VOL.2 IE6,7,8(windows vista/7 x86/x64 )單文件版三連發,歡迎你們分享

在上期 VOL.1 利用vmware ThinApp 製做非XP下能夠運行的IE6 【無插件版】(windows vista/7/8  x86/x64 )中,簡要介紹瞭如何利用vmware Thinapp製做單文件版IE6,根據你們的需求,我又作了2個版本的單文件版,這裏打包到一塊兒,供網友們下載,歡迎各位分享給你的同窗,同事或同行們windows 8下的問題正在解決中。。。)html

 下載地址:web

http://pan.baidu.com/share/link?shareid=1495689163&uk=3424911262windows

密碼:azureapp

若是運行出錯,或者有什麼更好的建議,請留言~post

解壓以後是這麼幾個文件ui

 

若是你想本身試一試抽出IE7,8的話,能夠看下面的一些提示。本覺得IE7,8會和6同樣簡單,可是過程並不順利,重啓了幾十次(你們想一想看,安裝要重啓,卸載要重啓,過程當中IE7拆裝了不下10遍)。後來查閱了一下官方文檔Virtualizing Internet Explorer 7 or 8 with ThinApp (1026674) ,最後成功了。主要流程:url

原文:spa

To Capture Internet Explorer 7 or Internet Explorer 8:

Note: The supported method of capturing the upgrade to a new version of Internet Explorer is to put the new Internet Explorer 7 or 8 installer on the desktop before the prescan and leave it there until after the postscan (see Additional Information section below).
 
Using a Windows XP capture machine:
 
    1. Prescan.
    2. Begin the Setup Capture.
      Note: Do not select the Internet Explorer button on the Setup Capture application. This feature only works for capturing Internet Explorer 6. (If you want to capture Internet Explorer 6, see Virtualizing Internet Explorer 6 with ThinApp 4.6 (1026565).)
    3. During the application installation phase of Setup Capture, capture the upgrade from Internet Explorer 6 to the version of Internet Explorer you are virtualizing (IE7 or IE8).
    4. Configure the browser by opening the newly installed native Internet Explorer.
    5. Postscan.
    6. Configure the project and package in the subsequent Setup Capture windows.
    7. When the Native Browser Redirection window appears in Setup Capture, you have the option of creating a ThinDirect.txt file. This file allows you to implement ThinDirect redirection of web pages from native Internet Explorer to the virtual Internet Explorer browser.
      For more information on setting up redirection with a ThinDirect.txt file, see:
    8. Build.

簡要翻譯:插件

捕獲IE7,IE8翻譯

注意:IE版本的升級須要在thinapp prescan(預掃描)以前,將安裝文件放到桌面上(重要)

流程:

1.prescan(預掃描)

2.開始捕獲

這裏注意選擇 don't include an Internet Explorer entry point(截圖下面第三項灰掉了是由於我已經升級了IE,你們操做的時候選擇第一項就對了)

3.開始安裝(升級)

注意這裏有一點,原文沒有指出來,IE裝完了以後是要重啓的,儘管重啓就是了,重啓完以後選擇第一項continue install (繼續安裝)。

4.設置一下升級以後的IE

5.postscan

6.設置調整

7.修改配置文件

8.編譯

過程和以前都差很少,注意描紅的部分。GOOD LUCK~

相關文章
相關標籤/搜索