Linux下使用docker 拉取 vsftpd 鏡像搭建 Ftp 服務器，鏈接 Ftp 時遇到的錯誤（425 Failed to establish connection）

Ftp踩坑系列：

Linux上的ftp服務器 vsftpd 之配置滿天飛--設置匿名用戶訪問(不彈出用戶名密碼框）以及其餘用戶可正常上傳

ftp服務器Serv-U 設置容許自動建立不存在的目錄

FTP協議的粗淺學習--利用wireshark抓包分析相關tcp鏈接

 

1、前言

出現這個問題，在docker這類容器出現以前，緣由多是防火牆的問題：

FTP服務器通常默認使用被動模式，即，客戶端通常會和服務端的21端口創建鏈接，該鏈接用來傳輸命令。真正傳輸數據時，服務端會返回一個隨機端口，告訴客戶端新建鏈接去鏈接這個隨機端口，來傳輸數據。

通常來講，這個隨機端口，確定是沒在防火牆裏配置的，因此會沒法創建鏈接。

此時，直接先關掉防火牆便可。

 

2、docker場景下，該問題的解決方案

如今容器愈加流行，基於docker構建各種服務顯得更加方便。可是，一不注意，仍是會踩坑的。

昨天，同事就是遇到這麼個問題，說是能連上，可是涉及到數據就看不到，好比查看目錄等。

一開始，也懷疑是防火牆的問題，因而直接把防火牆關了，發現問題依舊。

 

後來通過一番定位，發現是vsftpd是基於docker的，其啓動docker容器的命令以下：

docker run -d -v /my/data/directory:/home/vsftpd -v /var/log/vsftpd/:/var/log/vsftpd/ -p 20:20 -p 21:21 -p 21100-21110:21100-21110 -e FTP_USER=ROOT -e FTP_PASS=ROOT -e PASV_MIN_PORT=21100 -e PASV_MAX_PORT=21110 -e PASV_ADDRESS=0.0.0.0 -e LOG_STDOUT=1 --name vsftpd --restart=always fauria/vsftpd

 

注意以上紅色部門，指定了各種端口相關的配置。

爲了快速查找問題，中止了舊的容器後，用下面的命令從新起了個容器，（直接改爲了使用宿主機的網絡）：

docker run -d -v /my/data/directory:/home/vsftpd -v /var/log/vsftpd/:/var/log/vsftpd/  --network=host -e FTP_USER=ROOT -e FTP_PASS=ROOT  -e LOG_STDOUT=1 --name vsftpd1.1 --restart=always fauria/vsftpd

 

進行了上述的修改後，問題解決了。

具體緣由還須要查找，找到了再更新。

 

3、基於docker構建vsftpd容器，相關配置

 

其中，DockerFile：

FROM centos:7
MAINTAINER jason2019
RUN yum install -y vsftpd
#RUN mkdir -p /data/ftp
RUN useradd -d /data/ftp -s /bin/bash ROOT -p ROOT
RUN echo "ROOT:ROOT" | chpasswd
RUN chmod 755 /data/ftp
EXPOSE 20 21
ENTRYPOINT /usr/sbin/vsftpd && tail -f /etc/passwd
#RUN systemctl start vsftp.service

 

其中，operation.txt：

docker build -t ftp:1.0 .
docker run -dit -p 21:21 -p 20:20 -p 21100-21110:21100-21110 -v /data/vsftpd.conf:/etc/vsftpd/vsftpd.conf -v /data/ftp:/data/ftp --name ftp ftp:1.0

若是使用宿主機網絡，能夠像這樣：
docker run -d -v /my/data/directory:/home/vsftpd -v /var/log/vsftpd/:/var/log/vsftpd/  --network=host -e FTP_USER=ROOT -e FTP_PASS=ROOT  -e LOG_STDOUT=1 --name vsftpd1.1 --restart=always fauria/vsftpd

 

其中，vsftpd.conf（支持匿名上傳、下載等，爲啥要匿名，由於業務的變態需求唄）：

# Example config file /etc/vsftpd/vsftpd.conf
#
# The default compiled in settings are fairly paranoid. This sample file
# loosens things up a bit, to make the ftp daemon more usable.
# Please see vsftpd.conf.5 for all compiled in defaults.
#
# READ THIS: This example file is NOT an exhaustive list of vsftpd options.
# Please read the vsftpd.conf.5 manual page to get a full idea of vsftpd's
# capabilities.
#
# Allow anonymous FTP? (Beware - allowed by default if you comment this out).
anonymous_enable=YES

#https://blog.csdn.net/bluishglc/article/details/42399439
allow_writeable_chroot=YES
#
# Uncomment this to allow local users to log in.
local_enable=YES
#
# Uncomment this to enable any form of FTP write command.
write_enable=YES
#
# Default umask for local users is 077. You may wish to change this to 022,
# if your users expect that (022 is used by most other ftpd's)
local_umask=022
#
# Uncomment this to allow the anonymous FTP user to upload files. This only
# has an effect if the above global write enable is activated. Also, you will
# obviously need to create a directory writable by the FTP user.
anon_upload_enable=YES
#
# Uncomment this if you want the anonymous FTP user to be able to create
# new directories.
anon_mkdir_write_enable=YES
anon_other_write_enable=YES
#
# Activate directory messages - messages given to remote users when they
# go into a certain directory.
dirmessage_enable=YES
#
# The target log file can be vsftpd_log_file or xferlog_file.
# This depends on setting xferlog_std_format parameter
xferlog_enable=YES
#
# Make sure PORT transfer connections originate from port 20 (ftp-data).
connect_from_port_20=YES
#
# If you want, you can arrange for uploaded anonymous files to be owned by
# a different user. Note! Using "root" for uploaded files is not
# recommended!
#chown_uploads=YES
#chown_username=whoever
#
# The name of log file when xferlog_enable=YES and xferlog_std_format=YES
# WARNING - changing this filename affects /etc/logrotate.d/vsftpd.log
#xferlog_file=/var/log/xferlog
#
# Switches between logging into vsftpd_log_file and xferlog_file files.
# NO writes to vsftpd_log_file, YES to xferlog_file
xferlog_std_format=YES
#
# You may change the default value for timing out an idle session.
#idle_session_timeout=600
#
# You may change the default value for timing out a data connection.
#data_connection_timeout=120
#
# It is recommended that you define on your system a unique user which the
# ftp server can use as a totally isolated and unprivileged user.
#nopriv_user=ftpsecure
#
# Enable this and the server will recognise asynchronous ABOR requests. Not
# recommended for security (the code is non-trivial). Not enabling it,
# however, may confuse older FTP clients.
#async_abor_enable=YES
#
# By default the server will pretend to allow ASCII mode but in fact ignore
# the request. Turn on the below options to have the server actually do ASCII
# mangling on files when in ASCII mode.
# Beware that on some FTP servers, ASCII support allows a denial of service
# attack (DoS) via the command "SIZE /big/file" in ASCII mode. vsftpd
# predicted this attack and has always been safe, reporting the size of the
# raw file.
# ASCII mangling is a horrible feature of the protocol.
#ascii_upload_enable=YES
#ascii_download_enable=YES
#
# You may fully customise the login banner string:
#ftpd_banner=Welcome to blah FTP service.
#
# You may specify a file of disallowed anonymous e-mail addresses. Apparently
# useful for combatting certain DoS attacks.
#deny_email_enable=YES
# (default follows)
#banned_email_file=/etc/vsftpd/banned_emails
#
# You may specify an explicit list of local users to chroot() to their home
# directory. If chroot_local_user is YES, then this list becomes a list of
# users to NOT chroot().
#chroot_local_user=YES
#chroot_list_enable=YES
# (default follows)
#chroot_list_file=/etc/vsftpd/chroot_list
#
# You may activate the "-R" option to the builtin ls. This is disabled by
# default to avoid remote users being able to cause excessive I/O on large
# sites. However, some broken FTP clients such as "ncftp" and "mirror" assume
# the presence of the "-R" option, so there is a strong case for enabling it.
#ls_recurse_enable=YES
#
# When "listen" directive is enabled, vsftpd runs in standalone mode and
# listens on IPv4 sockets. This directive cannot be used in conjunction
# with the listen_ipv6 directive.
listen=YES
#
# This directive enables listening on IPv6 sockets. To listen on IPv4 and IPv6
# sockets, you must run two copies of vsftpd with two configuration files.
# Make sure, that one of the listen options is commented !!
#listen_ipv6=YES

pam_service_name=vsftpd
userlist_enable=YES
tcp_wrappers=YES
anon_root=/data/ftp
no_anon_password=YES
local_root=/data/ftp
ftp_username=ROOT
pasv_enable=YES
pasv_min_port=21100
pasv_max_port=21110

 

其中，具體的選項名稱，可參考:

Linux上的ftp服務器 vsftpd 之配置滿天飛--設置匿名用戶訪問(不彈出用戶名密碼框）以及其餘用戶可正常上傳

 

另外，匿名上傳之類的話，通常還涉及到對根目錄的權限的修改，簡單起見，直接修改成777：

 

 

 

4、總結

整體來講，配置仍是很繁雜的，有問題能夠直接加我諮詢。