php-fpm配置筆記

Posted on 2013 年 2 月 27 日 3,070 Views

不得不說,英文很差弄linux服務器有時是挺痛苦的,苦逼的博主沒好好學習英文,致使被lnmp折騰的夠嗆.

 

php-fpm配置不當，致使服務器常常出現502錯誤，上個學期屢次調整都沒有解決，網上找來資料，大都是增長max_children，但是我都加到頂了，php-fpm log裏面仍是有大量的警告:

eems busy (you may need to increase pm.start_servers, or pm.min/max_spare_servers), spawning 16 children, there are 0 idle, and 88 total children

不想看英文,一看就頭暈,可是502更頭暈,特別是昨天,剛重啓了lnmp沒多久，容不得鬆口氣，就看到負載飆到20多，一開網站，又特麼502了。

硬着頭皮看默認配置裏面的英文註釋，才發現本身的三個參數配置貌似有至關大的問題：

Choose how the process manager will control the number of child processes.
; Possible Values:
; static - a fixed number (pm.max_children) of child processes;
; dynamic - the number of child processes are set dynamically based on the
; following directives. With this process management, there will be
; always at least 1 children.
; pm.max_children - the maximum number of children that can
; be alive at the same time.
; pm.start_servers - the number of children created on startup.
; pm.min_spare_servers - the minimum number of children in 'idle'
; state (waiting to process). If the number
; of 'idle' processes is less than this
; number then some children will be created.
; pm.max_spare_servers - the maximum number of children in 'idle'
; state (waiting to process). If the number
; of 'idle' processes is greater than this
; number then some children will be killed.
; ondemand - no children are created at startup. Children will be forked when
; new requests will connect. The following parameter are used:
; pm.max_children - the maximum number of children that
; can be alive at the same time.
; pm.process_idle_timeout - The number of seconds after which
; an idle process will be killed.
; Note: This value is mandatory.

 

; The number of child processes to be created when pm is set to 'static' and the
; maximum number of child processes when pm is set to 'dynamic' or 'ondemand'.
; This value sets the limit on the number of simultaneous requests that will be
; served. Equivalent to the ApacheMaxClients directive with mpm_prefork.
; Equivalent to the PHP_FCGI_CHILDREN environment variable in the original PHP
; CGI. The below defaults are based on a server without much resources. Don't
; forget to tweak pm.* to fit your needs.
; Note: Used when pm is set to 'static', 'dynamic' or 'ondemand'
; Note: This value is mandatory.
pm.max_children = 5
; The number of child processes created on startup.
; Note: Used only when pm is set to 'dynamic'
; Default Value: min_spare_servers + (max_spare_servers - min_spare_servers) / 2
pm.start_servers = 2
; The desired minimum number of idle server processes.
; Note: Used only when pm is set to 'dynamic'
; Note: Mandatory when pm is set to 'dynamic'
pm.min_spare_servers = 1
; The desired maximum number of idle server processes.
; Note: Used only when pm is set to 'dynamic'
; Note: Mandatory when pm is set to 'dynamic'
pm.max_spare_servers = 3

 

註釋上貌似是說,static模式時,只有pm.max_children生效，dynamic模式時,pm.max_children依然生效，另外:

pm.start_server #控制服務啓動時建立的進程數,

pm.min_spare_servers #控制最小備用進程數

pm.max_spare_servers #最大備用進程數

spare_servers翻譯成備用進程，不知道合適不適合，若是真這樣，那我以前的配置就讓人無奈了: pm.min_space_servers 20,pm.max_spare_servers 80，pm.max_children 80，會不會是由於備用的太多才致使502呢？

 

另外，下面的具體配置裏面，註釋中給出了計算pm.start_servers默認值的公式：

Default Value: min_spare_servers + (max_spare_servers - min_spare_servers) / 2

按這個公式,我以前的pm.start_servers應該是 20+(80-20)/2=50，但是我當時設置的是20…

從新規劃以下:

pm = dynamic pm.max_children =80 pm.start_servers = 12 pm.min_spare_servers = 4 pm.max_spare_servers = 20 rlimit_files = 65535 pm.max_requests = 102400