Centos7添加磁盤並分區格式化

1.安裝前準備

[root@localhost ~]# yum install xfsprogs
[root@localhost ~]# modprobe xfs
[root@localhost ~]# lsmod |grep xfs
xfs                   915019  3 
libcrc32c              12644  1 xfs

2.添加硬盤

添加硬盤後重啓服務器，會發現已經有新的磁盤掛載

[root@localhost /]# fdisk -l
WARNING: fdisk GPT support is currently new, and therefore in an experimental phase. Use at your own discretion.

Disk /dev/sdb: 644.2 GB, 644245094400 bytes, 1258291200 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk label type: gpt


#         Start          End    Size  Type            Name
 1         2048   1258289151    600G  Microsoft basic xfs
。。。省略。。。。

3.分區格式化

[root@localhost ~]# parted /dev/sdb
GNU Parted 3.1
Using /dev/sdb
Welcome to GNU Parted! Type 'help' to view a list of commands.
(parted) mklabel gpt                                                      
(parted) mkpart xfs 0% 100%                                               
(parted) print                                                            
Model: VMware Virtual disk (scsi)
Disk /dev/sdb: 644GB
Sector size (logical/physical): 512B/512B
Partition Table: gpt
Disk Flags: 

Number  Start   End    Size   File system  Name  Flags
 1      1049kB  644GB  644GB               xfs

#輸入quit退出parted
(parted) quit                                                             
Information: You may need to update /etc/fstab.

(base)

4.格式化爲xfs文件系統

[root@localhost /]# mkfs.xfs -f /dev/sdb1

5.修改/etc/fstab,然系統自動掛載xfs卷

[root@localhost /]# vi /etc/fstab添加相似
/dev/sdc1               /diskc             xfs     defaults        0 0
/dev/sdb1               /diskb             xfs     defaults        0 0

6.實驗是否掛載成功

[root@localhost ~]# mount /dev/sdb1 /diskb