python+requests接口自動化框架

時間 2020-06-03

標籤 python+requests python requests 接口自動化框架欄目 Python 简体版

原文原文鏈接

爲何要作接口自動化框架

一、業務與配置的分離python

二、數據與程序的分離；數據的變動不影響程序面試

三、有日誌功能，實現無人值守數據庫

四、自動發送測試報告編程

五、不懂編程的測試人員也能夠進行測試json

正常接口測試的流程是什麼？

肯定接口測試使用的工具----->配置須要的接口參數----->進行測試----->檢查測試結果----->生成測試報告api

測試的工具：python+requests安全

接口測試用例：excel服務器

1、接口框架以下：

一、action包：用來存放關鍵字函數cookie

二、config包：用來存放配置文件數據結構

三、TestData：用來存放測試數據，excel表

四、Log包：用來存放日誌文件

五、utils包：用來存放公共的類

六、運行主程序interface_auto_test.py

七、Readme.txt：告訴團隊組員使用改框架須要注意的地方

2、接口的數據規範設計---Case設計

一個sheet對應數據庫裏面一張表

APIsheet存放
編號；從1開始
接口的名稱（APIName）；
請求的url（RequestUrl）；
請求的方法（RequestMethod）；
傳參的方式（paramsType）：post/get請求方法不同
用例說明（APITestCase）
是否執行（Active）部分接口已測通，下次不用測試，直接把這裏設置成N，跳過此接口

post與get的區別

查看post詳情

post請求參數通常是json串，參數放在from表單裏面；參數通常不可見，相對來講安全性高些

查看get詳情

get請求參數通常直接放在url裏面

2.1註冊接口用例

RequestData：請求的數據
（開發制定的傳參方式）
RelyData：數據依賴
ResponseCode：響應code
ResponseData：響應數據
DataStore：存儲的依賴數據；若是存在數據庫裏面，在表裏增長一個字段用來存依賴的數據
（存儲的方式是編寫接口自動化的人員來設定的存儲方式）
CheckPoint：檢查點
Active：是否執行
Status：執行用例的狀態，方便查看用例是否執行成功
ErrorInfo：case運行失敗，失敗的錯誤信息；eg：是也自己的緣由仍是case設置失敗，仍是其餘緣由

2.2登陸接口用例

RequestData：請求的數據
（開發制定的傳參方式）
RelyData：數據依賴
（存儲的方式是編寫接口自動化的人員來設定的存儲方式）
ResponseCode：響應code
ResponseData：響應數據
DataStore：存儲的依賴數據；若是存在數據庫裏面，在表裏增長一個字段用來存依賴的數據
（存儲的方式是編寫接口自動化的人員來設定的存儲方式）
CheckPoint：檢查點
Active：是否執行
Status：執行用例的狀態，方便查看用例是否執行成功
ErrorInfo：case運行失敗，失敗的錯誤信息；eg：是也自己的緣由仍是case設置失敗，仍是其餘緣由

重點說明下RelyData：數據依賴
採起的是字典：key:value來存儲數據格式；

{"request":{"username":"register->1","password":"register->1"},"response":{"code":"register->1"}}

格式化以後：

{
    "request":{
        "username":"register->1",
        "password":"register->1"
    },
    "response":{
        "code":"register->1"
    }
}

3、建立utils包：用來存放公共的類

3.1 ParseExcel.py 操做封裝excel的類（ParseExcel.py）

#encoding=utf-8
import openpyxl
from openpyxl.styles import Border, Side, Font
import time

class ParseExcel(object):

    def __init__(self):
        self.workbook = None
        self.excelFile = None
        self.font = Font(color = None) # 設置字體的顏色
        # 顏色對應的RGB值
        self.RGBDict = {'red': 'FFFF3030', 'green': 'FF008B00'}

    def loadWorkBook(self, excelPathAndName):
        # 將excel文件加載到內存，並獲取其workbook對象
        try:
            self.workbook = openpyxl.load_workbook(excelPathAndName)
        except Exception as err:
            raise err
        self.excelFile = excelPathAndName
        return self.workbook

    def getSheetByName(self, sheetName):
        # 根據sheet名獲取該sheet對象
        try:
            # sheet = self.workbook.get_sheet_by_name(sheetName)
            sheet = self.workbook[sheetName]
            return sheet
        except Exception as err:
            raise err

    def getSheetByIndex(self, sheetIndex):
        # 根據sheet的索引號獲取該sheet對象
        try:
            # sheetname = self.workbook.get_sheet_names()[sheetIndex]
            sheetname = self.workbook.sheetnames[sheetIndex]
        except Exception as err:
            raise err
        # sheet = self.workbook.get_sheet_by_name(sheetname)
        sheet = self.workbook[sheetname]
        return sheet

    def getRowsNumber(self, sheet):
        # 獲取sheet中有數據區域的結束行號
        return sheet.max_row

    def getColsNumber(self, sheet):
        # 獲取sheet中有數據區域的結束列號
        return sheet.max_column

    def getStartRowNumber(self, sheet):
        # 獲取sheet中有數據區域的開始的行號
        return sheet.min_row

    def getStartColNumber(self, sheet):
        # 獲取sheet中有數據區域的開始的列號
        return sheet.min_column

    def getRow(self, sheet, rowNo):
        # 獲取sheet中某一行,返回的是這一行全部的數據內容組成的tuple，
        # 下標從1開始，sheet.rows[1]表示第一行
        try:
            rows = []
            for row in sheet.iter_rows():
                rows.append(row)
            return rows[rowNo - 1]
        except Exception as err:
            raise err

    def getColumn(self, sheet, colNo):
        # 獲取sheet中某一列,返回的是這一列全部的數據內容組成tuple，
        # 下標從1開始，sheet.columns[1]表示第一列
        try:
            cols = []
            for col in sheet.iter_cols():
                cols.append(col)
            return cols[colNo - 1]
        except Exception as err:
            raise err

    def getCellOfValue(self, sheet, coordinate = None,
                       rowNo = None, colsNo = None):
        # 根據單元格所在的位置索引獲取該單元格中的值,下標從1開始,
        # sheet.cell(row = 1, column = 1).value，
        # 表示excel中第一行第一列的值
        if coordinate != None:
            try:
                return sheet[coordinate]
            except Exception as err:
                raise err
        elif coordinate is None and rowNo is not None and \
                        colsNo is not None:
            try:
                return sheet.cell(row = rowNo, column = colsNo).value
            except Exception as err:
                raise err
        else:
            raise Exception("Insufficient Coordinates of cell !")

    def getCellOfObject(self, sheet, coordinate = None,
                        rowNo = None, colsNo = None):
        # 獲取某個單元格的對象，能夠根據單元格所在位置的數字索引，
        # 也能夠直接根據excel中單元格的編碼及座標
        # 如getCellObject(sheet, coordinate = 'A1') or
        # getCellObject(sheet, rowNo = 1, colsNo = 2)
        if coordinate != None:
            try:
                # return sheet.cell(coordinate = coordinate)
                return sheet[coordinate]
            except Exception as err:
                raise err
        elif coordinate == None and rowNo is not None and \
                        colsNo is not None:
            try:
                return sheet.cell(row = rowNo,column = colsNo)
            except Exception as err:
                raise err
        else:
            raise Exception("Insufficient Coordinates of cell !")

    def writeCell(self, sheet, content, coordinate = None,
        rowNo = None, colsNo = None, style = None):
        #根據單元格在excel中的編碼座標或者數字索引座標向單元格中寫入數據，
        # 下標從1開始，參style表示字體的顏色的名字,好比red，green
        if coordinate is not None:
            try:
                # sheet.cell(coordinate = coordinate).value = content
                sheet[coordinate] = content
                if style is not None:
                    sheet[coordinate].\
                        font = Font(color = self.RGBDict[style])
                self.workbook.save(self.excelFile)
            except Exception as e:
                raise e
        elif coordinate == None and rowNo is not None and \
                        colsNo is not None:
            try:
                sheet.cell(row = rowNo,column = colsNo).value = content
                if style:
                    sheet.cell(row = rowNo,column = colsNo).\
                        font = Font(color = self.RGBDict[style])
                self.workbook.save(self.excelFile)
            except Exception as e:
                raise e
        else:
            raise Exception("Insufficient Coordinates of cell !")

    def writeCellCurrentTime(self, sheet, coordinate = None,
                rowNo = None, colsNo = None):
        # 寫入當前的時間，下標從1開始
        now = int(time.time())  #顯示爲時間戳
        timeArray = time.localtime(now)
        currentTime = time.strftime("%Y-%m-%d %H:%M:%S", timeArray)
        if coordinate is not None:
            try:
                sheet.cell(coordinate = coordinate).value = currentTime
                self.workbook.save(self.excelFile)
            except Exception as e:
                raise e
        elif coordinate == None and rowNo is not None \
                and colsNo is not None:
            try:
                sheet.cell(row = rowNo, column = colsNo
                        ).value = currentTime
                self.workbook.save(self.excelFile)
            except Exception as e:
                raise e
        else:
            raise Exception("Insufficient Coordinates of cell !")

if __name__ == '__main__':
    # 測試代碼
    pe = ParseExcel()
    pe.loadWorkBook(r'D:\ProgramSourceCode\Python Source Code\WorkSpace\InterfaceFrame2018\inter_test_data.xlsx')
    sheetObj = pe.getSheetByName(u"API")
    print("經過名稱獲取sheet對象的名字：", sheetObj.title)
    # print help(sheetObj.rows)
    print("經過index序號獲取sheet對象的名字：", pe.getSheetByIndex(0).title)
    sheet = pe.getSheetByIndex(0)
    print(type(sheet))
    print(pe.getRowsNumber(sheet))  #獲取最大行號
    print(pe.getColsNumber(sheet))  #獲取最大列號
    rows = pe.getRow(sheet, 1)  #獲取第一行
    for i in rows:
        print(i.value)
    # # 獲取第一行第一列單元格內容
    # print pe.getCellOfValue(sheet, rowNo = 1, colsNo = 1)
    # pe.writeCell(sheet, u'我愛祖國', rowNo = 10, colsNo = 10)
    # pe.writeCellCurrentTime(sheet, rowNo = 10, colsNo = 11)

3.2 封裝get/post請求（HttpClient.py）

import requests
import json

class HttpClient(object):
    def __init__(self):
        pass

    def request(self, requestMethod, requestUrl, paramsType,
                requestData, headers =None, **kwargs):
        if requestMethod == "post":
            print("---", requestData, type(requestData))
            if paramsType == "form":
                response = self.__post(url = requestUrl, data = json.dumps(eval(requestData)),
                                  headers = headers, **kwargs)
                return response
            elif paramsType == "json":
                response = self.__post(url = requestUrl, json = json.dumps(eval(requestData)),
                                  headers = headers, **kwargs)
                return response
        elif requestMethod == "get":
            request_url = requestUrl
            if paramsType == "url":
                request_url = "%s%s" %(requestUrl, requestData)
            response = self.__get(url = request_url, params = requestData, **kwargs)
            return response

    def __post(self, url, data = None, json = None, headers=None,**kwargs):
        print("----")
        response = requests.post(url=url, data = data, json=json, headers=headers)
        return response

    def __get(self, url, params = None, **kwargs):
        response = requests.get(url, params = params, **kwargs)
        return response

if __name__ == "__main__":
    hc = HttpClient()
    res = hc.request("get", "http://39.106.41.11:8080/getBlogContent/", "url",'2')
    print(res.json())

3.3 封裝MD5（md5_encrypt）

import hashlib

def md5_encrypt(text):
    m5 = hashlib.md5()
    m5.update(text.encode("utf-8"))
    value = m5.hexdigest()
    return value

if __name__ == "__main__":
    print(md5_encrypt("sfwe"))

3.4 封裝Log

import logging
import logging.config
from config.public_data import baseDir

# 讀取日誌配置文件
logging.config.fileConfig(baseDir + "\config\Logger.conf")
# 選擇一個日誌格式
logger = logging.getLogger("example02")#或者example01

def debug(message):
    # 定義dubug級別日誌打印方法
    logger.debug(message)

def info(message):
    # 定義info級別日誌打印方法
    logger.info(message)

def warning(message):
    # 定義warning級別日誌打印方法
    logger.warning(message)

3.5 封裝發送Email類

import smtplib
from email.mime.text import MIMEText
from email.mime.multipart import MIMEMultipart
from email.header import Header
from ProjVar.var import *

import os
import smtplib
from email import encoders
from email.mime.base import MIMEBase
from email.mime.text import MIMEText
from email.mime.multipart import MIMEMultipart
from email.header import Header
from email.utils import formataddr

def send_mail():
    mail_host="smtp.qq.com"  #設置服務器
    mail_user="xiangxiang"    #用戶名
    mail_pass="cmxx"   #口令
    sender = 'cm2019@126.com'
    receivers = ['672014873@qq.com',"cm2019@126.com"] # 接收郵件，可設置爲你的QQ郵箱或者其餘郵箱
    # 建立一個帶附件的實例
    message = MIMEMultipart()
    message['From'] = formataddr(["自動化測試", "cm2019@126.com"])
    message['To'] = ','.join(receivers)
    subject = '自動化測試執行報告'
    message['Subject'] = Header(subject, 'utf-8')
    message["Accept-Language"]="zh-CN"
    message["Accept-Charset"]="ISO-8859-1,utf-8,gbk"
    # 郵件正文內容
    message.attach(MIMEText('最新執行的自動化測試報告，請參閱附件內容！', 'plain', 'utf-8'))

    # 構造附件1，傳送測試結果的excel文件
    att = MIMEBase('application', 'octet-stream')
    att.set_payload(open(ProjDirPath+"\\testdata\\testdata.xlsx", 'rb').read())
    att.add_header('Content-Disposition', 'attachment', filename=('gbk', '', "自動化測試報告.xlsx"))
    encoders.encode_base64(att)
    message.attach(att)
    """
    # 構造附件2，傳送當前目錄下的 runoob.txt 文件
    att2 = MIMEText(open('e:\\a.py','rb').read(), 'base64', 'utf-8')
    att2["Content-Type"] = 'application/octet-stream'
    att2["Content-Disposition"] = 'attachment; filename="a.py"'
    message.attach(att2)
    """
    try:
        smtpObj = smtplib.SMTP(mail_host)
        smtpObj.login(mail_user, mail_pass)
        smtpObj.sendmail(sender, receivers, message.as_string())
        print("郵件發送成功")
    except smtplib.SMTPException as e:
        print("Error: 沒法發送郵件", e)

if __name__ == "__main__":
    send_mail()

4、建立config包用來存放公共的參數、配置文件、長時間不變的變量值

建立public_data.py

import os
# 整個項目的根目錄絕對路勁
baseDir = os.path.dirname(os.path.dirname(__file__))

# 獲取測試數據文件的絕對路徑
file_path = baseDir + "/TestData/inter_test_data.xlsx"

API_apiName = 2
API_requestUrl = 3
API_requestMothod = 4
API_paramsType = 5
API_apiTestCaseFileName = 6
API_active = 7

CASE_requestData = 1
CASE_relyData = 2
CASE_responseCode = 3
CASE_responseData = 4
CASE_dataStore = 5
CASE_checkPoint = 6
CASE_active = 7
CASE_status = 8
CASE_errorInfo = 9

# 存儲請求參數裏面依賴的數據
REQUEST_DATA = {}

# 存儲響應對象中的依賴數據
RESPONSE_DATA = {}

if __name__=="__main__":
    print(file_path)
    print(baseDir)

5、建立TestData目錄，用來存放測試文件

inter_test_data.xlsx

6、建立action包，用來存放關鍵字函數

6.1 解決數據依賴（GetRely.py）

from config.public_data import REQUEST_DATA, RESPONSE_DATA
from utils.md5_encrypt import md5_encrypt

REQUEST_DATA = {"用戶註冊":{"1":{"username":"zhangsan", "password":"dfsdf23"},
                        "headers":{"cookie":"asdfwerw"}}}
RESPONSE_DATA = {"用戶註冊":{"1":{"code":"00"}, "headers":{"age":2342}}}

class GetRely(object):
    def __init__(self):
        pass

    @classmethod
    def get(self, dataSource, relyData, headSource = {}):
        print(type(dataSource))
        print(dataSource)
        data = dataSource.copy()
        for key, value in relyData.items():
            if key == "request":
                #說明應該去REQUEST_DATA中獲取
                for k, v in value.items():
                    interfaceName, case_idx = v.split("->")
                    val = REQUEST_DATA[interfaceName][case_idx][k]
                    if k == "password":
                        data[k] = md5_encrypt(val)
                    else:
                        data[k] = val
            elif key == "response":
                # 應該去RESPONSE_DATA中獲取
                for k, v in value.items():
                    interfaceName, case_idx = v.split("->")
                    data[k] = RESPONSE_DATA[interfaceName][case_idx][k]
            elif key == "headers":
                if headSource:
                    for key, value in value.items():
                        if key == "request":
                            for k, v in value.items():
                                for i in v:
                                    headSource[i] = REQUEST_DATA[k]["headers"][i]
                        elif key == "response":
                            for i, val in value.items():
                                for j in val:
                                    headSource[j] = RESPONSE_DATA[i]["headers"][j]
        return "%s" %data

if __name__ == "__main__":
    s = {"username": "", "password": "","code":""}
    h = {"cookie":"123", "age":332}
    rely = {"request": {"username": "用戶註冊->1", "password": "用戶註冊->1"},
            "response":{"code":"用戶註冊->1"},
            "headers":{"request":{"用戶註冊":["cookie"]},"response":{"用戶註冊":["age"]}}
            }
    print(GetRely.get(s, rely, h))

6.2 解決數據存儲（RelyDataStore.py）

from config.public_data import RESPONSE_DATA, REQUEST_DATA

class RelyDataStore(object):
    def __init__(self):
        pass

    @classmethod
    def do(cls, storePoint, apiName, caseId, request_source = {}, response_source = {}, req_headers={}, res_headers = {}):
        for key, value in storePoint.items():
            if key == "request":
                # 說明須要存儲的依賴數據來自請求參數,應該將數據存儲到REQUEST_DATA
                for i in value:
                    if i in request_source:
                        val = request_source[i]
                        if apiName not in REQUEST_DATA:
                            # 說明存儲數據的結構還未生成，須要指明數據存儲結構
                            REQUEST_DATA[apiName]={str(caseId): {i: val}}
                        else:
                            #說明存儲數據結構中最外層結構已存在
                            if str(caseId) in REQUEST_DATA[apiName]:
                                REQUEST_DATA[apiName][str(caseId)][i] = val
                            else:
                                # 說明內層結構不完整，須要指明完整的結構
                                REQUEST_DATA[apiName][str(caseId)] = {i: val}
                    else:
                        print("請求參數中不存在字段" + i)
            elif key == "response":
                #說明須要存儲的依賴數據來自接口的響應body,應該將數據存儲到RESPONSE_DATA
                for j in value:
                    if j in response_source:
                        val = response_source[j]
                        if apiName not in RESPONSE_DATA:
                            # 說明存儲數據的結構還未生成，須要指明數據存儲結構
                            RESPONSE_DATA[apiName]={str(caseId): {j: val}}
                        else:
                            #說明存儲數據結構中最外層結構已存在
                            if str(caseId) in RESPONSE_DATA[apiName]:
                                RESPONSE_DATA[apiName][str(caseId)][j] = val
                            else:
                                # 說明內層結構不完整，須要指明完整的結構
                                RESPONSE_DATA[apiName][str(caseId)] = {j: val}
                    else:
                        print("接口的響應body中不存在字段" + j)
            elif key == "headers":
                for k, v in value.items():
                    if k == "request":
                        # 說明須要往REQUEST_DATA變量中寫入存儲數據
                        for item in v:
                            if item in req_headers:
                                header = req_headers[item]
                                if "headers" in REQUEST_DATA[apiName]:
                                    REQUEST_DATA[apiName]["headers"][item] = header
                                else:
                                    REQUEST_DATA[apiName]["headers"] = {item: header}
                    elif k == "response":
                        # 說明須要往RESPONSE_DATA變量中寫入存儲數據
                        for it in v:
                            if it in res_headers:
                                header = res_headers[it]
                                if "headers" in RESPONSE_DATA[apiName]:
                                    RESPONSE_DATA[apiName]["headers"][it] = header
                                else:
                                    RESPONSE_DATA[apiName]["headers"] = {item: header}
        print(REQUEST_DATA)
        print(RESPONSE_DATA)

if __name__ == "__main__":
    r = {"username": "srwcx01", "password": "wcx123wac1", "email": "wcx@qq.com"}
    req_h = {"cookie":"csdfw23"}
    res_h = {"age":597232}
    s = {"request": ["username", "password"], "response": ["userid"],"headers":{"request":["cookie"],
        "response":["age"]}}
    res = {"userid": 12, "code": "00"}
    RelyDataStore.do(s, "register", 1, r, res, req_headers=req_h, res_headers=res_h)
    print(REQUEST_DATA)
    print(RESPONSE_DATA)

6.3 校驗數據結果（CheckResult.py）

import re

class CheckResult(object):
    def __init__(self):
        pass

    @classmethod
    def check(self, responseObj, checkPoint):
        responseBody = responseObj.json()
        # responseBody = {"code": "", "userid": 12, "id": "12"}
        errorKey = {}
        for key, value in checkPoint.items():
            if key in responseBody:
                if isinstance(value, (str, int)):
                    # 等值校驗
                    if responseBody[key] != value:
                        errorKey[key] = responseBody[key]
                elif isinstance(value, dict):
                    sourceData = responseBody[key]
                    if "value" in value:
                        # 模糊匹配校驗
                        regStr = value["value"]
                        rg = re.match(regStr, "%s" %sourceData)
                        if not rg:
                            errorKey[key] = sourceData
                    elif "type" in value:
                        # 數據類型校驗
                        typeS = value["type"]
                        if typeS == "N":
                            # 說明是整形校驗
                            if not isinstance(sourceData, int):
                                errorKey[key] = sourceData
            else:
                errorKey[key] = "[%s] not exist" %key
        return errorKey

if __name__ == "__main__":
    r = {"code": "00", "userid": 12, "id": 12}
    c = {"code": "00", "userid": {"type": "N"}, "id": {"value": "\d+"}}
    print(CheckResult.check(r, c))

6.4 往excel裏面寫結果

from config.public_data import *

def write_result(wbObj, sheetObj, responseData, errorKey, rowNum):
    try:
        # 寫響應body
        wbObj.writeCell(sheetObj, content="%s" %responseData,
                        rowNo = rowNum, colsNo=CASE_responseData)
        # 寫校驗結果狀態及錯誤信息
        if errorKey:
            wbObj.writeCell(sheetObj, content="%s" %errorKey,
                        rowNo=rowNum, colsNo=CASE_errorInfo)
            wbObj.writeCell(sheetObj, content="faild",
                            rowNo=rowNum, colsNo=CASE_status, style="red")
        else:
            wbObj.writeCell(sheetObj, content="pass",
                            rowNo=rowNum, colsNo=CASE_status, style="green")
    except Exception as err:
        raise err

若是對軟件測試、接口測試、自動化測試、面試經驗交流。感興趣能夠加軟件測試交流：1085991341，還會有同行一塊兒技術交流。

7、建立Log目錄用來存放日誌

8、主函數

#encoding=utf-8
import requests
import json
from action.get_rely import GetRely
from config.public_data import *
from utils.ParseExcel import ParseExcel
from utils.HttpClient import HttpClient
from action.data_store import RelyDataStore
from action.check_result import CheckResult
from action.write_result import write_result
from utils.Log import *

def main():
    parseE = ParseExcel()
    parseE.loadWorkBook(file_path)
    sheetObj = parseE.getSheetByName("API")
    activeList = parseE.getColumn(sheetObj, API_active)
    for idx, cell in enumerate(activeList[1:], 2):
        if cell.value == "y":
            #須要被執行
            RowObj = parseE.getRow(sheetObj, idx)
            apiName = RowObj[API_apiName -1].value
            requestUrl = RowObj[API_requestUrl - 1].value
            requestMethod = RowObj[API_requestMothod - 1].value
            paramsType = RowObj[API_paramsType - 1].value
            apiTestCaseFileName = RowObj[API_apiTestCaseFileName - 1].value

            # 下一步讀取用例sheet表，準備執行測試用例
            caseSheetObj = parseE.getSheetByName(apiTestCaseFileName)
            caseActiveObj = parseE.getColumn(caseSheetObj, CASE_active)
            for c_idx, col in enumerate(caseActiveObj[1:], 2):
                if col.value == "y":
                    #須要執行的用例
                    caseRowObj = parseE.getRow(caseSheetObj, c_idx)
                    requestData = caseRowObj[CASE_requestData - 1].value
                    relyData = caseRowObj[CASE_relyData - 1].value
                    responseCode = caseRowObj[CASE_responseCode - 1].value
                    responseData = caseRowObj[CASE_responseData - 1].value
                    dataStore = caseRowObj[CASE_dataStore -1].value
                    checkPoint = caseRowObj[CASE_checkPoint - 1].value

                    #發送接口請求以前須要作一下數據依賴的處理
                    if relyData:
                        logging.info("處理第%s個接口的第%s條用例的數據依賴！")
                        requestData = GetRely.get(eval(requestData), eval(relyData))
                    httpC = HttpClient()
                    response = httpC.request(requestMethod=requestMethod,
                                             requestData=requestData,
                                             requestUrl=requestUrl,
                                             paramsType=paramsType
                                             )
                    # 獲取到響應結果後，接下來進行數據依賴存儲邏輯實現
                    if response.status_code == 200:
                        responseData = response.json()
                        # 進行依賴數據存儲
                        if dataStore:
                            RelyDataStore.do(eval(dataStore), apiName, c_idx - 1, eval(requestData), responseData)
                        # 接下來就是校驗結果
                        else:
                            logging.info("接口【%s】的第【%s】條用例，不須要進行依賴數據存儲！" %(apiName, c_idx))
                        if checkPoint:
                            errorKey = CheckResult.check(response, eval(checkPoint))
                            write_result(parseE, caseSheetObj, responseData, errorKey, c_idx)
                    else:
                        logging.info("接口【%s】的第【%s】條用例，執行失敗，接口協議code非200！" %(apiName, c_idx))
                else:
                    logging.info("第%s個接口的第%s條用例，被忽略執行！" %(idx -1, c_idx-1))
        else:
            logging.info("第%s行的接口被忽略執行！" %(idx -1))

if __name__=="__main__":
    main()