OpenWrt設置訪客網絡Guest Wi-Fi

參考 https://wiki.openwrt.org/doc/recipes/guest-wlan-webinterface

1. 在2.4GHz Wireless Controller下, 建立訪客WiFi

在編輯界面中, Channel選擇與現有網絡不一樣編號,Advanced Settings都保持默認

ESSID設置一個易於辨認的名稱, 例如OpenWrt-Guest, Mode選擇Access Point, Network選擇create, 填入guest, Wireless Security先不用設置

Save & Apply

2. 設置Network中新增的 GUEST interface

Protocol選擇Static address, 點擊switch protocol, 填入與當前子網不一樣的網段IP, 例如192.168.1.1, mask 255.255.255.0

Firewall Settings 選擇create, 填入 guest

啓用dhcp

Save & Apply

3. 設置Firewall, 點擊guest對應的edit

Input設置爲reject, Covered networks只選guest, Inter-Zone Forwarding中, 僅勾選Allow forward to destination zones的 wan部分

Save & Apply

4. 設置Firewall -> Traffic Rules

Open ports on router

添加 Name: Allow-Guest-DNS, Protocol:TCP+UDP, External port:53

添加 Name: Allow-Guest-DHCP, Protocol:UDP, External port:67-68

再分別編輯這兩個rule, 將Source zone改成guest, Destination zone改成Device(input)

 

 

 

Save & Apply