vwware虛擬機沒法鏈接外網

一、問題：動態IP時鏈接外網沒有問題，可是將IP改成靜態IP時發現沒有辦法鏈接外網

 

查看文件/etc/resolv.conf，裏面的內容所有都被註釋

[root@jenkins network-scripts]# more /etc/resolv.conf
# Generated by NetworkManager


# No nameservers found; try putting DNS servers into your
# ifcfg files in /etc/sysconfig/network-scripts like so:
#
# DNS1=xxx.xxx.xxx.xxx
# DNS2=xxx.xxx.xxx.xxx
# DOMAIN=lab.foo.com bar.foo.com

在eth0文件中增長一行語句
[root@jenkins network-scripts]# vi ifcfg-eth0 

DEVICE=eth0
BOOTPROTO=none
#BOOTPROTO=dhcp
IPADDR=192.168.0.173
IPV6INIT=no
NM_CONTROLLED=yes
ONBOOT=yes
TYPE=Ethernet
UUID="9086dd6f-6c00-49be-ad52-28ab87f2dcb7"
NAME="System eth0"
HWADDR=00:0c:29:c2:96:4a

NETMASK=255.255.255.0
GATEWAY=192.168.0.1
USERCTL=no
DNS1=192.168.0.1

重啓network
[root@jenkins network-scripts]# service network restart
Shutting down interface eth0:  Device state: 3 (disconnected)
                                                           [  OK  ]
Shutting down loopback interface:                          [  OK  ]
Bringing up loopback interface:                            [  OK  ]
Bringing up interface eth0:  Active connection state: activated
Active connection path: /org/freedesktop/NetworkManager/ActiveConnection/5
                                                           [  OK  ]

能夠鏈接外網
[root@jenkins network-scripts]# ping www.baidu.com
PING www.a.shifen.com (61.135.169.121) 56(84) bytes of data.
64 bytes from 61.135.169.121: icmp_seq=1 ttl=54 time=2.51 ms

再次查看/etc/resolv.conf文件
[root@jenkins network-scripts]# more /etc/resolv.conf
# Generated by NetworkManager
nameserver 192.168.0.1

 

二、問題

虛擬機關閉的狀態下進行了win10的更新，虛擬機打開以後處於沒網狀態，沒法鏈接到橋接模式

首先將虛擬機掛起或者關閉

點擊編輯-->虛擬網絡編輯器

 

還原默認設置

以後點擊VMnet0

橋接到本地網卡便可

打開虛擬機，設置爲橋接模式