ubuntu裝銳捷認證 ruijieclient 須要配置ruijie.conf

注：裝libstdc5《apt-get install libstdc++》

一、對ubuntu來講，首先安裝ruijie客戶端：ruijieclient_0.8.1svn129local-0_i386.deb

百度雲網下載：http://pan.baidu.com/s/1c06EEKo

二、配置/etc/ruijie.conf

<?xml version="1.0" encoding="UTF-8"?>
<ruijie.conf version="0.8.1svn129">
  <!--This is a sample configuration file of RuijieClient, change it appropriately according to your settings.-->
  <account>
    <Name></Name>
    <Password></Password>
  </account>
  <settings>
    <!--Network Adapter Name-->
    <NIC>eth0</NIC>
    <!--0: Standard, 1: Private-->
    <AuthenticationMode>1</AuthenticationMode>
    <EchoInterval>25</EchoInterval>
    <!--IntelligentReconnect: 0: Disable IntelligentReconnect, 1: Enable IntelligentReconnect -->
    <IntelligentReconnect>1</IntelligentReconnect>
    <!--AutoConnect: 0: Disable AutoConnect, 1: Enable AutoConnect (only available in gruijieclient) -->
    <AutoConnect>0</AutoConnect>
    <!--Fake Version for cheating server-->
    <FakeVersion>3.99</FakeVersion>
    <!--Fake IP for cheating server-->
    <FakeAddress></FakeAddress>
    <!--DHCP mode 0: Disable, 1: Enable DHCP before authentication, 2: Enable DHCP after authentication 3: DHCP after DHCP authentication andre-authentication(You should use this if your net env is DHCP)-->
    <DHCPmode>1</DHCPmode>
    <!--Add if you don't want ruijieclient to ping the default gateway-->
    <PingHost>4.2.2.2</PingHost>
  </settings>
</ruijie.conf>

上面是個人配置文件的信息。

三、運行# ruijieclient

便可上網。