Ubuntu搭建Http服務器用於下載Ubuntu文件

　　首先安裝Apache

$ sudo apt-get install apache2

　　Apache2的默認訪問端口爲80，當端口被佔用時須要更改其訪問端口

　　進入apache2的安裝目錄  /etc/apache2/，修改器ports.conf文件

# If you just change the port or add more ports here, you will likely also
# have to change the VirtualHost statement in
# /etc/apache2/sites-enabled/000-default.conf

#Listen 80
Listen 8001

<IfModule ssl_module>
        Listen 443
</IfModule>

<IfModule mod_gnutls.c>
        Listen 443
</IfModule>

# vim: syntax=apache ts=4 sw=4 sts=4 sr noet

　　進入 目錄 /etc/apache2/sites-available， 修改000-default.conf文件

#<VirtualHost *:80>
<VirtualHost *:8001>
        # The ServerName directive sets the request scheme, hostname and port that
        # the server uses to identify itself. This is used when creating
        # redirection URLs. In the context of virtual hosts, the ServerName
        # specifies what hostname must appear in the request's Host: header to
        # match this virtual host. For the default virtual host (this file) this
        # value is not decisive as it is used as a last resort host regardless.
        # However, you must set it for any further virtual host explicitly.
        #ServerName www.example.com

        ServerAdmin webmaster@localhost
        DocumentRoot /var/www/html

        # Available loglevels: trace8, ..., trace1, debug, info, notice, warn,
        # error, crit, alert, emerg.
        # It is also possible to configure the loglevel for particular
        # modules, e.g.
        #LogLevel info ssl:warn

        ErrorLog ${APACHE_LOG_DIR}/error.log
        CustomLog ${APACHE_LOG_DIR}/access.log combined

        # For most configuration files from conf-available/, which are
        # enabled or disabled at a global level, it is possible to
        # include a line for only one particular virtual host. For example the
        # following line enables the CGI configuration for this host only
        # after it has been globally disabled with "a2disconf".
        #Include conf-available/serve-cgi-bin.conf
</VirtualHost>

# vim: syntax=apache ts=4 sw=4 sts=4 sr noet

　　而後重啓apache服務器

$ sudo /etc/init.d/apache2 restart

　　apache服務器的默認目錄在/var/www/html，若是想利用http服務器下載文件，須要刪除其index.html文件，而後把文件放在該目錄便可

　　　　 

　　可是點擊之後又出現一個新問題

　　　　

　　　　You don't have permission to access /config on this server，意識到沒有把文件壓縮，它是打開了這個網頁。把文件壓縮就能夠下載了