樹莓派3 Raspberry系統安裝samba

默認Raspberry不自帶samb，須要手動安裝。

若是默認的rasp源很差用的話，能夠使用下面從網上找的：

deb http://mirrors.cqu.edu.cn/Raspbian/raspbian wheezy main contrib non-free rpi
deb-src http://mirrors.cqu.edu.cn/Raspbian/raspbian/ wheezy main contrib non-free rpi
deb http://mirrors.tuna.tsinghua.edu.cn/raspbian/raspbian/ wheezy main contrib non-free rpi
deb-src http://mirrors.tuna.tsinghua.edu.cn/raspbian/raspbian/ wheezy main contrib non-free rpi
deb http://mirrors.neusoft.edu.cn/raspbian/raspbian/ wheezy main contrib non-free rpi
deb-src http://mirrors.neusoft.edu.cn/raspbian/raspbian/ wheezy main contrib non-free rpi
deb http://mirrors.ustc.edu.cn/raspbian/raspbian/ wheezy main contrib non-free rpi
deb-src http://mirrors.ustc.edu.cn/raspbian/raspbian/ wheezy main contrib non-free rpi

直接install samba可能會報錯，先把錯誤提示中版本不對的依賴項卸載掉，好比個人樹莓派須要從新安裝這幾個：

apt-get remove samba-common
apt-get remove libwbclient0

而後正常安裝samba，記得不光samba服務，還有管理工具：

apt-get install samba
apt-get install samba-client
apt-get install samba-common
apt-get install samba-common-bin

裝完這些基本夠用了。

修改samba配置：在/etc/samba/smb.conf中，修改如下兩個鍵值：

browseable = yes
read only = no