雲主機搭建Nginx + RTMP服務器

首先 分享一個我搭建好的直播地址:

rtmp://115.28.135.68:1935/yuzhouheike/room

複製代碼

其中room這個你能夠隨意修改(你能夠改成rtmp://115.28.135.68:1935/yuzhouheike/hades)

提早申明 直播推流的方式有不少.網上也能搜出很多教程.

其中簡書上的 mac下搭建直播服務器 的教程有我看到以下兩個

• Monkey_ALin 的快速集成iOS基於RTMP的視頻推流,
• 嗷大喵 的OSX安裝nginx和rtmp模塊（rtmp直播服務器搭建） 由於雲主機提供商通常只提供Linux或者Windows操做系統!因此要是你想作一個能夠遠程直播的服務器!只好放棄mac

此次我選擇的是阿里雲主機(絕對不是打廣告)

• 個人雲主機裝操做系統的是CentOS 6.5 64位
• 受到上面兩位的啓發,我總結了一下要搭建一個nginx+rtmp直播推流服務器其實就兩個步驟
  • 安裝nginx點進去後你會發現不少版本,隨便選一個就能夠了,我選擇的是[1.8.1]

• 增長對rtmp的支持，下載nginx-rtmp-module這個是個開源項目。 下面是項目提供的nginx配置文件樣例(值得注意的就是)

這個名字決定了你的直播推流服務器的路徑 (按照圖中這樣設置你的地址將是 rtmp://你的公網ip:1935/mytv/隨便起個名)

rtmp {

    server {

        listen 1935;

        chunk_size 4000;

        # TV mode: one publisher, many subscribers
        application mytv {

            # enable live streaming
            live on;

            # record first 1K of stream
            record all;
            record_path /tmp/av;
            record_max_size 1K;

            # append current timestamp to each flv
            record_unique on;

            # publish only from localhost
            allow publish 127.0.0.1;
            deny publish all;

            #allow play all;
        }

        # Transcoding (ffmpeg needed)
        application big {
            live on;

            # On every pusblished stream run this command (ffmpeg)
            # with substitutions: $app/${app}, $name/${name} for application & stream name.
            #
            # This ffmpeg call receives stream from this application &
            # reduces the resolution down to 32x32. The stream is the published to
            # 'small' application (see below) under the same name.
            #
            # ffmpeg can do anything with the stream like video/audio
            # transcoding, resizing, altering container/codec params etc
            #
            # Multiple exec lines can be specified.

            exec ffmpeg -re -i rtmp://localhost:1935/$app/$name -vcodec flv -acodec copy -s 32x32
                        -f flv rtmp://localhost:1935/small/${name};
        }

        application small {
            live on;
            # Video with reduced resolution comes here from ffmpeg
        }

        application webcam {
            live on;

            # Stream from local webcam
            exec_static ffmpeg -f video4linux2 -i /dev/video0 -c:v libx264 -an
                               -f flv rtmp://localhost:1935/webcam/mystream;
        }

        application mypush {
            live on;

            # Every stream published here
            # is automatically pushed to
            # these two machines
            push rtmp1.example.com;
            push rtmp2.example.com:1934;
        }

        application mypull {
            live on;

            # Pull all streams from remote machine
            # and play locally
            pull rtmp://rtmp3.example.com pageUrl=www.example.com/index.html;
        }

        application mystaticpull {
            live on;

            # Static pull is started at nginx start
            pull rtmp://rtmp4.example.com pageUrl=www.example.com/index.html name=mystream static;
        }

        # video on demand
        application vod {
            play /var/flvs;
        }

        application vod2 {
            play /var/mp4s;
        }

        # Many publishers, many subscribers
        # no checks, no recording
        application videochat {

            live on;

            # The following notifications receive all
            # the session variables as well as
            # particular call arguments in HTTP POST
            # request

            # Make HTTP request & use HTTP retcode
            # to decide whether to allow publishing
            # from this connection or not
            on_publish http://localhost:8080/publish;

            # Same with playing
            on_play http://localhost:8080/play;

            # Publish/play end (repeats on disconnect)
            on_done http://localhost:8080/done;

            # All above mentioned notifications receive
            # standard connect() arguments as well as
            # play/publish ones. If any arguments are sent
            # with GET-style syntax to play & publish
            # these are also included.
            # Example URL:
            # rtmp://localhost/myapp/mystream?a=b&c=d

            # record 10 video keyframes (no audio) every 2 minutes
            record keyframes;
            record_path /tmp/vc;
            record_max_frames 10;
            record_interval 2m;

            # Async notify about an flv recorded
            on_record_done http://localhost:8080/record_done;

        }


        # HLS

        # For HLS to work please create a directory in tmpfs (/tmp/hls here)
        # for the fragments. The directory contents is served via HTTP (see
        # http{} section in config)
        #
        # Incoming stream must be in H264/AAC. For iPhones use baseline H264
        # profile (see ffmpeg example).
        # This example creates RTMP stream from movie ready for HLS:
        #
        # ffmpeg -loglevel verbose -re -i movie.avi -vcodec libx264
        # -vprofile baseline -acodec libmp3lame -ar 44100 -ac 1
        # -f flv rtmp://localhost:1935/hls/movie
        #
        # If you need to transcode live stream use 'exec' feature.
        #
        application hls {
            live on;
            hls on;
            hls_path /tmp/hls;
        }

        # MPEG-DASH is similar to HLS

        application dash {
            live on;
            dash on;
            dash_path /tmp/dash;
        }
    }
}

# HTTP can be used for accessing RTMP stats
http {

    server {

        listen      8080;

        # This URL provides RTMP statistics in XML
        location /stat {
            rtmp_stat all;

            # Use this stylesheet to view XML as web page
            # in browser
            rtmp_stat_stylesheet stat.xsl;
        }

        location /stat.xsl {
            # XML stylesheet to view RTMP stats.
            # Copy stat.xsl wherever you want
            # and put the full directory path here
            root /path/to/stat.xsl/;
        }

        location /hls {
            # Serve HLS fragments
            types {
                application/vnd.apple.mpegurl m3u8;
                video/mp2t ts;
            }
            root /tmp;
            add_header Cache-Control no-cache;
        }

        location /dash {
            # Serve DASH fragments
            root /tmp;
            add_header Cache-Control no-cache;
        }
    }
}
複製代碼

下面開始詳細步驟

• 下載nginx

# wget http://nginx.org/download/nginx-1.8.1.tar.gz
複製代碼

• 下載nginx-rtmp-module

# wget https://codeload.github.com/arut/nginx-rtmp-module/zip/master
複製代碼

• 切到你的nginx-1.8.1 下執行以下命令

# ./configure --prefix=/usr/local/nginx --add-module=(你的nginx-rtmp-module的絕對路徑(絕對路徑能夠切換到那個文件下 執行命令 ```# pwd)) --with-http_ssl_module
複製代碼

• 上述命令完成以後執行

# make
複製代碼

• make完成以後執行

#make install
複製代碼

配置nginx文件(配置樣式在上面提供了,即nginx-rtmp-module githubreadme頁面)

vim  /usr/local/nginx/conf/nginx.conf 
複製代碼

配置完以後開啓nginx

# /usr/local/nginx/sbin/nginx -c /usr/local/nginx/conf/nginx.conf
複製代碼

作到這裏,你就能夠正常使用你的直播推流服務器了!使用方法我就不贅述了

最後推廣一下個人公衆號