H3C與Cisco命令對比

含義	Cisco	H3C	舉例
查看	show	display	Display version
查看版本	show version	display version
取消或者關閉	no	undo
查看運行配置	show run	display current-config
	username	Local-user
	show start	display saved-configuration
	exit	Quit/logout
	Ctrl+z	quit
	Router rip	Rip
	router ospf	ospf
	router bgp	bgp
	hostname	sysname
	access-list	acl
	write	save
	erase	delet
	0	simple
	7	cipher
	logging	info-center
	encapsulation	link-protocil
清空回收站		reset recycle-bin
刪除		delete
設備支持的原來命令中的display 關鍵字就能夠用show 關鍵字來代替		# command-alias enable #command-alias mapping display show
修改AP工做模式，換comware後需輸入		ap-mode fit ap-mode fat
設定啓動文件		boot-loader file *****
AP自動發現		wlan auto-ap enable wlan ap name model **** [wlan-ap-autoap]serial-id auto
顯示 IPv4 鄰接表項	show cdp nei	display adjacent-table
查看各接口狀況		display brief interface
從 AC控制單個AP		wlan ap ***（apname） exec-control enable wlan ap ***（ apname）telnet enable
		[WA2220E-AG-hidecmd]display ar5drv 2 calibration
trunk命令	switchport mode trunk     switchport trunk allowed vlan all	switchport link-type trunk  switchport trunk permit vlan all