從VirtualBox裏克隆出來的CentOS Linux。linux
ifconfig...沒有看到eth0.。而後重啓網卡又報下面錯誤。網絡
故障現象:oop
service network restart
Shutting down loopback insterface: [ OK ]
Bringing up loopback insterface: [ OK ]
Bringing up interface eth0: Device eth0 does not seem to be present,delaying initialization. [FAILED]rest
解決辦法:ip
首先,打開/etc/udev/rules.d/70-persistent-net.rules內容以下面例子所示:get
# vi /etc/udev/rules.d/70-persistent-net.rules
# This file was automatically generated by the /lib/udev/write_net_rules
# program, run by the persistent-net-generator.rules rules file.
#
# You can modify it, as long as you keep each rule on a single
# line, and change only the value of the NAME= key.
# PCI device 0x1022:0x2000 (pcnet32)
SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="00:0c:29:8f:89:9
7", ATTR{type}=="1", KERNEL=="eth*", NAME="eth0"
# PCI device 0x1022:0x2000 (pcnet32)
SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="00:0c:29:50:bd:1
7", ATTR{type}=="1", KERNEL=="eth*", NAME="eth1"generator
記錄下,eth1網卡的mac地址00:0c:29:50:bd:17it
接下來,打開/etc/sysconfig/network-scripts/ifcfg-eth0io
# vi /etc/sysconfig/network-scripts/ifcfg-eth0file
將 DEVICE="eth0" 改爲 DEVICE="eth1" ,
將 HWADDR="00:0c:29:8f:89:97" 改爲上面的mac地址 HWADDR="00:0c:29:50:bd:17"
最後,重啓網絡
# service network restart
或者
# /etc/init.d/network restart
正常了。