Aruba 650 OS從6.1.1.0升級到6.1.3.5

 升級的目的 :git

酒店部署AP93H系列AP,因爲AP93H須要控制器版本在6.1.3及以ide

上而控制器版本不支持,IP雖正常獲取,仍沒法註冊到控制器之上。ui

AP93H在更新系統這一步沒法經過!spa

AP93H 啓動報錯提示 :rest

 

SAPD: Reboot after p_w_picpath upgrade failed: 65280rem

shutting down watchdog process (nanny will restart it)...部署

  <<<<<       Welcome to the Access Point     >>>>>get

~ # cert_cap=0flash

The system is going down NOW !!it

Sending SIGTERM to all processes.

Please stand by while rebooting the system.

Restarting system.

這時候懷疑控制器系統版本存在問題!

 

開始準備工做 :

 

事先準備好Aruba OS軟件,並準備好控制器和分區,

因爲當前控制器是從0:0分區啓動所以將系統copy到0:1中

以免影響到當前控制器的正常運行,形成沒必要要的損失!

 

升級工做 :

使用FTP升級失敗 :  (多個FTP軟件均無效)

 
(Aruba650) #copy ftp: 192.168.5.180 admin ArubaOS_6xx_6.1.3.5_35523.5_35523 system: partition 1 
Password:******
Copying file:............................................................................................................................................................................................................................................................................................................................................................................................................
Error upgrading p_w_picpath: ncftpget: cannot open 192.168.5.180: could not connect to remote host, but can try again.
不知有誰知道爲什麼?
 
 
使用TFTP升級成功 :
 
(Aruba650) #copy tftp: 192.168.5.180 ArubaOS_6xx_6.1.3.5_35523.5_35523 system: partition 1 
Copying file:....................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................
File copied successfully.
Saving file to flash:
................................................................................................................................................................................................................................................................................................................................................
The system will boot from partition 1 during the next reboot.
(Aruba650) #show p_w_picpath version 
----------------------------------
Partition               : 0:0 (/dev/mtdblock9)
Software Version        : ArubaOS 6.1.1.0 (Digitally Signed - Production Build)
Build number            : 28288
Label                   : 28288
Built on                : Wed May 11 12:17:33 PDT 2011
----------------------------------
Partition               : 0:1 (/dev/mtdblock10) **Default boot**
Software Version        : ArubaOS 6.1.3.5 (Digitally Signed - Production Build)
Build number            : 35523
Label                   : 35523
Built on                : Fri Sep 28 07:46:05 PDT 2012
 
(Aruba650) #reload
升級完成
 
升級完成後,之前使用過的AP都在6.1.1.0版本上註冊過,AP的OS與6.1.1.0相匹配,
如今升級到新的系統版本,意味着AP與控制器版本不相匹配,所以全部的AP都要從新
升級OS後,才能正常註冊到控制器上!
 
結果 :
通過系統更新,全部AP正常註冊到控制器上(包括AP93H)!
相關文章
相關標籤/搜索