keepalived+mysql實現雙主高可用
環境：mysql
DB1：centos6.八、mysql5.五、192.168.2.204 hostname：bogonsql
DB2：centos6.八、mysql5.五、192.168.2.205 hostname：localhost.localdomain數據庫
vip：192.168.2.33vim
1、先配置DB1和DB2的雙主熱備centos
一、分別在DB1和DB2上安裝mysql，我這裏是用的ansible自動部署bash
[root@www ansible]# ansible-playbook lnmp.yml PLAY [new] ********************************************************************* TASK [setup] ******************************************************************* ok: [192.168.2.205] ok: [192.168.2.204] TASK [mysql : Create backup folder] ******************************************** ok: [192.168.2.204] ok: [192.168.2.205] TASK [mysql : create log folder] *********************************************** changed: [192.168.2.204] changed: [192.168.2.205] TASK [mysql : copy mysql_tar_gz to client] ************************************* changed: [192.168.2.204] changed: [192.168.2.205] TASK [mysql : copy install_script to client] *********************************** changed: [192.168.2.204] changed: [192.168.2.205] TASK [mysql : copy my.cnf to /data/backup] ************************************* changed: [192.168.2.204] changed: [192.168.2.205] TASK [mysql : install mysql] *************************************************** changed: [192.168.2.204] changed: [192.168.2.205] PLAY RECAP ********************************************************************* 192.168.2.204 : ok=7 changed=5 unreachable=0 failed=0 192.168.2.205 : ok=7 changed=5 unreachable=0 failed=0
二、修改mysql的配置文件服務器
首先修改DB1主機的配置文件，在/etc/my.cnf文件中的[mysqld]段添加如下內容dom
[root@bogon ~]# vim /etc/my.cnf server-id = 1 #節點標示，主從節點不能相同，必須全局惟一 log-bin=mysql-bin #開啓mysql的binlog日誌功能 relay-log = mysql-relay-bin #開啓relay-log日誌，relay-log日誌記錄的是從服務器I/O線程將主服務器的二進制日誌讀取過來記錄到從服務器本地文件，而後SQL線程會讀取relay-log日誌的內容並應用到從服務器 replicate-wild-ignore-table=mysql.% #複製過濾選項 replicate-wild-ignore-table=test.% replicate-wild-ignore-table=information_schema.%
而後修改DB2主機的配置文件，ide
[root@localhost ~]# vim /etc/my.cnf server-id = 2 log-bin=mysql-bin relay-log = mysql-relay-bin replicate-wild-ignore-table=mysql.% replicate-wild-ignore-table=test.% replicate-wild-ignore-table=information_schema.%
最後分別重啓DB1和DB2使配置生效oop
三、建立複製用戶並受權
注：在執行主主互備以前要保證兩臺server上數據一致
首先在DB1的mysql庫中建立複製用戶
mysql> grant replication slave on *.* to 'repl_user'@'192.168.2.205' identified by 'repl_passwd'; Query OK, 0 rows affected (0.04 sec) mysql> show master status; +------------------+----------+--------------+------------------+ | File | Position | Binlog_Do_DB | Binlog_Ignore_DB | +------------------+----------+--------------+------------------+ | mysql-bin.000004 | 271 | | | +------------------+----------+--------------+------------------+ 1 row in set (0.00 sec)
而後在DB2的mysql庫中將DB1設爲本身的主服務器
mysql> change master to \ -> master_host='192.168.2.204', -> master_user='repl_user', -> master_password='repl_passwd', -> master_log_file='mysql-bin.000004', -> master_log_pos=271; Query OK, 0 rows affected (0.07 sec)
這裏須要注意master_log_file和master_log_pos兩個選項，這兩個選項的值是在DB1上經過「show master status」 查詢到的結果
接着在DB2上啓動slave服務
mysql> start slave; Query OK, 0 rows affected (0.01 sec)
下面查看DB2上slave的運行狀態，
mysql> show slave status\G *************************** 1. row *************************** Slave_IO_State: Waiting for master to send event Master_Host: 192.168.2.204 Master_User: repl_user Master_Port: 3306 Connect_Retry: 60 Master_Log_File: mysql-bin.000005 Read_Master_Log_Pos: 271 Relay_Log_File: mysql-relay-bin.000002 Relay_Log_Pos: 253 Relay_Master_Log_File: mysql-bin.000005 Slave_IO_Running: Yes #重點 Slave_SQL_Running: Yes #重點 Replicate_Do_DB: Replicate_Ignore_DB: Replicate_Do_Table: Replicate_Ignore_Table: Replicate_Wild_Do_Table: Replicate_Wild_Ignore_Table: mysql.%,test.%,information_schema.% #跳過的表 Last_Errno: 0 Last_Error: Skip_Counter: 0 Exec_Master_Log_Pos: 271 Relay_Log_Space: 409 Until_Condition: None Until_Log_File: Until_Log_Pos: 0 Master_SSL_Allowed: No Master_SSL_CA_File: Master_SSL_CA_Path: Master_SSL_Cert: Master_SSL_Cipher: Master_SSL_Key: Seconds_Behind_Master: 0 Master_SSL_Verify_Server_Cert: No Last_IO_Errno: 0 Last_IO_Error: Last_SQL_Errno: 0 Last_SQL_Error: Replicate_Ignore_Server_Ids: Master_Server_Id: 1 1 row in set (0.00 sec)
到這裏，從DB1到DB2的mysql主從複製已經完成。接下來開始配置從DB2到DB1的mysql主從複製
在DB2的mysql庫中建立複製用戶
mysql> grant replication slave on *.* to 'repl_user'@'192.168.2.204' identified by 'repl_passwd'; Query OK, 0 rows affected (0.00 sec) mysql> show master status; +------------------+----------+--------------+------------------+ | File | Position | Binlog_Do_DB | Binlog_Ignore_DB | +------------------+----------+--------------+------------------+ | mysql-bin.000005 | 271 | | | +------------------+----------+--------------+------------------+ 1 row in set (0.00 sec)
而後在DB1的mysql庫中將DB2設爲本身的主服務器
mysql> change master to \ -> master_host='192.168.2.205', -> master_user='repl_user', -> master_password='repl_passwd', -> master_log_file='mysql-bin.000005', -> master_log_pos=271; Query OK, 0 rows affected (0.07 sec)
最後，在DB1上啓動slave服務
mysql> start slave; Query OK, 0 rows affected (0.01 sec)
查看DB1上slave的運行狀態
mysql> show slave status\G *************************** 1. row *************************** Slave_IO_State: Waiting for master to send event Master_Host: 192.168.2.205 Master_User: repl_user Master_Port: 3306 Connect_Retry: 60 Master_Log_File: mysql-bin.000005 Read_Master_Log_Pos: 271 Relay_Log_File: mysql-relay-bin.000002 Relay_Log_Pos: 253 Relay_Master_Log_File: mysql-bin.000005 Slave_IO_Running: Yes Slave_SQL_Running: Yes Replicate_Do_DB: Replicate_Ignore_DB: Replicate_Do_Table: Replicate_Ignore_Table: Replicate_Wild_Do_Table: Replicate_Wild_Ignore_Table: mysql.%,test.%,information_schema.% Last_Errno: 0 Last_Error: Skip_Counter: 0 Exec_Master_Log_Pos: 271 Relay_Log_Space: 409 Until_Condition: None Until_Log_File: Until_Log_Pos: 0 Master_SSL_Allowed: No Master_SSL_CA_File: Master_SSL_CA_Path: Master_SSL_Cert: Master_SSL_Cipher: Master_SSL_Key: Seconds_Behind_Master: 0 Master_SSL_Verify_Server_Cert: No Last_IO_Errno: 0 Last_IO_Error: Last_SQL_Errno: 0 Last_SQL_Error: Replicate_Ignore_Server_Ids: Master_Server_Id: 2 1 row in set (0.00 sec)
2、配置keepalived實現mysql雙主高可用
一、安裝keepalived
[root@bogon src]# tar zxf keepalived-1.2.24.tar.gz [root@bogon src]# cd keepalived-1.2.24 [root@bogon keepalived-1.2.24]# ./configure --sysconf=/etc --with-kernel-dir=/lib/modules/2.6.32-642.3.1.el6.x86_64/ [root@bogon keepalived-1.2.24]# make && make install [root@bogon keepalived-1.2.24]# ln -s /usr/local/sbin/keepalived /sbin/ [root@bogon keepalived-1.2.24]# chkconfig --add keepalived [root@bogon keepalived-1.2.24]# chkconfig --level 35 keepalived on
[root@bogon keepalived-1.2.24]# yum -y install ipvsadm ####以前沒安裝ipvsadm，致使 keepalived配置中lvs配置部分不生效，其中定義的notify_down 字段死活不生效，查了很久在發現是沒安裝ipvsadm致使的，淚奔！！！
[root@bogon keepalived-1.2.24]# ipvsadm
二、配置keepalived
DB1上keepalived.conf配置爲
[root@bogon keepalived-1.2.24]# cat /etc/keepalived/keepalived.conf ! Configuration File for keepalived global_defs { notification_email { acassen@firewall.loc failover@firewall.loc sysadmin@firewall.loc } notification_email_from Alexandre.Cassen@firewall.loc smtp_server 192.168.200.1 smtp_connect_timeout 30 router_id LVS_DEVEL vrrp_skip_check_adv_addr vrrp_strict vrrp_garp_interval 0 vrrp_gna_interval 0 } vrrp_instance HA_1 { state BACKUP #在DB1和DB2上均配置爲BACKUP interface eth1 virtual_router_id 90 priority 100 advert_int 1 nopreempt #不搶佔模式，只有優先級高的機器上設置便可，優先級低的機器可不設置 authentication { auth_type PASS auth_pass 1111 } virtual_ipaddress { 192.168.2.33 } } virtual_server 192.168.2.33 3306 { delay_loop 2 lb_algo wrr lb_kind DR persistence_timeout 60 #會話保持時間 protocol TCP real_server 192.168.2.204 3306 { weight 3 notify_down /root/shutdown.sh #檢測到服務down後執行的腳本 TCP_CHECK { connect_timeout 10 #鏈接超時時間 nb_get_retry 3 #重連次數 delay_before_retry 3 #重連間隔時間 connect_port 3306 #健康檢查端口 } } }
DB2上keepalived.conf配置爲
[root@localhost keepalived-1.2.24]# cat /etc/keepalived/keepalived.conf ! Configuration File for keepalived global_defs { notification_email { acassen@firewall.loc failover@firewall.loc sysadmin@firewall.loc } notification_email_from Alexandre.Cassen@firewall.loc smtp_server 192.168.200.1 smtp_connect_timeout 30 router_id LVS_DEVEL vrrp_skip_check_adv_addr vrrp_strict vrrp_garp_interval 0 vrrp_gna_interval 0 } vrrp_instance HA_1 { state BACKUP interface eth1 virtual_router_id 90 priority 90 advert_int 1 authentication { auth_type PASS auth_pass 1111 } virtual_ipaddress { 192.168.2.33 } } virtual_server 192.168.2.33 3306 { delay_loop 2 lb_algo wrr lb_kind DR persistence_timeout 60 protocol TCP real_server 192.168.2.205 3306 { weight 3 notify_down /root/shutdown.sh TCP_CHECK { connect_timeout 10 nb_get_retry 3 delay_before_retry 3 connect_port 3306 } } }
編寫檢測服務down後所要執行的腳本shutdown.sh
[root@bogon ~]# cat /root/shtdown.sh #!/bin/bash killall keepalived
注：此腳本是上面配置文件notify_down選項所用到的，keepalived使用notify_down選項來檢查real_server的服務狀態，當發現real_server服務故障時，便觸發此腳本；咱們能夠看到，腳本就一個命令，經過killall keepalived強制殺死keepalived進程，從而實現了MySQL故障自動轉移。另外，咱們不用擔憂兩個MySQL會同時提供數據更新操做，由於每臺MySQL上的keepalived的配置裏面只有本機MySQL的IP+VIP，而不是兩臺MySQL的IP+VIP
啓動keepalived並查看日誌
[root@bogon keepalived-1.2.24]# chmod 755 /etc/init.d/keepalived [root@bogon keepalived-1.2.24]# service keepalived start 正在啓動 keepalived： [肯定] [root@bogon keepalived-1.2.24]# tail -f /var/log/messages Oct 24 22:37:35 bogon Keepalived_vrrp[20835]: Sending gratuitous ARP on eth1 for 192.168.2.33 Oct 24 22:37:35 bogon Keepalived_vrrp[20835]: Sending gratuitous ARP on eth1 for 192.168.2.33 Oct 24 22:37:35 bogon Keepalived_vrrp[20835]: Sending gratuitous ARP on eth1 for 192.168.2.33 Oct 24 22:37:35 bogon Keepalived_vrrp[20835]: Sending gratuitous ARP on eth1 for 192.168.2.33 Oct 24 22:37:40 bogon Keepalived_vrrp[20835]: Sending gratuitous ARP on eth1 for 192.168.2.33 Oct 24 22:37:40 bogon Keepalived_vrrp[20835]: VRRP_Instance(HA_1) Sending/queueing gratuitous ARPs on eth1 for 192.168.2.33 Oct 24 22:37:40 bogon Keepalived_vrrp[20835]: Sending gratuitous ARP on eth1 for 192.168.2.33 Oct 24 22:37:40 bogon Keepalived_vrrp[20835]: Sending gratuitous ARP on eth1 for 192.168.2.33 Oct 24 22:37:40 bogon Keepalived_vrrp[20835]: Sending gratuitous ARP on eth1 for 192.168.2.33 Oct 24 22:37:40 bogon Keepalived_vrrp[20835]: Sending gratuitous ARP on eth1 for 192.168.2.33
3、測試功能
一、在遠程客戶端經過vip登錄測試
[root@www ansible]# mysql -h 192.168.2.33 -uroot -p Enter password: Welcome to the MySQL monitor. Commands end with ; or \g. Your MySQL connection id is 2372 Server version: 5.5.37-log Source distribution Copyright (c) 2000, 2013, Oracle and/or its affiliates. All rights reserved. Oracle is a registered trademark of Oracle Corporation and/or its affiliates. Other names may be trademarks of their respective owners. Type 'help;' or '\h' for help. Type '\c' to clear the current input statement. mysql>
mysql> show variables like "%hostname%"
-> ;
+---------------+-------+
| Variable_name | Value |
+---------------+-------+
| hostname | bogon |
+---------------+-------+
1 row in set (0.00 sec)
從sql輸出結果看，能夠經過vip登錄，而且登錄了DB1服務器
二、建立一個數據庫，而後在這個庫重建立一個表，並插入數據
mysql> create database repldb; Query OK, 1 row affected (0.02 sec) mysql> show databases; +--------------------+ | Database | +--------------------+ | information_schema | | mysql | | performance_schema | | repldb | | test | +--------------------+ 5 rows in set (0.06 sec) mysql> use repldb; Database changed mysql> create table repl_table(id int,email varchar(80),password varchar(40) not null); Query OK, 0 rows affected (0.03 sec) mysql> show tables; +------------------+ | Tables_in_repldb | +------------------+ | repl_table | +------------------+ 1 row in set (0.01 sec) mysql> insert into repl_table(id,email,password) values(1,"master@163.com","qweasd"); Query OK, 1 row affected (0.00 sec)
登錄DB2主機的mysql，可數據是否複製成功
mysql> show variables like "%hostname%"; +---------------+-----------------------+ | Variable_name | Value | +---------------+-----------------------+ | hostname | localhost.localdomain | +---------------+-----------------------+ 1 row in set (0.01 sec) mysql> show databases; +--------------------+ | Database | +--------------------+ | information_schema | | mysql | | performance_schema | | repldb | | test | +--------------------+ 5 rows in set (0.05 sec) mysql> use repldb; Database changed mysql> show tables; +------------------+ | Tables_in_repldb | +------------------+ | repl_table | +------------------+ 1 row in set (0.00 sec) mysql> select * from repl_table; +------+----------------+----------+ | id | email | password | +------+----------------+----------+ | 1 | master@163.com | qweasd | +------+----------------+----------+ 1 row in set (0.08 sec)
三、中止DB1主機上的mysql，查看故障是否自動轉移
[root@bogon ~]# service mysqld stop
Shutting down MySQL.. SUCCESS!
登錄192.168.2.33查看：
mysql> show variables like "%hostname%"; ERROR 2006 (HY000): MySQL server has gone away No connection. Trying to reconnect... Connection id: 610 Current database: repldb +---------------+-----------------------+ | Variable_name | Value | +---------------+-----------------------+ | hostname | localhost.localdomain | +---------------+-----------------------+ 1 row in set (0.01 sec)
能夠看到如今登錄的是DB2 故障自動切換成功
接着，插入數據看DB1是否能複製
mysql> insert into repl_table(id,email,password) values(2,"slave@163.com","qweasd"); Query OK, 1 row affected (0.06 sec) mysql> use repldb; Database changed mysql> select * from repl_table; +------+----------------+----------+ | id | email | password | +------+----------------+----------+ | 1 | master@163.com | qweasd | | 2 | slave@163.com | qweasd | +------+----------------+----------+ 2 rows in set (0.00 sec)
登錄DB1查看錶數據
[root@bogon ~]# service mysqld start Starting MySQL. SUCCESS! [root@bogon ~]# mysql -uroot -p Enter password: Welcome to the MySQL monitor. Commands end with ; or \g. Your MySQL connection id is 4 Server version: 5.5.37-log Source distribution Copyright (c) 2000, 2014, Oracle and/or its affiliates. All rights reserved. Oracle is a registered trademark of Oracle Corporation and/or its affiliates. Other names may be trademarks of their respective owners. Type 'help;' or '\h' for help. Type '\c' to clear the current input statement. mysql> use repldb; Database changed mysql> select * from repl_table; +------+----------------+----------+ | id | email | password | +------+----------------+----------+ | 1 | master@163.com | qweasd | | 2 | slave@163.com | qweasd | +------+----------------+----------+ 2 rows in set (0.02 sec)
複製成功！
到此所有完成！！！
相關文章
- 1. keepalived+MySQL雙主實現高可用性
- 2. Keepalived實現雙主模型的ipvs高可用集羣+實現雙主模型的nginx高可用集羣
- 3. MySQL雙主+keepalived高可用
- 4. heartbeat雙主高可用
- 5. MySQL-雙主高可用
- 6. MySQL 高可用——雙主
- 7. mysql + keepalived 雙主高可用
- 8. keepalived實現LVS的高可用以及實現web服務的高可用（主從模型、雙主模型）
- 9. 使用Keepalived實現MySQL雙主高可用
- 10. openldap mirrorMode主主實現高可用性
- 更多相關文章...
- • 現實生活中的 XML - XML 教程
- • Hibernate實現增刪改查 - Hibernate教程
- • ☆基於Java Instrument的Agent實現
- • Git可視化極簡易教程 — Git GUI使用方法
相關標籤/搜索
每日一句
-
每一个你不满意的现在，都有一个你没有努力的曾经。
最新文章
- 1. No provider available from registry 127.0.0.1:2181 for service com.ddbuy.ser 解決方法
- 2. Qt5.7以上調用虛擬鍵盤(支持中文)，以及源碼修改(可拖動，水平縮放)
- 3. 軟件測試面試- 購物車功能測試用例設計
- 4. ElasticSearch（概念篇）：你知道的, 爲了搜索…
- 5. redux理解
- 6. gitee創建第一個項目
- 7. 支持向量機之硬間隔（一步步推導，通俗易懂）
- 8. Mysql 異步複製延遲的原因及解決方案
- 9. 如何在運行SEPM配置嚮導時將不可認的複雜數據庫密碼改爲簡單密碼
- 10. windows系統下tftp服務器使用
歡迎關注本站公眾號,獲取更多信息
相關文章