BAT腳本與ADB命令

根據同事的一個需求，寫了一個bat腳本，內容以下：

@ECHO OFF
color 2f
ECHO ※※※※※※※※※※※※※※※※※※※※
ECHO ※ made by lihaiyan@wind-mobi.com ※
ECHO ※ date: 2015/10/29                        ※
ECHO ※※※※※※※※※※※※※※※※※※※※

set Filename=%DATE:~0,4%%DATE:~5,2%%DATE:~8,2%-%TIME:~0,2%%TIME:~3,2%%TIME:~6,2%

echo %DATE:~0,4%-%DATE:~5,2%-%DATE:~8,2% %TIME:~0,2%:%TIME:~3,2%:%TIME:~6,2%
set file_path=d:\save-%Filename%.txt
echo file saved in %file_path%
:a
set /p cpu_number=請輸入CPU核心數:
set /p loop=無限循環測試請輸入1，有限次數測試請輸入0:

if %loop% == 1 (
echo >%file_path%
echo CPU核心數：%cpu_number% >> %file_path%
echo 無限次循環測試 >> %file_path%
set times_temp2=1
:d
echo ------------第%times_temp2%次測試-----------------
echo ------------第%times_temp2%次測試----------------- >> %file_path%
echo date: %DATE:~0,4%-%DATE:~5,2%-%DATE:~8,2% %TIME:~0,2%:%TIME:~3,2%:%TIME:~6,2% >> %file_path%
adb shell i=0;while [ i -lt %cpu_number% ];do cat /sys/bus/cpu/devices/cpu$i/online;cat /sys/bus/cpu/devices/cpu$i/cpufreq/cpuinfo_cur_freq;let i+=1;done >> %file_path%
set /a times_temp2+=1
goto d

)

set /p times=請輸入測試次數:
set times_temp=1

if not defined cpu_number (
echo CPU核心數不能爲空！
GOTO a
)
if not defined times (
echo 測試次數不能爲空！
GOTO a
)
if %cpu_number% == 0 (
echo CPU核心數不能爲零！
GOTO a
)
if %cpu_number% LSS %times_temp% (
echo 測試次數不能小於1！
GOTO a
)

echo >%file_path%
echo CPU核心數：%cpu_number% >> %file_path%
echo 測試次數：%times% >> %file_path%
echo >> %file_path%
:b
echo ------------第%times_temp%次測試-----------------
echo ------------第%times_temp%次測試----------------- >> %file_path%
echo date: %DATE:~0,4%-%DATE:~5,2%-%DATE:~8,2% %TIME:~0,2%:%TIME:~3,2%:%TIME:~6,2% >> %file_path%
adb shell i=0;while [ i -lt %cpu_number% ];do cat /sys/bus/cpu/devices/cpu$i/online;cat /sys/bus/cpu/devices/cpu$i/cpufreq/cpuinfo_cur_freq;i=$(($i+1));done >> %file_path%
set /a times_temp+=1

if %times_temp% LEQ %times% (
GOTO b
) else (
echo 保存成功，路徑爲%file_path%
)

:c
pause