netapp存儲設備更換硬盤

1、 狀態檢查
經過命令「disk show –v」檢查磁盤狀態以及磁盤屬於的機頭，當有磁盤故障時，磁盤狀態會顯示爲「FAILED」

此時經過「aggr status -s」可查看熱備盤數量是否減小，若是熱備盤比以前少了一塊則說明熱備盤已經開始頂替故障盤進行工做。

建議存儲磁盤故障後，不要當即進行更換，待熱備盤徹底頂替故障盤後再進行換盤操做，也能夠經過查看系統日誌來進行信息確認：

netapp-db-B>rdfile /etc/messages
netapp-db-B>rdfile /etc/messages.0
netapp-db-B>rdfile /etc/messages.1 、
netapp-db-B>rdfile /etc/messages.2
netapp-db-B>rdfile /etc/messages.3
netapp-db-B>rdfile /etc/messages.4
查看日誌會有相似以下提示：
ue Jan 1 03:51:44 CST [xxzx-netapp-db-B: raid.rg.recons.done:notice]: /aggr0/plex0/rg0: reconstruction completed for 2a.23 in 3:19:43.02
（重構結束時間）
當看到相似的日誌時候，便可以開始更換磁盤
2、 物理磁盤更換
Netapp物理機拔出黃燈報警硬盤，幾秒鐘後插入新盤，注意觀察有閃黃燈變爲綠燈過程
3、 系統配置

1. 狀態確認
   經過「disk show –v」查看磁盤歸屬狀況，可看到0a.00.18與0a.0019狀態爲「Not Owed」與「NONE」，說明此兩塊磁盤未歸屬任何機頭。
   
2. 系統配置
   若是機頭爲多個，則可根據實際需求，將不一樣的磁盤分配給不一樣的機頭進行管理，此時則須要用串口登錄磁盤所要分配的機頭按照下面的命令進行磁盤分配，（本例機頭只有一個，即全部的磁盤均受一個機頭管理，故無需考慮分配問題）
   1) 進入維護模式
   cdst-netapp> priv set advanced （維護模式）
   Warning: These advanced commands are potentially dangerous; use
   them only when directed to do so by NetApp
   personnel.
   cdst-netapp> （此時命令前帶）
   2) 磁盤分配
   cdst-netapp> disk assign 0a.00.19 （分配磁盤0a.00.19）
   Sat Jul 16 10:23:21 CST [cdst-netapp:diskown.changingOwner:info]: changing ownership for disk 0a.00.18 (S/N LXWH5A0M) from unowned (ID 4294967295) to cdst-netapp (ID 2014870888)
   cdst-netapp> Sat Jul 16 10:23:21 CST [cdst-netapp:raid.assim.disk.nolabels:error]: Disk 0a.00.18 Shelf 0 Bay 18 [NETAPP X412_HVIPC560A15 NA01] S/N [LXWH5A0M] has no valid labels. It will be taken out of service to prevent possible data loss.
   Sat Jul 16 10:23:21 CST [cdst-netapp:raid.config.disk.bad.label:error]: Disk 0a.00.18 Shelf 0 Bay 18 [NETAPP X412_HVIPC560A15 NA01] S/N [LXWH5A0M] has bad label.
   Sat Jul 16 10:23:21 CST [cdst-netapp:callhome.dsk.label:CRITICAL]: Call home for DISK BAD LABEL
   Sat Jul 16 10:23:21 CST [cdst-netapp:sfu.firmwareUpToDate:info]: Firmware is up-to-date on all disk shelves.
   可看到此時「oa.00.19」磁盤已經分配了機頭，而「oa.00.18」還未分配
   
   cdst-netapp> disk assign 0a.00.18
   Sat Jul 16 10:23:21 CST [cdst-netapp:diskown.changingOwner:info]: changing ownership for disk 0a.00.18 (S/N LXWH5A0M) from unowned (ID 4294967295) to cdst-netapp (ID 2014870888)
   cdst-netapp> Sat Jul 16 10:23:21 CST [cdst-netapp:raid.assim.disk.nolabels:error]: Disk 0a.00.18 Shelf 0 Bay 18 [NETAPP X412_HVIPC560A15 NA01] S/N [LXWH5A0M] has no valid labels. It will be taken out of service to prevent possible data loss.
   Sat Jul 16 10:23:21 CST [cdst-netapp:raid.config.disk.bad.label:error]: Disk 0a.00.18 Shelf 0 Bay 18 [NETAPP X412_HVIPC560A15 NA01] S/N [LXWH5A0M] has bad label.
   Sat Jul 16 10:23:21 CST [cdst-netapp:callhome.dsk.label:CRITICAL]: Call home for DISK BAD LABEL
   Sat Jul 16 10:23:21 CST [cdst-netapp:sfu.firmwareUpToDate:info]: Firmware is up-to-date on all disk shelves.
   
   3) 檢查磁盤標籤
   經過「sysconfig –r」查看各磁盤組的情況，其中可查看到熱備盤的情況：
   新更換的兩塊磁盤標籤爲「bad label」，需將此盤轉換爲熱備盤。
   
   4) 熱備盤轉換
   cdst-netapp> disk unfail -s 0a.00.18 （將0a.00.18磁盤轉換爲熱備盤）
   disk unfail: unfailing disk 0a.00.18...
   cdst-netapp> Sat Jul 16 10:37:56 CST [cdst-netapp:raid.disk.unfail.done:info]: Disk 0a.00.18 Shelf 0 Bay 18 [NETAPP X412_HVIPC560A15 NA01] S/N [LXWH5A0M] unfailed, and is now a spare
   Sat Jul 16 10:38:05 CST [cdst-netapp:raid.disk.offline:notice]: Marking Disk 0a.00.18 Shelf 0 Bay 18 [NETAPP X412_HVIPC560A15 NA01] S/N [LXWH5A0M] offline.
   Sat Jul 16 10:38:05 CST [cdst-netapp:bdfu.selected:info]: Disk 0a.00.18 [NETAPP X412_HVIPC560A15 NA01] S/N [LXWH5A0M] selected for background disk firmware update.
   Sat Jul 16 10:38:05 CST [cdst-netapp:dfu.firmwareDownloading:info]: Now downloading firmware file /etc/disk_fw/X412_HVIPC560A15.NA02.LOD on 1 disk(s) of plex [Pool0]...
   Sat Jul 16 10:38:21 CST [cdst-netapp:raid.disk.online:notice]: Onlining Disk 0a.00.18 Shelf 0 Bay 18 [NETAPP X412_HVIPC560A15 NA01] S/N [LXWH5A0M].
   Sat Jul 16 10:38:21 CST [cdst-netapp:sfu.firmwareUpToDate:info]: Firmware is up-to-date on all disk shelves.
   
   cdst-netapp> disk unfail -s 0a.00.19 （將0a.00.19磁盤轉換爲熱備盤）
   disk unfail: unfailing disk 0a.00.18...
   cdst-netapp> Sat Jul 16 10:37:56 CST [cdst-netapp:raid.disk.unfail.done:info]: Disk 0a.00.18 Shelf 0 Bay 18 [NETAPP X412_HVIPC560A15 NA01] S/N [LXWH5A0M] unfailed, and is now a spare
   Sat Jul 16 10:38:05 CST [cdst-netapp:raid.disk.offline:notice]: Marking Disk 0a.00.18 Shelf 0 Bay 18 [NETAPP X412_HVIPC560A15 NA01] S/N [LXWH5A0M] offline.
   Sat Jul 16 10:38:05 CST [cdst-netapp:bdfu.selected:info]: Disk 0a.00.18 [NETAPP X412_HVIPC560A15 NA01] S/N [LXWH5A0M] selected for background disk firmware update.
   Sat Jul 16 10:38:05 CST [cdst-netapp:dfu.firmwareDownloading:info]: Now downloading firmware file /etc/disk_fw/X412_HVIPC560A15.NA02.LOD on 1 disk(s) of plex [Pool0]...
   Sat Jul 16 10:38:21 CST [cdst-netapp:raid.disk.online:notice]: Onlining Disk 0a.00.18 Shelf 0 Bay 18 [NETAPP X412_HVIPC560A15 NA01] S/N [LXWH5A0M].
   Sat Jul 16 10:38:21 CST [cdst-netapp:sfu.firmwareUpToDate:info]: Firmware is up-to-date on all disk shelves.
   
   至此兩塊故障盤均轉換爲熱備盤，但此時狀態爲「not zeroed」，需進行磁盤零花操做
   5) 熱備盤零化
   輸入「disk zero spares」，此時沒有零花的熱備盤會開始零花操做，可經過「sysconfig –r」查看零花過程
   cdst-netapp*> disk zero spares