WLC HA 升級步驟

這裏介紹了Cisco WLC 5520在HA模式下系統升級和AP升級的過程。

上傳升級鏡像

經過FTP上傳鏡像到WLC

查看鏡像上傳成功

(Cisco Controller) >show boot
Primary Boot Image............................... 8.5.151.0 (default)
Backup Boot Image................................ 8.5.140.0 (active)

查看AP當前運行版本

(Cisco Controller) >show ap image all

Total number of APs.............................. 69
Number of APs
        Initiated....................................... 0
        Downloading..................................... 0
        Predownloading.................................. 0
        Completed predownloading........................ 0
        Not Supported................................... 0
        Failed to Predownload........................... 0

                                                 Predownload     Predownload                                  Flexconnect
AP Name            Primary Image  Backup Image   Status          Version        Next Retry Time  Retry Count  Predownload
------------------ -------------- -------------- --------------- -------------- ---------------- ------------ --------------
pekidg-ap31-301    8.5.140.0      8.2.166.0      None            None           NA               NA
pekidg-ap22-608    8.5.140.0      8.2.166.0      None            None           NA               NA
pekidg-ap29-302    8.5.140.0      8.2.166.0      None            None           NA               NA
pekidg-ap04-N135   8.5.140.0      8.2.166.0      None            None           NA               NA
pekidg-ap10-302    8.5.140.0      8.2.166.0      None            None           NA               NA
pekidg-ap18-S062   8.5.140.0      8.2.166.0      None            None           NA               NA
pekidg-ap12-301    8.5.140.0      8.2.166.0      None            None           NA               NA
pekidg-ap02-707    8.5.140.0      8.2.166.0      None            None           NA               NA
pekidg-ap30-301    8.5.140.0      8.2.166.0      None            None           NA               NA

推送新鏡像到AP

(Cisco Controller) >config ap image predownload primary all

查看推送過程

(Cisco Controller) >show ap image all

Total number of APs.............................. 69
Number of APs
        Initiated....................................... 0
        Downloading..................................... 0
        Predownloading.................................. 69
        Completed predownloading........................ 0
        Not Supported................................... 0
        Failed to Predownload........................... 0

                                                 Predownload     Predownload                                  Flexconnect
AP Name            Primary Image  Backup Image   Status          Version        Next Retry Time  Retry Count  Predownload
------------------ -------------- -------------- --------------- -------------- ---------------- ------------ --------------
pekidg-ap31-301    8.5.140.0      8.2.166.0      Predownloading  8.5.151.0      NA               0
pekidg-ap22-608    8.5.140.0      8.2.166.0      Predownloading  8.5.151.0      NA               0
pekidg-ap29-302    8.5.140.0      8.2.166.0      Predownloading  8.5.151.0      NA               0
pekidg-ap04-N135   8.5.140.0      8.2.166.0      Predownloading  8.5.151.0      NA               0
pekidg-ap10-302    8.5.140.0      8.2.166.0      Predownloading  8.5.151.0      NA               0
pekidg-ap18-S062   8.5.140.0      8.2.166.0      Predownloading  8.5.151.0      NA               0
pekidg-ap12-301    8.5.140.0      8.2.166.0      Predownloading  8.5.151.0      NA               0
pekidg-ap02-707    8.5.140.0      8.2.166.0      Predownloading  8.5.151.0      NA               0
pekidg-ap30-301    8.5.140.0      8.2.166.0      Predownloading  8.5.151.0      NA               0
pekidg-ap20-S038   8.5.140.0      8.2.166.0      Predownloading  8.5.151.0      NA               0

推送成功

(Cisco Controller) >show ap image all

Total number of APs.............................. 69
Number of APs
        Initiated....................................... 0
        Downloading..................................... 0
        Predownloading.................................. 1
        Completed predownloading........................ 68
        Not Supported................................... 0
        Failed to Predownload........................... 0

                                                 Predownload     Predownload                                  Flexconnect
AP Name            Primary Image  Backup Image   Status          Version        Next Retry Time  Retry Count  Predownload
------------------ -------------- -------------- --------------- -------------- ---------------- ------------ --------------
pekidg-ap31-301    8.5.140.0      8.5.151.0      Complete        8.5.151.0      NA               NA
pekidg-ap22-608    8.5.140.0      8.5.151.0      Complete        8.5.151.0      NA               NA
pekidg-ap29-302    8.5.140.0      8.5.151.0      Complete        8.5.151.0      NA               NA
pekidg-ap04-N135   8.5.140.0      8.5.151.0      Complete        8.5.151.0      NA               NA
pekidg-ap10-302    8.5.140.0      8.5.151.0      Complete        8.5.151.0      NA               NA
pekidg-ap18-S062   8.5.140.0      8.5.151.0      Complete        8.5.151.0      NA               NA
pekidg-ap12-301    8.5.140.0      8.5.151.0      Complete        8.5.151.0      NA               NA
pekidg-ap02-707    8.5.140.0      8.5.151.0      Complete        8.5.151.0      NA               NA
pekidg-ap30-301    8.5.140.0      8.5.151.0      Complete        8.5.151.0      NA               NA
pekidg-ap20-S038   8.5.140.0      8.5.151.0      Complete        8.5.151.0      NA               NA

確認WLC HA 狀態正常

(Cisco Controller) >show redundancy summary
            Redundancy Mode = SSO ENABLED
                Local State = ACTIVE
                 Peer State = STANDBY HOT
                       Unit = Primary
                    Unit ID = 28:AC:9E:DF:93:D1
           Redundancy State = SSO
               Mobility MAC = 28:AC:9E:DF:93:D1
               Redundancy Port  = UP
            BulkSync Status = Complete
Average Redundancy Peer Reachability Latency = 102 Micro Seconds
Average Management Gateway Reachability Latency = 863 Micro Seconds

重啓WLC

配置00:01:10以後重啓，時間過短報錯

(Cisco Controller) >reset system both in 00:01:10 image swap reset-aps save-config
Time period is too short.

推薦配置00:02:01以後重啓，both表示重啓2臺WLC。（有可能重啓以後AP已經升級到了新的鏡像，可是WLC依然仍是之前的鏡像，這時候再敲一下下面的命令重啓WLC便可。）

(Cisco Controller) >reset system both in 00:02:01 image swap reset-aps save-config

System reset is scheduled for Nov 07 00:00:14 2019.
Current local time and date is Nov 06 23:58:13 2019.
Trap will not be generated as total delay is less than the trap time.
Active boot image will be changed before the reset.
Use 'reset system cancel' to cancel the reset.
The system has unsaved changes.
Configuration will be saved before the system reset.

我的博客：https://cswk.work