.com 上java

2.4.1.安裝CFSSL

證書籤發工具CFSSL：R1.2node

HDSS7-200上:
~]# wget https://pkg.cfssl.org/R1.2/cfssl_linux-amd64 -O /usr/bin/cfssl          //cfssl下載地址
~]# wget https://pkg.cfssl.org/R1.2/cfssljson_linux-amd64 -O /usr/bin/cfssl-json    //cfssl-json下載地址
~]# wget https://pkg.cfssl.org/R1.2/cfssl-certinfo_linux-amd64 -O /usr/bin/cfssl-certinfo     //cfssl-certinfo下載地址
~]# chmod +x /usr/bin/cfssl*

2.4.2.建立生成CA證書籤名請求（csr）的json配置文件

vi  /opt/certs/ca-csr.json
{
    "CN": "OldboyEdu",
    "hosts": [
    ],
    "key": {
        "algo": "rsa",
        "size": 2048
    },
    "names": [
        {
            "C": "CN",
            "ST": "beijing",
            "L": "beijing",
            "O": "od",
            "OU": "ops"
        }
    ],
    "ca": {
        "expiry": "175200h"
    }
}

##############配置說明###########
CN：Common Name，瀏覽器使用該字段驗證網站是否合法，通常寫的是域名，很重要，瀏覽器使用該字段驗證網站是否合法
C：Country 國家
ST：State 州，省
L：Locality 地區，城市
O：Organization Name 組織名稱，公司名稱
OU：Organization Unit Name 組織單位名稱，部門

2.4.3.生成CA證書和私鑰

mkdir /opt/certs
cd /opt/certs
certs]#  cfssl gencert -initca ca-csr.json | cfssl-json -bare ca
certs]# ll
ca.csr  
ca-csr.json  
ca-key.pem                                 //根證書的私鑰  
ca.pem                                      //根證書
##########
ca.pem     //根證書
ca-key.pem:

2.5.部署docker環境

hdss7-200.host.com
hdss7-21.host.com
hdss7-22.host.com上linux

2.5.1.安裝

[root@hdss7-21 ~]# curl -fsSL https://get.docker.com | bash -s docker --mirror Aliyun
# Executing docker install script, commit: f45d7c11389849ff46a6b4d94e0dd1ffebca32c1
+ sh -c 'yum install -y -q yum-utils'
+ sh -c 'yum-config-manager --add-repo https://mirrors.aliyun.com/docker-ce/linux/centos/docker-ce.repo'
Loaded plugins: fastestmirror
adding repo from: https://mirrors.aliyun.com/docker-ce/linux/centos/docker-ce.repo
grabbing file https://mirrors.aliyun.com/docker-ce/linux/centos/docker-ce.repo to /etc/yum.repos.d/docker-ce.repo
repo saved to /etc/yum.repos.d/docker-ce.repo
+ '[' stable '!=' stable ']'
+ sh -c 'yum makecache'
Loaded plugins: fastestmirror
Loading mirror speeds from cached hostfile
 * base: mirrors.aliyun.com
 * extras: mirrors.aliyun.com
 * updates: mirrors.aliyun.com
base                                                                                                   | 3.6 kB  00:00:00     
docker-ce-stable                                                                                       | 3.5 kB  00:00:00     
epel                                                                                                   | 5.4 kB  00:00:00     
extras                                                                                                 | 2.9 kB  00:00:00     
updates                                                                                                | 2.9 kB  00:00:00     
(1/14): docker-ce-stable/x86_64/updateinfo                                                             |   55 B  00:00:00     
(2/14): docker-ce-stable/x86_64/filelists_db                                                           |  18 kB  00:00:00     
(3/14): docker-ce-stable/x86_64/primary_db                                                             |  37 kB  00:00:00     
(4/14): docker-ce-stable/x86_64/other_db                                                               | 111 kB  00:00:00     
(5/14): epel/x86_64/prestodelta                                                                        | 4.0 kB  00:00:00     
(6/14): base/7/x86_64/other_db                                                                         | 2.6 MB  00:00:01     
(7/14): epel/x86_64/other_db                                                                           | 3.3 MB  00:00:02     
(8/14): extras/7/x86_64/other_db                                                                       | 100 kB  00:00:00     
(9/14): extras/7/x86_64/filelists_db                                                                   | 207 kB  00:00:00     
(10/14): updates/7/x86_64/other_db                                                                     | 243 kB  00:00:00     
(11/14): epel/x86_64/updateinfo_zck                                                                    | 1.5 MB  00:00:01     
(12/14): updates/7/x86_64/filelists_db                                                                 | 2.1 MB  00:00:01     
(13/14): base/7/x86_64/filelists_db                                                                    | 7.3 MB  00:00:04     
(14/14): epel/x86_64/filelists_db                                                                      |  12 MB  00:00:05     
Metadata Cache Created
+ '[' -n '' ']'
+ sh -c 'yum install -y -q docker-ce'
warning: /var/cache/yum/x86_64/7/docker-ce-stable/packages/docker-ce-19.03.5-3.el7.x86_64.rpm: Header V4 RSA/SHA512 Signature, key ID 621e9f35: NOKEY
Public key for docker-ce-19.03.5-3.el7.x86_64.rpm is not installed
Importing GPG key 0x621E9F35:
 Userid     : "Docker Release (CE rpm) <docker@docker.com>"
 Fingerprint: 060a 61c5 1b55 8a7f 742b 77aa c52f eb6b 621e 9f35
 From       : https://mirrors.aliyun.com/docker-ce/linux/centos/gpg
setsebool:  SELinux is disabled.
If you would like to use Docker as a non-root user, you should now consider
adding your user to the "docker" group with something like:

  sudo usermod -aG docker your-user

Remember that you will have to log out and back in for this to take effect!

WARNING: Adding a user to the "docker" group will grant the ability to run
         containers which can be used to obtain root privileges on the
         docker host.
         Refer to https://docs.docker.com/engine/security/security/#docker-daemon-attack-surface
         for more information.

報錯：
nginx

解決：git

rm -f  /etc/yum.repos.d/local.repo   再從新安裝

2.5.2.配置

mkdir  /etc/docker
vi  /etc/docker/daemon.json
{
  "graph": "/data/docker",
  "storage-driver": "overlay2",
  "insecure-registries": ["registry.access.redhat.com","quay.io","harbor.od.com"],
  "registry-mirrors": ["https://q2gr04ke.mirror.aliyuncs.com"],
  "bip": "172.7.21.1/24",
  "exec-opts": ["native.cgroupdriver=systemd"],
  "live-restore": true
}
############配置說明###############
bip要根據宿主機ip變化 
注意：hdss7-21.host.com   bip 172.7.21.1/24
           hdss7-22.host.com   bip 172.7.22.1/24
           hdss7-200.host.com bip 172.7.200.1/24
#################################

2.5.3.啓動

docker]# mkdir -p /data/docker
docker]# systemctl start docker
docker]# systemctl enable docker
docker]# docker --version
Docker version 19.03.4, build 9013bf583a
[root@hdss7-200 docker]# docker version
Client: Docker Engine - Community
 Version:           19.03.4
 API version:       1.40
 Go version:        go1.12.10
 Git commit:        9013bf583a
 Built:             Fri Oct 18 15:52:22 2019
 OS/Arch:           linux/amd64
 Experimental:      false

Server: Docker Engine - Community
 Engine:
  Version:          19.03.5
  API version:      1.40 (minimum version 1.12)
  Go version:       go1.12.12
  Git commit:       633a0ea
  Built:            Wed Nov 13 07:24:18 2019
  OS/Arch:          linux/amd64
  Experimental:     false
 containerd:
  Version:          1.2.10
  GitCommit:        b34a5c8af56e510852c35414db4c1f4fa6172339
 runc:
  Version:          1.0.0-rc8+dev
  GitCommit:        3e425f80a8c931f88e6d94a8c831b9d5aa481657
 docker-init:
  Version:          0.18.0
  GitCommit:        fec3683

2.6.部署docker鏡像私有倉庫harbor

運維主機hdss7-200.host.com 上github

2.6.1.下載軟件二進制包並解壓

強烈建議下載1.7.5以上版本
harbor官網github地址
https://github.com/goharbor/harbor

src]# tar xf harbor-offline-installer-v1.8.3.tgz -C /opt/
opt]# mv harbor/ harbor-v1.8.3
opt]# ln -s /opt/harbor-v1.8.3/ /opt/harbor

2.6.2.配置

[root@hdss7-200 opt]# vi /opt/harbor/harbor.yml
hostname: harbor.od.com
http:
  port: 180
 harbor_admin_password:Harbor12345
data_volume: /data/harbor
log:
    level:  info
    rotate_count:  50
    rotate_size:200M
    location: /data/harbor/logs

[root@hdss7-200 opt]# mkdir -p /data/harbor/logs

2.6.3.安裝docker-compose

[root@hdss7-200 opt]# yum install docker-compose -y
Loaded plugins: fastestmirror
Loading mirror speeds from cached hostfile
 * base: mirrors.aliyun.com
 * extras: mirrors.aliyun.com
 * updates: mirrors.aliyun.com
Package docker-compose-1.18.0-4.el7.noarch already installed and latest version
Nothing to do

2.6.4.安裝harbor

[root@hdss7-200 harbor]# ./install.sh 

[Step 0]: checking installation environment ...

Note: docker version: 19.03.4

Note: docker-compose version: 1.18.0
................
Creating harbor-portal ... done
Creating nginx ... done
Creating registry ... 
Creating registryctl ... 
Creating harbor-db ... 
Creating redis ... 
Creating harbor-core ... 
Creating harbor-portal ... 
Creating harbor-jobservice ... 
Creating nginx ... 

?.----Harbor has been installed and started successfully.----

Now you should be able to visit the admin portal at http://harbor.od.com. 
For more details, please visit https://github.com/goharbor/harbor .

2.6.5.檢查harbor啓動狀況

[root@hdss7-200 harbor]# docker-compose ps                     //docker給起了一堆容器，單機編排
      Name                     Command               State             Ports          
--------------------------------------------------------------------------------------
harbor-core         /harbor/start.sh                 Up                               
harbor-db           /entrypoint.sh postgres          Up      5432/tcp                 
harbor-jobservice   /harbor/start.sh                 Up                               
harbor-log          /bin/sh -c /usr/local/bin/ ...   Up      127.0.0.1:1514->10514/tcp
harbor-portal       nginx -g daemon off;             Up      80/tcp                   
nginx               nginx -g daemon off;             Up      0.0.0.0:180->80/tcp      
redis               docker-entrypoint.sh redis ...   Up      6379/tcp                 
registry            /entrypoint.sh /etc/regist ...   Up      5000/tcp   


[root@hdss7-200 harbor]# docker ps -a                               //能夠看到180映射到本機80port                     
CONTAINER ID        IMAGE                                               COMMAND                  CREATED             STATUS                   PORTS                       NAMES
d6880cca7143        goharbor/nginx-photon:v1.8.3                        "nginx -g 'daemon of??   3 minutes ago       Up 3 minutes (healthy)   0.0.0.0:180->80/tcp         nginx
a5d166ffb68e        goharbor/harbor-jobservice:v1.8.3                   "/harbor/start.sh"       3 minutes ago       Up 3 minutes                                         harbor-jobservice
e0ab65359cc4        goharbor/harbor-portal:v1.8.3                       "nginx -g 'daemon of??   3 minutes ago       Up 3 minutes (healthy)   80/tcp                      harbor-portal
ef032bf896c0        goharbor/harbor-core:v1.8.3                         "/harbor/start.sh"       3 minutes ago       Up 3 minutes (healthy)                               harbor-core
6c334c42ac9d        goharbor/redis-photon:v1.8.3                        "docker-entrypoint.s??   3 minutes ago       Up 3 minutes             6379/tcp                    redis
257f4c4ef4d7        goharbor/harbor-db:v1.8.3                           "/entrypoint.sh post??   3 minutes ago       Up 3 minutes (healthy)   5432/tcp                    harbor-db
7e741324bb39        goharbor/registry-photon:v2.7.1-patch-2819-v1.8.3   "/entrypoint.sh /etc??   3 minutes ago       Up 3 minutes (healthy)   5000/tcp                    registry
a468bf625584        goharbor/harbor-registryctl:v1.8.3                  "/harbor/start.sh"       3 minutes ago       Up 3 minutes (healthy)                               registryctl
41a1e79fc5d1        goharbor/harbor-log:v1.8.3                          "/bin/sh -c /usr/loc??   3 minutes ago       Up 3 minutes (healthy)   127.0.0.1:1514->10514/tcp   harbor-log

2.6.6.配置harbor的dns內網解析

[root@hdss7-11 ~]# vi /var/named/od.com.zone
2019111002 ; serial
harbor             A    10.4.7.200
//注意serial前滾一個序號

[root@hdss7-11 ~]# systemctl restart named
[root@hdss7-11 ~]# dig -t A harbor.od.com +short
10.4.7.200

2.6.7.安裝nginx並配置

[root@hdss7-200 harbor]# yum install nginx
[root@hdss7-200 harbor]# vi /etc/nginx/conf.d/harbor.od.com.conf
server {
    listen       80;
    server_name  harbor.od.com;

    client_max_body_size 1000m;

    location / {
        proxy_pass http://127.0.0.1:180;
    }
}
[root@hdss7-200 harbor]# systemctl start nginx
[root@hdss7-200 harbor]# systemctl enable nginx
Created symlink from /etc/systemd/system/multi-user.target.wants/nginx.service to /usr/lib/systemd/system/nginx.service.

2.6.8.瀏覽器打開http：//harbor.od.com

[root@hdss7-11 ~]# curl harbor.od.com
<!doctype html>
<html>

<head>
    <meta charset="utf-8">
    <title>Harbor</title>
    <base href="/">
    <meta name="viewport" content="width=device-width, initial-scale=1">
    <link rel="icon" type="image/x-icon" href="favicon.ico?v=2">
<link rel="stylesheet" href="styles.c1fdd265f24063370a49.css"></head>

<body>
    <harbor-app>
        <div class="spinner spinner-lg app-loading">
            Loading...
        </div>
    </harbor-app>
<script type="text/javascript" src="runtime.26209474bfa8dc87a77c.js"></script><script type="text/javascript" src="scripts.c04548c4e6d1db502313.js"></script><script type="text/javascript" src="main.144e8ccd474a28572e81.js"></script></body>

一、瀏覽器輸入：harbor.od.com 用戶名：admin 密碼：Harbor12345

二、新建項目

三、下載測試鏡像並打給鏡像打一個tagweb

[root@hdss7-200 harbor]# docker pull nginx:1.7.9
1.7.9: Pulling from library/nginx
Image docker.io/library/nginx:1.7.9 uses outdated schema1 manifest format. Please upgrade to a schema2 image for better future compatibility. More information at https://docs.docker.com/registry/spec/deprecated-schema-v1/
a3ed95caeb02: Pull complete 
6f5424ebd796: Pull complete 
d15444df170a: Pull complete 
e83f073daa67: Pull complete 
a4d93e421023: Pull complete 
084adbca2647: Pull complete 
c9cec474c523: Pull complete 
Digest: sha256:e3456c851a152494c3e4ff5fcc26f240206abac0c9d794affb40e0714846c451
Status: Downloaded newer image for nginx:1.7.9
docker.io/library/nginx:1.7.9
[root@hdss7-200 harbor]# docker images |grep 1.7.9
nginx                           1.7.9                      84581e99d807        4 years ago         91.7MB
[root@hdss7-200 harbor]# docker tag 84581e99d807 harbor.od.com/public/nginx:v1.7.9

四、登錄harbor並推送到倉庫

[root@hdss7-200 harbor]# docker login harbor.od.com
Username: admin
Password: 
WARNING! Your password will be stored unencrypted in /root/.docker/config.json.
Configure a credential helper to remove this warning. See
https://docs.docker.com/engine/reference/commandline/login/#credentials-store

Login Succeeded
[root@hdss7-200 harbor]# docker push harbor.od.com/public/nginx:v1.7.9
The push refers to repository [harbor.od.com/public/nginx]
5f70bf18a086: Pushed 
4b26ab29a475: Pushed 
ccb1d68e3fb7: Pushed 
e387107e2065: Pushed 
63bf84221cce: Pushed 
e02dce553481: Pushed 
dea2e4984e29: Pushed 
v1.7.9: digest: sha256:b1f5935eb2e9e2ae89c0b3e2e148c19068d91ca502e857052f14db230443e4c2 size: 3012

2.6.9.檢查

能夠看到nginx鏡像已推送到public下

3.部署Master節點服務

3.1.部署etcd集羣

3.1.1.集羣規劃

主機名 角色 ip地址
hdss7-12.host.com etcd lead 10.4.7.12
hdss7-21.host.com etcd follow 10.4.7.21
hdss7-22.host.com etcd follow 10.4.7.22

注意：這裏部署文檔以hdss7-12.host.com爲例，另外兩臺部署方法相似

3.1.2.建立基於根證書的config配置文件

hdss7-200上建立

[root@hdss7-200 ~]# vi /opt/certs/ca-config.json
{
    "signing": {
        "default": {
            "expiry": "175200h"
        },
        "profiles": {
            "server": {
                "expiry": "175200h",
                "usages": [
                    "signing",
                    "key encipherment",
                    "server auth"
                ]
            },
            "client": {
                "expiry": "175200h",
                "usages": [
                    "signing",
                    "key encipherment",
                    "client auth"
                ]
            },
            "peer": {
                "expiry": "175200h",
                "usages": [
                    "signing",
                    "key encipherment",
                    "server auth",
                    "client auth"
                ]
            }
        }
    }
}

3.1.3.建立生成自簽證書的簽名請求（csr）的 json配置文件

[root@hdss7-200 ~]# vi /opt/certs/etcd-peer-csr.json
{
    "CN": "k8s-etcd",
    "hosts": [
        "10.4.7.11",
        "10.4.7.12",
        "10.4.7.21",
        "10.4.7.22"
    ],
    "key": {
        "algo": "rsa",
        "size": 2048
    },
    "names": [
        {
            "C": "CN",
            "ST": "beijing",
            "L": "beijing",
            "O": "od",
            "OU": "ops"
        }
    ]
}

3.1.4.生成etcd證書和私鑰

[root@hdss7-200 ~]# cd /opt/certs/
[root@hdss7-200 certs]# cfssl gencert -ca=ca.pem -ca-key=ca-key.pem -config=ca-config.json -profile=peer etcd-peer-csr.json |cfssl-json -bare etcd-peer
2019/11/16 14:03:17 [INFO] generate received request
2019/11/16 14:03:17 [INFO] received CSR
2019/11/16 14:03:17 [INFO] generating key: rsa-2048
2019/11/16 14:03:17 [INFO] encoded CSR
2019/11/16 14:03:17 [INFO] signed certificate with serial number 319260464385476820097369736582871670367101389147
2019/11/16 14:03:17 [WARNING] This certificate lacks a "hosts" field. This makes it unsuitable for
websites. For more information see the Baseline Requirements for the Issuance and Management
of Publicly-Trusted Certificates, v.1.1.6, from the CA/Browser Forum (https://cabforum.org);
specifically, section 10.2.3 ("Information Requirements").

3.1.5.檢查生成的證書和私鑰

[root@hdss7-200 certs]# ll
total 36
-rw-r--r-- 1 root root  836 Nov 16 13:52 ca-config.json
-rw-r--r-- 1 root root  993 Nov 11 00:30 ca.csr
-rw-r--r-- 1 root root  328 Nov 11 00:29 ca-csr.json
-rw------- 1 root root 1679 Nov 11 00:30 ca-key.pem
-rw-r--r-- 1 root root 1346 Nov 11 00:30 ca.pem
-rw-r--r-- 1 root root 1062 Nov 16 14:03 etcd-peer.csr
-rw-r--r-- 1 root root  363 Nov 16 13:59 etcd-peer-csr.json
-rw------- 1 root root 1679 Nov 16 14:03 etcd-peer-key.pem
-rw-r--r-- 1 root root 1428 Nov 16 14:03 etcd-peer.pem

3.1.6.建立etcd用戶

hdss7-12上

[root@hdss7-12 opt]# useradd -s /sbin/nologin -M etcd
[root@hdss7-12 opt]# id etcd
uid=1000(etcd) gid=1000(etcd) groups=1000(etcd)

3.1.7.下載軟件，解壓，作軟連接

https://github.com/etcd-io/etcd/tags   //這裏用的3.1.20版本，目前不建議超過3.3的版本
[root@hdss7-12 src]# tar xf etcd-v3.1.20-linux-amd64.tar.gz -C /opt/
[root@hdss7-12 src]# cd ..
[root@hdss7-12 opt]# mv etcd-v3.1.20-linux-amd64/ etcd-v3.1.20
[root@hdss7-12 opt]# ln -s /opt/etcd-v3.1.20/ /opt/etcd
[root@hdss7-12 opt]# ll
total 0
lrwxrwxrwx 1 root   root   18 Nov 16 14:22 etcd -> /opt/etcd-v3.1.20/
drwxr-xr-x 3 478493 89939 123 Oct 11  2018 etcd-v3.1.20
drwxr-xr-x 2 root   root   45 Nov 16 14:20 src

3.1.8.建立目錄，拷貝證書，私鑰

建立證書目錄、數據目錄、日誌目錄
[root@hdss7-12 opt]# mkdir -p /opt/etcd/certs /data/etcd /data/logs/etcd-server
拷貝3.1.4生成的證書文件
[root@hdss7-12 certs]# scp hdss7-200:/opt/certs/ca.pem .
[root@hdss7-12 certs]# scp hdss7-200:/opt/certs/etcd-peer.pem .
[root@hdss7-12 certs]# scp hdss7-200:/opt/certs/etcd-peer-kry.pem .
[root@hdss7-12 certs]# ll
total 12
-rw-r--r-- 1 root root 1346 Nov 16 14:31 ca.pem
-rw------- 1 root root 1679 Nov 16 14:34 etcd-peer-key.pem
-rw-r--r-- 1 root root 1428 Nov 16 14:33 etcd-peer.pem

3.1.9.建立etcd服務啓動腳本

etcd集羣各主機啓動配置略有不一樣，配置其餘節點時注意修改

[root@hdss7-12 ~]# vi /opt/etcd/etcd-server-startup.sh
#!/bin/sh
./etcd --name etcd-server-7-12 \
       --data-dir /data/etcd/etcd-server \
       --listen-peer-urls https://10.4.7.12:2380 \
       --listen-client-urls https://10.4.7.12:2379,http://127.0.0.1:2379 \
       --quota-backend-bytes 8000000000 \
       --initial-advertise-peer-urls https://10.4.7.12:2380 \
       --advertise-client-urls https://10.4.7.12:2379,http://127.0.0.1:2379 \
       --initial-cluster  etcd-server-7-12=https://10.4.7.12:2380,etcd-server-7-21=https://10.4.7.21:2380,etcd-server-7-22=https://10.4.7.22:2380 \
       --ca-file ./certs/ca.pem \
       --cert-file ./certs/etcd-peer.pem \
       --key-file ./certs/etcd-peer-key.pem \
       --client-cert-auth  \
       --trusted-ca-file ./certs/ca.pem \
       --peer-ca-file ./certs/ca.pem \
       --peer-cert-file ./certs/etcd-peer.pem \
       --peer-key-file ./certs/etcd-peer-key.pem \
       --peer-client-cert-auth \
       --peer-trusted-ca-file ./certs/ca.pem \
       --log-output stdout
       
       #############配置說明#########
       --listen-peer-urls https://10.4.7.12:2380 \            //內部通訊起的2380端口                                                   
       --listen-client-urls https://10.4.7.12:2379,http://127.0.0.1:2379 \ //對外通訊起的2379端口
       --quota-backend-bytes 8000000000 \                        // 後端配額       
       --initial-advertise-peer-urls https://10.4.7.12:2380 \
       --advertise-client-urls https://10.4.7.12:2379,http://127.0.0.1:2379 \
       --initial-cluster  etcd-server-7-12=https://10.4.7.12:2380,etcd-server-7-21=https://10.4.7.21:2380,etcd-server-7-22=https://10.4.7.22:2380 \
       --ca-file ./certs/ca.pem \
       --cert-file ./certs/etcd-peer.pem \
       --key-file ./certs/etcd-peer-key.pem \
       --client-cert-auth  \
       --trusted-ca-file ./certs/ca.pem \
       --peer-ca-file ./certs/ca.pem \
       --peer-cert-file ./certs/etcd-peer.pem \
       --peer-key-file ./certs/etcd-peer-key.pem \
       --peer-client-cert-auth \
       --peer-trusted-ca-file ./certs/ca.pem \
       --log-output stdout
 
[root@hdss7-12 ~]# chmod +x /opt/etcd/etcd-server.startup.sh 
[root@hdss7-12 ~]# ll /opt/etcd/etcd-server.startup.sh 
-rwxr-xr-x 1 root root 981 Nov 16 14:39 /opt/etcd/etcd-server.startup.sh

3.1.10.調整目錄權限

[root@hdss7-12 ~]# chown -R etcd.etcd /opt/etcd-v3.1.20/   /data/etcd/  /data/logs/etcd-server/

3.1.11.安裝supervison軟件

supervison是一個管理後臺進程的軟件，etcd進程掉了會自動拉起來

[root@hdss7-12 ~]# yum install supervisor -y
[root@hdss7-12 ~]# systemctl start supervisord
[root@hdss7-12 ~]# systemctl enable supervisord

3.1.12.建立etcd-server的啓動配置

etcd集羣各主機啓動配置略有不一樣，配置其餘節點時注意修改

[root@hdss7-12 ~]# vi /etc/supervisord.d/etcd-server.ini

[program:etcd-server-7-12]
command=/opt/etcd/etcd-server-startup.sh                        ; the program (relative uses PATH, can take args)
numprocs=1                                                      ; number of processes copies to start (def 1)
directory=/opt/etcd                                             ; directory to cwd to before exec (def no cwd)
autostart=true                                                  ; start at supervisord start (default: true)
autorestart=true                                                ; retstart at unexpected quit (default: true)
startsecs=30                                                    ; number of secs prog must stay running (def. 1)
startretries=3                                                  ; max # of serial start failures (default 3)
exitcodes=0,2                                                   ; 'expected' exit codes for process (default 0,2)
stopsignal=QUIT                                                 ; signal used to kill process (default TERM)
stopwaitsecs=10                                                 ; max num secs to wait b4 SIGKILL (default 10)
user=etcd                                                       ; setuid to this UNIX account to run the program
redirect_stderr=true                                            ; redirect proc stderr to stdout (default false)
stdout_logfile=/data/logs/etcd-server/etcd.stdout.log           ; stdout log path, NONE for none; default AUTO
stdout_logfile_maxbytes=64MB                                    ; max # logfile bytes b4 rotation (default 50MB)
stdout_logfile_backups=4                                        ; # of stdout logfile backups (default 10)
stdout_capture_maxbytes=1MB                                     ; number of bytes in 'capturemode' (default 0)
stdout_events_enabled=false                                     ; emit events on stdout writes (default false)

3.1.13.啓動etcd服務並檢查

[root@hdss7-12 ~]# supervisorctl update
etcd-server-7-12: added process group
[root@hdss7-12 ~]# supervisorctl status
etcd-server-7-12                 STARTING  
[root@hdss7-12 ~]# supervisorctl status
etcd-server-7-12                 RUNNING   pid 20350, uptime 0:01:14
[root@hdss7-12 ~]# netstat -luntp|grep etcd
tcp        0      0 10.4.7.12:2379          0.0.0.0:*               LISTEN      22657/./etcd        
tcp        0      0 127.0.0.1:2379          0.0.0.0:*               LISTEN      22657/./etcd        
tcp        0      0 10.4.7.12:2380          0.0.0.0:*               LISTEN      22657/./etcd RTING

3.1.14.安裝部署啓動檢查全部集羣

和上述無區別,最主要是修改兩個配置文件:
一、/opt/etcd/etcd-server-startup.sh的ip地址，
二、/etc/supervisord.d/etcd-server.ini

//修改supervisord啓動ini文件的program標籤，是爲了更好區分主機，生產規範，強迫症患者的福音，不修改不會形成啓動失敗

3.1.15.檢查集羣狀態

任意節點輸入

[root@hdss7-21 etcd]# ./etcdctl  cluster-health
member 988139385f78284 is healthy: got healthy result from http://127.0.0.1:2379
member 5a0ef2a004fc4349 is healthy: got healthy result from http://127.0.0.1:2379
member f4a0cb0a765574a8 is healthy: got healthy result from http://127.0.0.1:2379
cluster is healthy


[root@hdss7-21 etcd]# ./etcdctl member list
988139385f78284: name=etcd-server-7-22 peerURLs=https://10.4.7.22:2380 clientURLs=http://127.0.0.1:2379,https://10.4.7.22:2379 isLeader=false
5a0ef2a004fc4349: name=etcd-server-7-21 peerURLs=https://10.4.7.21:2380 clientURLs=http://127.0.0.1:2379,https://10.4.7.21:2379 isLeader=false
f4a0cb0a765574a8: name=etcd-server-7-12 peerURLs=https://10.4.7.12:2380 clientURLs=http://127.0.0.1:2379,https://10.4.7.12:2379 isLeader=true

3.2.部署kube-apiserver集羣

3.2.1.集羣規劃

主機名 角色 ip vip
hdss7-21.host.com kube-apiserver 10.4.7.21 無
hdss7-22.host.com kube-apiserver 10.4.7.22 無
hdss7-11.host.com L4 10.4.7.11 10.4.7.10
hdss7-12.host.com L4 10.4.7.12 10.4.7.10

注意：hdss7-11和hdss7-12使用nginx作4層負載均衡器，keepalived跑一個VIP：10.4.7.10，代理兩個kube-apiserver，實現高可用。
這裏以hdss21爲例，另一臺運算節點部署方法相似

3.2.2.下載軟件，解壓，作軟連接

hdss7-21.host.com上

官方github地址：github.com/kubernetes/releasses/tag/v1.15.4    //這裏是v1.15.2版本
下載方法：點擊版本號--》CHANGELOG-1.15.md--》DOWNLOAD --》server binaries--》找到kubenetes-server-linux-amd64.tar.gz

[root@hdss7-21 src]# tar xf kubernetes-server-linux-amd64-v1.15.2.tar.gz  -C /opt
[root@hdss7-21 opt]# mv kubernetes/ kubernetes-v1.15.2
[root@hdss7-21 opt]# ln -s /opt/kubernetes-v1.15.2/ /opt/kubernetes
[root@hdss7-21 opt]# ll
total 0
drwx--x--x 4 root root  28 Nov 16 03:06 containerd
lrwxrwxrwx 1 root root  18 Nov 16 15:44 etcd -> /opt/etcd-v3.1.20/
drwxr-xr-x 4 etcd etcd 166 Nov 17 00:39 etcd-v3.1.20
lrwxrwxrwx 1 root root  24 Nov 17 01:35 kubernetes -> /opt/kubernetes-v1.15.2/
drwxr-xr-x 4 root root  79 Aug  5 18:01 kubernetes-v1.15.2
drwxr-xr-x 2 root root 306 Nov 16 15:41 src


//刪掉無用的源碼包，bin下無用的tag，tar文件，不用adm方式部署，因此能夠刪除
[root@hdss7-21 opt]# cd kubernetes
[root@hdss7-21 kubernetes]# ls
addons  kubernetes-src.tar.gz  LICENSES  server
[root@hdss7-21 kubernetes]# rm -rf kubernetes-src.tar.gz 
[root@hdss7-21 kubernetes]# ll
total 1180
drwxr-xr-x 2 root root       6 Aug  5 18:01 addons
-rw-r--r-- 1 root root 1205293 Aug  5 18:01 LICENSES
drwxr-xr-x 3 root root      17 Aug  5 17:57 server
[root@hdss7-21 bin]# rm -f *.tar
[root@hdss7-21 bin]# rm -f *_tag
[root@hdss7-21 bin]# ll
total 884636
-rwxr-xr-x 1 root root  43534816 Aug  5 18:01 apiextensions-apiserver
-rwxr-xr-x 1 root root 100548640 Aug  5 18:01 cloud-controller-manager
-rwxr-xr-x 1 root root 200648416 Aug  5 18:01 hyperkube
-rwxr-xr-x 1 root root  40182208 Aug  5 18:01 kubeadm
-rwxr-xr-x 1 root root 164501920 Aug  5 18:01 kube-apiserver
-rwxr-xr-x 1 root root 116397088 Aug  5 18:01 kube-controller-manager
-rwxr-xr-x 1 root root  42985504 Aug  5 18:01 kubectl
-rwxr-xr-x 1 root root 119616640 Aug  5 18:01 kubelet
-rwxr-xr-x 1 root root  36987488 Aug  5 18:01 kube-proxy
-rwxr-xr-x 1 root root  38786144 Aug  5 18:01 kube-scheduler
-rwxr-xr-x 1 root root   1648224 Aug  5 18:01 mounter

3.2.3.簽發client證書

運維主機hdss7-200上

3.2.3.1.建立生成證書籤名請求（csr）的json配置文件
[root@hdss7-200 certs]#  vi /opt/certs/client-csr.json
{
    "CN": "k8s-node",
    "hosts": [
    ],
    "key": {
        "algo": "rsa",
        "size": 2048
    },
    "names": [
        {
            "C": "CN",
            "ST": "beijing",
            "L": "beijing",
            "O": "od",
            "OU": "ops"
        }
    ]
}
3.2.3.2.生成clent證書和私鑰
[root@hdss7-200 certs]# cfssl gencert -ca=ca.pem -ca-key=ca-key.pem -config=ca-config.json -profile=client client-csr.json |cfssl-json -bare client
3.2.3.3.檢查生成的證書和私鑰
[root@hdss7-200 certs]# ll
total 52
-rw-r--r-- 1 root root  836 Nov 16 13:52 ca-config.json
-rw-r--r-- 1 root root  993 Nov 11 00:30 ca.csr
-rw-r--r-- 1 root root  328 Nov 11 00:29 ca-csr.json
-rw------- 1 root root 1679 Nov 11 00:30 ca-key.pem
-rw-r--r-- 1 root root 1346 Nov 11 00:30 ca.pem
-rw-r--r-- 1 root root  993 Nov 16 17:47 client.csr
-rw-r--r-- 1 root root  280 Nov 16 17:45 client-csr.json
-rw------- 1 root root 1679 Nov 16 17:47 client-key.pem
-rw-r--r-- 1 root root 1363 Nov 16 17:47 client.pem
-rw-r--r-- 1 root root 1062 Nov 16 14:03 etcd-peer.csr
-rw-r--r-- 1 root root  363 Nov 16 13:59 etcd-peer-csr.json
-rw------- 1 root root 1679 Nov 16 14:03 etcd-peer-key.pem
-rw-r--r-- 1 root root 1428 Nov 16 14:03 etcd-peer.pem

3.2.4.簽發kube-apiserver證書

運維主機hdss7-200上

3.2.4.1.建立生成證書籤名請求（csr）的 json配置文件
[root@hdss7-200 certs]# vi /opt/certs/apiserver-csr.json
3.2.4.2.生成kube-apiserver證書和私鑰
[root@hdss7-200 certs]# cfssl gencert -ca=ca.pem -ca-key=ca-key.pem -config=ca-config.json -profile=server apiserver-csr.json |cfssl-json -bare apiserver
3.2.4.3.檢查生成的證書和私鑰
[root@hdss7-200 certs]# ll
total 68
-rw-r--r-- 1 root root 1249 Nov 16 17:55 apiserver.csr
-rw-r--r-- 1 root root  567 Nov 16 17:55 apiserver-csr.json
-rw------- 1 root root 1679 Nov 16 17:55 apiserver-key.pem
-rw-r--r-- 1 root root 1598 Nov 16 17:55 apiserver.pem
-rw-r--r-- 1 root root  836 Nov 16 13:52 ca-config.json
-rw-r--r-- 1 root root  993 Nov 11 00:30 ca.csr
-rw-r--r-- 1 root root  328 Nov 11 00:29 ca-csr.json
-rw------- 1 root root 1679 Nov 11 00:30 ca-key.pem
-rw-r--r-- 1 root root 1346 Nov 11 00:30 ca.pem
-rw-r--r-- 1 root root  993 Nov 16 17:47 client.csr
-rw-r--r-- 1 root root  280 Nov 16 17:45 client-csr.json
-rw------- 1 root root 1679 Nov 16 17:47 client-key.pem
-rw-r--r-- 1 root root 1363 Nov 16 17:47 client.pem
-rw-r--r-- 1 root root 1062 Nov 16 14:03 etcd-peer.csr
-rw-r--r-- 1 root root  363 Nov 16 13:59 etcd-peer-csr.json
-rw------- 1 root root 1679 Nov 16 14:03 etcd-peer-key.pem
-rw-r--r-- 1 root root 1428 Nov 16 14:03 etcd-peer.pem

3.2.5.拷貝證書至各運算節點，並建立配置

3.2.5.1.拷貝3套證書到.../bin/cert目錄
[root@hdss7-21 cert]# scp hdss7-200:/opt/certs/ca.pem .
[root@hdss7-21 cert]# scp hdss7-200:/opt/certs/ca-key.pem .
[root@hdss7-21 cert]# scp hdss7-200:/opt/certs/client.pem .
[root@hdss7-21 cert]# scp hdss7-200:/opt/certs/client-key.pem .
[root@hdss7-21 cert]# scp hdss7-200:/opt/certs/apiserver.pem .
[root@hdss7-21 cert]# scp hdss7-200:/opt/certs/apiserver-key.pem .
[root@hdss7-21 cert]# ll
total 24
-rw------- 1 root root 1679 Nov 17 02:11 apiserver-key.pem
-rw-r--r-- 1 root root 1598 Nov 17 02:08 apiserver.pem
-rw------- 1 root root 1679 Nov 17 02:07 ca-key.pem
-rw-r--r-- 1 root root 1346 Nov 17 02:06 ca.pem
-rw------- 1 root root 1679 Nov 17 02:08 client-key.pem
-rw-r--r-- 1 root root 1363 Nov 17 02:07 client.pem
3.2.5.2.建立配置
[root@hdss7-21 bin]# mkdir conf
[root@hdss7-21 conf]# vi audit.yaml
apiVersion: audit.k8s.io/v1beta1 # This is required.
kind: Policy
# Don't generate audit events for all requests in RequestReceived stage.
omitStages:
  - "RequestReceived"
rules:
  # Log pod changes at RequestResponse level
  - level: RequestResponse
    resources:
    - group: ""
      # Resource "pods" doesn't match requests to any subresource of pods,
      # which is consistent with the RBAC policy.
      resources: ["pods"]
  # Log "pods/log", "pods/status" at Metadata level
  - level: Metadata
    resources:
    - group: ""
      resources: ["pods/log", "pods/status"]

  # Don't log requests to a configmap called "controller-leader"
  - level: None
    resources:
    - group: ""
      resources: ["configmaps"]
      resourceNames: ["controller-leader"]

  # Don't log watch requests by the "system:kube-proxy" on endpoints or services
  - level: None
    users: ["system:kube-proxy"]
    verbs: ["watch"]
    resources:
    - group: "" # core API group
      resources: ["endpoints", "services"]

  # Don't log authenticated requests to certain non-resource URL paths.
  - level: None
    userGroups: ["system:authenticated"]
    nonResourceURLs:
    - "/api*" # Wildcard matching.
    - "/version"

  # Log the request body of configmap changes in kube-system.
  - level: Request
    resources:
    - group: "" # core API group
      resources: ["configmaps"]
    # This rule only applies to resources in the "kube-system" namespace.
    # The empty string "" can be used to select non-namespaced resources.
    namespaces: ["kube-system"]

  # Log configmap and secret changes in all other namespaces at the Metadata level.
  - level: Metadata
    resources:
    - group: "" # core API group
      resources: ["secrets", "configmaps"]

  # Log all other resources in core and extensions at the Request level.
  - level: Request
    resources:
    - group: "" # core API group
    - group: "extensions" # Version of group should NOT be included.

  # A catch-all rule to log all other requests at the Metadata level.
  - level: Metadata
    # Long-running requests like watches that fall under this rule will not
    # generate an audit event in RequestReceived.
    omitStages:
      - "RequestReceived"

3.2.6.建立apiserver啓動腳本

[root@hdss7-21 bin]# vi /opt/kubernetes/server/bin/kube-apiserver.sh
#!/bin/bash
./kube-apiserver \
  --apiserver-count 2 \
  --audit-log-path /data/logs/kubernetes/kube-apiserver/audit-log \
  --audit-policy-file ./conf/audit.yaml \
  --authorization-mode RBAC \
  --client-ca-file ./cert/ca.pem \
  --requestheader-client-ca-file ./cert/ca.pem \
  --enable-admission-plugins NamespaceLifecycle,LimitRanger,ServiceAccount,DefaultStorageClass,DefaultTolerationSeconds,MutatingAdmissionWebhook,ValidatingAdmissionWebhook,ResourceQuota \
  --etcd-cafile ./cert/ca.pem \
  --etcd-certfile ./cert/client.pem \
  --etcd-keyfile ./cert/client-key.pem \
  --etcd-servers https://10.4.7.12:2379,https://10.4.7.21:2379,https://10.4.7.22:2379 \
  --service-account-key-file ./cert/ca-key.pem \
  --service-cluster-ip-range 192.168.0.0/16 \
  --service-node-port-range 3000-29999 \
  --target-ram-mb=1024 \
  --kubelet-client-certificate ./cert/client.pem \
  --kubelet-client-key ./cert/client-key.pem \
  --log-dir  /data/logs/kubernetes/kube-apiserver \
  --tls-cert-file ./cert/apiserver.pem \
  --tls-private-key-file ./cert/apiserver-key.pem \
  --v 2
 
 #################參數說明############
    --apiserver-count 2 \                     // apiserver數量，有資源能夠給3個                 
  --audit-log-path /data/logs/kubernetes/kube-apiserver/audit-log \   //日誌目錄
  --audit-policy-file ./conf/audit.yaml \                   //日誌審計規則
  --authorization-mode RBAC \                           //RBAC --基於角色訪問的控制
  --client-ca-file ./cert/ca.pem \
  --requestheader-client-ca-file ./cert/ca.pem \
  --enable-admission-plugins NamespaceLifecycle,LimitRanger,ServiceAccount,DefaultStorageClass,DefaultTolerationSeconds,MutatingAdmissionWebhook,ValidatingAdmissionWebhook,ResourceQuota \
  --etcd-cafile ./cert/ca.pem \
  --etcd-certfile ./cert/client.pem \
  --etcd-keyfile ./cert/client-key.pem \
  --etcd-servers https://10.4.7.12:2379,https://10.4.7.21:2379,https://10.4.7.22:2379 \
  --service-account-key-file ./cert/ca-key.pem \
  --service-cluster-ip-range 192.168.0.0/16 \
  --service-node-port-range 3000-29999 \
  --target-ram-mb=1024 \                                              
  --kubelet-client-certificate ./cert/client.pem \
  --kubelet-client-key ./cert/client-key.pem \
  --log-dir  /data/logs/kubernetes/kube-apiserver \
  --tls-cert-file ./cert/apiserver.pem \
  --tls-private-key-file ./cert/apiserver-key.pem \
  --v 2                                 //log Level  是v 2 
  更多說明請看例子：
  [root@hdss7-21 bin]# ./kube-apiserver  --help|grep -A 5 target-ram-mb
      --target-ram-mb int                            Memory limit for apiserver in MB (used to configure sizes of caches, etc.)

Etcd flags:

      --default-watch-cache-size int             Default watch cache size. If zero, watch cache will be disabled for resources that do not have a default watch size set. (default 100)
      --delete-collection-workers int            Number of workers spawned for DeleteCollection call. These are used to speed up namespace cleanup. (default 1)

3.2.7.調整權限和目錄

[root@hdss7-21 bin]# chmod +x kube-apiserver.sh
 [root@hdss7-21 bin]# mkdir -p /data/logs/kubernetes/kube-apiserver

3.2.8.建立supervisor配置

[root@hdss7-21 bin]#  vi /etc/supervisord.d/kube-apiserver.ini
[program:kube-apiserver-7-21]
command=/opt/kubernetes/server/bin/kube-apiserver.sh            ; the program (relative uses PATH, can take args)
numprocs=1                                                      ; number of processes copies to start (def 1)
directory=/opt/kubernetes/server/bin                            ; directory to cwd to before exec (def no cwd)
autostart=true                                                  ; start at supervisord start (default: true)
autorestart=true                                                ; retstart at unexpected quit (default: true)
startsecs=30                                                    ; number of secs prog must stay running (def. 1)
startretries=3                                                  ; max # of serial start failures (default 3)
exitcodes=0,2                                                   ; 'expected' exit codes for process (default 0,2)
stopsignal=QUIT                                                 ; signal used to kill process (default TERM)
stopwaitsecs=10                                                 ; max num secs to wait b4 SIGKILL (default 10)
user=root                                                       ; setuid to this UNIX account to run the program
redirect_stderr=true                                            ; redirect proc stderr to stdout (default false)
stdout_logfile=/data/logs/kubernetes/kube-apiserver/apiserver.stdout.log        ; stderr log path, NONE for none; default AUTO
stdout_logfile_maxbytes=64MB                                    ; max # logfile bytes b4 rotation (default 50MB)
stdout_logfile_backups=4                                        ; # of stdout logfile backups (default 10)
stdout_capture_maxbytes=1MB                                     ; number of bytes in 'capturemode' (default 0)
stdout_events_enabled=false                                     ; emit events on stdout writes (default false)

3.2.9.啓動服務並檢查

[root@hdss7-21 bin]# supervisorctl update
[root@hdss7-21 bin]# supervisorctl status
etcd-server-7-21                 RUNNING   pid 1716, uptime 2:01:19
kube-apiserver-7-21              RUNNING   pid 2032, uptime 0:01:33

[root@hdss7-21 bin]# netstat -nltup|grep kube-api
tcp        0      0 127.0.0.1:8080          0.0.0.0:*               LISTEN      2033/./kube-apiserv 
tcp6       0      0 :::6443                 :::*                    LISTEN      2033/./kube-apiserv

3.2.10.安裝部署啓動檢查全部集羣

hdss7-22 跟上述基本相同
/etc/supervisord.d/kube-apiserver.ini
須要更改爲[program:kube-apiserver-7-22]

3.2.11.配四層反向代理

VIP 10.4.7.10：7443代理 兩臺apiserver的6443端口，此處會用到keepalived

3.2.11.1安裝nginx和keepalived
hdss7-11和hdss7-12都安裝nginx和keepalived
[root@hdss7-12 etcd]# yum install nginx -y
hdss7-11和hdss7-12配置nginx.conf
[root@hdss7-11 conf.d]# vi /etc/nginx/nginx.conf        //最後追加
stream {
    upstream kube-apiserver {
        server 10.4.7.21:6443     max_fails=3 fail_timeout=30s;
        server 10.4.7.22:6443     max_fails=3 fail_timeout=30s;
    }
    server {
        listen 7443;
        proxy_connect_timeout 2s;
        proxy_timeout 900s;
        proxy_pass kube-apiserver;
    }
}
[root@hdss7-12 etcd]# nginx -t
nginx: the configuration file /etc/nginx/nginx.conf syntax is ok
nginx: configuration file /etc/nginx/nginx.conf test is successful
hdss7-11和hdss7-12配置keepalived

檢查腳本

[root@hdss7-11 ~]# vi /etc/keepalived/check_port.sh
#!/bin/bash
#keepalived 監控端口腳本
#使用方法：
#在keepalived的配置文件中
#vrrp_script check_port {#建立一個vrrp_script腳本,檢查配置
#    script "/etc/keepalived/check_port.sh 6379" #配置監聽的端口
#    interval 2 #檢查腳本的頻率,單位（秒）
#}
CHK_PORT=$1
if [ -n "$CHK_PORT" ];then
        PORT_PROCESS=`ss -lnt|grep $CHK_PORT|wc -l`
        if [ $PORT_PROCESS -eq 0 ];then
                echo "Port $CHK_PORT Is Not Used,End."
                exit 1
        fi
else
        echo "Check Port Cant Be Empty!"
fi

[root@hdss7-11 ~]# chmod +x /etc/keepalived/check_port.sh

配置文件

keepalived 主:
[root@hdss7-11 conf.d]# vi /etc/keepalived/keepalived.conf 

! Configuration File for keepalived

global_defs {
   router_id 10.4.7.11

}

vrrp_script chk_nginx {
    script "/etc/keepalived/check_port.sh 7443"
    interval 2
    weight -20
}

vrrp_instance VI_1 {
    state MASTER
    interface eth0
    virtual_router_id 251
    priority 100
    advert_int 1
    mcast_src_ip 10.4.7.11
    nopreempt

    authentication {
        auth_type PASS
        auth_pass 11111111
    }
    track_script {
         chk_nginx
    }
    virtual_ipaddress {
        10.4.7.10
    }
}



keepalived從:
[root@hdss7-12 conf.d]# vi /etc/keepalived/keepalived.conf 

! Configuration File for keepalived
global_defs {
    router_id 10.4.7.12
}
vrrp_script chk_nginx {
    script "/etc/keepalived/check_port.sh 7443"
    interval 2
    weight -20
}
vrrp_instance VI_1 {
    state BACKUP
    interface eth0
    virtual_router_id 251
    mcast_src_ip 10.4.7.12
    priority 90
    advert_int 1
    authentication {
        auth_type PASS
        auth_pass 11111111
    }
    track_script {
        chk_nginx
    }
    virtual_ipaddress {
        10.4.7.10
    }
}

3.2.12.啓動代理並檢查

//hdss7-11和hdss7-12上啓動nginx
~]# systemctl start nginx
~]# systemctl enable nginx
Created symlink from /etc/systemd/system/multi-user.target.wants/nginx.service to /usr/lib/systemd/system/nginx.service.
~]# netstat -nltup|grep nginx
tcp        0      0 0.0.0.0:80              0.0.0.0:*               LISTEN      21520/nginx: master 
tcp        0      0 0.0.0.0:7443            0.0.0.0:*               LISTEN      21520/nginx: master 
tcp6       0      0 :::80                   :::*                    LISTEN      21520/nginx: master 

//hdss7-11和hdss7-12上啓動keepalived
~]# systemctl start keepalived.service
~]# systemctl enable  keepalived
Created symlink from /etc/systemd/system/multi-user.target.wants/keepalived.service to /usr/lib/systemd/system/keepalived.service.

//檢查
[root@hdss7-11 ~]# ip addr
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP group default qlen 1000
    link/ether 00:0c:29:4c:f4:9e brd ff:ff:ff:ff:ff:ff
    inet 10.4.7.11/24 brd 10.4.7.255 scope global noprefixroute eth0
       valid_lft forever preferred_lft forever
    inet 10.4.7.10/32 scope global eth0
       valid_lft forever preferred_lft forever

//VIP漂移測試
nginx -s stop測試，略。。。

注意：keepalived hdss7-11配置 nopreempt，意爲非搶佔式
緣由：若是搶佔式，假如生產網絡抖動緣由，check_port腳本探測不到，VIP有可能會動觸發報警，VIP漂移在生產上屬於重大生產事故，是要寫故障報告的，是沒法忍受的

3.3.部署controller-manager

3.3.1.集羣規劃

主機名 角色 ip
hdss7-21.host.com controller-manager 10.4.7.21
hdss7-22.host.com controller-manager 10.4.7.21

注意：這裏部署文檔以hdss7-21爲例，另一臺相似

3.3.2.建立啓動腳本

hdss7-21上

[root@hdss7-21 bin]# vi /opt/kubernetes/server/bin/kube-controller-manager.sh
#!/bin/sh
./kube-controller-manager \
  --cluster-cidr 172.7.0.0/16 \
  --leader-elect true \
  --log-dir /data/logs/kubernetes/kube-controller-manager \
  --master http://127.0.0.1:8080 \
  --service-account-private-key-file ./cert/ca-key.pem \
  --service-cluster-ip-range 192.168.0.0/16 \
  --root-ca-file ./cert/ca.pem \
  --v 2

3.3.3.調整文件權限，建立目錄

[root@hdss7-21 bin]# chmod +x /opt/kubernetes/server/bin/kube-controller-manager.sh 
[root@hdss7-21 bin]# mkdir -p /data/logs/kubernetes/kube-controller-manager

3.3.4.建立supervisor配置

[root@hdss7-21 bin]# vi /etc/supervisord.d/kube-conntroller-manager.ini
[program:kube-controller-manager-7-21]
command=/opt/kubernetes/server/bin/kube-controller-manager.sh                     ; the program (relative uses PATH, can take args)
numprocs=1                                                                        ; number of processes copies to start (def 1)
directory=/opt/kubernetes/server/bin                                              ; directory to cwd to before exec (def no cwd)
autostart=true                                                                    ; start at supervisord start (default: true)
autorestart=true                                                                  ; retstart at unexpected quit (default: true)
startsecs=30                                                                      ; number of secs prog must stay running (def. 1)
startretries=3                                                                    ; max # of serial start failures (default 3)
exitcodes=0,2                                                                     ; 'expected' exit codes for process (default 0,2)
stopsignal=QUIT                                                                   ; signal used to kill process (default TERM)
stopwaitsecs=10                                                                   ; max num secs to wait b4 SIGKILL (default 10)
user=root                                                                         ; setuid to this UNIX account to run the program
redirect_stderr=true                                                              ; redirect proc stderr to stdout (default false)
stdout_logfile=/data/logs/kubernetes/kube-controller-manager/controller.stdout.log  ; stderr log path, NONE for none; default AUTO
stdout_logfile_maxbytes=64MB                                                      ; max # logfile bytes b4 rotation (default 50MB)
stdout_logfile_backups=4                                                          ; # of stdout logfile backups (default 10)
stdout_capture_maxbytes=1MB                                                       ; number of bytes in 'capturemode' (default 0)
stdout_events_enabled=false                                                       ; emit events on stdout writes (default false)

3.3.5.啓動服務並檢查

[root@hdss7-21 bin]# supervisorctl update
kube-controller-manager-7-21: added process group

[root@hdss7-21 bin]# supervisorctl status
etcd-server-7-21                 RUNNING   pid 1716, uptime 3:44:21
kube-apiserver-7-21              RUNNING   pid 2032, uptime 1:44:35
kube-controller-manager-7-21     RUNNING   pid 2196, uptime 0:00:50

3.3.6.安裝部署啓動檢查全部集羣規劃主機

hdss7-22 跟上述基本相同
/etc/supervisord.d/ kube-conntroller-manager.ini
須要更改爲[program:kube-conntroller-manager-7-22]

3.4.部署kube-scheduler

3.4.1.集羣規劃

主機名 角色 ip
hdss7-21.host.com kube-scheduler 10.4.7.21
hdss7-22.host.com kube-scheduler 10.4.7.22

注意：這裏部署文檔以hdss7-21爲例，另外一運算節點相似

3.4.2.建立啓動腳本

hdss7-21上

[root@hdss7-21 bin]# vi /opt/kubernetes/server/bin/kube-scheduler.sh
#!/bin/sh
./kube-scheduler \
  --leader-elect  \
  --log-dir /data/logs/kubernetes/kube-scheduler \
  --master http://127.0.0.1:8080 \
  --v 2
  
  
  
  //若是主控節點組件在不一樣的地方，是須要證書驗證的，實驗環境是在一個宿主機，因此這裏無需證書

3.4.3.調整文件權限，建立目錄

[root@hdss7-21 bin]# chmod +x  /opt/kubernetes/server/bin/kube-scheduler.sh
[root@hdss7-21 bin]# mkdir -p /data/logs/kubernetes/kube-scheduler

3.4.4.建立supervisor配置

[root@hdss7-21 bin]# vi /etc/supervisord.d/kube-scheduler.ini
[program:kube-scheduler-7-21]
command=/opt/kubernetes/server/bin/kube-scheduler.sh                     ; the program (relative uses PATH, can take args)
numprocs=1                                                               ; number of processes copies to start (def 1)
directory=/opt/kubernetes/server/bin                                     ; directory to cwd to before exec (def no cwd)
autostart=true                                                           ; start at supervisord start (default: true)
autorestart=true                                                         ; retstart at unexpected quit (default: true)
startsecs=30                                                             ; number of secs prog must stay running (def. 1)
startretries=3                                                           ; max # of serial start failures (default 3)
exitcodes=0,2                                                            ; 'expected' exit codes for process (default 0,2)
stopsignal=QUIT                                                          ; signal used to kill process (default TERM)
stopwaitsecs=10                                                          ; max num secs to wait b4 SIGKILL (default 10)
user=root                                                                ; setuid to this UNIX account to run the program
redirect_stderr=true                                                     ; redirect proc stderr to stdout (default false)
stdout_logfile=/data/logs/kubernetes/kube-scheduler/scheduler.stdout.log ; stderr log path, NONE for none; default AUTO
stdout_logfile_maxbytes=64MB                                             ; max # logfile bytes b4 rotation (default 50MB)
stdout_logfile_backups=4                                                 ; # of stdout logfile backups (default 10)
stdout_capture_maxbytes=1MB                                              ; number of bytes in 'capturemode' (default 0)
stdout_events_enabled=false                                              ; emit events on stdout writes (default false)

3.4.5.啓動服務並檢查

[root@hdss7-21 bin]# supervisorctl update
kube-scheduler-7-21: added process group
[root@hdss7-21 bin]# supervisorctl status
etcd-server-7-21 RUNNING pid 1716, uptime 4:11:22
kube-apiserver-7-21 RUNNING pid 2032, uptime 2:11:36
kube-controller-manager-7-21 RUNNING pid 2196, uptime 0:27:51
kube-scheduler-7-21 RUNNING pid 2284, uptime 0:00:33

3.4.6.安裝部署啓動檢查全部集羣規劃主機

hdss7-22 跟上述基本相同
/etc/supervisord.d/ kube-scheduler.ini
須要更改爲[program:kube-scheduler-7-22]

3.5.檢查主控節點

3.5.1.創建kubectl軟連接

[root@hdss7-22 bin]#  ln -s /opt/kubernetes/server/bin/kubectl /usr/bin/kubectl

3.5.2.檢查主控節點

檢查集羣健康狀態 cs（cluster status）
[root@hdss7-21 bin]# kubectl get cs
NAME                 STATUS    MESSAGE              ERROR
controller-manager   Healthy   ok                   
scheduler            Healthy   ok                   
etcd-2               Healthy   {"health": "true"}   
etcd-0               Healthy   {"health": "true"}   
etcd-1               Healthy   {"health": "true"}

4.部署node節點服務

4.1.部署kubelet

4.1.1.集羣規劃

主機名 角色 ip
hdss7-21.host.com kubelet 10.4.7.21
hdss7-22.host.com kubelet 10.4.7.22

注意：這裏部署文檔以 hdss7-21主機爲例，另一臺運算節點安裝部署方法相似

4.1.2.簽發kubelet證書

運維主機hdss7-200上

4.1.2.1.建立生成證書籤名請求（csr）的json配置文件
[root@hdss7-200 certs]# vi kubelet-csr.json
{
    "CN": "k8s-kubelet",
    "hosts": [
    "127.0.0.1",
    "10.4.7.10",
    "10.4.7.21",
    "10.4.7.22",
    "10.4.7.23",
    "10.4.7.24",
    "10.4.7.25",
    "10.4.7.26",
    "10.4.7.27",
    "10.4.7.28"
    ],
    "key": {
        "algo": "rsa",
        "size": 2048
    },
    "names": [
        {
            "C": "CN",
            "ST": "beijing",
            "L": "beijing",
            "O": "od",
            "OU": "ops"
        }
    ]
}
4.1.2.2.生成kubelet證書和私鑰
[root@hdss7-200 certs]# cfssl gencert -ca=ca.pem -ca-key=ca-key.pem -config=ca-config.json -profile=server kubelet-csr.json | cfssl-json -bare kubelet
4.1.2.3.檢查生成的證書和私鑰
[root@hdss7-200 certs]# ll
total 84
-rw-r--r-- 1 root root 1115 Nov 16 22:03 kubelet.csr
-rw-r--r-- 1 root root  452 Nov 16 21:59 kubelet-csr.json
-rw------- 1 root root 1679 Nov 16 22:03 kubelet-key.pem
-rw-r--r-- 1 root root 1468 Nov 16 22:03 kubelet.pem

4.1.3.拷貝證書到各運算節點，並建立配置

hdss7-21 上

4.1.3.1.拷貝證書，私鑰，注意私鑰文件屬性600
[root@hdss7-21 cert]# scp hdss7-200:/opt/certs/kubelet.pem .
[root@hdss7-21 cert]# scp hdss7-200:/opt/certs/kubelet-key.pem .
[root@hdss7-21 cert]# ll
total 32
-rw------- 1 root root 1679 Nov 17 02:11 apiserver-key.pem
-rw-r--r-- 1 root root 1598 Nov 17 02:08 apiserver.pem
-rw------- 1 root root 1679 Nov 17 02:07 ca-key.pem
-rw-r--r-- 1 root root 1346 Nov 17 02:06 ca.pem
-rw------- 1 root root 1679 Nov 17 02:08 client-key.pem
-rw-r--r-- 1 root root 1363 Nov 17 02:07 client.pem
-rw------- 1 root root 1679 Nov 17 06:12 kubelet-key.pem
-rw-r--r-- 1 root root 1468 Nov 17 06:11 kubelet.pem
4.1.3.2.建立配置---分四步

都在conf目錄下

4.1.3.2.1.set-cluster
[root@hdss7-21 conf]# kubectl config set-cluster myk8s \
--certificate-authority=/opt/kubernetes/server/bin/cert/ca.pem \
--embed-certs=true \
--server=https://10.4.7.10:7443 \
--kubeconfig=kubelet.kubeconfig

返回結果：
Cluster "myk8s" set.
4.1.3.2.2.set-credentials
[root@hdss7-21 conf]# kubectl config set-credentials k8s-node \
--client-certificate=/opt/kubernetes/server/bin/cert/client.pem \
--client-key=/opt/kubernetes/server/bin/cert/client-key.pem \
--embed-certs=true \
--kubeconfig=kubelet.kubeconfig 

返回結果：
User "k8s-node" set.
4.1.3.2.3.set-context
[root@hdss7-21 conf]# kubectl config set-context myk8s-context \
--cluster=myk8s \
--user=k8s-node \
--kubeconfig=kubelet.kubeconfig

返回結果：
Context "myk8s-context" created.
4.1.3.2.4.use-context
[root@hdss7-21 conf]# kubectl config use-context myk8s-context --kubeconfig=kubelet.kubeconfig

返回結果：
Switched to context "myk8s-context".
4.1.3.2.5.查看生成的kubelet.kubeconfig
[root@hdss7-21 conf]# ll
total 12
-rw-r--r-- 1 root root 2223 Nov 17 02:18 audit.yaml
-rw------- 1 root root 6199 Nov 17 06:32 kubelet.kubeconfig

cat下面的這段實際上就是ca.pem 通過base64編譯之後的編碼


4.1.3.2.6.k8s-node.yaml

一、建立配置文件

[root@hdss7-21 conf]# vi k8s-node.yaml
apiVersion: rbac.authorization.k8s.io/v1
kind: ClusterRoleBinding
metadata:
  name: k8s-node
roleRef:
  apiGroup: rbac.authorization.k8s.io
  kind: ClusterRole
  name: system:node
subjects:
- apiGroup: rbac.authorization.k8s.io
  kind: User
  name: k8s-node

二、根據配置文件建立用戶

[root@hdss7-21 conf]# kubectl create -f k8s-node.yaml            //-f 指定配置文件
clusterrolebinding.rbac.authorization.k8s.io/k8s-node created    //建立角色後會存到etcd裏

三、查詢集羣角色和查看角色屬性

[root@hdss7-21 conf]# kubectl get clusterrolebinding k8s-node
NAME       AGE
k8s-node   7m54s

[root@hdss7-21 conf]# kubectl get clusterrolebinding k8s-node -o yaml
apiVersion: rbac.authorization.k8s.io/v1
kind: ClusterRoleBinding                       //定義了一個集羣綁定資源，k8s一切皆資源
metadata:
  creationTimestamp: "2019-11-16T22:53:06Z"
  name: k8s-node                                //資源的名稱爲k8s-node
  resourceVersion: "11262"
  selfLink: /apis/rbac.authorization.k8s.io/v1/clusterrolebindings/k8s-node
  uid: 2b87d554-de37-494d-b6dd-7c5d0ecdd5d6
roleRef:
  apiGroup: rbac.authorization.k8s.io
  kind: ClusterRole
  name: system:node                                  //給k8s-node集羣用戶綁定了一個集羣角色，叫system：node，意思是讓下面k8s-node用戶具有這個集羣裏運算節點的權限
subjects:
- apiGroup: rbac.authorization.k8s.io
  kind: User
  name: k8s-node

四、拷貝kubelet.kubeconfig 到hdss7-22上

[root@hdss7-22 conf]# scp hdss7-21:/opt/kubernetes/server/bin/conf/kubelet.kubeconfig .
[root@hdss7-22 conf]# ll
total 12
-rw-r--r-- 1 root root 2223 Nov 16 18:48 audit.yaml
-rw------- 1 root root 6199 Nov 16 23:14 kubelet.kubeconfig

4.1.4.準備pause基礎鏡像

運維主機 hdss7-200上

爲何須要這個pause基礎鏡像？
緣由：須要用一個pause基礎鏡像把這臺機器的pod拉起來，由於kubelet是幹活的節點，它幫咱們調度docker引擎，邊車模式，讓kebelet控制一個小鏡像，先於咱們的業務容器起來，讓它幫咱們業務容器去設置：UTC、NET、IPC，讓它先把命名空間占上，業務容易還沒起來的時候，pod的ip已經分配出來了。

4.1.4.1.下載pause鏡像

運維主機 hdss7-200

[root@hdss7-200 ~]# docker pull kubernetes/pause
Using default tag: latest
latest: Pulling from kubernetes/pause
4f4fb700ef54: Pull complete 
b9c8ec465f6b: Pull complete 
Digest: sha256:b31bfb4d0213f254d361e0079deaaebefa4f82ba7aa76ef82e90b4935ad5b105
Status: Downloaded newer image for kubernetes/pause:latest
docker.io/kubernetes/pause:latest
4.1.4.2.提交至docker私有倉庫（harbor）中
4.1.4.2.1.給鏡像打tag
[root@hdss7-200 ~]# docker tag f9d5de079539 harbor.od.com/public/pause:latest
[root@hdss7-200 ~]# docker images -a
REPOSITORY                      TAG                        IMAGE ID            CREATED             SIZE
...                                                                     
kubernetes/pause                latest                     f9d5de079539        5 years ago         240kB
harbor.od.com/public/pause      latest                     f9d5de079539        5 years ago         240kB
4.1.4.2.2.推到harbor上
[root@hdss7-200 ~]# docker push harbor.od.com/public/pause:latest
The push refers to repository [harbor.od.com/public/pause]
5f70bf18a086: Mounted from public/nginx 
e16a89738269: Pushed 
latest: digest: sha256:b31bfb4d0213f254d361e0079deaaebefa4f82ba7aa76ef82e90b4935ad5b105 size: 938

4.1.5.建立kubelet啓動腳本

hdss7-21上

[root@hdss7-21 conf]# vi /opt/kubernetes/server/bin/kubelet.sh
#!/bin/sh
./kubelet \
  --anonymous-auth=false \
  --cgroup-driver systemd \
  --cluster-dns 192.168.0.2 \
  --cluster-domain cluster.local \
  --runtime-cgroups=/systemd/system.slice \
  --kubelet-cgroups=/systemd/system.slice \
  --fail-swap-on="false" \
  --client-ca-file ./cert/ca.pem \
  --tls-cert-file ./cert/kubelet.pem \
  --tls-private-key-file ./cert/kubelet-key.pem \
  --hostname-override hdss7-21.host.com \
  --image-gc-high-threshold 20 \
  --image-gc-low-threshold 10 \
  --kubeconfig ./conf/kubelet.kubeconfig \
  --log-dir /data/logs/kubernetes/kube-kubelet \
  --pod-infra-container-image harbor.od.com/public/pause:latest \
  --root-dir /data/kubelet
  
  ###################參數說明############
    --anonymous-auth=false \                                  //匿名登錄，這裏不容許
  --cgroup-driver systemd \                                    //這裏和docker的daemon.json保持一直
  --cluster-dns 192.168.0.2 \                                   
  --cluster-domain cluster.local \
  --runtime-cgroups=/systemd/system.slice \
  --kubelet-cgroups=/systemd/system.slice \
  --fail-swap-on="false" \                                  //正常是關閉swap分區的。這裏不關，沒有關閉swap分區正常啓動，沒有報錯
  --client-ca-file ./cert/ca.pem \
  --tls-cert-file ./cert/kubelet.pem \
  --tls-private-key-file ./cert/kubelet-key.pem \
  --hostname-override hdss7-21.host.com \           
  --image-gc-high-threshold 20 \
  --image-gc-low-threshold 10 \
  --kubeconfig ./conf/kubelet.kubeconfig \          
  --log-dir /data/logs/kubernetes/kube-kubelet \
  --pod-infra-container-image harbor.od.com/public/pause:latest \
  --root-dir /data/kubelet

注意：kubelet集羣個主機的啓動腳本略不一樣，其餘節點注意修改：--hostname-override

4.1.6.檢查配置，權限，建立日誌目錄

hdss7-21上

[root@hdss7-21 conf]# ls -l|grep kubelet
-rw------- 1 root root 6199 Nov 17 06:32 kubelet.kubeconfig

[root@hdss7-21 conf]# chmod +x /opt/kubernetes/server/bin/kubelet.sh 
[root@hdss7-21 conf]# mkdir -p /data/logs/kubernetes/kube-kubelet   /data/kubelet

4.1.7.建立supervisor配置

[root@hdss7-21 conf]#  vi /etc/supervisord.d/kube-kubelet.ini
[program:kube-kubelet-7-21]
command=/opt/kubernetes/server/bin/kubelet.sh     ; the program (relative uses PATH, can take args)
numprocs=1                                        ; number of processes copies to start (def 1)
directory=/opt/kubernetes/server/bin              ; directory to cwd to before exec (def no cwd)
autostart=true                                    ; start at supervisord start (default: true)
autorestart=true                                  ; retstart at unexpected quit (default: true)
startsecs=30                                      ; number of secs prog must stay running (def. 1)
startretries=3                                    ; max # of serial start failures (default 3)
exitcodes=0,2                                     ; 'expected' exit codes for process (default 0,2)
stopsignal=QUIT                                   ; signal used to kill process (default TERM)
stopwaitsecs=10                                   ; max num secs to wait b4 SIGKILL (default 10)
user=root                                         ; setuid to this UNIX account to run the program
redirect_stderr=true                              ; redirect proc stderr to stdout (default false)
stdout_logfile=/data/logs/kubernetes/kube-kubelet/kubelet.stdout.log   ; stderr log path, NONE for none; default AUTO
stdout_logfile_maxbytes=64MB                      ; max # logfile bytes b4 rotation (default 50MB)
stdout_logfile_backups=4                          ; # of stdout logfile backups (default 10)
stdout_capture_maxbytes=1MB                       ; number of bytes in 'capturemode' (default 0)
stdout_events_enabled=false                       ; emit events on stdout writes (default false)

注意：其餘主機部署時請注意修改program標籤

4.1.8.啓動服務並檢查

[root@hdss7-21 conf]# supervisorctl  update
kube-kubelet-7-21: added process group
[root@hdss7-21 bin]# supervisorctl status
etcd-server-7-21                 RUNNING   pid 3270, uptime 0:00:46
kube-apiserver-7-21              RUNNING   pid 3273, uptime 0:00:46
kube-controller-manager-7-21     RUNNING   pid 3267, uptime 0:00:46
kube-kubelet-7-21                RUNNING   pid 3268, uptime 0:00:46
kube-scheduler-7-21              RUNNING   pid 3269, uptime 0:00:46

遇到一個問題，沒起來：
查看日誌原來是個人docker服務沒起，systemctl  start docker    systemctl enable docker

4.1.9.檢查運算節點

[root@hdss7-21 bin]# tailf /data/logs/kubernetes/kube-kubelet/kubelet.stdout.log 
I1117 08:24:38.074479    3272 kubelet_node_status.go:72] Attempting to register node hdss7-21.host.com
E1117 08:24:38.088198    3272 kubelet.go:2248] node "hdss7-21.host.com" not found
I1117 08:24:38.088590    3272 kubelet_node_status.go:75] Successfully registered node hdss7-21.host.com
I1117 08:24:38.119351    3272 cpu_manager.go:155] [cpumanager] starting with none policy
I1117 08:24:38.119363    3272 cpu_manager.go:156] [cpumanager] reconciling every 10s
I1117 08:24:38.119382    3272 policy_none.go:42] [cpumanager] none policy: Start
I1117 08:24:38.155413    3272 kubelet.go:1822] skipping pod synchronization - container runtime status check may not have completed yet
W1117 08:24:38.374787    3272 manager.go:546] Failed to retrieve checkpoint for "kubelet_internal_checkpoint": checkpoint is not found
I1117 08:24:38.375126    3272 plugin_manager.go:116] Starting Kubelet Plugin Manager
I1117 08:24:38.690595    3272 reconciler.go:150] Reconciler: start to sync state

4.1.10.安裝部署啓動檢查全部集羣規劃主機

其餘節點相似，有些須要稍許調整，上面有標註：
/opt/kubernetes/server/bin/conf/kubelet.kubeconfig
/opt/kubernetes/server/bin/kubelet.sh
/etc/supervisord.d/kube-kubelet.ini

4.1.11.檢查全部運算節點

[root@hdss7-21 bin]# kubectl get nodes
NAME                STATUS   ROLES    AGE   VERSION
hdss7-21.host.com   Ready    <none>   8h    v1.15.2
hdss7-22.host.com   Ready    <none>   8h    v1.15.2

// 角色是none，打個標籤，標籤是特點管理功能之一

[root@hdss7-21 bin]# kubectl label node hdss7-21.host.com node-role.kubernetes.io/master=
node/hdss7-21.host.com labeled
[root@hdss7-21 bin]# kubectl get nodes
NAME                STATUS   ROLES    AGE   VERSION
hdss7-21.host.com   Ready    master   8h    v1.15.2
hdss7-22.host.com   Ready    <none>   8h    v1.15.2
[root@hdss7-21 bin]# kubectl label node hdss7-21.host.com node-role.kubernetes.io/node=
node/hdss7-21.host.com labeled
[root@hdss7-21 bin]# kubectl get nodes
NAME                STATUS   ROLES         AGE   VERSION
hdss7-21.host.com   Ready    master,node   8h    v1.15.2
hdss7-22.host.com   Ready    <none>        8h    v1.15.2

4.2.部署kube-proxy

聯結pod網絡和集羣網絡

4.2.1.集羣規劃

主機名 角色 ip
hdss7-21.host.com kube-proxy 10.4.7.21
hdss7-22.host.com kube-proxy 10.4.7.21

注意：這裏部署以hdss7-21主機爲例，其餘運算節點相似

4.2.2.簽發kube-proxy證書

運維主機hdss7-200上

4.2.2.1.建立生成證書籤名請求（csr）的json配置文件
[root@hdss7-200 certs]# vi kube-proxy-csr.json
{
    "CN": "system:kube-proxy",
    "key": {
        "algo": "rsa",
        "size": 2048
    },
    "names": [
        {
            "C": "CN",
            "ST": "beijing",
            "L": "beijing",
            "O": "od",
            "OU": "ops"
        }
    ]
}
4.2.2.2.生成kubelet證書和私鑰
[root@hdss7-200 certs]# cfssl gencert -ca=ca.pem -ca-key=ca-key.pem -config=ca-config.json -profile=client kube-proxy-csr.json |cfssl-json -bare kube-proxy-client
2019/11/17 00:58:31 [INFO] generate received request
2019/11/17 00:58:31 [INFO] received CSR
2019/11/17 00:58:31 [INFO] generating key: rsa-2048
2019/11/17 00:58:31 [INFO] encoded CSR
2019/11/17 00:58:31 [INFO] signed certificate with serial number 490532965938220149616881213802710440162344647640
2019/11/17 00:58:31 [WARNING] This certificate lacks a "hosts" field. This makes it unsuitable for
websites. For more information see the Baseline Requirements for the Issuance and Management
of Publicly-Trusted Certificates, v.1.1.6, from the CA/Browser Forum (https://cabforum.org);
specifically, section 10.2.3 ("Information Requirements").
4.2.2.3.檢查生成的證書和私鑰
[root@hdss7-200 certs]# ll
-rw-r--r-- 1 root root 1005 Nov 17 00:58 kube-proxy-client.csr
-rw------- 1 root root 1675 Nov 17 00:58 kube-proxy-client-key.pem
-rw-r--r-- 1 root root 1375 Nov 17 00:58 kube-proxy-client.pem
-rw-r--r-- 1 root root  267 Nov 17 00:57 kube-proxy-csr.json

4.2.3.拷貝證書至各運算節點，並建立配置

hdss7-21上

4.2.3.1.拷貝證書,私鑰，注意私鑰文件屬性600
[root@hdss7-21 cert]# scp hdss7-200:/opt/certs/kube-proxy-client.pem .
[root@hdss7-21 cert]# scp hdss7-200:/opt/certs/kube-proxy-client-key.pem .
[root@hdss7-21 cert]# ll
total 40
-rw------- 1 root root 1675 Nov 17 09:10 kube-proxy-client-key.pem
-rw-r--r-- 1 root root 1375 Nov 17 09:10 kube-proxy-client.pem
4.2.3.2.建立配置

注意必須在conf目錄下，不然報錯

4.2.3.2.1.set-cluster
[root@hdss7-21 conf]# kubectl config set-cluster myk8s \
--certificate-authority=/opt/kubernetes/server/bin/cert/ca.pem \
--embed-certs=true \
--server=https://10.4.7.10:7443 \
--kubeconfig=kube-proxy.kubeconfig

返回結果：
Cluster "myk8s" set.
4.2.3.2.2.set-credentials
[root@hdss7-21 conf]#  kubectl config set-credentials kube-proxy \
  --client-certificate=/opt/kubernetes/server/bin/cert/kube-proxy-client.pem \
  --client-key=/opt/kubernetes/server/bin/cert/kube-proxy-client-key.pem \
  --embed-certs=true \
  --kubeconfig=kube-proxy.kubeconfig
  
  返回結果：
  User "kube-proxy" set.
4.2.3.2.3.set-context
[root@hdss7-21 conf]# kubectl config set-context myk8s-context \
--cluster=myk8s \
--user=kube-proxy \
--kubeconfig=kube-proxy.kubeconfig

返回結果：
Context "myk8s-context" created.
4.2.3.2.4.use-context
[root@hdss7-21 conf]# kubectl config use-context myk8s-context --kubeconfig=kube-proxy.kubeconfig

返回結果
Switched to context "myk8s-context".
4.2.3.2.5.拷貝kube-proxy.kubeconfig 到 hdss7-22的conf目錄下
[root@hdss7-22 conf]# scp hdss7-21:/opt/kubernetes/server/bin/conf/kube-proxy.kubeconfig .

4.2.4.建立kube-proxy啓動腳本

hdss7-21上

4.2.4.1.加載ipvs模塊
[root@hdss7-21 bin]# lsmod |grep ip_vs
[root@hdss7-21 bin]# vi /root/ipvs.sh
#!/bin/bash
ipvs_mods_dir="/usr/lib/modules/$(uname -r)/kernel/net/netfilter/ipvs"
for i in $(ls $ipvs_mods_dir|grep -o "^[^.]*")
do
  /sbin/modinfo -F filename $i &>/dev/null
  if [ $? -eq 0 ];then
    /sbin/modprobe $i
  fi
done    


[root@hdss7-21 bin]# chmod +x /root/ipvs.sh 
[root@hdss7-21 bin]# sh /root/ipvs.sh 

[root@hdss7-21 bin]# lsmod |grep ip_vs
ip_vs_wrr              12697  0 
ip_vs_wlc              12519  0 
ip_vs_sh               12688  0 
ip_vs_sed              12519  0 
......
4.2.4.2.建立啓動腳本
[root@hdss7-21 bin]# vi /opt/kubernetes/server/bin/kube-proxy.sh
#!/bin/sh
./kube-proxy \
  --cluster-cidr 172.7.0.0/16 \
  --hostname-override hdss7-21.host.com \
  --proxy-mode=ipvs \
  --ipvs-scheduler=nq \
  --kubeconfig ./conf/kube-proxy.kubeconfig

4.2.5.檢查配置，權限，建立日誌目錄

[root@hdss7-22 bin]# ls -l /opt/kubernetes/server/bin/conf/|grep kube-proxy
-rw------- 1 root root 6215 Nov 17 01:22 kube-proxy.kubeconfig

[root@hdss7-22 bin]# chmod +x /opt/kubernetes/server/bin/kube-proxy.sh 
[root@hdss7-22 bin]# mkdir -p /data/logs/kubernetes/kube-proxy

4.2.6.建立supervisor配置

[root@hdss7-21 bin]# vi /etc/supervisord.d/kube-proxy.ini
[program:kube-proxy-7-21]
command=/opt/kubernetes/server/bin/kube-proxy.sh                     ; the program (relative uses PATH, can take args)
numprocs=1                                                           ; number of processes copies to start (def 1)
directory=/opt/kubernetes/server/bin                                 ; directory to cwd to before exec (def no cwd)
autostart=true                                                       ; start at supervisord start (default: true)
autorestart=true                                                     ; retstart at unexpected quit (default: true)
startsecs=30                                                         ; number of secs prog must stay running (def. 1)
startretries=3                                                       ; max # of serial start failures (default 3)
exitcodes=0,2                                                        ; 'expected' exit codes for process (default 0,2)
stopsignal=QUIT                                                      ; signal used to kill process (default TERM)
stopwaitsecs=10                                                      ; max num secs to wait b4 SIGKILL (default 10)
user=root                                                            ; setuid to this UNIX account to run the program
redirect_stderr=true                                                 ; redirect proc stderr to stdout (default false)
stdout_logfile=/data/logs/kubernetes/kube-proxy/proxy.stdout.log     ; stderr log path, NONE for none; default AUTO
stdout_logfile_maxbytes=64MB                                         ; max # logfile bytes b4 rotation (default 50MB)
stdout_logfile_backups=4                                             ; # of stdout logfile backups (default 10)
stdout_capture_maxbytes=1MB                                          ; number of bytes in 'capturemode' (default 0)
stdout_events_enabled=false                                          ; emit events on stdout writes (default false)

4.2.7.啓動服務並檢查

[root@hdss7-21 bin]# supervisorctl update
[root@hdss7-21 bin]# supervisorctl status
etcd-server-7-21                 RUNNING   pid 3270, uptime 1:22:21
kube-apiserver-7-21              RUNNING   pid 3273, uptime 1:22:21
kube-controller-manager-7-21     RUNNING   pid 3267, uptime 1:22:21
kube-kubelet-7-21                RUNNING   pid 3268, uptime 1:22:21
kube-proxy-7-21                  RUNNING   pid 19580, uptime 0:00:31
kube-scheduler-7-21              RUNNING   pid 3269, uptime 1:22:21

[root@hdss7-21 bin]# yum install ipvsadm -y
[root@hdss7-21 bin]# ipvsadm -Ln
IP Virtual Server version 1.2.1 (size=4096)
Prot LocalAddress:Port Scheduler Flags
  -> RemoteAddress:Port           Forward Weight ActiveConn InActConn
TCP  192.168.0.1:443 nq
  -> 10.4.7.21:6443               Masq    1      0          0         
  -> 10.4.7.22:6443               Masq    1      0          0   
  
  
[root@hdss7-21 bin]# kubectl get svc
NAME         TYPE        CLUSTER-IP    EXTERNAL-IP   PORT(S)   AGE
kubernetes   ClusterIP   192.168.0.1   <none>        443/TCP   7h11m

4.2.8.安裝部署啓動檢查全部集羣規劃主機

hdss7-22 跟上述基本相同
/etc/supervisord.d/kube-proxy.ini
須要更改爲[program:kube-proxy-7-21]

/opt/kubernetes/server/bin/kube-proxy.sh
須要改爲 --hostname-override hdss7-22.host.com

5.驗證kubernetes集羣

5.1.在任意一個運算節點，建立一個資源配置清單

這裏選擇hdss7-21主機

[root@hdss7-21 ~]# vi /root/nginx-ds.yaml
apiVersion: extensions/v1beta1
kind: DaemonSet
metadata:
  name: nginx-ds
spec:
  template:
    metadata:
      labels:
        app: nginx-ds
    spec:
      containers:
      - name: my-nginx
        image: harbor.od.com/public/nginx:v1.7.9
        ports:
        - containerPort: 80

5.2.應用資源配置，並檢查

5.2.1.hdss7-21上的操做

[root@hdss7-21 bin]# kubectl create -f /root/nginx-ds.yaml

返回結果：
daemonset.extensions/nginx-ds created



[root@hdss7-21 bin]# kubectl get pods
NAME             READY   STATUS    RESTARTS   AGE
nginx-ds-mcvxt   1/1     Running   0          8h
nginx-ds-zsnz9   1/1     Running   0          8h


[root@hdss7-21 bin]# kubectl get pods -o wide
NAME             READY   STATUS    RESTARTS   AGE   IP           NODE                NOMINATED NODE   READINESS GATES
nginx-ds-mcvxt   1/1     Running   0          8h    172.7.21.2   hdss7-21.host.com   <none>           <none>
nginx-ds-zsnz9   1/1     Running   0          8h    172.7.22.2   hdss7-22.host.com   <none>           <none>

[root@hdss7-21 bin]# curl 172.7.21.2
<!DOCTYPE html>
<html>
<head>
<title>Welcome to nginx!</title>

[root@hdss7-21 bin]# curl 172.7.22.2
^C   
//curl 不到？
緣由是跨宿主機，docker容器還不能通訊，下篇：flannel解決這個問題

5.2.2.hdss7-22上的操做

[root@hdss7-22 bin]# kubectl get pods -o wide
NAME             READY   STATUS    RESTARTS   AGE     IP           NODE                NOMINATED NODE   READINESS GATES
nginx-ds-mcvxt   1/1     Running   0          6m45s   172.7.21.2   hdss7-21.host.com   <none>           <none>
nginx-ds-zsnz9   1/1     Running   0          6m45s   172.7.22.2   hdss7-22.host.com   <none>           <none>
[root@hdss7-22 bin]# curl 172.7.22.2
<!DOCTYPE html>
<html>
<head>
<title>Welcome to nginx!</title>

[root@hdss7-22 bin]# curl 172.7.21.2
^C
//curl 不到，上述已有解釋

5.2.3.查看kubernetes集羣上篇是否搭建好

[root@hdss7-21 bin]# kubectl get cs
NAME                 STATUS    MESSAGE              ERROR
controller-manager   Healthy   ok                   
scheduler            Healthy   ok                   
etcd-1               Healthy   {"health": "true"}   
etcd-2               Healthy   {"health": "true"}   
etcd-0               Healthy   {"health": "true"} 


[root@hdss7-21 bin]# kubectl get node
NAME                STATUS   ROLES         AGE   VERSION
hdss7-21.host.com   Ready    master,node   9h    v1.15.2
hdss7-22.host.com   Ready    master,node   10h   v1.15.2

[root@hdss7-21 bin]# kubectl get pods
NAME             READY   STATUS    RESTARTS   AGE
nginx-ds-mcvxt   1/1     Running   0          8h
nginx-ds-zsnz9   1/1     Running   0          8h

5.2.4.FAQ:

5.2.4.1.：kube-proxy啓動以後，用不了ipvs模式，查看日誌發現以下報錯
E1111 12:27:38.031263   23086 server_others.go:259] can't determine whether to use ipvs proxy, error: error getting ipset version, error: executable file not found in $PATH
W1111 12:27:38.049355   23086 node.go:113] Failed to retrieve node info: Get https://10.4.7.10:7443/api/v1/nodes/hdss7-21.host.com: EOF

yum install   ipset  -y，用supervisor重啓服務，問題解決
相關文章
相關標籤/搜索
每日一句
    每一个你不满意的现在，都有一个你没有努力的曾经。
本站公眾號
   歡迎關注本站公眾號,獲取更多信息
聯繫我們 最近搜索 最新文章 沪ICP备13005482号-10 MyBatis教程 SQL 教程 MySQL教程 Java 教程 Thymeleaf 教程 Hibernate教程 Spring教程 Redis教程