Linux系統巡檢腳本

Linux系統巡檢腳本

建立腳本文件/system/check_linux.sh

#!/bin/bash
 
check_process(){
tolprocess=ps auxf|grep DisplayMa[nager]|wc -l
 
#if [ "$tolprocess" -lt "1" ];then
if [ "$tolprocess" -ge "1" ];then
    echo 'process ok'
else
    echo 'fail'
fi
}
 
 
check_log(){
if [ -e /etc/syslog-ng/syslog-ng.conf ];then
    conlog=cat '/etc/syslog-ng/syslog-ng.conf'|grep "10.70.72.253"|wc -l
    if [ "$conlog" -ge "1" ];then
        echo 'syslog-ng ok'
    fi
elif [ -e /etc/syslog.conf ];then
    conlog=cat '/etc/syslog.conf'|grep "10.70.72.253"|wc -l
    if [ "$conlog" -ge "1" ];then
        echo 'syslog ok'
    fi
else
    echo 'log not find or error'
fi
}
 
 
check_cpuidle(){
mincpu=sar -u 2 10|grep all|awk '{print $NF}'|sort -nr|tail -1
 
if [ $(echo "${mincpu} < 20" | bc) = 1 ];then
#if [ "$mincpu" -le "20" ];then
    echo 'cpu idle is less than 20% ,please check'
else
    echo 'cpu idle is more than 20%, it is ok '
fi
 
}
 
 
check_mem(){
vmstat 2 10
}
 
 
check_disk(){
chkdsk=fdisk -l|egrep 'failed|unsynced|unavailable'|wc -l
if [ "$chkdsk" -ge "1" ];then
    echo 'fdisk check ok '
else
    echo 'fdisk check find error,please check your disk '
fi
}
 
 
check_io(){
util=sar -d 2 10|egrep -v 'x86|^$|await'|awk '{print $NF}'|sort -nr|tail -1
await=sar -d 2 10|egrep -v 'x86|^$|await'|awk '{print $(NF-2)}'|sort -nr|tail -1
 
if [ $(echo "${util} < 80" | bc) = 1 ] && [ $(echo "${await} < 100" | bc) = 1 ] ;then
    echo 'disk io check is fine'
else
    echo 'disk io use too high '
fi
 
}
 
 
check_swap(){
 
tolswap=cat /proc/meminfo|grep SwapTotal|awk '{print $2}'
#awk '/SwapTotal/{total=$2}/SwapFree/{free=$2}END{print (total-free)/1024}' /proc/meminfo
useswap=awk '/SwapTotal/{total=$2}/SwapFree/{free=$2}END{print (total-free)}' /proc/meminfo
util=awk 'BEGIN{printf "%.1f\n",'$useswap'/'$tolswap'}'
 
 
if [ $(echo "${util} < 0.3" | bc) = 1 ] || [ $(echo "${useswap} < 1024" | bc) = 1 ] ;then
    echo 'swap use is ok '
else
    echo "useswap: $useswap kb, swap util is $util"
fi
 
}
 
 
check_dmesg(){
chkdm=dmesg |egrep 'scsi reset|file system full'|wc -l
if [ "$chkdm" -ge "1" ];then
    echo 'dmesg test ok '
else
    echo 'dmesg check find error '
fi
}
 
check_boot(){
chkdm=cat /var/log/boot.msg|egrep 'scsi reset|file system full'|wc -l
if [ "$chkdm" -ge "1" ];then
    echo 'boot check fine '
else
    echo 'boot check find error '
fi
}
 
check_inode(){
maxinode=df -i|awk '{print $5}'|egrep -v 'IUse|-' |sed 's/%//g'|sort -nr|head -1
if [ $(echo "${maxinode} < 80" | bc) = 1 ];then
    echo 'inode check ok '
else
    echo 'inode used more than 80% '
fi
}
 
check_df(){
dfuse=df -HT|awk '{print $6}'|grep -v Use|sed 's/%//g'|sort -nr|head -1
if [ $(echo "${dfuse} < 80" | bc) = 1 ];then
    echo 'disk used is less than 80% ,it is ok !'
elif [ $(echo "${dfuse} > 80" | bc) = 1 ] && [ $(echo "${dfuse} < 90" | bc) = 1 ];then
    echo 'warning , disk used more than 80% and less than 90% '
else
    echo ' Critical, disk used more than 90% '
fi
}
 
 
echo '################### check process ###################'
check_process
echo '################### check syslog ####################'
check_log
echo '################### check cpuidle ###################'
check_cpuidle
echo '################### echo memory stat ################'
check_mem
echo '################### check fdisk #####################'
check_disk
echo '################### check io used ###################'
check_io
echo '################### check swap used #################'
check_swap
echo '################### check dmesg #####################'
check_dmesg
echo '################### check inode #####################'
check_inode
echo '################### check disk used #################'
check_df

更多技術分享，請關注微信公衆號 Big Data課堂