centos7配置802.1X

公司網絡接入須要802.1X認證，今天想把一臺測試服務器接入公司網絡，故須要配置認證

配置/etc/wpa_supplicant/wpa_supplicant.conf

ctrl_interface=/var/run/wpa_supplicant  
ctrl_interface_group=root  
ap_scan=0  
network={  
   key_mgmt=IEEE8021X  
   eap=PEAP  
   phase1="peaplabel=0"  
   phase2="auth=MSCHAPV2"  
   identity="USERNAME"  
   password="PASSWORD"  
}

腳本啓動認證和dhcp - startnet.sh（這個腳本須要開機啓動）

#!/bin/bash  

ifconfig eth0 up  
ifconfig eth0 promisc  
wpa_supplicant -i eth0 -B -Dwired -c /etc/wpa_supplicant/wpa_supplicant.conf  
sleep 1 
dhcpd eth0