kubadm初始化找不到鏡像：node
[root@master ~]# kubeadm init --kubernetes-version=v1.16.2 --pod-network-cidr=10.244.0.0/16 --service-cidr=10.96.0.0/12 --ignore-preflight-errors=Swap [init] Using Kubernetes version: v1.16.2 [preflight] Running pre-flight checks [WARNING IsDockerSystemdCheck]: detected "cgroupfs" as the Docker cgroup driver. The recommended driver is "systemd". Please follow the guide at https://kubernetes.io/docs/setup/cri/ [WARNING Swap]: running with swap on is not supported. Please disable swap [WARNING SystemVerification]: this Docker version is not on the list of validated versions: 19.03.4. Latest validated version: 18.09 [preflight] Pulling images required for setting up a Kubernetes cluster [preflight] This might take a minute or two, depending on the speed of your internet connection [preflight] You can also perform this action in beforehand using 'kubeadm config images pull' error execution phase preflight: [preflight] Some fatal errors occurred: [ERROR ImagePull]: failed to pull image k8s.gcr.io/kube-apiserver:v1.16.2: output: Error response from daemon: Get https://k8s.gcr.io/v2/: net/http: request canceled while waiting for connection (Client.Timeout exceeded while awaiting headers) , error: exit status 1 [ERROR ImagePull]: failed to pull image k8s.gcr.io/kube-controller-manager:v1.16.2: output: Error response from daemon: Get https://k8s.gcr.io/v2/: net/http: request canceled while waiting for connection (Client.Timeout exceeded while awaiting headers) , error: exit status 1 [ERROR ImagePull]: failed to pull image k8s.gcr.io/kube-scheduler:v1.16.2: output: Error response from daemon: Get https://k8s.gcr.io/v2/: net/http: request canceled while waiting for connection (Client.Timeout exceeded while awaiting headers) , error: exit status 1 [ERROR ImagePull]: failed to pull image k8s.gcr.io/kube-proxy:v1.16.2: output: Error response from daemon: Get https://k8s.gcr.io/v2/: net/http: request canceled while waiting for connection (Client.Timeout exceeded while awaiting headers) , error: exit status 1 [ERROR ImagePull]: failed to pull image k8s.gcr.io/pause:3.1: output: Error response from daemon: Get https://k8s.gcr.io/v2/: net/http: request canceled while waiting for connection (Client.Timeout exceeded while awaiting headers) , error: exit status 1 [ERROR ImagePull]: failed to pull image k8s.gcr.io/etcd:3.3.15-0: output: Error response from daemon: Get https://k8s.gcr.io/v2/: net/http: request canceled while waiting for connection (Client.Timeout exceeded while awaiting headers) , error: exit status 1 [ERROR ImagePull]: failed to pull image k8s.gcr.io/coredns:1.6.2: output: Error response from daemon: Get https://k8s.gcr.io/v2/: net/http: request canceled while waiting for connection (Client.Timeout exceeded while awaiting headers) , error: exit status 1 [preflight] If you know what you are doing, you can make a check non-fatal with `--ignore-preflight-errors=...` To see the stack trace of this error execute with --v=5 or higher
解決方式：docker
1.查看所需鏡像：bootstrap
[root@master ~]# kubeadm config images list W1106 09:49:29.007860 4014 version.go:101] could not fetch a Kubernetes version from the internet: unable to get URL "https://dl.k8s.io/release/stable-1.txt": Get https://dl.k8s.io/release/stable-1.txt: net/http: request canceled while waiting for connection (Client.Timeout exceeded while awaiting headers) W1106 09:49:29.008592 4014 version.go:102] falling back to the local client version: v1.16.2 k8s.gcr.io/kube-apiserver:v1.16.2 k8s.gcr.io/kube-controller-manager:v1.16.2 k8s.gcr.io/kube-scheduler:v1.16.2 k8s.gcr.io/kube-proxy:v1.16.2 k8s.gcr.io/pause:3.1 k8s.gcr.io/etcd:3.3.15-0
k8s.gcr.io/coredns:1.6.2
2.kubeadm初始化默認使用的鏡像倉庫是k8s.gcr.io，爲了解決問題，咱們可使用國內雲計算廠商都提供了kubernetes的鏡像服務api
docker pull registry.cn-hangzhou.aliyuncs.com/google_containers/kube-apiserver:v1.16.2 docker pull registry.cn-hangzhou.aliyuncs.com/google_containers/kube-controller-manager:v1.16.2 docker pull registry.cn-hangzhou.aliyuncs.com/google_containers/kube-scheduler:v1.16.2 docker pull registry.cn-hangzhou.aliyuncs.com/google_containers/kube-proxy:v1.16.2 docker pull registry.cn-hangzhou.aliyuncs.com/google_containers/pause:3.1 docker pull registry.cn-hangzhou.aliyuncs.com/google_containers/etcd:3.3.15-0
3.將下載後的鏡像打上tag，來符合kudeadm init初始化時候要求app
查看已有鏡像ide
[root@master ~]# docker image list REPOSITORY TAG IMAGE ID CREATED SIZE registry.cn-hangzhou.aliyuncs.com/google_containers/kube-proxy v1.16.2 8454cbe08dc9 3 weeks ago 86.1MB registry.cn-hangzhou.aliyuncs.com/google_containers/kube-apiserver v1.16.2 c2c9a0406787 3 weeks ago 217MB registry.cn-hangzhou.aliyuncs.com/google_containers/kube-controller-manager v1.16.2 6e4bffa46d70 3 weeks ago 163MB registry.cn-hangzhou.aliyuncs.com/google_containers/kube-scheduler v1.16.2 ebac1ae204a2 3 weeks ago 87.3MB registry.cn-hangzhou.aliyuncs.com/google_containers/etcd 3.3.15-0 b2756210eeab 2 months ago 247MB registry.cn-hangzhou.aliyuncs.com/google_containers/pause 3.1 da86e6ba6ca1 22 months ago 742kB
registry.cn-hangzhou.aliyuncs.com/google_containers/coredns 1.6.2 bf261d157914 2 months ago 44.1MB
根據kubeadm config images list結果和已有鏡像打tagpost
docker tag 8454cbe08dc9 k8s.gcr.io/kube-proxy:v1.16.2 docker tag c2c9a0406787 k8s.gcr.io/kube-apiserver:v1.16.2 docker tag 6e4bffa46d70 k8s.gcr.io/kube-controller-manager:v1.16.2 docker tag ebac1ae204a2 k8s.gcr.io/kube-scheduler:v1.16.2 docker tag b2756210eeab k8s.gcr.io/etcd:3.3.15-0 docker tag da86e6ba6ca1 k8s.gcr.io/pause:3.1 docker tag bf261d157914 k8s.gcr.io/coredns:1.6.2
4.從新執行初始化fetch
[root@master ~]# kubeadm init --kubernetes-version=v1.16.2 --pod-network-cidr=10.244.0.0/16 --service-cidr=10.96.0.0/12 --ignore-preflight-errors=Swap
[init] Using Kubernetes version: v1.16.2
[preflight] Running pre-flight checks
[WARNING IsDockerSystemdCheck]: detected "cgroupfs" as the Docker cgroup driver. The recommended driver is "systemd". Please follow the guide at https://kubernetes.io/docs/setup/cri/
[WARNING Swap]: running with swap on is not supported. Please disable swap
[WARNING SystemVerification]: this Docker version is not on the list of validated versions: 19.03.4. Latest validated version: 18.09
[preflight] Pulling images required for setting up a Kubernetes cluster
[preflight] This might take a minute or two, depending on the speed of your internet connection
[preflight] You can also perform this action in beforehand using 'kubeadm config images pull'
[kubelet-start] Writing kubelet environment file with flags to file "/var/lib/kubelet/kubeadm-flags.env"
[kubelet-start] Writing kubelet configuration to file "/var/lib/kubelet/config.yaml"
[kubelet-start] Activating the kubelet service
[certs] Using certificateDir folder "/etc/kubernetes/pki"
[certs] Generating "ca" certificate and key
[certs] Generating "apiserver" certificate and key
[certs] apiserver serving cert is signed for DNS names [master kubernetes kubernetes.default kubernetes.default.svc kubernetes.default.svc.cluster.local] and IPs [10.96.0.1 172.20.0.70]
[certs] Generating "apiserver-kubelet-client" certificate and key
[certs] Generating "front-proxy-ca" certificate and key
[certs] Generating "front-proxy-client" certificate and key
[certs] Generating "etcd/ca" certificate and key
[certs] Generating "etcd/server" certificate and key
[certs] etcd/server serving cert is signed for DNS names [master localhost] and IPs [172.20.0.70 127.0.0.1 ::1]
[certs] Generating "etcd/peer" certificate and key
[certs] etcd/peer serving cert is signed for DNS names [master localhost] and IPs [172.20.0.70 127.0.0.1 ::1]
[certs] Generating "etcd/healthcheck-client" certificate and key
[certs] Generating "apiserver-etcd-client" certificate and key
[certs] Generating "sa" key and public key
[kubeconfig] Using kubeconfig folder "/etc/kubernetes"
[kubeconfig] Writing "admin.conf" kubeconfig file
[kubeconfig] Writing "kubelet.conf" kubeconfig file
[kubeconfig] Writing "controller-manager.conf" kubeconfig file
[kubeconfig] Writing "scheduler.conf" kubeconfig file
[control-plane] Using manifest folder "/etc/kubernetes/manifests"
[control-plane] Creating static Pod manifest for "kube-apiserver"
[control-plane] Creating static Pod manifest for "kube-controller-manager"
[control-plane] Creating static Pod manifest for "kube-scheduler"
[etcd] Creating static Pod manifest for local etcd in "/etc/kubernetes/manifests"
[wait-control-plane] Waiting for the kubelet to boot up the control plane as static Pods from directory "/etc/kubernetes/manifests". This can take up to 4m0s
[apiclient] All control plane components are healthy after 14.510149 seconds
[upload-config] Storing the configuration used in ConfigMap "kubeadm-config" in the "kube-system" Namespace
[kubelet] Creating a ConfigMap "kubelet-config-1.16" in namespace kube-system with the configuration for the kubelets in the cluster
[upload-certs] Skipping phase. Please see --upload-certs
[mark-control-plane] Marking the node master as control-plane by adding the label "node-role.kubernetes.io/master=''"
[mark-control-plane] Marking the node master as control-plane by adding the taints [node-role.kubernetes.io/master:NoSchedule]
[bootstrap-token] Using token: x4nrrb.jmpzg3yi79va1qcp
[bootstrap-token] Configuring bootstrap tokens, cluster-info ConfigMap, RBAC Roles
[bootstrap-token] configured RBAC rules to allow Node Bootstrap tokens to post CSRs in order for nodes to get long term certificate credentials
[bootstrap-token] configured RBAC rules to allow the csrapprover controller automatically approve CSRs from a Node Bootstrap Token
[bootstrap-token] configured RBAC rules to allow certificate rotation for all node client certificates in the cluster
[bootstrap-token] Creating the "cluster-info" ConfigMap in the "kube-public" namespace
[addons] Applied essential addon: CoreDNS
[addons] Applied essential addon: kube-proxyui
Your Kubernetes control-plane has initialized successfully!this
To start using your cluster, you need to run the following as a regular user:
mkdir -p $HOME/.kube
sudo cp -i /etc/kubernetes/admin.conf $HOME/.kube/config
sudo chown $(id -u):$(id -g) $HOME/.kube/config
You should now deploy a pod network to the cluster.
Run "kubectl apply -f [podnetwork].yaml" with one of the options listed at:
https://kubernetes.io/docs/concepts/cluster-administration/addons/
Then you can join any number of worker nodes by running the following on each as root:
kubeadm join 172.20.0.70:6443 --token 55vn5s.z2y7kvfhayky6gpi \ --discovery-token-ca-cert-hash sha256:883d1f39601b4dccdd00aa8209ba082c7f24a96e83710e3449cc9644620fcb0f