VirtualBox | 虛擬機啓動失敗

tags: [VirtualBox,Ubuntu,Windows,Nerwork,VM]
複製代碼

問題描述:

使用VirtualBox 打開虛擬機 啓動虛擬機時，依次出現兩個問題

第一個錯誤:

虛擬電腦控制檯-錯誤

❌ 不能爲虛擬電腦Linux 打開一個新的任務
🔽明細(D)
Nonexistent host networking interface,name 'Intel(R) Dual Band Wireless-AC 
8265'
(VERR_INTERNAL_ERROR)

返回  代碼  E_FALL (0x80004005)
組件:  ConsoleWrap
界面: Iconsole {872da645-4a9b-1727-bee2-5585105b9eed}
複製代碼

分析緣由: 多是此虛擬機是在 以前的電腦上建立的，使用以前設備上網絡配置 而後在新的電腦(當前)打開,橋接網絡接口仍是保留以前的配置,因此不存在此網絡接口

解決方案:

參考這個上面的回答 ， 能夠經過修改 .vbox 虛擬機配置文件

<BridgedInterface name="Intel(R) Dual Band Wireless-AC 8265"/>

to this:

<BridgedInterface name="當前網絡接口設備名"/>

複製代碼

Hope this helps someone else.

參考:

• Nonexistent host networking interface

• Get name of network that a network interface is connected to

---

第二個錯誤:

描述: 對於第一個問題，我嘗試切換不一樣快照來解決問題,可是都不起做用 而後出現了第二個錯誤

虛擬電腦控制檯-錯誤

❌ 不能爲虛擬電腦Linux 打開一個新的任務
🔽明細(D)

cpum#1: X86_CPUID_FEATURE_ECX_PCID is not
supported by the host but has already exposed to the guest [ver=19 pass=final]
(VERR_SSM_LOAD_CPUID_MISMATCH) .


返回  代碼  E_FALL (0x80004005)
組件:  ConsoleWrap
界面: Iconsole {872da645-4a9b-1727-bee2-5585105b9eed}
複製代碼

緣由分析:

暫無

解決方案:

最後是看到這個回答才解決問題 沒法恢復保存的Virtualbox狀態

其實第一個解答是在這裏Cannot resume saved Virtualbox state

不過當時對於這 VirtualBox使用不是很熟悉,而後這個問題指向這個討論

這個討論有兩個地方能夠指示問題所在

When the VM is in saved state, the Discard button (yellow arrow pointing down) will be enabled. It's next to the Start button. You don't have to export and import anything, nor discard snapshots from the Snapshots tab. All you do with the discard button, is clear the 'hibernate' state. Same thing that you can do to Windows that is in hibernate, and you hit a key before it starts to resume from it, and select "Continue without resume" or similar from the menu you get. Or even better, the system is in standby, and you just pull the power cord

.

Ah, thank you. Very helpful.

So this is actually a good example of what I find confusing. It appears that there are actually three different "discard" actions? There is the big yellow button (which doesn't tell you what it is going to discard -- I assumed it would discard the entire virtual machine), there is the right-click on the current state and the right-click on a snapshot, each of which corresponds to a different keystroke. Not obvious.

Anyway, thank you again!

⚠️關鍵: virtualBox 管理器菜單選項有一個 黃色的向下的箭頭按鈕,點擊這個清除(discard)狀態(state)

具體緣由,多是清除一些東西,由於是切換了快照致使第二個問題

清除以前:

點擊清除:

參考:

• Cannot resume saved Virtualbox state
• VERR_SSM_LOAD_CPUID_MISMATCH error on Jaunty