VirtualBox網絡配置

1.配置host-only:主機通訊網絡

修改 /etc/sysconfig/network-script/ifcfg-eth0 注意HWADDR和VirtualBox網絡配置裏host-only模式mac一致oop

HWADDR=08:00:27:FE:24:46
TYPE=Ethernet
BOOTPROTO=static
NETMASK=255.255.255.0
IPADDR=192.168.56.100
GATEWAY=192.168.56.254
DEFROUTE=yes
PEERDNS=yes
PEERROUTES=yes
IPV4_FAILURE_FATAL=no
IPV6INIT=yes
IPV6_AUTOCONF=yes
IPV6_DEFROUTE=yes
IPV6_PEERDNS=yes
IPV6_PEERROUTES=yes
IPV6_FAILURE_FATAL=no
NAME=eth0
UUID=642a94f2-30e8-4db7-91ec-3af99a8f2a5f
ONBOOT=yes

2.配置網絡地址轉換(NAT):上外網code

修改 /etc/sysconfig/network-script/ifcfg-eth1 注意HWADDR和VirtualBox網絡配置裏NAT模式mac一致ip

HWADDR=08:00:27:81:A6:34
TYPE=Ethernet
BOOTPROTO=dhcp
NAME=eth1
ONBOOT=yes

3.確認配置ast

[root@c7 ~]# ip addr
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN 
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    inet 127.0.0.1/8 scope host lo
       valid_lft forever preferred_lft forever
    inet6 ::1/128 scope host 
       valid_lft forever preferred_lft forever
2: enp0s3: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000
    link/ether 08:00:27:fe:24:46 brd ff:ff:ff:ff:ff:ff
    inet 192.168.56.101/24 brd 192.168.56.255 scope global enp0s3
       valid_lft forever preferred_lft forever
    inet6 fe80::a00:27ff:fefe:2446/64 scope link 
       valid_lft forever preferred_lft forever
3: enp0s8: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000
    link/ether 08:00:27:81:a6:34 brd ff:ff:ff:ff:ff:ff
    inet 10.0.3.15/24 brd 10.0.3.255 scope global dynamic enp0s8
       valid_lft 86239sec preferred_lft 86239sec
    inet6 fe80::a00:27ff:fe81:a634/64 scope link 
       valid_lft forever preferred_lft forever
[root@c7 ~]# ping baidu.com
PING baidu.com (123.125.115.110) 56(84) bytes of data.
64 bytes from 123.125.115.110: icmp_seq=1 ttl=53 time=23.7 ms
64 bytes from 123.125.115.110: icmp_seq=2 ttl=53 time=24.4 ms
64 bytes from 123.125.115.110: icmp_seq=3 ttl=53 time=25.4 ms
相關文章
相關標籤/搜索