adb結合wpa_cli查看wifi狀態命令集

1.status  查看當前的WIFI狀態
adb shell wpa_cli -iwlan0 -g@android:wpa_wlan0 IFNAME=wlan0 status
bssid=70:62:b8:62:2e:c4   // 一個長度爲48位二進制的數字標誌，用於識別不一樣的BSS(Basic Service Set)基本服務集，主要用於過濾
freq=2412(1)  2417(2)  2422(3) 2427(4) 2432(5) 2437(6) 2442(7) 2447(8) 2452(9) 2457(10) 2462(11) 2467(12) 2472(13)  //與熱點鏈接的信道
ssid=cts //當前鏈接的熱點AP的名稱
id=2   // 當前熱點AP記錄下STA的編號
mode=station   // 當前設備的工做模式爲STA
pairwise_cipher=CCMP 【NONE】//表示當前熱點AP接受的安全加密算法  CCMP表示的是    密碼塊消息完整性協議
group_cipher=TKIP 【CCMP NONE】    //group_cipher 表示當前熱點AP接受的安全加密算法 TKIP 表示的是  臨時密碼完整性協議
key_mgmt=WPA2-PSK 【NONE】  //認證密鑰管理協議
wpa_state=COMPLETED 【SCANNING DISCONNECTED】//STA的鏈接狀態
ip_address=192.168.235.18  //熱點分配給STA的IP地址(任意分配)
p2p_device_address=5e:a8:6a:e5:cb:cd  // 當前設備做爲 WIFI直連時的MAC地址?  是STA的MAC地址加了2 從5e->5c 其後數字同樣?
address=5c:a8:6a:e5:cb:cd        //STA的MAC地址
uuid=6885e701-c4a3-51c9-bd4d-98b0a5204df2    //全統統用惟一設備標識符  固定
 
 
2.terminate   當即關閉 wpa_supplicant   // 關閉WIFI
adb shell wpa_cli -iwlan0 -g@android:wpa_wlan0 IFNAME=wlan0 terminate 
 
 
3.list_networks  鏈接過的WIFI  
adb shell wpa_cli -iwlan0 -g@android:wpa_wlan0 IFNAME=wlan0 list_networks
network id / ssid / bssid / flags
0       and-Business    any
1       CMCC-WEB        any
2       cts     any
3       MYA-L03_虧哦UK大酒店    any
4       HUAWEI_MYA_3afb any     [CURRENT]
 
 
4.select_network 設置鏈接到熱點 nitid對應的熱點   先斷開鏈接的熱點 再去鏈接netid
adb shell wpa_cli -iwlan0 -g@android:wpa_wlan0 IFNAME=wlan0 select_network 2
 
5.disable_network 斷開與熱點的鏈接  斷開後又會默認鏈接上
adb shell wpa_cli -iwlan0 -g@android:wpa_wlan0 IFNAME=wlan0 disable_network 5
 
 
 
6.signal_poll      get signal parameters
adb shell wpa_cli -iwlan0 -g@android:wpa_wlan0 IFNAME=wlan0 signal_poll
RSSI=-23
LINKSPEED=65
NOISE=9999
FREQUENCY=2442
 
 
7.pktcnt_poll  get TX/RX packet counters
adb shell wpa_cli -iwlan0 -g@android:wpa_wlan0 IFNAME=wlan0 pktcnt_poll
TXGOOD=1146
TXBAD=1
RXGOOD=0
 
 
8. DRIVER MACADDR 得到MAC地址
adb shell wpa_cli -iwlan0 -g@android:wpa_wlan0 IFNAME=wlan0 DRIVER MACADDR
Macaddr = 5c:a8:6a:e5:cb:cd
 
 
9.reassociate 重鏈接
adb shell wpa_cli -iwlan0 -g@android:wpa_wlan0 IFNAME=wlan0 reassociate  
 
 
10.reattach  重鏈接當前已鏈接的WIFI
adb shell wpa_cli -iwlan0 -g@android:wpa_wlan0 IFNAME=wlan0 reattach  
 
 
 
11.ifname   查看當前使用的網卡
adb shell wpa_cli -iwlan0 -g@android:wpa_wlan0 IFNAME=wlan0 ifname
wlan0
 
 
 
12.interface 當前可用接口
adb shell wpa_cli -iwlan0 -g@android:wpa_wlan0 IFNAME=wlan0 interface  
Available interfaces:
p2p0
wlan0
 
 
13.ping  檢測Supplicant是否正常
adb shell wpa_cli -iwlan0 -g@android:wpa_wlan0 IFNAME=wlan0 ping
PONG
 
 
 
 
14.add_network  保存一個網絡(參數未知)
adb shell wpa_cli -iwlan0 -g@android:wpa_wlan0 IFNAME=wlan0 add_network XXXX
 
 
15.remove_network
adb shell wpa_cli -iwlan0 -g@android:wpa_wlan0 IFNAME=wlan0 remove_network 6
 
16.disconnect  段開當前鏈接
adb shell wpa_cli -iwlan0 -g@android:wpa_wlan0 IFNAME=wlan0 disconnect
 
17.reconnect 再次鏈接 若是已經鏈接則不執行
adb shell wpa_cli -iwlan0 -g@android:wpa_wlan0 IFNAME=wlan0 reconnect
 
 
 
18.scan 啓動掃描
adb shell wpa_cli -iwlan0 -g@android:wpa_wlan0 IFNAME=wlan0 scan
 
19.scan_results 獲得最新的掃描結果
adb shell wpa_cli -iwlan0 -g@android:wpa_wlan0 IFNAME=wlan0 scan_results
 
bssid / frequency / signal level / flags / ssid
70:62:b8:62:2e:c4       2412    -68     [WPA-PSK-CCMP+TKIP][WPA2-PSK-CCMP+TKIP][WPS][ESS]       cts
02:08:22:76:b5:73       2417    -24     [WPA2-PSK-CCMP][WPS][ESS]       Lenovo S1La40
06:19:70:27:ca:96       2462    -54     [WPA2-EAP-CCMP-preauth][ESS]    CMCC
00:23:69:ce:58:b0       2412    -62     [WPA-PSK-TKIP][ESS]     LJ-7W1-V3-Linksys
06:19:70:00:32:c0       2472    -61     [WPA2-EAP-CCMP-preauth][ESS]    CMCC
00:22:aa:9e:31:48       2452    -71     [WPA-PSK-CCMP+TKIP][WPA2-PSK-CCMP+TKIP][ESS]    BW-wx20s
b8:e8:56:48:0e:ea       2462    -85     [WPA2-PSK-CCMP][ESS]    KuriMBP
00:19:70:27:ca:96       2462    -55     [ESS]   CMCC-WEB
16:19:70:27:ca:96       2462    -53     [ESS]   and-Business
16:19:70:00:32:c0       2472    -60     [ESS]   and-Business
16:19:70:00:30:2e       2437    -74     [ESS]   and-Business
00:19:70:00:32:c0       2472    -60     [ESS]   CMCC-WEB
02:08:22:da:90:11       2417    -25     [WPS][ESS]      HUAWEI_MYA_3afb
06:19:70:00:30:2e       2437    -65     [WPA2-EAP-CCMP-preauth][ESS]    CMCC
00:19:70:00:30:2e       2437    -73     [ESS]   CMCC-WEB
44:6d:57:99:38:a1       2412    -78     [WPA2-PSK-CCMP][ESS]    whr360
02:08:22:c6:74:1a       2437    -75     [WPA2-PSK-CCMP][WPS][ESS]       AAA5860
00:19:70:00:30:d6       2412    -78     [ESS]   CMCC-WEB
06:19:70:00:30:d6       2412    -78     [WPA2-EAP-CCMP-preauth][ESS]    CMCC
06:19:70:00:30:88       2472    -82     [WPA2-EAP-CCMP-preauth][ESS]    CMCC
16:19:70:00:30:88       2472    -80     [ESS]   and-Business
12:0e:0e:20:63:b7       2437    -78     [WPA-PSK-CCMP+TKIP][WPA2-PSK-CCMP+TKIP][ESS]    VIP-guest
16:19:70:00:30:d6       2412    -78     [ESS]   and-Business
10:0e:0e:20:64:ca       2462    -86     [ESS]   HQ_guest
00:23:69:ce:58:1d       2437    -81     [WPA-PSK-CCMP+TKIP][WPA2-PSK-CCMP+TKIP][ESS]    LJ-Meeting 01
00:22:aa:9e:31:24       2412    -91     [WPA-PSK-CCMP+TKIP][WPA2-PSK-CCMP+TKIP][ESS]    BW-wx20s
00:19:70:00:30:88       2472    -82     [ESS]   CMCC-WEB
22:0e:0e:20:63:b7       2437    -83     [ESS]   HQ_Office
 
 
20.bss 查看熱點詳情 
adb shell wpa_cli -iwlan0 -g@android:wpa_wlan0 IFNAME=wlan0 bss 70:62:b8:62:2e:c4 
adb shell wpa_cli -iwlan0 -g@android:wpa_wlan0 IFNAME=wlan0 bss cts
id=0
bssid=70:62:b8:62:2e:c4  //BSSID 惟一標誌集合
freq=2412  //信道
beacon_int=100   //beacon幀間隔  用於通知AP的狀態
capabilities=0x0411  網絡接入性能
qual=0
noise=-89  //噪音程度   數值越大 噪音越大
level=-63   //信號程度   數值越大 信號越大
tsf=0000519432862866  //時間同步
age=11
ie=0003637473010882848b962430486c0301012a01042f010430180100000fac020200000fac040
00fac020100000fac020c0032040c1218602d1aff1917ffffff00010000000000000000000000000
000000000003d16010d16000000000000000000000000000000000000007f080000000000000040d
d870050f204104a0001101044000102103b000103104700101e88f48914be85b618487062b8622ec
710210006442d4c696e6b1023000d442d4c696e6b20526f75746572102400084449522d3836384c1
042000830303030303030301054000800060050f2040001101100084449522d3836384c100800022
78c103c0001011049000600372a000120dd090010180206001c0000dd1a0050f20101000050f2020
2000050f2040050f20201000050f202dd180050f2020101840003a4000027a4000042435e0062322
f00
flags=[WPA-PSK-CCMP+TKIP][WPA2-PSK-CCMP+TKIP][WPS][ESS]
ssid=cts
wps_state=configured
wps_primary_device_type=6-0050F204-1
wps_device_name=DIR-868L
wps_config_methods=0x278c
snr=26  //信號噪聲比  越大越好  【 level - noise 】 -63-(-89) = 26
est_throughput=135000  bps   WIFI吞吐量
 
 
 
adb shell wpa_cli -iwlan0 -g@android:wpa_wlan0 IFNAME=wlan0 bss 02:08:22:da:90:11
ss 02:08:22:da:90:11
id=98
bssid=02:08:22:da:90:11
freq=2417
beacon_int=100
capabilities=0x0421
qual=0
noise=-89
level=-30
tsf=0000519432863304
age=64
ie=000f4855415745495f4d59415f33616662010882848b960c12182403010232043048606c2a010
02d1a300103ff000000000000000000000001000000000000000000003d160200010000000000000
00000000000000000000000007f0100dd180050f2020101800003a4000027a4000042435e0062322
f00dd180050f204104a00011010440001021049000600372a000120
flags=[WPS][ESS]
ssid=HUAWEI_MYA_3afb
wps_state=configured
snr=59   【 level - noise】 -30-(-89) = 59
est_throughput=65000   bps WIFI吞吐量
 
 
21.get_capability  <eap/pairwise/group/key_mgmt/proto/auth_alg/channels/freq/modes> = get capabilies
adb shell wpa_cli -iwlan0 -g@android:wpa_wlan0 IFNAME=wlan0 get_capability eap
MD5 TLS WFA-UNAUTH-TLS MSCHAPV2 PEAP TTLS GTC OTP SIM LEAP AKA AKA' FAST WSC PWD
 
adb shell wpa_cli -iwlan0 -g@android:wpa_wlan0 IFNAME=wlan0 get_capability pairwise
CCMP TKIP
 
adb shell wpa_cli -iwlan0 -g@android:wpa_wlan0 IFNAME=wlan0 get_capability group
CCMP TKIP WEP104 WEP40
 
adb shell wpa_cli -iwlan0 -g@android:wpa_wlan0 IFNAME=wlan0 get_capability key_mgmt
NONE IEEE8021X WPA-EAP WPA-PSK
 
adb shell wpa_cli -iwlan0 -g@android:wpa_wlan0 IFNAME=wlan0 get_capability proto
RSN WPA
 
adb shell wpa_cli -iwlan0 -g@android:wpa_wlan0 IFNAME=wlan0 get_capability auth_alg
OPEN SHARED LEAP
 
adb shell wpa_cli -iwlan0 -g@android:wpa_wlan0 IFNAME=wlan0 get_capability channels
Mode[G] Channels: 1 2 3 4 5 6 7 8 9 10 11 12 13
Mode[A] Channels: 36 40 44 48 52 56 60 64 149 153 157 161 165
Mode[B] Channels: 1 2 3 4 5 6 7 8 9 10 11 12 13
 
adb shell wpa_cli -iwlan0 -g@android:wpa_wlan0 IFNAME=wlan0 get_capability freq
Mode[G] Channels:
 1 = 2412 MHz
 2 = 2417 MHz
 3 = 2422 MHz
 4 = 2427 MHz
 5 = 2432 MHz
 6 = 2437 MHz
 7 = 2442 MHz
 8 = 2447 MHz
 9 = 2452 MHz
 10 = 2457 MHz
 11 = 2462 MHz
 12 = 2467 MHz
 13 = 2472 MHz
 
Mode[A] Channels:
 36 = 5180 MHz
 40 = 5200 MHz
 44 = 5220 MHz
 48 = 5240 MHz
 52 = 5260 MHz
 56 = 5280 MHz
 60 = 5300 MHz
 64 = 5320 MHz
 149 = 5745 MHz
 153 = 5765 MHz
 157 = 5785 MHz
 161 = 5805 MHz
 165 = 5825 MHz
 
Mode[B] Channels:
 1 = 2412 MHz
 2 = 2417 MHz
 3 = 2422 MHz
 4 = 2427 MHz
 5 = 2432 MHz
 6 = 2437 MHz
 7 = 2442 MHz
 8 = 2447 MHz
 9 = 2452 MHz
 10 = 2457 MHz
 11 = 2462 MHz
 12 = 2467 MHz
 13 = 2472 MHz
 
 
adb shell wpa_cli -iwlan0 -g@android:wpa_wlan0 IFNAME=wlan0 get_capability modes
IBSS
 
 
 
 
 
22.relog
adb shell wpa_cli -iwlan0 -g@android:wpa_wlan0 IFNAME=wlan0 relog
OK
 
 
23.mib
adb shell wpa_cli -iwlan0 -g@android:wpa_wlan0 IFNAME=wlan0 mib   (Manager Info Base)基礎數據庫
dot11RSNAOptionImplemented=TRUE
dot11RSNAPreauthenticationImplemented=TRUE
dot11RSNAEnabled=FALSE
dot11RSNAPreauthenticationEnabled=FALSE
dot11RSNAConfigVersion=1
dot11RSNAConfigPairwiseKeysSupported=5
dot11RSNAConfigGroupCipherSize=0
dot11RSNAConfigPMKLifetime=43200
dot11RSNAConfigPMKReauthThreshold=70
dot11RSNAConfigNumberOfPTKSAReplayCounters=1
dot11RSNAConfigSATimeout=60
dot11RSNAAuthenticationSuiteSelected=00-00-00-0
dot11RSNAPairwiseCipherSelected=00-0f-ac-0
dot11RSNAGroupCipherSelected=00-0f-ac-0
dot11RSNAPMKIDUsed=
dot11RSNAAuthenticationSuiteRequested=00-00-00-0
dot11RSNAPairwiseCipherRequested=00-0f-ac-0
dot11RSNAGroupCipherRequested=00-0f-ac-0
dot11RSNAConfigNumberOfGTKSAReplayCounters=0
dot11RSNA4WayHandshakeFailures=0
dot1xSuppPaeState=9
dot1xSuppHeldPeriod=60
dot1xSuppAuthPeriod=30
dot1xSuppStartPeriod=30
dot1xSuppMaxStart=3
dot1xSuppSuppControlledPortStatus=Authorized
dot1xSuppBackendPaeState=2
dot1xSuppEapolFramesRx=0
dot1xSuppEapolFramesTx=2
dot1xSuppEapolStartFramesTx=0
dot1xSuppEapolLogoffFramesTx=0
dot1xSuppEapolRespFramesTx=0
dot1xSuppEapolReqIdFramesRx=0
dot1xSuppEapolReqFramesRx=0
dot1xSuppInvalidEapolFramesRx=0
dot1xSuppEapLengthErrorFramesRx=0
dot1xSuppLastEapolFrameVersion=0
dot1xSuppLastEapolFrameSource=00:00:00:00:00:00
 
24.help
adb shell wpa_cli -iwlan0 -g@android:wpa_wlan0 IFNAME=wlan0 help  
commands:
  mib = get MIB variables (dot1x, dot11)
  
 
 
25.license  查看版本 聲明
adb shell wpa_cli -iwlan0 -g@android:wpa_wlan0 IFNAME=wlan0 license  
wpa_cli v2.5-devel-6.0
 
 
26.dump 查看變量
adb shell wpa_cli -iwlan0 -g@android:wpa_wlan0 IFNAME=wlan0 dump  
ctrl_interface=/data/misc/wifi/sockets
ctrl_interface_group=null
eapol_version=1
ap_scan=1
disable_scan_offload=0
fast_reauth=1
opensc_engine_path=null
pkcs11_engine_path=null
pkcs11_module_path=null
openssl_ciphers=null
pcsc_reader=null
pcsc_pin=null
external_sim=1
driver_param=use_p2p_group_interface=1
dot11RSNAConfigPMKLifetime=0
dot11RSNAConfigPMKReauthThreshold=0
dot11RSNAConfigSATimeout=0
update_config=1
device_name=full_hq6737t_66_1ha_m0
manufacturer=alps
model_name=hq6737t_66_1ha_m0
model_number=hq6737t_66_1ha_m0
serial_number=SJVBBBA681500266
config_methods=physical_display virtual_push_button
wps_cred_processing=0
p2p_listen_reg_class=0
p2p_listen_channel=0
p2p_oper_reg_class=0
p2p_oper_channel=0
p2p_go_intent=7
p2p_ssid_postfix=null
persistent_reconnect=0
p2p_intra_bss=1
p2p_group_idle=0
p2p_passphrase_len=0
p2p_add_cli_chan=0
p2p_optimize_listen_chan=0
p2p_go_ht40=0
p2p_go_vht=0
p2p_disabled=0
p2p_go_ctwindow=0
p2p_no_group_iface=1
p2p_ignore_shared_freq=0
ip_addr_go=0.0.0.0
ip_addr_mask=0.0.0.0
ip_addr_start=0.0.0.0
ip_addr_end=0.0.0.0
p2p_cli_probe=0
bss_max_count=200
bss_expiration_age=180
bss_expiration_scan_count=2
filter_ssids=0
filter_rssi=0
max_num_sta=128
disassoc_low_ack=0
hs20=0
interworking=0
access_network_type=15
pbc_in_m1=0
autoscan=null
wps_nfc_dev_pw_id=0
ext_password_backend=null
p2p_go_max_inactivity=300
auto_interworking=0
okc=0
pmf=0
dtim_period=0
beacon_int=0
ignore_old_scan_res=0
scan_cur_freq=0
sched_scan_interval=0
tdls_external_control=0
osu_dir=null
wowlan_triggers=disconnect
p2p_search_delay=500
mac_addr=0
rand_addr_lifetime=60
preassoc_mac_addr=0
key_mgmt_offload=1
passive_scan=0
reassoc_same_bss_optim=0
wps_priority=0
overlay_loaded=0
 
 
 
27. log_level 
adb shell wpa_cli -iwlan0 -g@android:wpa_wlan0 IFNAME=wlan0 log_level  
Current level: MSGDUMP
Timestamp: 0
 
 
 
28.reconfigure 從新配置   reconfigure = force wpa_supplicant to re-read its configuration file
adb shell wpa_cli -iwlan0 -g@android:wpa_wlan0 IFNAME=wlan0 reconfigure
 
 
29.scan_interval 設置掃描間隔
adb shell wpa_cli -iwlan0 -g@android:wpa_wlan0 IFNAME=wlan0 scan_interval 3 
 
 
30.blacklist 黑名單
adb shell wpa_cli -iwlan0 -g@android:wpa_wlan0 IFNAME=wlan0 blacklist
 
 
31.DRIVER GET_STA_STATISTICS <MACADDRESS> 查看手機STA信息
adb shell wpa_cli -iwlan0 -g@android:wpa_wlan0 IFNAME=wlan0 DRIVER GET_STA_STATISTICS 5c:a8:6a:e5:cb:cd
sta_addr=5c:a8:6a:e5:cb:cd
link_score=100
per=0
rssi=-110
phy=0x00000000
rate=0.0
total_cnt=0
threshold_cnt=0
fail_cnt=0
timeout_cnt=0
apt=0
aat=0
TC_buf_full_cnt=0:0:0:0
TC_sta_que_len=0:0:0:0
TC_avg_que_len=0:0:0:0
TC_cur_que_len=8:8:8:8
flag=0x00000000
reserved0=00000000 00000000 00000000 00000000
reserved1=00000000 00000000 00000000 00000000
 
 
32:set   【set 命令設置環境變量(dump裏的變量)】
adb shell wpa_cli -iwlan0 -g@android:wpa_wlan0 IFNAME=wlan0  set passive_scan  1
adb shell wpa_cli -iwlan0 -g@android:wpa_wlan0 IFNAME=wlan0  set oce  1
adb shell wpa_cli -iwlan0 -g@android:wpa_wlan0 IFNAME=wlan0  set  okc  1
========================================================================================
33:get   【get 命令 查詢環境變量(dump裏的變量)】
adb shell wpa_cli -iwlan0 -g@android:wpa_wlan0 IFNAME=wlan0  get passive_scan
adb shell wpa_cli -iwlan0 -g@android:wpa_wlan0 IFNAME=wlan0  get oce
adb shell wpa_cli -iwlan0 -g@android:wpa_wlan0 IFNAME=wlan0  get  okc
========================================================================================
34:pmksa   【  show PMKSA cache  】 
adb shell wpa_cli -iwlan0 -g@android:wpa_wlan0 IFNAME=wlan0 pmksa_flush  【 OK 】
adb shell wpa_cli -iwlan0 -g@android:wpa_wlan0 IFNAME=wlan0 pmksa
Index / AA / PMKID / expiration (in seconds) / opportunistic
1 18:64:72:21:85:c3 e447f44b4d61bcc34fd325ba1dafd038 41657 0
 
 
 
 
========================================================================================
35:preauthenticate   【 預先認證 】 
adb shell wpa_cli -iwlan0 -g@android:wpa_wlan0 IFNAME=wlan0 preauthenticate 18:64:72:21:86:43
 
 
========================================================================================
36:blacklist <macAddr>  【 加入黑名單 】 
adb shell wpa_cli -iwlan0 -g@android:wpa_wlan0 IFNAME=wlan0 blacklist 18:64:72:21:86:43
adb shell wpa_cli -iwlan0 -g@android:wpa_wlan0 IFNAME=wlan0 blacklist // 展現黑名單
adb shell wpa_cli -iwlan0 -g@android:wpa_wlan0 IFNAME=wlan0 blacklist clear  // 清楚黑名單
========================================================================================
37:log_level  [ DEBUG | INFO ]  【 設置LOG等級 】 
adb shell wpa_cli -iwlan0 -g@android:wpa_wlan0 IFNAME=wlan0  log_level
adb shell wpa_cli -iwlan0 -g@android:wpa_wlan0 IFNAME=wlan0  log_level   DEBUG
adb shell wpa_cli -iwlan0 -g@android:wpa_wlan0 IFNAME=wlan0  log_level   INFO