在安裝環境前看看是否設置了dns,網絡不通,安裝必然不成功php
安裝LAMP 環境:html
首先測試一下 yum install httpd 這個命令,若是可以正常安裝,把下面這幾個代碼跳過。若是不行,請執行如下代碼,更換一下軟件源(個人就不行。。各類悲劇。)mysql
首先備份/etc/yum.repos.d/CentOS-Base.reposql
mv /etc/yum.repos.d/CentOS-Base.repo /etc/yum.repos.d/CentOS-Base.repo.backupshell
下載對應版本repo文件, 放入/etc/yum.repos.d/(操做前請作好相應備份)apache
CentOS5vim
CentOS6瀏覽器
運行yum makecache生成緩存緩存
1、安裝Apache服務器
yum install httpd #根據提示,輸入Y安裝便可成功安裝
/etc/init.d/httpd start #啓動Apache
備註:Apache啓動以後會提示錯誤:
正在啓動 httpd:httpd: Could not reliably determine the server's fully qualif domain name, using ::1 for ServerName
解決辦法:
vi /etc/httpd/conf/httpd.conf #編輯
找到 #ServerName www.ksair.com.tw:80
修改成 ServerName localhost:80
:wq! #保存退出
chkconfig httpd on #設爲開機啓動
/etc/init.d/httpd restart #重啓Apache
2、安裝MySQL
一、安裝MySQL
yum install mysql mysql-server
詢問是否要安裝,輸入Y便可自動安裝,直到安裝完成
/etc/init.d/mysqld start #啓動MySQL
chkconfig mysqld on #設爲開機啓動
cp /usr/share/mysql/my-medium.cnf /etc/my.cnf #拷貝配置文件(注意:若是/etc目錄下面默認有一個my.cnf,直接覆蓋便可)
二、爲root帳戶設置密碼
mysql_secure_installation
回車,根據提示輸入Y
輸入2次密碼,回車
根據提示一路輸入Y
最後出現:Thanks for using MySQL!
MySql密碼設置完成,從新啓動 MySQL:
/etc/init.d/mysqld stop #中止
/etc/init.d/mysqld start #啓動
/etc/init.d/mysqld restart #重啓
3、安裝PHP5
一、安裝PHP5
yum install php
根據提示輸入Y直到安裝完成
二、安裝PHP組件,使 PHP5 支持 MySQL
yum install php-mysql php-gd libjpeg* php-imap php-ldap php-odbc php-pear php-xml php-xmlrpc php-mbstring php-mcrypt php-bcmath php-mhash libmcrypt php-curl
這裏選擇以上安裝包進行安裝
根據提示輸入Y回車
/etc/init.d/mysqld restart #重啓MySql
/etc/init.d/httpd restart #重啓Apche
三、安裝phpmyadmin
rpm –import http://dag.wieers.com/rpm/packages/RPM-GPG-KEY.dag.txtyum install http://pkgs.repoforge.org/rpmforge-release/rpmforge-release-0.5.2-2.el6.rf.i686.rpm(i386)
yum install phpmyadmin
vim /usr/share/phpmyadmin/config.inc.php
將裏面的$cfg['blowfish_secret'] = ' '; 單引號裏面隨便寫個數(空的會報錯「
配置文件如今須要絕密的短語密碼(blowfish_secret)
」$cfg['blowfish_secret'] = 'admin ';)
訪問下 localhost/phpmyadmin 如何 出現提示 「You don’t have permission to access /phpmyadmin/ on this server.」
改 /etc/httpd/conf.d/phpmyadmin.conf 裏面
將 Allow from 127.0.0.1 改爲 Allow from all。
這個時候在地址欄訪問phpmyadmin時仍是不能訪問
把phpmyadmin這個文件夾放到apache的工做目錄下,默認的apahce的工做目錄是在/var/www/html裏,這裏我改了修改了它的默認工做環境。
vi /etc/httpd/conf/httpd.conf
將裏面的DocumentRoot "/var/www/html"改成 DocumentRoot "/var/www"
因此個人phpmyadmin就直接複製到/var/www下
配置篇:(這個能夠先不用配置,我就沒有配置。)
1、Apache配置
vi /etc/httpd/conf/httpd.conf 編輯文件
ServerTokens OS 在44行 修改成:ServerTokens Prod (在出現錯誤頁的時候不顯示服務器操做系統的名稱)
ServerSignature On 在536行修改成:ServerSignature Off (在錯誤頁中不顯示Apache的版本)
Options Indexes FollowSymLinks 在331行 修改成:Options Includes ExecCGI FollowSymLinks(容許服務器執行CGI及SSI,禁止列出目錄)
#AddHandler cgi-script .cgi 在796行 修改成:AddHandler cgi-script .cgi .pl (容許擴展名爲.pl的CGI腳本運行)
AllowOverride None 在338行修改成:AllowOverride All (容許.htaccess)
AddDefaultCharset UTF-8 在759行 修改成:AddDefaultCharset GB2312 (添加GB2312爲默認編碼)
Options Indexes MultiViews FollowSymLinks 在554行 修改成 Options MultiViews FollowSymLinks(不在瀏覽器上顯示樹狀目錄結構)
DirectoryIndex index.html index.html.var 在402行 修改成:DirectoryIndex index.html index.htm Default.html Default.htm index.php Default.php index.html.var (設置默認首頁文件,增長index.php)
KeepAlive Off 在76行 修改成:KeepAlive On (容許程序性聯機)
MaxKeepAliveRequests 100 在83行 修改成:MaxKeepAliveRequests 1000 (增長同時鏈接數)
:wq! #保存退出
/etc/init.d/httpd restart 重啓
rm -f /etc/httpd/conf.d/welcome.conf /var/www/error/noindex.html #刪除默認測試頁
2、php配置
vi /etc/php.ini #編輯
date.timezone = PRC #在946行 把前面的分號去掉,改成date.timezone = PRC
disable_functions = passthru,exec,system,chroot,scandir,chgrp,chown,shell_exec,proc_open,proc_get_status,ini_alter,ini_alter,ini_restore,dl,openlog,syslog,readlink,symlink,popepassthru,stream_socket_server,escapeshellcmd,dll,popen,disk_free_space,checkdnsrr,checkdnsrr,getservbyname,getservbyport,disk_total_space,posix_ctermid,posix_get_last_error,posix_getcwd, posix_getegid,posix_geteuid,posix_getgid, posix_getgrgid,posix_getgrnam,posix_getgroups,posix_getlogin,posix_getpgid,posix_getpgrp,posix_getpid, posix_getppid,posix_getpwnam,posix_getpwuid, posix_getrlimit, posix_getsid,posix_getuid,posix_isatty, posix_kill,posix_mkfifo,posix_setegid,posix_seteuid,posix_setgid, posix_setpgid,posix_setsid,posix_setuid,posix_strerror,posix_times,posix_ttyname,posix_uname
#在386行列出PHP能夠禁用的函數,若是某些程序須要用到這個函數,能夠刪除,取消禁用。
expose_php = Off #在432行禁止顯示php版本的信息
magic_quotes_gpc = On #在745行 打開magic_quotes_gpc來防止SQL注入
open_basedir = .:/tmp/ #在380行設置表示容許訪問當前目錄(即PHP腳本文件所在之目錄)和/tmp/目錄,能夠防止php***跨站
:wq! #保存退出
/etc/init.d/mysqld restart #重啓MySql
/etc/init.d/httpd restart #重啓Apche
測試篇
cd /var/www/html
vi index.php #新建index.php文件
<?php
phpinfo();
?>
在地址欄運行localhost