Android OTA在線升級二（升級包編譯原理分析） 【轉】

本文轉載自：http://blog.csdn.net/huryjiang/article/details/7590015

1 升級包的製做

基本命令：

Ø  makeMtk [project[flavor]] new –編譯整個項目

Ø  makeMtk [project[flavor]] otapackage –編譯otapackage

Ø  /build/tools/releasetools/ota_from_target_files –n –i oldotapackage newotapackage update.zip –製做差分包

生成的otapackage爲整包，update.zip爲差分包，這兩個包拷貝到SD卡上，進入recovery模式後即可以進行升級了。–n –i 這兩個是編譯差分包的參數，-n是忽略UTC時間戳對版本升級的限制，-i是生成的差分包。由於整包和差分包都是經過./build/tools/releasetools/ota_from_target_files這個腳本生成的，這個文件的分析詳細查看，這位大俠的分析，很是的詳細：http://blog.csdn.net/zjujoe/article/details/6209393

編譯過程：

一、Android 的編譯原理

參見下面：http://www.cnblogs.com/fly-fish/archive/2012/05/07/2489274.html

下面說明otapackage的編譯原理：

(build/core/Makefile)

 

# -----------------------------------------------------------------
# host tools needed to build OTA packages

OTATOOLS :=  $(HOST_OUT_EXECUTABLES)/minigzip \
   $(HOST_OUT_EXECUTABLES)/mkbootfs \
   $(HOST_OUT_EXECUTABLES)/mkbootimg \
   $(HOST_OUT_EXECUTABLES)/fs_config \
   $(HOST_OUT_EXECUTABLES)/mkyaffs2image \
   $(HOST_OUT_EXECUTABLES)/zipalign \
   $(HOST_OUT_EXECUTABLES)/aapt \
   $(HOST_OUT_EXECUTABLES)/bsdiff \
   $(HOST_OUT_EXECUTABLES)/imgdiff \
   $(HOST_OUT_JAVA_LIBRARIES)/dumpkey.jar \
   $(HOST_OUT_JAVA_LIBRARIES)/signapk.jar \
   $(HOST_OUT_EXECUTABLES)/mkuserimg.sh \
   $(HOST_OUT_EXECUTABLES)/make_ext4fs

.PHONY: otatools
otatools: $(OTATOOLS)

# -----------------------------------------------------------------
# A zip of the directories that map to the target filesystem.
# This zip can be used to create an OTA package or filesystem image
# as a post-build step.
#
name := $(TARGET_PRODUCT)
ifeq ($(TARGET_BUILD_TYPE),debug)
  name := $(name)_debug
endif
name := $(name)-target_files-$(FILE_NAME_TAG)

intermediates := $(call intermediates-dir-for,PACKAGING,target_files)
BUILT_TARGET_FILES_PACKAGE := $(intermediates)/$(name).zip
$(BUILT_TARGET_FILES_PACKAGE): intermediates := $(intermediates)
$(BUILT_TARGET_FILES_PACKAGE): \
  zip_root := $(intermediates)/$(name)

# $(1): Directory to copy
# $(2): Location to copy it to
# The "ls -A" is to prevent "acp s/* d" from failing if s is empty.
define package_files-copy-root
  if [ -d "$(strip $(1))" -a "$$(ls -A $(1))" ]; then \
    mkdir -p $(2) && \
    $(ACP) -rd $(strip $(1))/* $(2); \
  fi
endef

built_ota_tools := \
 $(call intermediates-dir-for,EXECUTABLES,applypatch)/applypatch \
 $(call intermediates-dir-for,EXECUTABLES,applypatch_static)/applypatch_static \
 $(call intermediates-dir-for,EXECUTABLES,check_prereq)/check_prereq \
 $(call intermediates-dir-for,EXECUTABLES,updater)/updater
$(BUILT_TARGET_FILES_PACKAGE): PRIVATE_OTA_TOOLS := $(built_ota_tools)

$(BUILT_TARGET_FILES_PACKAGE): PRIVATE_RECOVERY_API_VERSION := $(RECOVERY_API_VERSION)

ifeq ($(TARGET_RELEASETOOLS_EXTENSIONS),)
# default to common dir for device vendor
$(BUILT_TARGET_FILES_PACKAGE): tool_extensions := $(TARGET_DEVICE_DIR)/../common
else
$(BUILT_TARGET_FILES_PACKAGE): tool_extensions := $(TARGET_RELEASETOOLS_EXTENSIONS)
endif

# Depending on the various images guarantees that the underlying
# directories are up-to-date.
$(BUILT_TARGET_FILES_PACKAGE): \
  $(INSTALLED_BOOTIMAGE_TARGET) \
  $(INSTALLED_RADIOIMAGE_TARGET) \
  $(INSTALLED_RECOVERYIMAGE_TARGET) \
  $(INSTALLED_SYSTEMIMAGE) \
  $(INSTALLED_USERDATAIMAGE_TARGET) \
  $(INSTALLED_ANDROID_INFO_TXT_TARGET) \
  $(built_ota_tools) \
  $(APKCERTS_FILE) \
  $(HOST_OUT_EXECUTABLES)/fs_config \
  | $(ACP)
 @echo "Package target files: $@"
 $(hide) rm -rf $@ $(zip_root)
 $(hide) mkdir -p $(dir $@) $(zip_root)
 @# Components of the recovery image
 $(hide) mkdir -p $(zip_root)/RECOVERY
 $(hide) $(call package_files-copy-root, \
  $(TARGET_RECOVERY_ROOT_OUT),$(zip_root)/RECOVERY/RAMDISK)
ifdef INSTALLED_KERNEL_TARGET
 $(hide) $(ACP) $(INSTALLED_KERNEL_TARGET) $(zip_root)/RECOVERY/kernel
endif
ifdef INSTALLED_2NDBOOTLOADER_TARGET
 $(hide) $(ACP) \
  $(INSTALLED_2NDBOOTLOADER_TARGET) $(zip_root)/RECOVERY/second
endif
ifdef BOARD_KERNEL_CMDLINE
 $(hide) echo "$(BOARD_KERNEL_CMDLINE)" > $(zip_root)/RECOVERY/cmdline
endif
ifdef BOARD_KERNEL_BASE
 $(hide) echo "$(BOARD_KERNEL_BASE)" > $(zip_root)/RECOVERY/base
endif
ifdef BOARD_KERNEL_PAGESIZE
 $(hide) echo "$(BOARD_KERNEL_PAGESIZE)" > $(zip_root)/RECOVERY/pagesize
endif
 @# Components of the boot image
 $(hide) mkdir -p $(zip_root)/BOOT
 $(hide) $(call package_files-copy-root, \
  $(TARGET_ROOT_OUT),$(zip_root)/BOOT/RAMDISK)
ifdef INSTALLED_KERNEL_TARGET
 $(hide) $(ACP) $(INSTALLED_KERNEL_TARGET) $(zip_root)/BOOT/kernel
endif
ifdef INSTALLED_2NDBOOTLOADER_TARGET
 $(hide) $(ACP) \
  $(INSTALLED_2NDBOOTLOADER_TARGET) $(zip_root)/BOOT/second
endif
ifdef BOARD_KERNEL_CMDLINE
 $(hide) echo "$(BOARD_KERNEL_CMDLINE)" > $(zip_root)/BOOT/cmdline
endif
ifdef BOARD_KERNEL_BASE
 $(hide) echo "$(BOARD_KERNEL_BASE)" > $(zip_root)/BOOT/base
endif
ifdef BOARD_KERNEL_PAGESIZE
 $(hide) echo "$(BOARD_KERNEL_PAGESIZE)" > $(zip_root)/BOOT/pagesize
endif
 $(hide) $(foreach t,$(INSTALLED_RADIOIMAGE_TARGET),\
             mkdir -p $(zip_root)/RADIO; \
             $(ACP) $(t) $(zip_root)/RADIO/$(notdir $(t));)
 @# Contents of the system image
 $(hide) $(call package_files-copy-root, \
  $(SYSTEMIMAGE_SOURCE_DIR),$(zip_root)/SYSTEM)
 @# Contents of the data image
 $(hide) $(call package_files-copy-root, \
  $(TARGET_OUT_DATA),$(zip_root)/DATA)
 @# Extra contents of the OTA package
 $(hide) mkdir -p $(zip_root)/OTA/bin
 $(hide) $(ACP) $(INSTALLED_ANDROID_INFO_TXT_TARGET) $(zip_root)/OTA/
 $(hide) $(ACP) $(PRIVATE_OTA_TOOLS) $(zip_root)/OTA/bin/
 @# Files that do not end up in any images, but are necessary to
 @# build them.
 $(hide) mkdir -p $(zip_root)/META
 $(hide) $(ACP) $(APKCERTS_FILE) $(zip_root)/META/apkcerts.txt
 $(hide) echo "$(PRODUCT_OTA_PUBLIC_KEYS)" > $(zip_root)/META/otakeys.txt
 $(hide) echo "recovery_api_version=$(PRIVATE_RECOVERY_API_VERSION)" > $(zip_root)/META/misc_info.txt
ifdef BOARD_FLASH_BLOCK_SIZE
 $(hide) echo "blocksize=$(BOARD_FLASH_BLOCK_SIZE)" >> $(zip_root)/META/misc_info.txt
endif
ifdef BOARD_BOOTIMAGE_PARTITION_SIZE
 $(hide) echo "boot_size=$(BOARD_BOOTIMAGE_PARTITION_SIZE)" >> $(zip_root)/META/misc_info.txt
endif
ifdef BOARD_RECOVERYIMAGE_PARTITION_SIZE
 $(hide) echo "recovery_size=$(BOARD_RECOVERYIMAGE_PARTITION_SIZE)" >> $(zip_root)/META/misc_info.txt
endif
ifdef BOARD_SYSTEMIMAGE_PARTITION_SIZE
 $(hide) echo "system_size=$(BOARD_SYSTEMIMAGE_PARTITION_SIZE)" >> $(zip_root)/META/misc_info.txt
endif
ifdef BOARD_USERDATAIMAGE_PARTITION_SIZE
 $(hide) echo "userdata_size=$(BOARD_USERDATAIMAGE_PARTITION_SIZE)" >> $(zip_root)/META/misc_info.txt
endif
 $(hide) echo "tool_extensions=$(tool_extensions)" >> $(zip_root)/META/misc_info.txt
ifdef mkyaffs2_extra_flags
 $(hide) echo "mkyaffs2_extra_flags=$(mkyaffs2_extra_flags)" >> $(zip_root)/META/misc_info.txt
endif
 @# Zip everything up, preserving symlinks
 $(hide) (cd $(zip_root) && zip -qry ../$(notdir $@) .)
 @# Run fs_config on all the system files in the zip, and save the output
 $(hide) zipinfo -1 $@ | awk -F/ 'BEGIN { OFS="/" } /^SYSTEM\// {$$1 = "system"; print}' | $(HOST_OUT_EXECUTABLES)/fs_config > $(zip_root)/META/filesystem_config.txt
 $(hide) (cd $(zip_root) && zip -q ../$(notdir $@) META/filesystem_config.txt)

target-files-package: $(BUILT_TARGET_FILES_PACKAGE)

ifneq ($(TARGET_SIMULATOR),true)
ifneq ($(TARGET_PRODUCT),sdk)
ifneq ($(TARGET_DEVICE),generic)
ifneq ($(TARGET_NO_KERNEL),true)
ifneq ($(recovery_fstab),)

# -----------------------------------------------------------------
# OTA update package

name := $(TARGET_PRODUCT)
ifeq ($(TARGET_BUILD_TYPE),debug)
  name := $(name)_debug
endif
name := $(name)-ota-$(FILE_NAME_TAG)

INTERNAL_OTA_PACKAGE_TARGET := $(PRODUCT_OUT)/$(name).zip

$(INTERNAL_OTA_PACKAGE_TARGET): KEY_CERT_PAIR := $(DEFAULT_KEY_CERT_PAIR)

$(INTERNAL_OTA_PACKAGE_TARGET): $(BUILT_TARGET_FILES_PACKAGE) $(OTATOOLS)
 @echo "Package OTA: $@"
 $(hide) ./build/tools/releasetools/ota_from_target_files -v \
    -n \
    -p $(HOST_OUT) \
           -k $(KEY_CERT_PAIR) \
           $(BUILT_TARGET_FILES_PACKAGE) $@

.PHONY: otapackage
otapackage: $(INTERNAL_OTA_PACKAGE_TARGET)

# -----------------------------------------------------------------
# The update package

name := $(TARGET_PRODUCT)
ifeq ($(TARGET_BUILD_TYPE),debug)
  name := $(name)_debug
endif
name := $(name)-img-$(FILE_NAME_TAG)

INTERNAL_UPDATE_PACKAGE_TARGET := $(PRODUCT_OUT)/$(name).zip

ifeq ($(TARGET_RELEASETOOLS_EXTENSIONS),)
# default to common dir for device vendor
$(INTERNAL_UPDATE_PACKAGE_TARGET): extensions := $(TARGET_DEVICE_DIR)/../common
else
$(INTERNAL_UPDATE_PACKAGE_TARGET): extensions := $(TARGET_RELEASETOOLS_EXTENSIONS)
endif

$(INTERNAL_UPDATE_PACKAGE_TARGET): $(BUILT_TARGET_FILES_PACKAGE) $(OTATOOLS)
 @echo "Package: $@"
 $(hide) ./build/tools/releasetools/img_from_target_files -v \
    -s $(extensions) \
    -p $(HOST_OUT) \
    $(BUILT_TARGET_FILES_PACKAGE) $@

.PHONY: updatepackage
updatepackage: $(INTERNAL_UPDATE_PACKAGE_TARGET)

endif    # recovery_fstab is defined
endif    # TARGET_NO_KERNEL != true
endif    # TARGET_DEVICE != generic
endif    # TARGET_PRODUCT != sdk
endif    # TARGET_SIMULATOR != true

 

 上面紅色標註的地方說明：

一、OTATOOLS 升級包製做的差分工具

二、$(hide) ./build/tools/releasetools/ota_from_target_files -v \
    -n \調用腳本生成otapackage包，這裏Android源碼是沒有-n這個參數的，沒有這個參數會致使版本之間沒法升級，-n忽略ro.build.date.utc檢查。