Python中yield的理解和用法

【簡單總結】

generator（生成器）

是一次性的iterator（迭代器，例如：list、string、files），但只能遍歷迭代一次。好處是，只在迭代（調用）的時候佔用臨時內存，每一次迭代完成以後，下一次迭代的元素就會重複使用當前使用的內存（上一次迭代的元素被丟棄），這樣始終只佔用一個元素的內存大小。而不像普通的iterator那樣把全部的迭代元素所有放在內存中，雖然可供反覆迭代使用，卻形成了內存的浪費。

yield

用在函數中，做用和return相似，不一樣的是yield將返回一個generator，做爲函數的返回值。（注意：當你調用函數時，函數中的代碼並無運行，而是返回一個generator對象。）而後，當用這個generator來迭代的時候，將從for循環的首個元素開始，依次迭代（每次都丟棄上一個迭代元素）。

 

(參考自StackOverflow上的高票解答：What does the 「yield」 keyword do?)

 

 

To understand what yield does, you must understand what generators are. And before generators come iterables.

Iterables

When you create a list, you can read its items one by one. Reading its items one by one is called iteration:

>>> mylist = [1, 2, 3]
>>> for i in mylist:
...    print(i)
1
2
3

mylist is an iterable. When you use a list comprehension, you create a list, and so an iterable:

>>> mylist = [x*x for x in range(3)]
>>> for i in mylist:
...    print(i)
0
1
4

Everything you can use "for... in..." on is an iterable; lists, strings, files...

These iterables are handy because you can read them as much as you wish, but you store all the values in memory and this is not always what you want when you have a lot of values.

Generators

Generators are iterators, a kind of iterable you can only iterate over once. Generators do not store all the values in memory, they generate the values on the fly:

>>> mygenerator = (x*x for x in range(3))
>>> for i in mygenerator:
...    print(i)
0
1
4

It is just the same except you used () instead of []. BUT, you cannot perform for i in mygenerator a second time since generators can only be used once: they calculate 0, then forget about it and calculate 1, and end calculating 4, one by one.

Yield

yield is a keyword that is used like return, except the function will return a generator.

>>> def createGenerator():
...    mylist = range(3)
...    for i in mylist:
...        yield i*i
...
>>> mygenerator = createGenerator() # create a generator
>>> print(mygenerator) # mygenerator is an object!
<generator object createGenerator at 0xb7555c34>
>>> for i in mygenerator:
...     print(i)
0
1
4

Here it's a useless example, but it's handy when you know your function will return a huge set of values that you will only need to read once.

To master yield, you must understand that when you call the function, the code you have written in the function body does not run. The function only returns the generator object, this is a bit tricky :-)

Then, your code will continue from where it left off each time for uses the generator.

Now the hard part:

The first time the for calls the generator object created from your function, it will run the code in your function from the beginning until it hits yield, then it'll return the first value of the loop. Then, each other call will run the loop you have written in the function one more time, and return the next value, until there is no value to return.

The generator is considered empty once the function runs, but does not hit yield anymore. It can be because the loop had come to an end, or because you do not satisfy an "if/else" anymore.

---

Your code explained

Generator:

# Here you create the method of the node object that will return the generator
def _get_child_candidates(self, distance, min_dist, max_dist):

    # Here is the code that will be called each time you use the generator object:

    # If there is still a child of the node object on its left
    # AND if distance is ok, return the next child
    if self._leftchild and distance - max_dist < self._median:
        yield self._leftchild

    # If there is still a child of the node object on its right
    # AND if distance is ok, return the next child
    if self._rightchild and distance + max_dist >= self._median:
        yield self._rightchild

    # If the function arrives here, the generator will be considered empty
    # there is no more than two values: the left and the right children

Caller:

# Create an empty list and a list with the current object reference
result, candidates = list(), [self]

# Loop on candidates (they contain only one element at the beginning)
while candidates:

    # Get the last candidate and remove it from the list
    node = candidates.pop()

    # Get the distance between obj and the candidate
    distance = node._get_dist(obj)

    # If distance is ok, then you can fill the result
    if distance <= max_dist and distance >= min_dist:
        result.extend(node._values)

    # Add the children of the candidate in the candidates list
    # so the loop will keep running until it will have looked
    # at all the children of the children of the children, etc. of the candidate
    candidates.extend(node._get_child_candidates(distance, min_dist, max_dist))

return result

This code contains several smart parts:

• The loop iterates on a list, but the list expands while the loop is being iterated :-) It's a concise way to go through all these nested data even if it's a bit dangerous since you can end up with an infinite loop. In this case, candidates.extend(node._get_child_candidates(distance, min_dist, max_dist)) exhausts all the values of the generator, but while keeps creating new generator objects which will produce different values from the previous ones since it's not applied on the same node.

• The extend() method is a list object method that expects an iterable and adds its values to the list.

Usually we pass a list to it:

>>> a = [1, 2]
>>> b = [3, 4]
>>> a.extend(b)
>>> print(a)
[1, 2, 3, 4]

But in your code it gets a generator, which is good because:

1. You don't need to read the values twice.
2. You may have a lot of children and you don't want them all stored in memory.

And it works because Python does not care if the argument of a method is a list or not. Python expects iterables so it will work with strings, lists, tuples and generators! This is called duck typing and is one of the reason why Python is so cool. But this is another story, for another question...

You can stop here, or read a little bit to see an advanced use of a generator:

Controlling a generator exhaustion

>>> class Bank(): # Let's create a bank, building ATMs
...    crisis = False
...    def create_atm(self):
...        while not self.crisis:
...            yield "$100"
>>> hsbc = Bank() # When everything's ok the ATM gives you as much as you want
>>> corner_street_atm = hsbc.create_atm()
>>> print(corner_street_atm.next())
$100
>>> print(corner_street_atm.next())
$100
>>> print([corner_street_atm.next() for cash in range(5)])
['$100', '$100', '$100', '$100', '$100']
>>> hsbc.crisis = True # Crisis is coming, no more money!
>>> print(corner_street_atm.next())
<type 'exceptions.StopIteration'>
>>> wall_street_atm = hsbc.create_atm() # It's even true for new ATMs
>>> print(wall_street_atm.next())
<type 'exceptions.StopIteration'>
>>> hsbc.crisis = False # The trouble is, even post-crisis the ATM remains empty
>>> print(corner_street_atm.next())
<type 'exceptions.StopIteration'>
>>> brand_new_atm = hsbc.create_atm() # Build a new one to get back in business
>>> for cash in brand_new_atm:
...    print cash
$100
$100
$100
$100
$100
$100
$100
$100
$100
...

Note: For Python 3, useprint(corner_street_atm.__next__()) or print(next(corner_street_atm))

It can be useful for various things like controlling access to a resource.

Itertools, your best friend

The itertools module contains special functions to manipulate iterables. Ever wish to duplicate a generator? Chain two generators? Group values in a nested list with a one-liner? Map / Zipwithout creating another list?

Then just import itertools.

An example? Let's see the possible orders of arrival for a four-horse race:

>>> horses = [1, 2, 3, 4]
>>> races = itertools.permutations(horses)
>>> print(races)
<itertools.permutations object at 0xb754f1dc>
>>> print(list(itertools.permutations(horses)))
[(1, 2, 3, 4),
 (1, 2, 4, 3),
 (1, 3, 2, 4),
 (1, 3, 4, 2),
 (1, 4, 2, 3),
 (1, 4, 3, 2),
 (2, 1, 3, 4),
 (2, 1, 4, 3),
 (2, 3, 1, 4),
 (2, 3, 4, 1),
 (2, 4, 1, 3),
 (2, 4, 3, 1),
 (3, 1, 2, 4),
 (3, 1, 4, 2),
 (3, 2, 1, 4),
 (3, 2, 4, 1),
 (3, 4, 1, 2),
 (3, 4, 2, 1),
 (4, 1, 2, 3),
 (4, 1, 3, 2),
 (4, 2, 1, 3),
 (4, 2, 3, 1),
 (4, 3, 1, 2),
 (4, 3, 2, 1)]

Understanding the inner mechanisms of iteration

Iteration is a process implying iterables (implementing the __iter__() method) and iterators (implementing the __next__() method). Iterables are any objects you can get an iterator from. Iterators are objects that let you iterate on iterables.

There is more about it in this article about how for loops work.