19.EVE-NG優化非官方支持鏡像的接口顯示名稱

---

文章列表（關注微信公衆號EmulatedLab，及時獲取文章以及下載連接）

一、EVE-NG介紹（EVE-NG最好用的模擬器，仿真環境時代來臨！）

二、EVE-NG安裝過程介紹

三、EVE-NG導入Dynamips和IOL

四、EVE-NG導入QEMU鏡像

五、EVE-NG關聯SecureCRT，VNC，Wireshark

六、EVE-NG網卡橋接，帶您走進更高級的實驗

七、EVE-NG硬盤擴容，存儲海量鏡像

八、EVE-NG定製我的鏡像，腳本快速導入

九、EVE-NG容納H3C、Huawei，吞併GNS3

十、EVE-NG鏡像來啦！打造國內最大的EVE交流圈

十一、EVE-NG鏡像再次來襲，無所不能！

十二、EVE-NG鏡像增持，走上神壇！

1三、EVE-NG內存不夠？教您擴大虛擬內存！

1四、EVE-NG更新方便，不費勁兒！

1五、EVE-NG小衆鏡像，助力嚐鮮！

1六、EVE-NG體驗Seafile，拋棄10K/s網盤

1七、EVE-NG增添監控服務器鏡像，再上新高度！

1八、EVE-NG變身Learning Centre版本及重置Web用戶密碼

1九、EVE-NG優化非官方支持鏡像的接口顯示名稱

20、EVE-NG華麗登場Openstack鏡像，體驗私有云！

點擊查看配套視頻教程！

---

 

 

目前已優化的設備包含：

            H3C vSR

            H3C vFW

            H3C vLB

            HuaweiUSG

            HillStone

 

 

以H3C vSR舉例

 

 

原接口名稱

終端執行命令

 

root@eve-ng:~# cp/opt/unetlab/html/includes/__node.php{,.`date +%s`}&&sed -i "/case'a10':/i\\\t\t\t\t\tcase 'vsr':\n\t\t\t\t\t\tfor (\$i = 0; \$i < \$this-> ethernet; \$i++) {\n\t\t\t\t\t\t\t\$n = 'Gi'.(\$i+1).'/0';                // Interfacename\n\t\t\t\t\t\t\tif (isset(\$old_ethernets[\$i])) {\n\t\t\t\t\t\t\t\t//Previous interface found, copy from old one\n\t\t\t\t\t\t\t\t\$this ->ethernets[\$i] = \$old_ethernets[\$i];\n\t\t\t\t\t\t\t} else{\n\t\t\t\t\t\t\t\ttry {\n\t\t\t\t\t\t\t\t\t\$this -> ethernets[\$i] = newInterfc(Array('name' => \$n, 'type' => 'ethernet'),\$i);\n\t\t\t\t\t\t\t\t} catch (Exception \$e){\n\t\t\t\t\t\t\t\t\terror_log(date('M d H:i:s ').'ERROR:'.\$GLOBALS['messages'][40020]);\n\t\t\t\t\t\t\t\t\terror_log(date('M d H:i:s').(string) \$e);\n\t\t\t\t\t\t\t\t\treturn40020;\n\t\t\t\t\t\t\t\t}\n\t\t\t\t\t\t\t}\n\t\t\t\t\t\t\t// Setting CMD flags(virtual device and map to TAP device)\n\t\t\t\t\t\t\t\$this -> flags_eth .=' -device %NICDRIVER%,netdev=net'.\$i.',mac=50:'.sprintf('%02x', \$this ->tenant).':'.sprintf('%02x', \$this -> id / \n12).':'.sprintf('%02x', \$this-> id % 512).':00:'.sprintf('%02x', \$i);\n\t\t\t\t\t\t\t\$this ->flags_eth .= ' -netdev tap,id=net'.\$i.',ifname=vunl'.\$this ->tenant.'_'.\$this ->id.'_'.\$i.',script=no';\n\t\t\t\t\t\t}\n\t\t\t\t\t\tbreak;\n"/opt/unetlab/html/includes/__node.php

root@eve-ng:~#

 

 

 

更改後的接口名稱與OS中顯示的名稱吻合

 

 

 

注意：

老用戶直接執行命令便可！

新用戶在導入設備時，接口名稱就已優化，無需額外執行命令！

 

 

全部設備相應的執行命令：（每一個命令都有細微差異）

1、H3C vSR：

cp/opt/unetlab/html/includes/__node.php{,.`date +%s`}&&sed -i "/case'a10':/i\\\t\t\t\t\tcase 'vsr':\n\t\t\t\t\t\tfor (\$i = 0; \$i < \$this-> ethernet; \$i++) {\n\t\t\t\t\t\t\t\$n = 'Gi'.(\$i+1).'/0';                // Interfacename\n\t\t\t\t\t\t\tif (isset(\$old_ethernets[\$i])) {\n\t\t\t\t\t\t\t\t//Previous interface found, copy from old one\n\t\t\t\t\t\t\t\t\$this ->ethernets[\$i] = \$old_ethernets[\$i];\n\t\t\t\t\t\t\t} else {\n\t\t\t\t\t\t\t\ttry{\n\t\t\t\t\t\t\t\t\t\$this -> ethernets[\$i] = new Interfc(Array('name'=> \$n, 'type' => 'ethernet'), \$i);\n\t\t\t\t\t\t\t\t} catch (Exception\$e) {\n\t\t\t\t\t\t\t\t\terror_log(date('M d H:i:s ').'ERROR:'.\$GLOBALS['messages'][40020]);\n\t\t\t\t\t\t\t\t\terror_log(date('M d H:i:s').(string) \$e);\n\t\t\t\t\t\t\t\t\treturn40020;\n\t\t\t\t\t\t\t\t}\n\t\t\t\t\t\t\t}\n\t\t\t\t\t\t\t// Setting CMD flags(virtual device and map to TAP device)\n\t\t\t\t\t\t\t\$this -> flags_eth .=' -device %NICDRIVER%,netdev=net'.\$i.',mac=50:'.sprintf('%02x', \$this ->tenant).':'.sprintf('%02x', \$this -> id / \n12).':'.sprintf('%02x', \$this-> id % 512).':00:'.sprintf('%02x', \$i);\n\t\t\t\t\t\t\t\$this ->flags_eth .= ' -netdev tap,id=net'.\$i.',ifname=vunl'.\$this ->tenant.'_'.\$this ->id.'_'.\$i.',script=no';\n\t\t\t\t\t\t}\n\t\t\t\t\t\tbreak;\n"/opt/unetlab/html/includes/__node.php

 

2、H3C vFW：

cp/opt/unetlab/html/includes/__node.php{,.`date +%s`}&&sed -i "/case'a10':/i\\\t\t\t\t\tcase 'vfw':\n\t\t\t\t\t\tfor (\$i = 0; \$i < \$this-> ethernet; \$i++) {\n\t\t\t\t\t\t\t\$n = 'Gi'.(\$i+1).'/0';                // Interfacename\n\t\t\t\t\t\t\tif (isset(\$old_ethernets[\$i])) {\n\t\t\t\t\t\t\t\t//Previous interface found, copy from old one\n\t\t\t\t\t\t\t\t\$this ->ethernets[\$i] = \$old_ethernets[\$i];\n\t\t\t\t\t\t\t} else {\n\t\t\t\t\t\t\t\ttry{\n\t\t\t\t\t\t\t\t\t\$this -> ethernets[\$i] = new Interfc(Array('name'=> \$n, 'type' => 'ethernet'), \$i);\n\t\t\t\t\t\t\t\t} catch (Exception\$e) {\n\t\t\t\t\t\t\t\t\terror_log(date('M d H:i:s ').'ERROR:'.\$GLOBALS['messages'][40020]);\n\t\t\t\t\t\t\t\t\terror_log(date('M d H:i:s').(string) \$e);\n\t\t\t\t\t\t\t\t\treturn40020;\n\t\t\t\t\t\t\t\t}\n\t\t\t\t\t\t\t}\n\t\t\t\t\t\t\t// Setting CMD flags(virtual device and map to TAP device)\n\t\t\t\t\t\t\t\$this -> flags_eth .=' -device %NICDRIVER%,netdev=net'.\$i.',mac=50:'.sprintf('%02x', \$this ->tenant).':'.sprintf('%02x', \$this -> id / \n12).':'.sprintf('%02x', \$this-> id % 512).':00:'.sprintf('%02x', \$i);\n\t\t\t\t\t\t\t\$this ->flags_eth .= ' -netdev tap,id=net'.\$i.',ifname=vunl'.\$this ->tenant.'_'.\$this ->id.'_'.\$i.',script=no';\n\t\t\t\t\t\t}\n\t\t\t\t\t\tbreak;\n"/opt/unetlab/html/includes/__node.php

 

3、H3C vLB：

cp/opt/unetlab/html/includes/__node.php{,.`date +%s`}&&sed -i "/case'a10':/i\\\t\t\t\t\tcase 'vlb':\n\t\t\t\t\t\tfor (\$i = 0; \$i < \$this-> ethernet; \$i++) {\n\t\t\t\t\t\t\t\$n = 'Gi'.(\$i+1).'/0';                // Interfacename\n\t\t\t\t\t\t\tif (isset(\$old_ethernets[\$i])) {\n\t\t\t\t\t\t\t\t//Previous interface found, copy from old one\n\t\t\t\t\t\t\t\t\$this ->ethernets[\$i] = \$old_ethernets[\$i];\n\t\t\t\t\t\t\t} else {\n\t\t\t\t\t\t\t\ttry{\n\t\t\t\t\t\t\t\t\t\$this -> ethernets[\$i] = new Interfc(Array('name'=> \$n, 'type' => 'ethernet'), \$i);\n\t\t\t\t\t\t\t\t} catch (Exception\$e) {\n\t\t\t\t\t\t\t\t\terror_log(date('M d H:i:s ').'ERROR:'.\$GLOBALS['messages'][40020]);\n\t\t\t\t\t\t\t\t\terror_log(date('M d H:i:s').(string) \$e);\n\t\t\t\t\t\t\t\t\treturn40020;\n\t\t\t\t\t\t\t\t}\n\t\t\t\t\t\t\t}\n\t\t\t\t\t\t\t// Setting CMD flags(virtual device and map to TAP device)\n\t\t\t\t\t\t\t\$this -> flags_eth .=' -device %NICDRIVER%,netdev=net'.\$i.',mac=50:'.sprintf('%02x', \$this ->tenant).':'.sprintf('%02x', \$this -> id / \n12).':'.sprintf('%02x', \$this-> id % 512).':00:'.sprintf('%02x', \$i);\n\t\t\t\t\t\t\t\$this ->flags_eth .= ' -netdev tap,id=net'.\$i.',ifname=vunl'.\$this ->tenant.'_'.\$this ->id.'_'.\$i.',script=no';\n\t\t\t\t\t\t}\n\t\t\t\t\t\tbreak;\n"/opt/unetlab/html/includes/__node.php

 

4、Huawei USG：

cp/opt/unetlab/html/includes/__node.php{,.`date +%s`}&&sed -i "/case'a10':/i\\\t\t\t\t\tcase 'usg':\n\t\t\t\t\t\tfor (\$i = 0; \$i < \$this-> ethernet; \$i++) {\n\t\t\t\t\t\t\tif (\$i==0) {\n\t\t\t\t\t\t\t\t\$n ='Gi0/'.\$i.'/0';                //Interface name\n\t\t\t\t\t\t\t}else{\n\t\t\t\t\t\t\t\t\$n ='Gi1/0/'.(\$i-1);                //Interface name\n\t\t\t\t\t\t\t}\n\t\t\t\t\t\t\tif (isset(\$old_ethernets[\$i])){\n\t\t\t\t\t\t\t\t// Previous interface found, copy from oldone\n\t\t\t\t\t\t\t\t\$this -> ethernets[\$i] =\$old_ethernets[\$i];\n\t\t\t\t\t\t\t} else {\n\t\t\t\t\t\t\t\ttry{\n\t\t\t\t\t\t\t\t\t\$this -> ethernets[\$i] = new Interfc(Array('name'=> \$n, 'type' => 'ethernet'), \$i);\n\t\t\t\t\t\t\t\t} catch (Exception\$e) {\n\t\t\t\t\t\t\t\t\terror_log(date('M d H:i:s ').'ERROR:'.\$GLOBALS['messages'][40020]);\n\t\t\t\t\t\t\t\t\terror_log(date('M d H:i:s').(string) \$e);\n\t\t\t\t\t\t\t\t\treturn40020;\n\t\t\t\t\t\t\t\t}\n\t\t\t\t\t\t\t}\n\t\t\t\t\t\t\t// Setting CMD flags(virtual device and map to TAP device)\n\t\t\t\t\t\t\t\$this -> flags_eth .=' -device %NICDRIVER%,netdev=net'.\$i.',mac=50:'.sprintf('%02x', \$this ->tenant).':'.sprintf('%02x', \$this -> id / 512).':'.sprintf('%02x', \$this-> id % 512).':00:'.sprintf('%02x', \$i);\n\t\t\t\t\t\t\t\$this ->flags_eth .= ' -netdev tap,id=net'.\$i.',ifname=vunl'.\$this ->tenant.'_'.\$this -> id.'_'.\$i.',script=no';\n\t\t\t\t\t\t}\n\t\t\t\t\t\tbreak;\n"/opt/unetlab/html/includes/__node.php

 

5、HillStone：

cp/opt/unetlab/html/includes/__node.php{,.`date +%s`}&&sed -i "/case'a10':/i\\\t\t\t\t\tcase 'hillstone':\n\t\t\t\t\t\tfor (\$i = 0; \$i <\$this -> ethernet; \$i++) {\n\t\t\t\t\t\t\t\$n = 'ethernet0/'.\$i;                // Interfacename\n\t\t\t\t\t\t\tif (isset(\$old_ethernets[\$i])) {\n\t\t\t\t\t\t\t\t//Previous interface found, copy from old one\n\t\t\t\t\t\t\t\t\$this ->ethernets[\$i] = \$old_ethernets[\$i];\n\t\t\t\t\t\t\t} else{\n\t\t\t\t\t\t\t\ttry {\n\t\t\t\t\t\t\t\t\t\$this -> ethernets[\$i] = newInterfc(Array('name' => \$n, 'type' => 'ethernet'),\$i);\n\t\t\t\t\t\t\t\t} catch (Exception \$e){\n\t\t\t\t\t\t\t\t\terror_log(date('M d H:i:s ').'ERROR:'.\$GLOBALS['messages'][40020]);\n\t\t\t\t\t\t\t\t\terror_log(date('M d H:i:s').(string) \$e);\n\t\t\t\t\t\t\t\t\treturn40020;\n\t\t\t\t\t\t\t\t}\n\t\t\t\t\t\t\t}\n\t\t\t\t\t\t\t// Setting CMD flags(virtual device and map to TAP device)\n\t\t\t\t\t\t\t\$this -> flags_eth .=' -device %NICDRIVER%,netdev=net'.\$i.',mac=50:'.sprintf('%02x', \$this ->tenant).':'.sprintf('%02x', \$this -> id / 512).':'.sprintf('%02x', \$this-> id % 512).':00:'.sprintf('%02x', \$i);\n\t\t\t\t\t\t\t\$this ->flags_eth .= ' -netdev tap,id=net'.\$i.',ifname=vunl'.\$this ->tenant.'_'.\$this ->id.'_'.\$i.',script=no';\n\t\t\t\t\t\t}\n\t\t\t\t\t\tbreak;\n"/opt/unetlab/html/includes/__node.php

 

感謝羣友[遼寧]-奧斯丁提供的腳本！

---

本篇於2017-06-14在微信公衆號EmulatedLab上發表

Maosen | 森