Rsync 故障排查整理

 

Rsync服務常見問題彙總講解：

==============================================================================================

1 客戶端的錯誤現象：No route to host

 rsync服務端開啓的iptables防火牆

   [root@nfs01 tmp]# rsync -avz /etc/hosts rsync_backup@172.16.1.41::backup

   rsync: failed to connect to 172.16.1.41: No route to host (113)

   rsync error: error in socket IO (code 10) at clientserver.c(124) [sender=3.0.6]

   異常問題解決：

   關閉rsync服務端的防火牆服務（iptables）

   [root@backup mnt]# /etc/init.d/iptables stop

   iptables: Setting chains to policy ACCEPT: filter          [  OK  ]

   iptables: Flushing firewall rules:                         [  OK  ]

   iptables: Unloading modules:                               [  OK  ]

   [root@backup mnt]# /etc/init.d/iptables status

   iptables: Firewall is not running.

 ==============================================================================================

2 ERROR: The remote path must start with a module name not a /

 rsync客戶端執行rsync命令錯誤：

   客戶端的錯誤現象：  

   [root@nfs01 tmp]# rsync -avz /etc/hosts rsync_backup@172.16.1.41::/backup

   ERROR: The remote path must start with a module name not a /

   rsync error: error starting client-server protocol (code 5) at main.c(1503) [sender=3.0.6]

   異常問題解決：

   rsync命令語法理解錯誤，::/backup是錯誤的語法，應該爲::backup(rsync模塊)

==============================================================================================

3 @ERROR: auth failed on module backup

3. @ERROR: auth failed on module oldboy

   客戶端的錯誤現象：

   [root@nfs01 tmp]# rsync -avz /etc/hosts rsync_backup@172.16.1.41::backup

Password:

@ERROR: auth failed on module backup

rsync error: error starting client-server protocol (code 5) at main.c(1503) [sender=3.0.6]

   異常問題解決：

   1. 密碼輸入錯誤，用戶名錯誤       #這裏的密碼是你設置的rsync的密碼，千萬別輸錯了！！

   2. secrets file = /etc/rsync.password指定的密碼文件和實際密碼文件名稱不一致

   3. /etc/rsync.password文件權限不是600

   4. rsync_backup:123456密碼配置文件後面注意不要有空格

   5. rsync客戶端密碼文件中只輸入密碼信息便可，不要輸入虛擬認證用戶名稱

==============================================================================================

4 @ERROR: Unknown module 'backup'

4. Unknown module 'backup'  

[root@nfs01 tmp]# rsync -avz /etc/hosts rsync_backup@172.16.1.41::backup

@ERROR: Unknown module 'backup'

rsync error: error starting client-server protocol (code 5) at main.c(1503) [sender=3.0.6]

   異常問題解決：

   一、 /etc/rsyncd.conf配置文件模塊名稱書寫錯誤

   二、配置文件中網段限制不對

==============================================================================================

5  Permission denied

[root@nfs01 tmp]# rsync -avz /etc/hosts rsync_backup@172.16.1.41::backup

Password:

sending incremental file list

hosts

rsync: mkstemp ".hosts.5z3AOA" (in backup) failed: Permission denied (13)

 

sent 196 bytes  received 27 bytes  63.71 bytes/sec

total size is 349  speedup is 1.57

rsync error: some files/attrs were not transferred (see previous errors) (code 23) at main.c(1039) [sender=3.0.6]  

   異常問題解決：

   1. 共享目錄的屬主和屬組不正確，不是rsync

   2. 共享目錄的權限不正確，不是755

==============================================================================================

6 chdir failed   

[root@nfs01 tmp]# rsync -avz /etc/hosts rsync_backup@172.16.1.41::backup

Password:

@ERROR: chdir failed

rsync error: error starting client-server protocol (code 5) at main.c(1503) [sender=3.0.6]

    異常問題解決：

    1. 備份存儲目錄沒有創建

    2. 創建的備份存儲目錄和配置文件定義不一致

    [root@backup backup]# /etc/init.d/xinetd restart

shell-init: error retrieving current directory: getcwd: cannot access parent directories: No such file or directory

Stopping xinetd:                                           [  OK  ]

Starting xinetd: shell-init: error retrieving current directory: getcwd: cannot access parent directories: No such file or directory

                                                           [  OK  ]

    說明：若是沒有備份存儲目錄，xinetd服務都不能正確啓動

==============================================================================================

7  invalid uid rsync

[root@nfs01 tmp]# rsync -avz /etc/hosts rsync_backup@172.16.1.41::backup

Password:

@ERROR: invalid uid rsync

rsync error: error starting client-server protocol (code 5) at main.c(1503) [sender=3.0.6]

    異常問題解決：

    rsync服務對應rsync虛擬用戶不存在了

==============================================================================================

8 客戶端已經配置了密碼文件，但免祕鑰登陸方式，依舊須要輸入密碼

   password file must not be other-accessible

[root@nfs01 tmp]# rsync -avz /etc/hosts rsync_backup@172.16.1.41::backup --password-file=/etc/rsync.password

password file must not be other-accessible

continuing without password file

Password:

sending incremental file list

sent 26 bytes  received 8 bytes  5.23 bytes/sec

total size is 349  speedup is 10.26

    異常問題解決：

    rsync客戶端的祕鑰文件也必須是600權限

==============================================================================================

9  rsync客戶端鏈接慢問題

錯誤日誌輸出

2017/03/08 20:14:43 [3422] params.c:Parameter() - Ignoring badly formed line in configuration file: ignore errors

2017/03/08 20:14:43 [3422] name lookup failed for 172.16.1.31: Name or service not known

2017/03/08 20:14:43 [3422] connect from UNKNOWN (172.16.1.31)

2017/03/08 20:14:43 [3422] rsync to backup/ from rsync_backup@unknown (172.16.1.31)

2017/03/08 20:14:43 [3422] receiving file list

2017/03/08 20:14:43 [3422] sent 76 bytes  received 83 bytes  total size 349

正確日誌輸出

2017/03/08 20:16:45 [3443] params.c:Parameter() - Ignoring badly formed line in configuration file: ignore errors

2017/03/08 20:16:45 [3443] connect from nfs02 (172.16.1.31)

2017/03/08 20:16:45 [3443] rsync to backup/ from rsync_backup@nfs02 (172.16.1.31)

2017/03/08 20:16:45 [3443] receiving file list

2017/03/08 20:16:45 [3443] sent 76 bytes  received 83 bytes  total size 349

    異常問題解決：

    查看日誌進行分析

==============================================================================================

10 rsync服務沒有正確啓動Connection refused (111)

 [root@oldboy-muban ~]#  rsync -avz /etc/hosts rsync_backup@172.16.1.41::backup

rsync: failed to connect to 172.16.1.41: Connection refused (111)

rsync error: error in socket IO (code 10) at clientserver.c(124) [sender=3.0.6]

解決 rsync服務沒開啓

[root@oldboy-muban ~]# rsync --daemon

[root@oldboy-muban ~]# ss -lntup |grep rsync

tcp    LISTEN     0      5                     :::873                  :::*      users:(("rsync",1434,5))

tcp    LISTEN     0      5                      *:873                   *:*      users:(("rsync",1434,4))

[root@oldboy-muban ~]# rsync -avz /etc/hosts rsync_backup@172.16.1.41::backup

Password:

sending incremental file list

hosts

 sent 196 bytes  received 27 bytes  49.56 bytes/sec

total size is 349  speedup is 1.57

 ==============================================================================================

11 port 22: Connection refused

環境：本地服務器集羣內部傳輸利用遠程ssh 報錯

利用（telnet 172.16.1.31 22） 排查服務監聽狀態後採起的解決方法

[root@oldboy-muban ~]# rsync /etc/hosts 172.16.1.31:/tmp

ssh: connect to host 172.16.1.31 port 22: Connection refused

rsync: connection unexpectedly closed (0 bytes received so far) [sender]

rsync error: error in rsync protocol data stream (code 12) at io.c(600) [sender=3.0.6]

排錯思路：

[root@oldboy-muban ~]# ping 172.16.1.31

PING 172.16.1.31 (172.16.1.31) 56(84) bytes of data.

64 bytes from 172.16.1.31: icmp_seq=1 ttl=64 time=0.628 ms

64 bytes from 172.16.1.31: icmp_seq=2 ttl=64 time=0.393 ms

64 bytes from 172.16.1.31: icmp_seq=3 ttl=64 time=1.06 ms

64 bytes from 172.16.1.31: icmp_seq=4 ttl=64 time=0.745 ms

 

[root@oldboy-muban ~]# traceroute 172.16.1.31

traceroute to 172.16.1.31 (172.16.1.31), 30 hops max, 60 byte packets

 1  nfs01 (172.16.1.31)  0.597 ms  0.189 ms  0.965 ms

/etc/init.d/iptables status

iptables: Firewall is not running.

[root@backup ~]#

[root@backup ~]# netstat -lntup|grep 22

  p        0      0 10.0.0.31:22                0.0.0.0:*                   LISTEN      1187/sshd          

故障緣由：沒法鏈接

telnet 172.16.1.31 22

解決方法：

[root@oldboy-backup-41]# vim /etc/ssh/sshd_config

#Port 22

#AddressFamily any

#ListenAddress 10.0.0.31 改成 0.0.0.0

#ListenAddress ::

總結：內網傳輸經過SSH pro 22 代表22端口連接不上

==============================================================================================

12 --passwd-file=/etc/rsync.passwd: unknown option 沒有正確輸入password文件名

報錯：--passwd-file=/etc/rsync.passwd: unknown option

錯誤案例  本地rsync.password 文件要保持一致缺乏字母都會報錯

echo "123456">>/etc/rsync.passwd

[root@nfs01 ~]# chmod 600 /etc/rsync.passwd

[root@nfs01 ~]# ll /etc/rsync.passwd

-rw------- 1 root root 7 Mar  9 13:47 /etc/rsync.passwd

[root@nfs01 ~]# rsync  -az -P /root/ rsync_backup@172.16.1.41::backup --passwd-file=/etc/rsync.passwd

rsync: --passwd-file=/etc/rsync.passwd: unknown option

rsync error: syntax or usage error (code 1) at main.c(1422) [client=3.0.6]

 正確作法：

[root@nfs01 ~]# echo "123456">>/etc/rsync.password

[root@nfs01 ~]# chmod 600 /etc/rsync.password

[root@nfs01 ~]# ll /etc/rsync.password

-rw------- 1 root root 7 Mar  9 13:49 /etc/rsync.password

rsync  -az -P /server/files/secure-20161219  rsync_backup@172.16.1.41::backup --password-file=/etc/rsync.password

sending incremental file list

secure-20161219

    51053780 100%   14.31MB/s    0:00:03 (xfer#1, to-check=0/1)

rsync: mkstemp ".secure-20161219.lcnuWA" (in backup) failed: Permission denied (13)

 

sent 2210982 bytes  received 27 bytes  491335.33 bytes/sec

total size is 51053780  speedup is 23.09

rsync error: some files/attrs were not transferred (see previous errors) (code 23) at main.c(1039) [sender=3.0.6]

 

[root@backup ~]# ls /backup/

100.log          cc.txt       optimize-init_sys.sh

anaconda-ks.cfg

      1）多是服務沒有開啓

      2）iptables SELinux

      3）本次碰見sshd傳輸受限 限制了傳輸的ip（安全）

==============================================================================================

Rsync服務端排錯思路

m  查看rsync服務配置文件路徑是否正確 /etc/rsyncd.conf

m  查看配置文件例的host allow，host deny，容許的ip網段是不是容許客戶端訪問的ip網段

m  查看配置文件中path參數裏的路徑是否存在，權限是否正確（正常應爲配置文件中的UUID參數對應的屬主和組）

m  查看rsync服務是否啓動，端口是否存在 ps -ef  netstat -lntup

m  查看iptables防火牆和SELinux是否開啓容許rsync服務經過，也能夠關閉

m  查看服務端rsync配置文件裏的密碼權限是否爲600 密碼文件格式是否正確，正確格式（用戶名：密碼）文件路徑和配置文件裏的secrect files 參數對應

m  若是是推送數據，要查看，配置rsyncd.conf 文件中用戶是否對模塊下目錄有可讀的權限

==============================================================================================

客戶端排錯思路

m  查看客戶端rsync配置的密碼文件是否爲600的權限，密碼文件格式是否正確，注意：僅須要有密碼，而且和服務端的密碼一致

m  用telnet連接rsync服務器ip地址873端口，查看服務是否啓動（可測試服務端防火牆是否阻擋telnet10.0.0.100 873）

m  客戶端執行命令是 rsync -avzP rsync_backup@10.0.0.100::backup/test/test/ --password-file=/etc/rsync.password

m  此命令要記清楚尤爲10.0.0.100::backup/test/處的雙引號及隨後的backup爲模塊名稱

==============================================================================================