在Blender導出格式爲STL

Blender最新版本已經支持3D打印。只需導出設計文件爲stl，便可發送到3D打印機進行打印。

Preparing your mesh

準備Mesh文件。

1. Make sure your mesh is watertight and contains no holes.

   確認Mesh文件是面狀並且沒有空洞。

2. Check the normals of your designl; they should uniformly point outwards of the design. A quick trick to determine this is to turn off the option 'Double Sided' in the Editing Buttons window. Alternatively, in the same window you can turn on displaying the face normals (under Mesh Tools More). See the screenshot below.

3. As a final check, look at the dimensions of your design. The Shapeways printers can handle objects of up to roughly 35x40x40cm. Blender itself does not use units, but the STL importer can interpret 1 unit as 1m, 1 inch or 1mm. I recommend sticking to 1mm.

Exporting your design

輸出設計文件。

This is the easy part ;-) Select File > Export > STL

Further reading

更進一步瞭解：
Check out our tutorials section for more help on the preparation and printing of your designs. I've highlighted a few that I think are good for getting started with Shapeways:

• Fixing non-manifold designs.If you've uploaded anything to Shapeways, you've undoubtably received a few 'non-manifold' or 'inverted normals' errors. This tutorial will explain what these errors mean, and how you can fix them.

• Video: Finding non-manifold areas in your models. This six-minute video shows how to find and fix non-manifold areas in your mesh.

• Creating hollow objects. Make economic prints by hollowing your designs.

• 材料選擇. A detailed overview of our material options, their properties and prices.

Thanks for shapeways to provide such detail tutorials. This is a translated version.