centos7.x網卡bond配置

本文摘抄自 https://www.cnblogs.com/liwanggui/p/6807212.html

centos7網卡bond配置

centos7網卡bond配置

1 備份網卡配置文件
2 使用nmcli命令配置bond
3 修改bond0網卡配置
4 重啓網絡，驗證配置結果
5 刪除 bond 設備
6 ifensalve 工具

實驗環境

[root@localhost ~]# cat /etc/redhat-release
CentOSLinux release 7.2.1511(Core)
[root@localhost ~]# uname -r
3.10.0-327.el7.x86_64

linux服務器 eno33554960 與 eno50332184 兩張網卡配置 bond 步驟（若是要配置多個bond0,1…按照這個流程重複操做便可）參考

查看網卡信息

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17

[root@localhost ~] # ip addr 1: lo:<LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN link /loopback  00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1 /8  scope host lo valid_lft forever preferred_lft forever inet6 ::1 /128  scope host valid_lft forever preferred_lft forever 2: eno16777736:<BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000 link /ether  00:0c:29:07:2c:86 brd ff:ff:ff:ff:ff:ff inet 192.168.92.11 /24  brd 192.168.92.255 scope global eno16777736 valid_lft forever preferred_lft forever inet6 fe80::20c:29ff:fe07:2c86 /64  scope link valid_lft forever preferred_lft forever 3: eno33554960:<BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000 link /ether  00:0c:29:07:2c:90 brd ff:ff:ff:ff:ff:ff 4: eno50332184:<BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000 link /ether  00:0c:29:07:2c:9a brd ff:ff:ff:ff:ff:ff

　　

1 備份網卡配置文件

1 2 3 4 5

[root@localhost ~] # cd /etc/sysconfig/network-scripts/ [root@localhost network-scripts] # mkdir /tmp/net_bak [root@localhost network-scripts] # cp ifcfg-*/tmp/net_bak/ [root@localhost network-scripts] # ls /tmp/net_bak/ ifcfg-eno16777736 ifcfg-eno33554960 ifcfg-eno50332184 ifcfg-eno67109408 ifcfg-eno83886632 ifcfg-lo

　　

2 使用nmcli命令配置bond

1 2 3 4 5 6 7 8

# 生成bond配置文件 [root@localhost network-scripts] # nmcli connection add type bond ifname bond0 mode 1 # 將網卡`eno33554960`與`eno50332184`綁定到bond0 [root@localhost network-scripts] # nmcli connection add type bond-slave ifname eno33554960 master bond0 [root@localhost network-scripts] # nmcli connection add type bond-slave ifname eno50332184 master bond0 # 查看生成的配置文件 [root@localhost network-scripts] # ls ifcfg-bond-* ifcfg-bond-bond0 ifcfg-bond-slave-eno33554960 ifcfg-bond-slave-eno50332184

 

bond的mode以下：

• balance-rr (0) –輪詢模式，負載均衡（bond默認的模式）
• active-backup (1) –主備模式（經常使用）
• balance-xor (2)
• broadcast (3）
• 802.3ad (4) –聚合模式
• balance-tlb (5)
• balance-alb (6)

3 修改bond0網卡配置

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22

[root@localhost network-scripts] # vim ifcfg-bond-bond0 DEVICE=bond0 BONDING_OPTS=mode=active-backup TYPE=Bond BONDING_MASTER= yes BOOTPROTO=static====>將 dhcp 改成static DEFROUTE= yes PEERDNS= yes PEERROUTES= yes IPV4_FAILURE_FATAL=no IPV6INIT= yes IPV6_AUTOCONF= yes IPV6_DEFROUTE= yes IPV6_PEERDNS= yes IPV6_PEERROUTES= yes IPV6_FAILURE_FATAL=no NAME=bond-bond0 UUID=af2d6662-608c-4f5d-8018-1984cc3d87ef ONBOOT= yes IPADDR=192.168.92.20 # 配置 IP 地址 PREFIX=24 # 配置掩碼 也能夠使用 NETMASK=255.255.255.0 GATEWAY=192.168.92.2 # 配置網關

　　

Tips: 若是不想修改bond網絡接口配置文件能夠在第2步的第一條命令後加上 ip4 "ip地址" gw4 "網關地址"

nmcli connection add type bond ifname bond0 mode 1 ip4 192.168.92.20/24 gw4 192.168.92.2

 

4 重啓網絡，驗證配置結果

1. 查看網卡信息

[root@localhost network-scripts]# ip addr show
1: lo:<LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: eno16777736:<BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000
link/ether 00:0c:29:07:2c:86 brd ff:ff:ff:ff:ff:ff
inet 192.168.92.11/24 brd 192.168.92.255 scope global eno16777736
valid_lft forever preferred_lft forever
inet6 fe80::20c:29ff:fe07:2c86/64 scope link
valid_lft forever preferred_lft forever
3: eno33554960:<BROADCAST,MULTICAST,SLAVE,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast master bond0 state UP qlen 1000
link/ether 00:0c:29:07:2c:90 brd ff:ff:ff:ff:ff:ff
4: eno50332184:<BROADCAST,MULTICAST,SLAVE,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast master bond0 state UP qlen 1000
link/ether 00:0c:29:07:2c:90 brd ff:ff:ff:ff:ff:ff
31: bond0:<BROADCAST,MULTICAST,MASTER,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP
link/ether 00:0c:29:07:2c:90 brd ff:ff:ff:ff:ff:ff
inet 192.168.92.20/24 brd 192.168.92.255 scope global bond0
valid_lft forever preferred_lft forever
inet6 fe80::20c:29ff:fe07:2c90/64 scope link
valid_lft forever preferred_lft forever

 

2. 查看bond信息

[root@localhost network-scripts]# cat /proc/net/bonding/bond0
EthernetChannelBondingDriver: v3.7.1(April27,2011)
BondingMode: fault-tolerance (active-backup)===> bond主備模式
PrimarySlave:None
CurrentlyActiveSlave: eno33554960 ===>當前激活的網卡eno33554960
MII Status: up
MII PollingInterval(ms):100
UpDelay(ms):0
DownDelay(ms):0
SlaveInterface: eno33554960 ===> bond0 組內的網卡
MII Status: up
Speed:1000Mbps
Duplex: full
LinkFailureCount:0
Permanent HW addr:00:0c:29:07:2c:90
Slave queue ID:0
SlaveInterface: eno50332184 ===> bond0 組內的網卡
MII Status: up
Speed:1000Mbps
Duplex: full
LinkFailureCount:0
Permanent HW addr:00:0c:29:07:2c:9a
Slave queue ID:0

 

5 刪除 bond 設備

當咱們須要刪除bond設備的時候,該如何刪除呢？請看下面操做

1.查看網絡設備

[root@localhost ~]# ls /sys/class/net/
bond0 bond1 bonding_masters eno16777736 eno33554960 eno50332184 eno67109408 eno83886632 lo

 

2.刪除bond網絡設備

直接刪除bond0，會提示無權限。 
能夠經過bonding_masters文件刪除bond設備,可是bonding_masters文件是沒法直接修改的。

[root@localhost ~]# echo -bond0 >/sys/class/net/bonding_masters

 echo 後面的 ‘-’ 是刪除設備，‘+’是增長設備