轉載至:https://geekflare.com/http-header-implementation/ 若有侵權 請當即聯繫我刪除。php
Do you know most the security vulnerabilities can be fixed by implementing necessary headers in the response header?nginx
Security is as essential as content and SEO of your website, and thousands of website get hacked due to misconfiguration or lack of protection.web
If you are a website owner or security engineer and looking to protect your websitefrom Clickjacking, code injection, MIME types, XSS, etc. attacks then this guide will help you.apache
In this article, I will talk about various HTTP Header to implement in multiple web servers, network edge & CDN provider for better website protection.cookie
Notes:app
httpd.conf
file.LoadModule headers_module modules/mod_headers.so
If you are using SUCURI Cloud WAF, then you don’t have to worry about adding these manually on your web server as most of them are automatically enabled.dom
HTTP Headers Listxss
X-XSS-Protection header can prevent some level of XSS (cross-site-scripting) attacks, and this is compatible with IE 8+, Chrome, Opera, Safari & Android.ide
Google, Facebook, Github use this header, and most of the penetration testing consultancy will ask you to implement this.wordpress
There are four possible ways you can configure this header.
Parameter Value | Meaning |
0 | XSS filter disabled |
1 | XSS filter enabled and sanitized the page if attack detected |
1;mode=block | XSS filter enabled and prevented rendering the page if attack detected |
1;report=http://example.com/report_URI | XSS filter enabled and reported the violation if attack detected |
Let’s implement 1;mode=block in the following web servers.
Add the following entry in httpd.conf of your Apache webserver
Header set X-XSS-Protection "1; mode=block"
Restart the apache to verify
Add the following in nginx.conf under http block
add_header X-XSS-Protection "1; mode=block";
Nginx restart is needed to get this reflected on your web page response header.
If you are using MaxCDN, then adding header is easy and on-the-fly.
Go to Edge Rules >> click 「New Rule」 and select 「Add X-XSS-Protection Header」 from the drop-down.
HSTS (HTTP Strict Transport Security) header to ensure all communication from a browser is sent over HTTPS (HTTP Secure). This prevents HTTPS click through prompts and redirects HTTP requests to HTTPS.
Before implementing this header, you must ensure all your website page is accessible over HTTPS else they will be blocked.
HSTS header is supported on all the major latest version of a browser like IE, Firefox, Opera, Safari, and Chrome. There are three parameters configuration.
Parameter Value | Meaning |
max-age | Duration (in seconds) to tell a browser that requests are available only over HTTPS. |
includeSubDomains | Configuration is valid for subdomain as well. |
preload | Use if you would like your domain to be included in the HSTS preload list |
So let’s take an example of having HSTS configured for one year including preload for domain and sub-domain.
You can implement HSTS in Apache by adding the following entry in httpd.conf file
Header set Strict-Transport-Security "max-age=31536000; includeSubDomains; preload"
Restart apache to see the results
To configure HSTS in Nginx, add the next entry in nginx.conf under server (SSL) directive
add_header Strict-Transport-Security 'max-age=31536000; includeSubDomains; preload';
As usual, you will need to restart Nginx to verify
If you are using Cloud Flare, then you can enable HSTS in just a few clicks.
Select the settings the one you need and changes will be applied on the fly.
Launch the IIS Manager and add the header by going to 「HTTP Response Headers」 for the respective site.
Restart the site
Use the X-Frame-Options header to prevent Clickjacking vulnerability on your website. By implementing this header, you instruct the browser not to embed your web page in frame/iframe. This has some limitation in browser support, so you got to check before implementing it.
You can configure the following three parameters.
Parameter Value | Meaning |
SAMEORIGIN | Frame/iframe of content is only allowed from the same site origin. |
DENY | Prevent any domain to embed your content using frame/iframe. |
ALLOW-FROM | Allow framing the content only on particular URI. |
Let’s take a look at how to implement 「DENY」 so no domain embeds the web page.
Add the following line in httpd.conf and restart the webserver to verify the results.
Header always append X-Frame-Options DENY
Add the following in nginx.conf under server directive/block.
add_header X-Frame-Options 「DENY」;
Restart to verify the results
Create an iRule with the following and associated with the respective virtual server.
when HTTP_RESPONSE { HTTP::header insert "X-FRAME-OPTIONS" "DENY" }
You don’t need to restart anything, changes are reflected in the air.
You can get this header implemented through WordPress too. Add the following in a wp-config.php file
header('X-Frame-Options: DENY);
If you are not comfortable editing the file, then you can use a plugin as explained here.
Add the header by going to 「HTTP Response Headers」 for the respective site.
Restart the site to see the results.
Prevent MIME types security risk by adding this header to your web page’s HTTP response. Having this header instruct browser to consider files types as defined and disallow content sniffing. There is only one parameter you got to add 「nosniff」.
Let’s see how to advertise this header.
You can do this by adding the below line in httpd.conf file
Header set X-Content-Type-Options nosniff
Don’t forget to restart the Apache webserver to get the configuration active.
Add the following line in nginx.conf file under server block.
add_header X-Content-Type-Options nosniff;
As usual, you got to restart the Nginx to check the results.
If you are using WordPress, then you may consider using Security Headers plugin to implement this header.
Open IIS and go to HTTP Response Headers
Click on Add and enter the Name and Value
Click OK and restart the IIS to verify the results.
Minimize the man-in-the-middle (MITM) attacks risk by pinning certificate. This is possible with HPKP (HTTP Public Key Pinning) header.
You can pin the root certificate public key or immediate certificate. At the time of writing, HPKP currently works in Firefox and Chrome and support SHA-256 hash algorithm.
There are four possible parameter configurations.
Parameter Value | Meaning |
report-uri=」url」 | Report to the specified URL if pin validation fails. This is optional. |
pin-sha256=」sha256key」 | Specify the pins here |
max-age= | Browser to remember the time in seconds that site is accessible only using one of the pinned keys. |
IncludeSubDomains | This is applicable on a subdomain as well. |
Let’s see HPKP header example from facebook.com
public-key-pins-report-only:max-age=500; pin-sha256="WoiWRyIOVNa9ihaBciRSC7XHjliYS9VwUGOIud4PB18="; pin-sha256="r/mIkG3eEpVdm+u/ko/cwxzOMo1bk4TyHIlByibiA5E="; pin-sha256="q4PO2G2cbkZhZ82+JgmRUyGMoAeozA+BSXVXQWB8XWQ="; report-uri=http://reports.fb.com/hpkp/
If this is something you need to implement on your website, then head to implementation guide written by Scott Helme.
Prevent XSS, clickjacking, code injection attacks by implementing the Content Security Policy (CSP) header in your web page HTTP response. CSP instruct browser to load allowed content to load on the website.
All browsers don’t support CSP, so you got to verify before implementing it. There are three ways you can achieve CSP headers.
If you are still using deprecated one, then you may consider upgrading to the latest one.
There are multiple parameters possible to implement CSP, and you can refer OWASP for an idea. However, let’s go through two most used parameters.
Parameter Value | Meaning |
default-src | Load everything from a defined source |
script-src | Load only scripts from a defined source |
The following example of loading everything from the same origin in various web servers.
Get the following added in httpd.conf file and restart the webserver to get effective.
Header set Content-Security-Policy "default-src 'self';"
Add the following in server block in nginx.conf file
add_header Content-Security-Policy "default-src 'self';";
Go to HTTP Response Headers for your respective site in IIS Manager and add the following
Using Adobe products like PDF, Flash, etc.? You can implement this header to instruct the browser how to handle the requests over a cross-domain. By implementing this header, you restrict loading your site’s assets from other domain to avoid resource abuse.
There are a few options available.
Value | Description |
none | no policy is allowed |
master-only | allow only the master policy |
all | everything is allowed |
by-content-only | Allow only a certain type of content. Example – XML |
by-ftp-only | applicable only for an FTP server |
If you don’t want to allow any policy.
Header set X-Permitted-Cross-Domain-Policies "none"
You should see the header like the following.
And, let’s say you need to implement master-only then add the following in nginx.conf
under server
block.
add_header X-Permitted-Cross-Domain-Policies master-only;
And the result.
Looking to control the referrer-policy of your site? There are certain privacy and security benefits. However, not all the options are supported by all the browsers, so review your requirement before the implementation.
Referrer-Policy supports the following syntax.
Value | Description |
no-referrer | Referrer information will not be sent with the request. |
no-referrer-when-downgrade | The default setting where referrer is sent to the same protocol as HTTP to HTTP, HTTPS to HTTPS. |
unsafe-url | full URL will be sent with the request. |
same-origin | Referrer will be sent only for same origin site. |
strict-origin | send only when a protocol is HTTPS |
strict-origin-when-cross-origin | the full URL will be sent over a strict protocol like HTTPS |
origin | send the origin URL in all the requests |
origin-when-cross-origin | send FULL URL on the same origin. However, send only origin URL in other cases. |
You can add the following if you want to set no-referrer.
Header set Referrer-Policy "no-referrer"
And after the restart, you should have in the response headers.
Let’s say you need to implement same-origin, so you got to add the following.
add_header Referrer-Policy same-origin;
Once configured, you should have the results below.
A new header still in experimental status is to instruct the browser to validate the connection with web servers for certificate transparency (CT). This project by Google aims to fix some of the flaws in the SSL/TLS certificate system.
The following three variables are available for Expect-CT header.
Value | Description |
max-age | In seconds, for how long browser should cache the policy. |
enforce | An optional directive to enforce the policy. |
report-uri | Browser to send a report to the specified URL when valid certificate transparency not received. |
Let’s assume you want to enforce this policy, report, and cache for 12 hours then you got to add the following.
Header set Expect-CT 'enforce, max-age=43200, report-uri="https://somedomain.com/report"'
And, here is the result.
What if you want to report and cache for 1 hour?
add_header Expect-CT 'max-age=60, report-uri="https://mydomain.com/report"';
Output would be.
Control browser’s feature such as geolocation, fullscreen, speaker, USB, autoplay, speaker, vibrate, microphone, payment, vr, etc. to enable or disable within a web application.
Let’s say you need to disable the fullscreen feature and to do so; you can add the following in httpd.conf or apache2.conf.
Header always set Feature-Policy "fullscreen 'none' "
How about adding multiple features in a single line?
That’s possible too!
Header always set Feature-Policy "fullscreen 'none'; microphone 'none'"
Restart Apache HTTP to see the result.
The above code will instruct the browser to disable fullscreen and microphone.
Let’s take another example – disable vibrate feature.
add_header Feature-Policy "vibrate none;";
Or, disable geolocation, camera, and speaker.
add_header Feature-Policy "geolocation none; camera none; speaker none;";
Here is the output after restarting Nginx.
All the Nginx configuration goes under http
block in nginx.conf or any custom file you use.
Conclusion
Securing a website is challenging, and I hope by implementing the above headers, you add a layer of security. If you are running a business site, then you may also consider using cloud-WAF like SUCURI to protect your online business.