lsblk命令詳解
lsblk命令詳解
lsblk命令用來查看block設備的信息.html
主要應用場景: 獲取wwnid,獲取塊設備列表,獲取塊設備類型(ssd,hdd),獲取塊設備的size等信息.node
數據來源: /sys/dev/blocklinux
返回碼:json
0: success 1: failure 32: 找不到全部指定設備 64: 一些設備找到了,一些設備沒找到
相似的命令:dom
findmnt , blkid, ls
幫助信息:ide
➜ ~ lsblk --help
Usage:
lsblk [options] [<device> ...]
List information about block devices.
選項：
-a, --all print all devices
-b, --bytes print SIZE in bytes rather than in human readable format
-d, --nodeps don't print slaves or holders
-D, --discard print discard capabilities
-e, --exclude <list> exclude devices by major number (default: RAM disks)
-f, --fs output info about filesystems
-i, --ascii use ascii characters only
-I, --include <list> show only devices with specified major numbers
-J, --json use JSON output format
-l, --list use list format output
-m, --perms output info about permissions
-n, --noheadings don't print headings
-o, --output <list> output columns
-O, --output-all output all columns
-p, --paths print complete device path
-P, --pairs use key="value" output format
-r, --raw use raw output format
-s, --inverse inverse dependencies
-S, --scsi output info about SCSI devices
-t, --topology output info about topology
-x, --sort <column> sort output by <column>
-h, --help display this help and exit
-V, --version output version information and exit
Available columns (for --output):
NAME device name
KNAME internal kernel device name
MAJ:MIN major:minor device number
FSTYPE filesystem type
MOUNTPOINT where the device is mounted
LABEL filesystem LABEL
UUID filesystem UUID
PARTTYPE partition type UUID
PARTLABEL partition LABEL
PARTUUID partition UUID
PARTFLAGS partition flags
RA read-ahead of the device
RO read-only device
RM removable device
HOTPLUG removable or hotplug device (usb, pcmcia, ...)
MODEL device identifier
SERIAL disk serial number
SIZE size of the device
STATE state of the device
OWNER user name
GROUP group name
MODE device node permissions
ALIGNMENT alignment offset
MIN-IO minimum I/O size
OPT-IO optimal I/O size
PHY-SEC physical sector size
LOG-SEC logical sector size
ROTA rotational device, 0是不可旋轉(ssd),1是可旋轉(hdd)
SCHED I/O scheduler name
RQ-SIZE request queue size
TYPE device type
DISC-ALN discard alignment offset
DISC-GRAN discard granularity
DISC-MAX discard max bytes
DISC-ZERO discard zeroes data
WSAME write same max bytes
WWN unique storage identifier
RAND adds randomness
PKNAME internal parent kernel device name
HCTL Host:Channel:Target:Lun for SCSI
TRAN device transport type
SUBSYSTEMS de-duplicated chain of subsystems
REV device revision
VENDOR device vendor
lsblk 命令輸出 default 參數是-a, --alloop
➜ ~ lsblk NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT loop1 7:1 0 55.8M 1 loop /snap/kata-containers/288 sdd 8:48 0 1.8T 0 disk └─sdd1 8:49 0 1.8T 0 part sdb 8:16 0 119.2G 0 disk ├─sdb2 8:18 0 915M 0 part └─sdb1 8:17 0 118.4G 0 part loop4 7:4 0 69.8M 1 loop /snap/kata-containers/352 sr0 11:0 1 1024M 0 rom loop2 7:2 0 89.4M 1 loop /snap/core/6818 loop0 7:0 0 88.4M 1 loop /snap/core/6964 sde 8:64 0 1.8T 0 disk ├─sde2 8:66 0 1.8T 0 part └─sde1 8:65 0 128M 0 part sdc 8:32 0 477G 0 disk ├─sdc2 8:34 0 372G 0 part /home ├─sdc5 8:37 0 9.5G 0 part [SWAP] ├─sdc3 8:35 0 1K 0 part └─sdc1 8:33 0 95.4G 0 part / loop3 7:3 0 89.3M 1 loop /snap/core/6673
lsblk -b , --bytes ,輸出單位爲字節this
➜ ~ lsblk -b NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT loop1 7:1 0 58478592 1 loop /snap/kata-containers/288 sdd 8:48 0 2000398934016 0 disk └─sdd1 8:49 0 2000397795328 0 part sdb 8:16 0 128035676160 0 disk ├─sdb2 8:18 0 959447040 0 part └─sdb1 8:17 0 127071901696 0 part loop4 7:4 0 73129984 1 loop /snap/kata-containers/352 sr0 11:0 1 1073741312 0 rom loop2 7:2 0 93720576 1 loop /snap/core/6818 loop0 7:0 0 92733440 1 loop /snap/core/6964 sde 8:64 0 2000398934016 0 disk ├─sde2 8:66 0 2000263577600 0 part └─sde1 8:65 0 134217728 0 part sdc 8:32 0 512110190592 0 disk ├─sdc2 8:34 0 399469707264 0 part /home ├─sdc5 8:37 0 10239344640 0 part [SWAP] ├─sdc3 8:35 0 1024 0 part └─sdc1 8:33 0 102398689280 0 part / loop3 7:3 0 93581312 1 loop /snap/core/6673
lsblk -D , --discard, 打印遺棄功能列表, (沒詳細查)code
➜ ~ lsblk -D NAME DISC-ALN DISC-GRAN DISC-MAX DISC-ZERO loop1 0 4K 4G 0 sdd 0 4K 2G 0 └─sdd1 0 4K 2G 0 sdb 0 512B 2G 0 ├─sdb2 0 512B 2G 0 └─sdb1 0 512B 2G 0 loop4 0 4K 4G 0 sr0 0 0B 0B 0 loop2 0 4K 4G 0 loop0 0 4K 4G 0 sde 0 0B 0B 0 ├─sde2 0 0B 0B 0 └─sde1 0 0B 0B 0 sdc 0 512B 2G 0 ├─sdc2 0 512B 2G 0 ├─sdc5 0 512B 2G 0 ├─sdc3 0 512B 2G 0 └─sdc1 0 512B 2G 0 loop3 0 4K 4G 0
lsblk -d [/dev/sdx], --nodeps ,打印指定設備的信息,或者打印全部設備的信息orm
➜ ~ lsblk -d NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT loop1 7:1 0 55.8M 1 loop /snap/kata-containers/288 sdd 8:48 0 1.8T 0 disk sdb 8:16 0 119.2G 0 disk loop4 7:4 0 69.8M 1 loop /snap/kata-containers/352 sr0 11:0 1 1024M 0 rom loop2 7:2 0 89.4M 1 loop /snap/core/6818 loop0 7:0 0 88.4M 1 loop /snap/core/6964 sde 8:64 0 1.8T 0 disk sdc 8:32 0 477G 0 disk loop3 7:3 0 89.3M 1 loop /snap/core/6673 ➜ ~ lsblk -d /dev/sdc NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT sdc 8:32 0 477G 0 disk
lsblk -e, --exclude list , 排除major id列表
➜ ~ lsblk -e 7 NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT sdd 8:48 0 1.8T 0 disk └─sdd1 8:49 0 1.8T 0 part sdb 8:16 0 119.2G 0 disk ├─sdb2 8:18 0 915M 0 part └─sdb1 8:17 0 118.4G 0 part sr0 11:0 1 1024M 0 rom sde 8:64 0 1.8T 0 disk ├─sde2 8:66 0 1.8T 0 part └─sde1 8:65 0 128M 0 part sdc 8:32 0 477G 0 disk ├─sdc2 8:34 0 372G 0 part /home ├─sdc5 8:37 0 9.5G 0 part [SWAP] ├─sdc3 8:35 0 1K 0 part └─sdc1 8:33 0 95.4G 0 part / ➜ ~ lsblk -e 7,8 NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT sr0 11:0 1 1024M 0 rom
lsblk -f, --fs , 輸出設備的文件系統信息
同lsblk -o NAME,FSTYPE,LABEL,UUID,MOUNTPOINT
➜ ~ lsblk -f NAME FSTYPE LABEL UUID MOUNTPOINT loop1 squashfs /snap/kata-containers/288 sdd └─sdd1 ntfs Volume2 CA9015A6901599D1 sdb ├─sdb2 ntfs 30EAC3FEEAC3BE7A └─sdb1 ntfs OS_WIN10 0600EC5800EC4FEB loop4 squashfs /snap/kata-containers/352 sr0 loop2 squashfs /snap/core/6818 loop0 squashfs /snap/core/6964 sde ├─sde2 ntfs 專用存儲 B6D47A52D47A1539 └─sde1 sdc ├─sdc2 ext4 53842090-4ad6-4472-ad35-53b4d7b33bf8 /home ├─sdc5 swap 382e4b22-503e-4911-bf2f-1167af3f3cda [SWAP] ├─sdc3 └─sdc1 ext4 6b5618d0-a2b0-41f3-a3a5-9eb5a524b0a8 / loop3 squashfs /snap/core/6673
lsblk -I , --include list ,打印major id列表
➜ ~ lsblk -I 7,8 NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT loop1 7:1 0 55.8M 1 loop /snap/kata-containers/288 sdd 8:48 0 1.8T 0 disk └─sdd1 8:49 0 1.8T 0 part sdb 8:16 0 119.2G 0 disk ├─sdb2 8:18 0 915M 0 part └─sdb1 8:17 0 118.4G 0 part loop4 7:4 0 69.8M 1 loop /snap/kata-containers/352 loop2 7:2 0 89.4M 1 loop /snap/core/6818 loop0 7:0 0 88.4M 1 loop /snap/core/6964 sde 8:64 0 1.8T 0 disk ├─sde2 8:66 0 1.8T 0 part └─sde1 8:65 0 128M 0 part sdc 8:32 0 477G 0 disk ├─sdc2 8:34 0 372G 0 part /home ├─sdc5 8:37 0 9.5G 0 part [SWAP] ├─sdc3 8:35 0 1K 0 part └─sdc1 8:33 0 95.4G 0 part / loop3 7:3 0 89.3M 1 loop /snap/core/6673
lsblk -i , --ascii ,將輸出信息的字符用ascii碼打印
➜ ~ lsblk -i NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT loop1 7:1 0 55.8M 1 loop /snap/kata-containers/288 sdd 8:48 0 1.8T 0 disk `-sdd1 8:49 0 1.8T 0 part sdb 8:16 0 119.2G 0 disk |-sdb2 8:18 0 915M 0 part `-sdb1 8:17 0 118.4G 0 part loop4 7:4 0 69.8M 1 loop /snap/kata-containers/352 sr0 11:0 1 1024M 0 rom loop2 7:2 0 89.4M 1 loop /snap/core/6818 loop0 7:0 0 88.4M 1 loop /snap/core/6964 sde 8:64 0 1.8T 0 disk |-sde2 8:66 0 1.8T 0 part `-sde1 8:65 0 128M 0 part sdc 8:32 0 477G 0 disk |-sdc2 8:34 0 372G 0 part /home |-sdc5 8:37 0 9.5G 0 part [SWAP] |-sdc3 8:35 0 1K 0 part `-sdc1 8:33 0 95.4G 0 part / loop3 7:3 0 89.3M 1 loop /snap/core/6673
lsblk -J , --json 用json格式輸出
➜ ~ lsblk -J
{
"blockdevices": [
{"name": "loop1", "maj:min": "7:1", "rm": "0", "size": "55.8M", "ro": "1", "type": "loop", "mountpoint": "/snap/kata-containers/288"},
{"name": "sdd", "maj:min": "8:48", "rm": "0", "size": "1.8T", "ro": "0", "type": "disk", "mountpoint": null,
"children": [
{"name": "sdd1", "maj:min": "8:49", "rm": "0", "size": "1.8T", "ro": "0", "type": "part", "mountpoint": null}
]
},
{"name": "sdb", "maj:min": "8:16", "rm": "0", "size": "119.2G", "ro": "0", "type": "disk", "mountpoint": null,
"children": [
{"name": "sdb2", "maj:min": "8:18", "rm": "0", "size": "915M", "ro": "0", "type": "part", "mountpoint": null},
{"name": "sdb1", "maj:min": "8:17", "rm": "0", "size": "118.4G", "ro": "0", "type": "part", "mountpoint": null}
]
},
{"name": "loop4", "maj:min": "7:4", "rm": "0", "size": "69.8M", "ro": "1", "type": "loop", "mountpoint": "/snap/kata-containers/352"},
{"name": "sr0", "maj:min": "11:0", "rm": "1", "size": "1024M", "ro": "0", "type": "rom", "mountpoint": null},
{"name": "loop2", "maj:min": "7:2", "rm": "0", "size": "89.4M", "ro": "1", "type": "loop", "mountpoint": "/snap/core/6818"},
{"name": "loop0", "maj:min": "7:0", "rm": "0", "size": "88.4M", "ro": "1", "type": "loop", "mountpoint": "/snap/core/6964"},
{"name": "sde", "maj:min": "8:64", "rm": "0", "size": "1.8T", "ro": "0", "type": "disk", "mountpoint": null,
"children": [
{"name": "sde2", "maj:min": "8:66", "rm": "0", "size": "1.8T", "ro": "0", "type": "part", "mountpoint": null},
{"name": "sde1", "maj:min": "8:65", "rm": "0", "size": "128M", "ro": "0", "type": "part", "mountpoint": null}
]
},
{"name": "sdc", "maj:min": "8:32", "rm": "0", "size": "477G", "ro": "0", "type": "disk", "mountpoint": null,
"children": [
{"name": "sdc2", "maj:min": "8:34", "rm": "0", "size": "372G", "ro": "0", "type": "part", "mountpoint": "/home"},
{"name": "sdc5", "maj:min": "8:37", "rm": "0", "size": "9.5G", "ro": "0", "type": "part", "mountpoint": "[SWAP]"},
{"name": "sdc3", "maj:min": "8:35", "rm": "0", "size": "1K", "ro": "0", "type": "part", "mountpoint": null},
{"name": "sdc1", "maj:min": "8:33", "rm": "0", "size": "95.4G", "ro": "0", "type": "part", "mountpoint": "/"}
]
},
{"name": "loop3", "maj:min": "7:3", "rm": "0", "size": "89.3M", "ro": "1", "type": "loop", "mountpoint": "/snap/core/6673"}
]
}
lsblk -l, --list , 打印一個表格格式的輸出
➜ ~ lsblk -l NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT loop1 7:1 0 55.8M 1 loop /snap/kata-containers/288 sdd 8:48 0 1.8T 0 disk sdd1 8:49 0 1.8T 0 part sdb 8:16 0 119.2G 0 disk sdb2 8:18 0 915M 0 part sdb1 8:17 0 118.4G 0 part loop4 7:4 0 69.8M 1 loop /snap/kata-containers/352 sr0 11:0 1 1024M 0 rom loop2 7:2 0 89.4M 1 loop /snap/core/6818 loop0 7:0 0 88.4M 1 loop /snap/core/6964 sde 8:64 0 1.8T 0 disk sde2 8:66 0 1.8T 0 part sde1 8:65 0 128M 0 part sdc 8:32 0 477G 0 disk sdc2 8:34 0 372G 0 part /home sdc5 8:37 0 9.5G 0 part [SWAP] sdc3 8:35 0 1K 0 part sdc1 8:33 0 95.4G 0 part / loop3 7:3 0 89.3M 1 loop /snap/core/6673
lsblk -m, --perms , 輸出設備的權限,屬主屬組信息
同lsblk -o NAME,SIZE,OWNER,GROUP,MODE
➜ ~ lsblk -m NAME SIZE OWNER GROUP MODE loop1 55.8M root disk brw-rw---- sdd 1.8T root disk brw-rw---- └─sdd1 1.8T root disk brw-rw---- sdb 119.2G root disk brw-rw---- ├─sdb2 915M root disk brw-rw---- └─sdb1 118.4G root disk brw-rw---- loop4 69.8M root disk brw-rw---- sr0 1024M root cdrom brw-rw---- loop2 89.4M root disk brw-rw---- loop0 88.4M root disk brw-rw---- sde 1.8T root disk brw-rw---- ├─sde2 1.8T root disk brw-rw---- └─sde1 128M root disk brw-rw---- sdc 477G root disk brw-rw---- ├─sdc2 372G root disk brw-rw---- ├─sdc5 9.5G root disk brw-rw---- ├─sdc3 1K root disk brw-rw---- └─sdc1 95.4G root disk brw-rw---- loop3 89.3M root disk brw-rw----
lsblk -n, --noheadings, 不打印標題
➜ ~ lsblk -n loop1 7:1 0 55.8M 1 loop /snap/kata-containers/288 sdd 8:48 0 1.8T 0 disk └─sdd1 8:49 0 1.8T 0 part sdb 8:16 0 119.2G 0 disk ├─sdb2 8:18 0 915M 0 part └─sdb1 8:17 0 118.4G 0 part loop4 7:4 0 69.8M 1 loop /snap/kata-containers/352 sr0 11:0 1 1024M 0 rom loop2 7:2 0 89.4M 1 loop /snap/core/6818 loop0 7:0 0 88.4M 1 loop /snap/core/6964 sde 8:64 0 1.8T 0 disk ├─sde2 8:66 0 1.8T 0 part └─sde1 8:65 0 128M 0 part sdc 8:32 0 477G 0 disk ├─sdc2 8:34 0 372G 0 part /home ├─sdc5 8:37 0 9.5G 0 part [SWAP] ├─sdc3 8:35 0 1K 0 part └─sdc1 8:33 0 95.4G 0 part / loop3 7:3 0 89.3M 1 loop /snap/core/6673
lsblk -o , --output list, 打印指定字段細膩系,
或者lsblk -o +UUID, 表示在默認輸出的後邊加一列字段名爲UUID的信息
➜ ~ lsblk -o +UUID NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT UUID loop1 7:1 0 55.8M 1 loop /snap/kata-containers/288 sdd 8:48 0 1.8T 0 disk └─sdd1 8:49 0 1.8T 0 part CA9015A6901599D1 sdb 8:16 0 119.2G 0 disk ├─sdb2 8:18 0 915M 0 part 30EAC3FEEAC3BE7A └─sdb1 8:17 0 118.4G 0 part 0600EC5800EC4FEB loop4 7:4 0 69.8M 1 loop /snap/kata-containers/352 sr0 11:0 1 1024M 0 rom loop2 7:2 0 89.4M 1 loop /snap/core/6818 loop0 7:0 0 88.4M 1 loop /snap/core/6964 sde 8:64 0 1.8T 0 disk ├─sde2 8:66 0 1.8T 0 part B6D47A52D47A1539 └─sde1 8:65 0 128M 0 part sdc 8:32 0 477G 0 disk ├─sdc2 8:34 0 372G 0 part /home 53842090-4ad6-4472-ad35-53b4d7b33bf8 ├─sdc5 8:37 0 9.5G 0 part [SWAP] 382e4b22-503e-4911-bf2f-1167af3f3cda ├─sdc3 8:35 0 1K 0 part └─sdc1 8:33 0 95.4G 0 part / 6b5618d0-a2b0-41f3-a3a5-9eb5a524b0a8 loop3 7:3 0 89.3M 1 loop /snap/core/6673
lsblk -O, --output-all,輸出全部列的信息
➜ ~ lsblk -O
NAME KNAME MAJ:MIN FSTYPE MOUNTPOINT LABEL UUID PARTTYPE PARTLABEL PARTUUID PARTFLAGS RA RO RM HOTPLUG MODEL SERIAL SIZE STATE OWNER GROUP MODE ALIGNMENT MIN-IO OPT-IO PHY-SEC LOG-SEC ROTA SCHED RQ-SIZE TYPE DISC-ALN DISC-GRAN DISC-MAX DISC-ZERO WSAME WWN RAND PKNAME HCTL TRAN SUBSYSTEMS REV VENDOR
loop1 loop1 7:1 squashfs /snap/kata 128 1 0 0 55.8M root disk brw-rw---- 0 512 0 512 512 1 none 128 loop 0 4K 4G 0 0B 0 block
sdd sdd 8:48 128 0 0 0 ST2000DM0 WFL10Z4B 1.8T runni root disk brw-rw---- 0 4096 0 4096 512 1 cfq 128 disk 0 4K 2G 0 0B 0x5000c500be0e12fc 1 2:0:0:0 sata block:scsi:pci
│ 0001 ATA
└─sdd1 sdd1 8:49 ntfs Volume2 CA9015A6901599D1 ebd0a0a2-b9e5-4433-87c0-68b6b72699c7 Basic data partition
fbbcfa40-06d8-4d43-9b2e-18b04089e30d 128 0 0 0 1.8T root disk brw-rw---- 0 4096 0 4096 512 1 cfq 128 part 0 4K 2G 0 0B 0x5000c500be0e12fc 1 sdd block:scsi:pci
sdb sdb 8:16 128 0 0 0 M4-CT128M 000000001 119.2G runni root disk brw-rw---- 0 512 0 512 512 0 cfq 128 disk 0 512B 2G 0 0B 0x500a075109112598 0 0:0:0:0 sata block:scsi:pci
│ 000F ATA
├─sdb2 sdb2 8:18 ntfs 30EAC3FEEAC3BE7A 0x27 4051264b-02 128 0 0 0 915M root disk brw-rw---- 0 512 0 512 512 0 cfq 128 part 0 512B 2G 0 0B 0x500a075109112598 0 sdb block:scsi:pci
│
└─sdb1 sdb1 8:17 ntfs OS_WIN10 0600EC5800EC4FEB 0x7 4051264b-01 0x80 128 0 0 0 118.4G root disk brw-rw---- 0 512 0 512 512 0 cfq 128 part 0 512B 2G 0 0B 0x500a075109112598 0 sdb block:scsi:pci
loop4 loop4 7:4 squashfs /snap/kata 128 1 0 0 69.8M root disk brw-rw---- 0 512 0 512 512 1 none 128 loop 0 4K 4G 0 0B 0 block
sr0 sr0 11:0 128 0 1 1 DRW-24D3S KSTD3N812 1024M runni root cdrom brw-rw---- 0 512 0 512 512 1 cfq 128 rom 0 0B 0B 0 0B 0x5001480000000000 1 5:0:0:0 sata block:scsi:pci
1.01 ASUS
loop2 loop2 7:2 squashfs /snap/core 128 1 0 0 89.4M root disk brw-rw---- 0 512 0 512 512 1 none 128 loop 0 4K 4G 0 0B 0 block
loop0 loop0 7:0 squashfs /snap/core 128 1 0 0 88.4M root disk brw-rw---- 0 512 0 512 512 1 none 128 loop 0 4K 4G 0 0B 0 block
sde sde 8:64 128 0 0 0 WDC WD20E WD-WCC4ML 1.8T runni root disk brw-rw---- 0 4096 0 4096 512 1 cfq 128 disk 0 0B 0B 0 0B 0x50014ee2b52d7844 1 4:0:0:0 sata block:scsi:pci
│ 0A80 ATA
├─sde2 sde2 8:66 ntfs 專用存儲 B6D47A52D47A1539 ebd0a0a2-b9e5-4433-87c0-68b6b72699c7 Basic data partition
│ 42732d06-bb6d-4e0c-80fc-5e2746300ea7 128 0 0 0 1.8T root disk brw-rw---- 0 4096 0 4096 512 1 cfq 128 part 0 0B 0B 0 0B 0x50014ee2b52d7844 1 sde block:scsi:pci
│
└─sde1 sde1 8:65 e3c9e316-0b5c-4db8-817d-f92df00215ae Microsoft reserved partition
731fb900-205e-4c54-b9c7-b78946f2ac12 128 0 0 0 128M root disk brw-rw---- 3072 4096 0 4096 512 1 cfq 128 part 0 0B 0B 0 0B 0x50014ee2b52d7844 1 sde block:scsi:pci
sdc sdc 8:32 128 0 0 0 INTEL SSD BTLA82430 477G runni root disk brw-rw---- 0 512 0 512 512 0 cfq 128 disk 0 512B 2G 0 0B 0x55cd2e414f7acc09 0 1:0:0:0 sata block:scsi:pci
│ 002C ATA
├─sdc2 sdc2 8:34 ext4 /home 53842090-4ad6-4472-ad35-53b4d7b33bf8 0x83 2ab59d7a-02 128 0 0 0 372G root disk brw-rw---- 0 512 0 512 512 0 cfq 128 part 0 512B 2G 0 0B 0x55cd2e414f7acc09 0 sdc block:scsi:pci
│
├─sdc5 sdc5 8:37 swap [SWAP] 382e4b22-503e-4911-bf2f-1167af3f3cda 0x82 2ab59d7a-05 128 0 0 0 9.5G root disk brw-rw---- 0 512 0 512 512 0 cfq 128 part 0 512B 2G 0 0B 0x55cd2e414f7acc09 0 sdc block:scsi:pci
│
├─sdc3 sdc3 8:35 0x5 2ab59d7a-03 128 0 0 0 1K root disk brw-rw---- 0 512 0 512 512 0 cfq 128 part 0 512B 2G 0 0B 0x55cd2e414f7acc09 0 sdc block:scsi:pci
│
└─sdc1 sdc1 8:33 ext4 / 6b5618d0-a2b0-41f3-a3a5-9eb5a524b0a8 0x83 2ab59d7a-01 0x80 128 0 0 0 95.4G root disk brw-rw---- 0 512 0 512 512 0 cfq 128 part 0 512B 2G 0 0B 0x55cd2e414f7acc09 0 sdc block:scsi:pci
loop3 loop3 7:3 squashfs /snap/core 128 1 0 0 89.3M root disk brw-rw---- 0 512 0 512 512 1 none 128 loop 0 4K 4G 0 0B 0 block
lsblk -P, --pairs 打印成html須要的unsafe格式字符
➜ ~ lsblk -P NAME="loop1" MAJ:MIN="7:1" RM="0" SIZE="55.8M" RO="1" TYPE="loop" MOUNTPOINT="/snap/kata-containers/288" NAME="sdd" MAJ:MIN="8:48" RM="0" SIZE="1.8T" RO="0" TYPE="disk" MOUNTPOINT="" NAME="sdd1" MAJ:MIN="8:49" RM="0" SIZE="1.8T" RO="0" TYPE="part" MOUNTPOINT="" NAME="sdb" MAJ:MIN="8:16" RM="0" SIZE="119.2G" RO="0" TYPE="disk" MOUNTPOINT="" NAME="sdb2" MAJ:MIN="8:18" RM="0" SIZE="915M" RO="0" TYPE="part" MOUNTPOINT="" NAME="sdb1" MAJ:MIN="8:17" RM="0" SIZE="118.4G" RO="0" TYPE="part" MOUNTPOINT="" NAME="loop4" MAJ:MIN="7:4" RM="0" SIZE="69.8M" RO="1" TYPE="loop" MOUNTPOINT="/snap/kata-containers/352" NAME="sr0" MAJ:MIN="11:0" RM="1" SIZE="1024M" RO="0" TYPE="rom" MOUNTPOINT="" NAME="loop2" MAJ:MIN="7:2" RM="0" SIZE="89.4M" RO="1" TYPE="loop" MOUNTPOINT="/snap/core/6818" NAME="loop0" MAJ:MIN="7:0" RM="0" SIZE="88.4M" RO="1" TYPE="loop" MOUNTPOINT="/snap/core/6964" NAME="sde" MAJ:MIN="8:64" RM="0" SIZE="1.8T" RO="0" TYPE="disk" MOUNTPOINT="" NAME="sde2" MAJ:MIN="8:66" RM="0" SIZE="1.8T" RO="0" TYPE="part" MOUNTPOINT="" NAME="sde1" MAJ:MIN="8:65" RM="0" SIZE="128M" RO="0" TYPE="part" MOUNTPOINT="" NAME="sdc" MAJ:MIN="8:32" RM="0" SIZE="477G" RO="0" TYPE="disk" MOUNTPOINT="" NAME="sdc2" MAJ:MIN="8:34" RM="0" SIZE="372G" RO="0" TYPE="part" MOUNTPOINT="/home" NAME="sdc5" MAJ:MIN="8:37" RM="0" SIZE="9.5G" RO="0" TYPE="part" MOUNTPOINT="[SWAP]" NAME="sdc3" MAJ:MIN="8:35" RM="0" SIZE="1K" RO="0" TYPE="part" MOUNTPOINT="" NAME="sdc1" MAJ:MIN="8:33" RM="0" SIZE="95.4G" RO="0" TYPE="part" MOUNTPOINT="/" NAME="loop3" MAJ:MIN="7:3" RM="0" SIZE="89.3M" RO="1" TYPE="loop" MOUNTPOINT="/snap/core/6673"
lsblk -p, --paths, 打印設備的所有路徑
➜ ~ lsblk -p NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT /dev/loop1 7:1 0 55.8M 1 loop /snap/kata-containers/288 /dev/sdd 8:48 0 1.8T 0 disk └─/dev/sdd1 8:49 0 1.8T 0 part /dev/sdb 8:16 0 119.2G 0 disk ├─/dev/sdb2 8:18 0 915M 0 part └─/dev/sdb1 8:17 0 118.4G 0 part /dev/loop4 7:4 0 69.8M 1 loop /snap/kata-containers/352 /dev/sr0 11:0 1 1024M 0 rom /dev/loop2 7:2 0 89.4M 1 loop /snap/core/6818 /dev/loop0 7:0 0 88.4M 1 loop /snap/core/6964 /dev/sde 8:64 0 1.8T 0 disk ├─/dev/sde2 8:66 0 1.8T 0 part └─/dev/sde1 8:65 0 128M 0 part /dev/sdc 8:32 0 477G 0 disk ├─/dev/sdc2 8:34 0 372G 0 part /home ├─/dev/sdc5 8:37 0 9.5G 0 part [SWAP] ├─/dev/sdc3 8:35 0 1K 0 part └─/dev/sdc1 8:33 0 95.4G 0 part / /dev/loop3 7:3 0 89.3M 1 loop /snap/core/6673
lsblk -r, --raw , 裸格式輸出
➜ ~ lsblk -r NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT loop1 7:1 0 55.8M 1 loop /snap/kata-containers/288 sdd 8:48 0 1.8T 0 disk sdd1 8:49 0 1.8T 0 part sdb 8:16 0 119.2G 0 disk sdb2 8:18 0 915M 0 part sdb1 8:17 0 118.4G 0 part loop4 7:4 0 69.8M 1 loop /snap/kata-containers/352 sr0 11:0 1 1024M 0 rom loop2 7:2 0 89.4M 1 loop /snap/core/6818 loop0 7:0 0 88.4M 1 loop /snap/core/6964 sde 8:64 0 1.8T 0 disk sde2 8:66 0 1.8T 0 part sde1 8:65 0 128M 0 part sdc 8:32 0 477G 0 disk sdc2 8:34 0 372G 0 part /home sdc5 8:37 0 9.5G 0 part [SWAP] sdc3 8:35 0 1K 0 part sdc1 8:33 0 95.4G 0 part / loop3 7:3 0 89.3M 1 loop /snap/core/6673
lsblk -S, --scsi 輸出scsi設備(物理設備)的信息
➜ ~ lsblk -S NAME HCTL TYPE VENDOR MODEL REV TRAN sdd 2:0:0:0 disk ATA ST2000DM008-2FR1 0001 sata sdb 0:0:0:0 disk ATA M4-CT128M4SSD1 000F sata sr0 5:0:0:0 rom ASUS DRW-24D3ST 1.01 sata sde 4:0:0:0 disk ATA WDC WD20EZRX-00D 0A80 sata sdc 1:0:0:0 disk ATA INTEL SSDSC2KW51 002C sata
lsblk -s, --inverse , 打印分區的依賴設備反序列輸出,分區指向設備.
➜ ~ lsblk -s NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT loop1 7:1 0 55.8M 1 loop /snap/kata-containers/288 sdd1 8:49 0 1.8T 0 part └─sdd 8:48 0 1.8T 0 disk sdb2 8:18 0 915M 0 part └─sdb 8:16 0 119.2G 0 disk sdb1 8:17 0 118.4G 0 part └─sdb 8:16 0 119.2G 0 disk loop4 7:4 0 69.8M 1 loop /snap/kata-containers/352 sr0 11:0 1 1024M 0 rom loop2 7:2 0 89.4M 1 loop /snap/core/6818 loop0 7:0 0 88.4M 1 loop /snap/core/6964 sde2 8:66 0 1.8T 0 part └─sde 8:64 0 1.8T 0 disk sde1 8:65 0 128M 0 part └─sde 8:64 0 1.8T 0 disk sdc2 8:34 0 372G 0 part /home └─sdc 8:32 0 477G 0 disk sdc5 8:37 0 9.5G 0 part [SWAP] └─sdc 8:32 0 477G 0 disk sdc3 8:35 0 1K 0 part └─sdc 8:32 0 477G 0 disk sdc1 8:33 0 95.4G 0 part / └─sdc 8:32 0 477G 0 disk loop3 7:3 0 89.3M 1 loop /snap/core/6673
lsblk -t, --topology 打印塊設備的拓撲結構.
同 lsblk -o NAME,ALIGN-MENT,MIN-IO,OPT-IO,PHY-SEC,LOG-SEC,ROTA,SCHED,RQ-SIZE,RA,WSAME.
➜ ~ lsblk -t NAME ALIGNMENT MIN-IO OPT-IO PHY-SEC LOG-SEC ROTA SCHED RQ-SIZE RA WSAME loop1 0 512 0 512 512 1 none 128 128 0B sdd 0 4096 0 4096 512 1 cfq 128 128 0B └─sdd1 0 4096 0 4096 512 1 cfq 128 128 0B sdb 0 512 0 512 512 0 cfq 128 128 0B ├─sdb2 0 512 0 512 512 0 cfq 128 128 0B └─sdb1 0 512 0 512 512 0 cfq 128 128 0B loop4 0 512 0 512 512 1 none 128 128 0B sr0 0 512 0 512 512 1 cfq 128 128 0B loop2 0 512 0 512 512 1 none 128 128 0B loop0 0 512 0 512 512 1 none 128 128 0B sde 0 4096 0 4096 512 1 cfq 128 128 0B ├─sde2 0 4096 0 4096 512 1 cfq 128 128 0B └─sde1 3072 4096 0 4096 512 1 cfq 128 128 0B sdc 0 512 0 512 512 0 cfq 128 128 0B ├─sdc2 0 512 0 512 512 0 cfq 128 128 0B ├─sdc5 0 512 0 512 512 0 cfq 128 128 0B ├─sdc3 0 512 0 512 512 0 cfq 128 128 0B └─sdc1 0 512 0 512 512 0 cfq 128 128 0B loop3 0 512 0 512 512 1 none 128 128 0B
lsblk -V, --version 查看版本號
➜ ~ lsblk -V lsblk，來自 util-linux 2.27.1
lsblk -x, --sort colum, 指定字段對輸出信息排序
➜ ~ lsblk -S -x NAME NAME HCTL TYPE VENDOR MODEL REV TRAN sdb 0:0:0:0 disk ATA M4-CT128M4SSD1 000F sata sdc 1:0:0:0 disk ATA INTEL SSDSC2KW51 002C sata sdd 2:0:0:0 disk ATA ST2000DM008-2FR1 0001 sata sde 4:0:0:0 disk ATA WDC WD20EZRX-00D 0A80 sata sr0 5:0:0:0 rom ASUS DRW-24D3ST 1.01 sata
應用場景:
確認從磁盤上會否ssd
lsblk -d -o +rota
➜ ~ lsblk -d -o +rota NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT ROTA loop1 7:1 0 55.8M 1 loop /snap/kata-containers/288 1 sdd 8:48 0 1.8T 0 disk 1 sdb 8:16 0 119.2G 0 disk 0 loop4 7:4 0 69.8M 1 loop /snap/kata-containers/352 1 sr0 11:0 1 1024M 0 rom 1 loop2 7:2 0 89.4M 1 loop /snap/core/6818 1 loop0 7:0 0 88.4M 1 loop /snap/core/6964 1 sde 8:64 0 1.8T 0 disk 1 sdc 8:32 0 477G 0 disk 0 loop3 7:3 0 89.3M 1 loop /snap/core/6673 1
相關文章
- 1. lsblk命令詳解
- 2. 詳解Linux獲取啓動盤路徑命令--fdisk、sfdisk -l、lsblk
- 3. Linux下塊設備查看命令lsblk詳解
- 4. 命令詳解
- 5. 第14天 find命令詳解 tar命令詳解 tree命令 xargs命令
- 6. linux磁盤命令-lsblk顯現磁盤陣列分組
- 7. tcpdump命令詳解
- 8. xargs命令詳解
- 9. iostat命令詳解
- 10. strace命令詳解
- 更多相關文章...
- • 免費ARP詳解 - TCP/IP教程
- • Docker info 命令 - Docker命令大全
- • Docker 清理命令
- • Flink 數據傳輸及反壓詳解
相關標籤/搜索
每日一句
-
每一个你不满意的现在，都有一个你没有努力的曾经。
歡迎關注本站公眾號,獲取更多信息
相關文章