【Camera專題】Qcom-Camera驅動框架淺析(Hal層->Driver層)

時間  2019-12-06
標籤 Camera專題 qcom camera 驅動 框架 淺析 hal driver 简体版
原文   原文鏈接

一、前言

本文主要研究高通平臺Camera驅動和HAL層代碼架構，熟悉高通Camera的控制流程。 平臺：Qcom-高通平臺 Hal版本：【HAL1】 知識點以下： 從HAL層到driver層：研究Camera如下內容 1.打開(open)流程 2.預覽(preview)流程 3.拍照(tackPicture)流程node

二、Camera軟件架構

camera軟件架構

由上圖能夠看出，Android Camera 框架是 client/service 的架構,linux

  • 1.有兩個進程:android

    **client 進程：**能夠當作是 AP 端,主要包括 JAVA 代碼與一些 native c/c++代碼;c++

    **service 進 程：」**屬於服務端,是 native c/c++代碼,主要負責和 linux kernel 中的 camera driver 交互,蒐集 linuxkernel 中 cameradriver 傳上來的數據,並交給顯示系統SurfaceFlinger顯示。緩存

client 進程與 service 進程經過 Binder 機制通訊, client 端經過調用 service 端的接口實現各個具體的功能。bash

  • 2.最下面的是kernel層的驅動，其中按照V4L2架構實現了camera sensor等驅動，向用戶空間提供/dev/video0節點，這些設備節點文件，把操做設備的接口暴露給用戶空間。session

  • 3.在往上是HAL層，高通代碼實現了對/dev/video0的基本操做，對接了android的camera相關的interface。架構

2.1 Camera的open流程

2.1.1 Hal層

Android中Camera的調用流程, 基本是 Java -> JNI -> Service -> HAL -> 驅動層。app

frameworks/av/services/camera/libcameraservice/device1/CameraHardwareInterface.h框架

status_t initialize(CameraModule *module) {
···
	rc = module->open(mName.string(), (hw_device_t **)&mDevice);
···
}
複製代碼

這裏調用module->open開始調用到HAL層，那調用的是哪一個方法呢？ 咱們繼續往下看:

hardware/qcom/camera/QCamera2/HAL/wrapper/QualcommCamera.cpp

static hw_module_methods_t camera_module_methods = {
    open: camera_device_open,
};
複製代碼

其實是調用了camera_device_open函數，爲了對調用流程更加清晰的認識， 我畫了一張流程圖(畫圖工具:processon):

open流程
open流程圖已經很清晰明瞭，咱們關注一些重點函數： 在HAL層的 module->open(mName.string(), (hw_device_t **)&mDevice)層層調用，最終會調用到函數mm_camera_open(cam_obj);

hardware/qcom/camera/QCamera2/HAL/core/src/QCameraHWI.cpp

QCameraHardwareInterface::QCameraHardwareInterface(int cameraId, int mode)
{
···
/* Open camera stack! */
	mCameraHandle=camera_open(mCameraId, &mem_hooks);
    //Preview
    result = createPreview();
    //Record
    result = createRecord();
    //Snapshot
    result = createSnapshot();
    /* launch jpeg notify thread and raw data proc thread */
    mNotifyTh = new QCameraCmdThread();
    mDataProcTh = new QCameraCmdThread();
···
}
複製代碼

分析：new QCameraHardwareInterface()進行初始化：主要作了如下動做：

  • 1.打開camera
  • 2.creat preview stream、record stream、snapshot stream
  • 3.建立2個線程(jpeg notify thread和raw data proc thread)

hardware/qcom/camera/QCamera2/stack/mm-camera-interface/src/mm_camera.c

int32_t mm_camera_open(mm_camera_obj_t *my_obj)
{
···
	my_obj->ctrl_fd = open(dev_name, O_RDWR | O_NONBLOCK);
···

}
複製代碼

  在V4L2框架中，Camera被看作一個視頻設備，使用open函數打開這個設備：這裏以阻塞模式打開Camera。

1. 用非阻塞模式打開攝像頭設備

cameraFd = open("/dev/video0", O_RDWR | O_NONBLOCK);

2. 若是用阻塞模式打開攝像頭設備，上述代碼變爲：

cameraFd = open("/dev/video0", O_RDWR);

ps:關於阻塞模式和非阻塞模式

應用程序可以使用阻塞模式或非阻塞模式打開視頻設備，若是使用非阻塞模式調用視頻設備，
即便還沒有捕獲到信息，驅動依舊會把緩存（DQBUFF）裏的東西返回給應用程序。
複製代碼

那麼，接下來就會調用到Kernel層的代碼

2.1.2Kernel層

kernel/drivers/media/platform/msm/camera_v2/msm.c

static struct v4l2_file_operations msm_fops = {
  .owner  = THIS_MODULE,
  .open   = msm_open,
  .poll   = msm_poll,
  .release = msm_close,
  .ioctl   = video_ioctl2,
#ifdef CONFIG_COMPAT
  .compat_ioctl32 = video_ioctl2,
#endif
};
複製代碼

其實是調用了msm_open這個函數，咱們跟進去看：

static int msm_open(struct file *filep)
{
···
   /* !!! only ONE open is allowed !!! */
   if (atomic_cmpxchg(&pvdev->opened, 0, 1))
       return -EBUSY;

   spin_lock_irqsave(&msm_pid_lock, flags);
   msm_pid = get_pid(task_pid(current));
   spin_unlock_irqrestore(&msm_pid_lock, flags);

   /* create event queue */
   rc = v4l2_fh_open(filep);
   if (rc  < 0)
       return rc;

   spin_lock_irqsave(&msm_eventq_lock, flags);
   msm_eventq = filep->private_data;
   spin_unlock_irqrestore(&msm_eventq_lock, flags);

   /* register msm_v4l2_pm_qos_request */
   msm_pm_qos_add_request();
···
}
複製代碼

分析： 經過調用v4l2_fh_open函數打開Camera,該函數會建立event隊列等進行一些其餘操做。

接下來咱們跟着log去看: camera open log

<3>[   12.526811] msm_camera_power_up type 1
<3>[   12.526818] msm_camera_power_up:1303 gpio set val 33
<3>[   12.528873] msm_camera_power_up index 6
<3>[   12.528885] msm_camera_power_up type 1
<3>[   12.528893] msm_camera_power_up:1303 gpio set val 33
<3>[   12.534954] msm_camera_power_up index 7
<3>[   12.534969] msm_camera_power_up type 1
<3>[   12.534977] msm_camera_power_up:1303 gpio set val 28
<3>[   12.540162] msm_camera_power_up index 8
<3>[   12.540177] msm_camera_power_up type 1
<3>[   ·
<3>[   ·
<3>[   ·
<3>[   12.562753] msm_sensor_match_id: read id: 0x5675 expected id 0x5675:
<3>[   12.562763] ov5675_back probe succeeded
<3>[   12.562771] msm_sensor_driver_create_i2c_v4l_subdev camera I2c probe succeeded
<3>[   12.564930] msm_sensor_driver_create_i2c_v4l_subdev rc 0 session_id 1
<3>[   12.565495] msm_sensor_driver_create_i2c_v4l_subdev:120
<3>[   12.565507] msm_camera_power_down:1455
<3>[   12.565514] msm_camera_power_down index 0
複製代碼

分析： 最終就是調用msm_camera_power_up上電，msm_sensor_match_id識別sensor id，調用ov5675_back probe()探測函數去完成匹配設備和驅動的工做，msm_camera_power_down下電！

到此 咱們的open流程就結束了！！！

2.2 Camera的preview流程

2.2.1 Hal層

hardware/qcom/camera/QCamera2/HAL/QCamera2HWI.cpp

int QCamera2HardwareInterface::startPreview()
{
···
    int32_t rc = NO_ERROR;
···
    rc = startChannel(QCAMERA_CH_TYPE_PREVIEW);
···
}
複製代碼

這裏調用startChannel(QCAMERA_CH_TYPE_PREVIEW)，開啓preview流。 接來下看我畫的一張流程圖:(Hal層)

Preview流程
關注一些重點函數: hardware/qcom/camera/QCamera2/HAL/QCameraChannel.cpp 

int32_t QCameraChannel::start()
{
···
	mStreams[i]->start();//流程1
···
	rc = m_camOps->start_channel(m_camHandle, m_handle);//流程2
···
}
複製代碼

進入QCameraChannel::start()函數開始執行兩個流程，分別是 mStreams[i]->start()和m_camOps->start_channel(m_camHandle, m_handle);

流程1：mStreams[i]->start()

1.經過mProcTh.launch(dataProcRoutine, this)開啓新線程
2.執行CAMERA_CMD_TYPE_DO_NEXT_JOB分支，
3.從mDataQ隊列中取出數據並放入mDataCB中,等待數據返回到對應的stream回調中去，
4.最後向kernel請求數據；
複製代碼

流程2：m_camOps->start_channel(m_camHandle, m_handle);

經過流程圖，咱們能夠清晰的看到，通過一系列複雜的調用用，
最後在mm_camera_channel.c中
調用mm_channel_start(mm_channel_t *my_obj)函數，
複製代碼

來看mm_channel_start作了什麼事情： hardware/qcom/camera/QCamera2/stack/mm-camera-interface/src/mm_camera_channel.c

int32_t mm_channel_start(mm_channel_t *my_obj)
{
···
	/* 須要發送cb，所以啓動線程 */
	/* 初始化superbuf隊列 */
	mm_channel_superbuf_queue_init(&my_obj->bundle.superbuf_queue);
	/* 啓動cb線程，經過cb調度superbuf中 */
	snprintf(my_obj->cb_thread.threadName, THREAD_NAME_SIZE, "CAM_SuperBuf");
	mm_camera_cmd_thread_launch(&my_obj->cb_thread,
                                    mm_channel_dispatch_super_buf,
                                    (void*)my_obj);
	/* 啓動 cmd 線程，做爲superbuf接收數據的回調函數*/
	snprintf(my_obj->cmd_thread.threadName, THREAD_NAME_SIZE, "CAM_SuperBufCB");
	mm_camera_cmd_thread_launch(&my_obj->cmd_thread,
                            	mm_channel_process_stream_buf,
                            	(void*)my_obj);
	/* 爲每一個strean分配 buf */
	/*allocate buf*/
	rc = mm_stream_fsm_fn(s_objs[i],
                              MM_STREAM_EVT_GET_BUF,
                              NULL,
                              NULL);
	/* reg buf */
	rc = mm_stream_fsm_fn(s_objs[i],
                              MM_STREAM_EVT_REG_BUF,
                              NULL,
                              NULL);
	/* 開啓 stream */
	rc = mm_stream_fsm_fn(s_objs[i],
                              MM_STREAM_EVT_START,
                              NULL,
                              NULL);
···
}
複製代碼

過程包括：

  • 1.建立cb thread，cmd thread線程以及
  • 2.爲每一個stream分配buf
  • 3.開啓stream； 咱們繼續關注開啓stream後的流程： rc = mm_stream_fsm_fn(s_objs[i],MM_STREAM_EVT_START,NULL,NULL); 調用到 rc = mm_stream_fsm_reg(my_obj, evt, in_val, out_val) hardware/qcom/camera/QCamera2/stack/mm-camera-interface/src/mm_camera_stream.c
int32_t mm_stream_fsm_reg(···)
{
···
	case MM_STREAM_EVT_START:
		rc = mm_stream_streamon(my_obj);
···
}
複製代碼

在mm_camera_stream.c中調用mm_stream_streamon(mm_stream_t *my_obj)函數.

向kernel發送v4l2請求，等待數據回調

int32_t mm_stream_streamon(mm_stream_t *my_obj)
{
···
    enum v4l2_buf_type buf_type = V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE;
···
    rc = ioctl(my_obj->fd, VIDIOC_STREAMON, &buf_type);  
···
}
複製代碼

2.2.2 Kernel層

kernel/drivers/media/platform/msm/camera_v2/camera/camera.c 經過ioctl的方式，通過層層調用，最後調用到camera_v4l2_streamon();

static int camera_v4l2_streamon(struct file *filep, void *fh,
    enum v4l2_buf_type buf_type)
{
    struct v4l2_event event;
    int rc; 
    struct camera_v4l2_private *sp = fh_to_private(fh);

    rc = vb2_streamon(&sp->vb2_q, buf_type);
    camera_pack_event(filep, MSM_CAMERA_SET_PARM,
        MSM_CAMERA_PRIV_STREAM_ON, -1, &event);

    rc = msm_post_event(&event, MSM_POST_EVT_TIMEOUT);
···
    rc = camera_check_event_status(&event);
    return rc; 
}
複製代碼

分析:經過msm_post_event發生數據請求，等待數據回調。

Preview完整流程圖

Preview完整流程圖

到此，preview預覽流程結束

2.3 Camera的tackPicture流程

事實上，tackPicture流程和preview的流程很相似！

以ZSL模式(零延遲模式)爲切入點：

2.3.1 Hal層

hardware/qcom/camera/QCamera2/HAL/QCamera2HWI.cpp

int QCamera2HardwareInterface::takePicture()
{
···
	//流程1
	mCameraHandle->ops->start_zsl_snapshot(mCameraHandle->camera_handle,
	        pZSLChannel->getMyHandle());
···
	//流程2
	 rc = pZSLChannel->takePicture(numSnapshots);
···
}

複製代碼

進入QCamera2HardwareInterface::takePicture後，會走2個流程：

  • 1.mCameraHandle->ops->start_zsl_snapshot(···);

  • 2.pZSLChannel->takePicture(numSnapshots);

流程1：

通過層層調用，最終會調用到mm_channel_start_zsl_snapshot hardware/qcom/camera/QCamera2/stack/mm-camera-interface/src/mm_camera_channel.c

int32_t mm_channel_start_zsl_snapshot(mm_channel_t *my_obj)
{
    int32_t rc = 0; 
    mm_camera_cmdcb_t* node = NULL;

    node = (mm_camera_cmdcb_t *)malloc(sizeof(mm_camera_cmdcb_t));
    if (NULL != node) {
        memset(node, 0, sizeof(mm_camera_cmdcb_t));
        node->cmd_type = MM_CAMERA_CMD_TYPE_START_ZSL;

        /* enqueue to cmd thread */
        cam_queue_enq(&(my_obj->cmd_thread.cmd_queue), node);

        /* wake up cmd thread */
        cam_sem_post(&(my_obj->cmd_thread.cmd_sem));
    } else {
        CDBG_ERROR("%s: No memory for mm_camera_node_t", __func__);
        rc = -1;
    }

    return rc;
}

複製代碼

分析: 該函數主要作了2件事情:

  • 1 cam_queue_enq(&(my_obj->cmd_thread.cmd_queue), node);入隊
  • 2 經過cam_sem_post(&(my_obj->cmd_thread.cmd_sem));喚醒cmd線程

這裏的node->cmd_type=MM_CAMERA_CMD_TYPE_START_ZSL

hardware/qcom/camera/QCamera2/stack/mm-camera-interface/src/mm_camera_thread.c

static void *mm_camera_cmd_thread(void *data)
{
···
	  case MM_CAMERA_CMD_TYPE_START_ZSL:
	  	 cmd_thread->cb(node, cmd_thread->user_data);
···
}
複製代碼

這裏cmd_thread->cb是回調函數： cmd_thread->cb = mm_channel_process_stream_buf，通過層層複雜的回調 最終: mm_channel_superbuf_skip(ch_obj, &ch_obj->bundle.superbuf_queue); super_buf = (mm_channel_queue_node_t*)node->data; 將buffer 取出 且釋放list中的node，最終將buffer queue給kernel進行下一次填充.

流程2：

一樣，通過層層調用，最終調用到mm_channel_request_super_buf

hardware/qcom/camera/QCamera2/stack/mm-camera-interface/src/mm_camera_channel.c

int32_t mm_channel_request_super_buf(mm_channel_t *my_obj, uint32_t num_buf_requested)
{
    /* set pending_cnt
     * will trigger dispatching super frames if pending_cnt > 0 */
    /* send cam_sem_post to wake up cmd thread to dispatch super buffer */
    node = (mm_camera_cmdcb_t *)malloc(sizeof(mm_camera_cmdcb_t));
    if (NULL != node) {
        memset(node, 0, sizeof(mm_camera_cmdcb_t));
        node->cmd_type = MM_CAMERA_CMD_TYPE_REQ_DATA_CB;
        node->u.req_buf.num_buf_requested = num_buf_requested;

        /* enqueue to cmd thread */
        cam_queue_enq(&(my_obj->cmd_thread.cmd_queue), node);

        /* wake up cmd thread */
        cam_sem_post(&(my_obj->cmd_thread.cmd_sem));
    } else {
        CDBG_ERROR("%s: No memory for mm_camera_node_t", __func__);
        rc = -1;
    }

    return rc;
}
複製代碼

分析:該函數和流程1同樣:

  • 1 cam_queue_enq(&(my_obj->cmd_thread.cmd_queue), node);入隊
  • 2 經過cam_sem_post(&(my_obj->cmd_thread.cmd_sem));喚醒cmd線程
static void *mm_camera_cmd_thread(void *data)
{
···
	  case MM_CAMERA_CMD_TYPE_START_ZSL:
	  case MM_CAMERA_CMD_TYPE_REQ_DATA_CB:
	  	 cmd_thread->cb(node, cmd_thread->user_data);
···
}
複製代碼

這裏和流程1同樣，就再也不贅述!

2.3.2 Kernel層

int32_t mm_camera_start_zsl_snapshot(mm_camera_obj_t *my_obj)
{
···
    rc = mm_camera_util_s_ctrl(my_obj->ctrl_fd,
             CAM_PRIV_START_ZSL_SNAPSHOT, &value);
···
}
複製代碼
int32_t mm_camera_util_s_ctrl(int32_t fd,  uint32_t id, int32_t *value)
{
···
    rc = ioctl(fd, VIDIOC_S_CTRL, &control);
···
}
複製代碼
kernel/drivers/media/v4l2-core/v4l2-subdev.c
static long subdev_do_ioctl(struct file *file, unsigned int cmd, void *arg)
{
···
	case VIDIOC_S_CTRL:
		return v4l2_s_ctrl(vfh, vfh->ctrl_handler, arg);
···
}
複製代碼

經過ioctl(fd, VIDIOC_S_CTRL, &control)的方式，藉助V4L2框架，調用到kernel層，

最終buffer queue給kernel進行下一次填充。

takePicture完整流程圖

takePicture完整流程圖

Stay hungry，Stay foolish！

相關文章
相關標籤/搜索
每日一句
    每一个你不满意的现在，都有一个你没有努力的曾经。
本站公眾號
   歡迎關注本站公眾號,獲取更多信息
聯繫我們 最近搜索 最新文章 沪ICP备13005482号-10 MyBatis教程 SQL 教程 MySQL教程 Java 教程 Thymeleaf 教程 Hibernate教程 Spring教程 Redis教程