進口無堵塞排污泵原理特色及品牌（圖）

時間 2021-01-19

標籤 html 安全 this 代理 rest xml htm blog 欄目 HTML 简体版

原文原文鏈接

您的位置：德國托馬斯閥門（Thomas） - 公司新聞html

進口無堵塞排污泵原理特色及品牌（圖）

做者：托馬斯·貝爾森·伍德發佈時間：2021-01-16 13:05:06點擊：201

進口無堵塞排污泵原理特色

進口無堵塞排污泵是在德國托馬斯(Thomas)先進技術的基礎上，結合排污泵的使用特色而研製成功的新一代泵類產品，具備節能效果顯著、防纏繞、無堵塞、自動安裝和自動控制等特色。在排送固體顆粒和長纖維垃圾方面，具備獨特效果。

產品特色

一、採用獨特的單片或雙片葉輪結構，大大提升了污物經過能力，能有效的經過泵口徑5倍纖維物質與直徑爲泵口徑約50%的固體顆粒。

二、機械密封採用新型硬質耐腐的鈦化鎢材料，可以使泵安全連續運行8000小時以上。

三、總體結構緊湊、體積小、噪音小、節能效果顯著，檢修方便、無需建泵房，潛入水中便可工做，大大減小工程造價。

四、該泵密封油室內設置有高精度抗干擾漏水檢測傳感器，定子繞組內預埋了熱敏元件，對水泵電機自動保護。

五、可根據用戶須要配備全自動控制櫃，對泵的漏水、漏電、過載及超溫等進行自動保護，提升了產品的安全性與可靠性。

六、浮球開關可根據所需液位變化，自動控制泵的起動與中止，不需專人看管，使用極爲方便。

七、可根據用戶須要配備雙導軌自動耦合安裝系統，它給安裝、維修帶來更大方便，人可沒必要爲此而進入污水坑。

八、可以在全揚程內使用，而保證電機不會過載。

九、有兩種不一樣的安裝方式，固定式自動耦合安裝系統，移動自由安裝。

主要用途

適用於化工、石油、製藥、採礦、造紙工業、水泥廠、鍊鋼廠、電廠、煤加工工業，以及城市污水處理廠排水系統、市政工程、建築工地等行業輸送帶顆粒的污水、污物，也可用於抽送清水及帶腐蝕性介質。

Non-clogging sewage pump is based on the advanced technology of Thomas (Thomas), combined with the use of sewage pump characteristics of the successful development of a new generation of pump products, with significant energy saving, anti-winding, non-clogging, automatic installation and automatic control And so on. In the discharge of solid particles and long fiber garbage, has a unique effect.

Features

1, the use of a unique single or double impeller structure, greatly improving the dirt through the ability to effectively pass the pump diameter 5 times the fiber material and diameter of the pump diameter of about 50% of the solid particles.

2, the mechanical seal with a new hard corrosion-resistant titanium tungsten material, the pump can run continuously for more than 8000 hours.

3, the overall structure of compact, small size, low noise, energy saving effect is significant, easy maintenance, no need to build pump room, dive into the water to work, greatly reducing the cost of the project.

4, the pump sealed oil room is equipped with high precision anti-jamming leak detection sensor, the stator winding embedded thermal elements, the pump motor automatic protection.

5, according to user needs with automatic control cabinet, the pump leakage, leakage, overload and over-temperature, such as automatic protection, improve product safety and reliability.

6, the float switch can be based on the required level changes, automatic control of the pump start and stop, no special care, the use of extremely convenient.

7, according to user needs with dual rail automatic coupling installation system, it is to install, repair more convenient, people do not have to enter the sewage pits for this.

8, can be used in the whole head, and to ensure that the motor will not overload.

9, there are two different installation methods, fixed automatic coupling installation system, mobile free installation.

The main purpose

It is suitable for sewage, sewage, sewage, sewage, sewage, sewage, sewage, sewage, sewage, sewage, sewage, sewage, etc. in the industry, such as chemical industry, petroleum, pharmaceutical, mining, paper industry, cement plant, steelmaking plant, power plant, coal processing industry, and urban sewage treatment plant drainage system, municipal engineering, Can also be used for pumping water and corrosive media.安全

進口無堵塞排污泵品牌

德國托馬斯閥門集團於1933年建立於德國魯爾工業區，也是世界最重要的工業區。位於德國西部、萊茵河下游支流魯爾河與利珀河之間的地區。德國托馬斯閥門集團是以生產高品質、先進的閥門、測量及控制系統而享譽全球的跨國性生產企業。採用世界先進的設備及生產工藝，全部產品都在嚴格的質量體系監控下完成做業。並在各大洲幾十個國家擁有子公司及分支機構。

上一篇：進口管道排污泵原理特色及品牌（圖）下一篇：進口自吸式排污泵原理特色及品牌（圖）

相關產品