Arduino 基於 ESP8266 配置WIFI模塊

時間 2020-07-23

標籤 arduino 基於 esp8266 esp 配置 wifi 模塊欄目無線简体版

原文原文鏈接

Arduino 基於 ESP8266 配置WIFI模塊

使用ESP8266做爲服務器，使用瀏覽器訪問該服務器，從而控制LED燈html

選擇【文件】->【示例】->【ESP8266WIFI】->【WiFiWebServer】
用Arduino新建一個文件，將剛打開的的WIFIWebServer的內容複製過去
修改 ssid 和 password 爲自家路由器的名稱以及密碼
將程序上傳到 ESP8266 開發板中
最後就能夠經過網站 [ip]/gpio/1 或 [ip]/gpio/0 控制燈開關

# http://192.168.0.57/gpio/1
# ip 地址在序列庫中能夠看到

附上代碼

/*
 *  This sketch demonstrates how to set up a simple HTTP-like server.
 *  The server will set a GPIO pin depending on the request
 *    http://server_ip/gpio/0 will set the GPIO2 low,
 *    http://server_ip/gpio/1 will set the GPIO2 high
 *  server_ip is the IP address of the ESP8266 module, will be 
 *  printed to Serial when the module is connected.
 */

#include <ESP8266WiFi.h>

const char* ssid = "YUCHANJIUYE";
const char* password = "19283746";

// Create an instance of the server
// specify the port to listen on as an argument
WiFiServer server(80);

void setup() {
  Serial.begin(115200);
  delay(10);

  // prepare GPIO2
  pinMode(LED_BUILTIN, OUTPUT);
  digitalWrite(LED_BUILTIN, 0);
  
  // Connect to WiFi network
  Serial.println();
  Serial.println();
  Serial.print("Connecting to ");
  Serial.println(ssid);
  
  WiFi.begin(ssid, password);
  
  while (WiFi.status() != WL_CONNECTED) {
    delay(500);
    Serial.print(".");
  }
  Serial.println("");
  Serial.println("WiFi connected");
  
  // Start the server
  server.begin();
  Serial.println("Server started");

  // Print the IP address
  Serial.println(WiFi.localIP());
}

void loop() {
  // Check if a client has connected
  WiFiClient client = server.available();
  if (!client) {
    return;
  }
  
  // Wait until the client sends some data
  Serial.println("new client");
  while(!client.available()){
    delay(1);
  }
  
  // Read the first line of the request
  String req = client.readStringUntil('\r');
  Serial.println(req);
  client.flush();
  
  // Match the request
  int val;
  if (req.indexOf("/gpio/0") != -1)
    val = 0;
  else if (req.indexOf("/gpio/1") != -1)
    val = 1;
  else {
    Serial.println("invalid request");
    client.stop();
    return;
  }

  // Set GPIO2 according to the request
  digitalWrite(LED_BUILTIN, val);
  
  client.flush();

  // Prepare the response
  String s = "HTTP/1.1 200 OK\r\nContent-Type: text/html\r\n\r\n<!DOCTYPE HTML>\r\n<html>\r\nGPIO is now ";
  s += (val)?"high":"low";
  s += "</html>\n";

  // Send the response to the client
  client.print(s);
  delay(1);
  Serial.println("Client disonnected");

  // The client will actually be disconnected 
  // when the function returns and 'client' object is detroyed
}

相關標籤/搜索

每日一句

每一个你不满意的现在，都有一个你没有努力的曾经。