spring cloud gateway集成hystrix實戰

本文主要研究一下spring cloud gateway如何集成hystrixhtml

maven

<dependency>
            <groupId>org.springframework.cloud</groupId>
            <artifactId>spring-cloud-starter-netflix-hystrix</artifactId>
        </dependency>

添加spring-cloud-starter-netflix-hystrix依賴,開啓hystrixjava

配置實例

hystrix.command.fallbackcmd.execution.isolation.thread.timeoutInMilliseconds: 5000
spring:
  cloud:
    gateway:
      discovery:
        locator:
          enabled: true
      routes:
      - id: employee-service
        uri: lb://employee-service
        predicates:
        - Path=/employee/**
        filters:
        - RewritePath=/employee/(?<path>.*), /$\{path}
        - name: Hystrix
          args:
            name: fallbackcmd
            fallbackUri: forward:/fallback
  • 首先filter裏頭配置了name爲Hystrix的filter,實際是對應HystrixGatewayFilterFactory
  • 而後指定了hystrix command的名稱,及fallbackUri,注意fallbackUri要以forward開頭
  • 最後經過hystrix.command.fallbackcmd.execution.isolation.thread.timeoutInMilliseconds指定該command的超時時間

fallback實例

@RestController
@RequestMapping("/fallback")
public class FallbackController {

    @RequestMapping("")
    public String fallback(){
        return "error";
    }
}

源碼解析

GatewayAutoConfiguration

spring-cloud-gateway-core-2.0.0.RC2-sources.jar!/org/springframework/cloud/gateway/config/GatewayAutoConfiguration.javareact

@Configuration
@ConditionalOnProperty(name = "spring.cloud.gateway.enabled", matchIfMissing = true)
@EnableConfigurationProperties
@AutoConfigureBefore(HttpHandlerAutoConfiguration.class)
@AutoConfigureAfter({GatewayLoadBalancerClientAutoConfiguration.class, GatewayClassPathWarningAutoConfiguration.class})
@ConditionalOnClass(DispatcherHandler.class)
public class GatewayAutoConfiguration {
    //......
	@Configuration
	@ConditionalOnClass({HystrixObservableCommand.class, RxReactiveStreams.class})
	protected static class HystrixConfiguration {
		@Bean
		public HystrixGatewayFilterFactory hystrixGatewayFilterFactory(DispatcherHandler dispatcherHandler) {
			return new HystrixGatewayFilterFactory(dispatcherHandler);
		}
	}  
    //......
}

引入spring-cloud-starter-netflix-hystrix類庫,就有HystrixObservableCommand.class, RxReactiveStreams.class,便開啓HystrixConfigurationspring

HystrixGatewayFilterFactory

spring-cloud-gateway-core-2.0.0.RC2-sources.jar!/org/springframework/cloud/gateway/filter/factory/HystrixGatewayFilterFactory.javaapp

/**
 * Depends on `spring-cloud-starter-netflix-hystrix`, {@see http://cloud.spring.io/spring-cloud-netflix/}
 * @author Spencer Gibb
 */
public class HystrixGatewayFilterFactory extends AbstractGatewayFilterFactory<HystrixGatewayFilterFactory.Config> {

	public static final String FALLBACK_URI = "fallbackUri";

	private final DispatcherHandler dispatcherHandler;

	public HystrixGatewayFilterFactory(DispatcherHandler dispatcherHandler) {
		super(Config.class);
		this.dispatcherHandler = dispatcherHandler;
	}

	@Override
	public List<String> shortcutFieldOrder() {
		return Arrays.asList(NAME_KEY);
	}

	public GatewayFilter apply(String routeId, Consumer<Config> consumer) {
		Config config = newConfig();
		consumer.accept(config);

		if (StringUtils.isEmpty(config.getName()) && !StringUtils.isEmpty(routeId)) {
			config.setName(routeId);
		}

		return apply(config);
	}

	@Override
	public GatewayFilter apply(Config config) {
		//TODO: if no name is supplied, generate one from command id (useful for default filter)
		if (config.setter == null) {
			Assert.notNull(config.name, "A name must be supplied for the Hystrix Command Key");
			HystrixCommandGroupKey groupKey = HystrixCommandGroupKey.Factory.asKey(getClass().getSimpleName());
			HystrixCommandKey commandKey = HystrixCommandKey.Factory.asKey(config.name);

			config.setter = Setter.withGroupKey(groupKey)
					.andCommandKey(commandKey);
		}

		return (exchange, chain) -> {
			RouteHystrixCommand command = new RouteHystrixCommand(config.setter, config.fallbackUri, exchange, chain);

			return Mono.create(s -> {
				Subscription sub = command.toObservable().subscribe(s::success, s::error, s::success);
				s.onCancel(sub::unsubscribe);
			}).onErrorResume((Function<Throwable, Mono<Void>>) throwable -> {
				if (throwable instanceof HystrixRuntimeException) {
					HystrixRuntimeException e = (HystrixRuntimeException) throwable;
					if (e.getFailureType() == TIMEOUT) { //TODO: optionally set status
						setResponseStatus(exchange, HttpStatus.GATEWAY_TIMEOUT);
						return exchange.getResponse().setComplete();
					}
				}
				return Mono.error(throwable);
			}).then();
		};
	}
    //......
}

這裏建立了RouteHystrixCommand,將其轉換爲Mono,而後在onErrorResume的時候判斷若是HystrixRuntimeException的failureType是FailureType.TIMEOUT類型的話,則返回GATEWAY_TIMEOUT(504, "Gateway Timeout")狀態碼。maven

RouteHystrixCommand

//TODO: replace with HystrixMonoCommand that we write
	private class RouteHystrixCommand extends HystrixObservableCommand<Void> {

		private final URI fallbackUri;
		private final ServerWebExchange exchange;
		private final GatewayFilterChain chain;

		RouteHystrixCommand(Setter setter, URI fallbackUri, ServerWebExchange exchange, GatewayFilterChain chain) {
			super(setter);
			this.fallbackUri = fallbackUri;
			this.exchange = exchange;
			this.chain = chain;
		}

		@Override
		protected Observable<Void> construct() {
			return RxReactiveStreams.toObservable(this.chain.filter(exchange));
		}

		@Override
		protected Observable<Void> resumeWithFallback() {
			if (this.fallbackUri == null) {
				return super.resumeWithFallback();
			}

			//TODO: copied from RouteToRequestUrlFilter
			URI uri = exchange.getRequest().getURI();
			//TODO: assume always?
			boolean encoded = containsEncodedParts(uri);
			URI requestUrl = UriComponentsBuilder.fromUri(uri)
					.host(null)
					.port(null)
					.uri(this.fallbackUri)
					.build(encoded)
					.toUri();
			exchange.getAttributes().put(GATEWAY_REQUEST_URL_ATTR, requestUrl);

			ServerHttpRequest request = this.exchange.getRequest().mutate().uri(requestUrl).build();
			ServerWebExchange mutated = exchange.mutate().request(request).build();
			return RxReactiveStreams.toObservable(HystrixGatewayFilterFactory.this.dispatcherHandler.handle(mutated));
		}
	}
  • 這裏重寫了construct方法,RxReactiveStreams.toObservable(this.chain.filter(exchange)),將reactor的Mono轉換爲rxjava的Observable
  • 這裏重寫了resumeWithFallback方法,針對有fallbackUri的狀況,從新路由到fallbackUri的地址

Config

public static class Config {
		private String name;
		private Setter setter;
		private URI fallbackUri;

		public String getName() {
			return name;
		}

		public Config setName(String name) {
			this.name = name;
			return this;
		}

		public Config setFallbackUri(String fallbackUri) {
			if (fallbackUri != null) {
				setFallbackUri(URI.create(fallbackUri));
			}
			return this;
		}

		public URI getFallbackUri() {
			return fallbackUri;
		}

		public void setFallbackUri(URI fallbackUri) {
			if (fallbackUri != null && !"forward".equals(fallbackUri.getScheme())) {
				throw new IllegalArgumentException("Hystrix Filter currently only supports 'forward' URIs, found " + fallbackUri);
			}
			this.fallbackUri = fallbackUri;
		}

		public Config setSetter(Setter setter) {
			this.setter = setter;
			return this;
		}
	}

能夠看到Config校驗了fallbackUri,若是不爲null,則必須以forward開頭ide

小結

spring cloud gateway集成hystrix,分爲以下幾步:ui

  • 添加spring-cloud-starter-netflix-hystrix依賴
  • 在對應route的filter添加name爲Hystrix的filter,同時指定hystrix command的名稱,及其fallbackUri(可選)
  • 指定該hystrix command的超時時間等。

doc

相關文章
相關標籤/搜索