006-Cobbler批量自動化部署CentOS/Ubuntu/Windows

時間  2019-11-07
標籤 cobbler 批量 自動化 部署 centos ubuntu windows 欄目 測試自動化 简体版
原文   原文鏈接

這是堅持技術寫做計劃（含翻譯）的第6篇，定個小目標999，每週最少2篇。php

本文主要講解經過CentOS7.6 Minimal + Cobbler 自動化安裝CentOS,Ubuntu,Windowshtml

準備

從阿里鏡像站，下載 CentOS-7-x86_64-Minimal-1810.iso 和 ubuntu-16.04.5-desktop-amd64.iso ，使用VMware建立一臺CentOS7的虛擬機。

前端

環境初始化

1.改成阿里源python

# yum源
# 備份系統默認源
[root@localhost ~]# mkdir /etc/yum.repos.d/old && mv /etc/yum.repos.d/C* /etc/yum.repos.d/old/
[root@localhost ~]# yum clean all
# 設置阿里yum源
[root@localhost ~]# curl -o /etc/yum.repos.d/CentOS-Base.repo http://mirrors.aliyun.com/repo/Centos-7.repo
[root@localhost ~]# curl -o /etc/yum.repos.d/epel.repo http://mirrors.aliyun.com/repo/epel-7.repo

# pip源(2.8.4的bug)
[root@localhost ~]# mkdir ~/.pip
[root@localhost ~]# cat > ~/.pip/pip.conf << EOF
[global]
trusted-host=mirrors.aliyun.com
index-url=https://mirrors.aliyun.com/pypi/simple/
EOF
複製代碼

2.配置sshlinux

默認ssh_config啓用了DNS解析，致使每次遠程ssh時都特別慢ios

[root@localhost ~]# sed -i 's%#UseDNS yes%UseDNS no%' /etc/ssh/sshd_config 
複製代碼

3.配置SElinux
若是要在Centos上開啓Cobbler的支持，須要用root用戶運行 setsebool ，注意 -P 參數確保重啓仍然生效。
同時須要配置SELinux上下文規則(CentOS 7 Minimal默認不安裝 semanage )，用於提供引導鏡像。
按照紅帽的5.4的教程，設置不生效，因此，禁用SELinuxgit

#//.. setsebool -P httpd_can_network_connect true
#//.. yum provides semanage
#//.. yum -y install policycoreutils-python.x86_64
#//.. semanage fcontext -a -t public_content_t "/var/lib/tftpboot/.*"
[root@localhost ~]# sed -i '/SELINUX/s/enforcing/disabled/' /etc/selinux/config 
[root@localhost ~]# setenforce 0
複製代碼

4.配置防火牆程序員

# TFTP
[root@localhost ~]# firewall-cmd --zone=public --add-port=69/tcp --permanent
[root@localhost ~]# firewall-cmd --zone=public --add-port=69/udp --permanent

# HTTPD
[root@localhost ~]# firewall-cmd --zone=public --add-port=80/tcp --permanent
[root@localhost ~]# firewall-cmd --zone=public --add-port=443/tcp --permanent

# Cobbler
[root@localhost ~]# firewall-cmd --zone=public --add-port=25150/tcp --permanent
[root@localhost ~]# firewall-cmd --zone=public --add-port=25150/udp --permanent

# Koan 若是未用到，能夠不開放
[root@localhost ~]# firewall-cmd --zone=public --add-port=25151/tcp --permanent

# samba window安裝須要用到samba,不然能夠不開放
[root@localhost ~]# firewall-cmd --zone=public --add-port=139/tcp --permanent
[root@localhost ~]# firewall-cmd --zone=public --add-port=445/tcp --permanent
[root@localhost ~]# firewall-cmd --zone=public --add-port=137/udp --permanent
[root@localhost ~]# firewall-cmd --zone=public --add-port=138/udp --permanent

# 更新防火牆規則
[root@localhost ~]# firewall-cmd --reload

# 查看全部打開的端口
[root@localhost ~]# firewall-cmd --zone=public --list-ports
複製代碼

安裝Cobbler

安裝依賴軟件

[root@localhost ~]# yum install -y cobbler cobbler-web dhcp tftp-server pykickstart httpd xinetd
複製代碼

設置開機自啓動

[root@localhost ~]# systemctl enable httpd
[root@localhost ~]# systemctl enable xinetd
[root@localhost ~]# systemctl enable rsyncd
[root@localhost ~]# systemctl enable tftp
[root@localhost ~]# systemctl enable cobblerd
複製代碼

啓動服務

[root@localhost ~]# systemctl start httpd
[root@localhost ~]# systemctl start xinetd
[root@localhost ~]# systemctl start tftp
[root@localhost ~]# systemctl start cobblerd
複製代碼

檢查配置

[root@localhost ~]# cobbler check
The following are potential configuration items that you may want to fix:

1 : The 'server' field in /etc/cobbler/settings must be set to something other than localhost, or kickstarting features will not work.  This should be a resolvable hostname or IP for the boot server as reachable by all machines that will use it.
2 : For PXE to be functional, the 'next_server' field in /etc/cobbler/settings must be set to something other than 127.0.0.1, and should match the IP of the boot server on the PXE network.
3 : SELinux is enabled. Please review the following wiki page for details on ensuring cobbler works correctly in your SELinux environment:
    https://github.com/cobbler/cobbler/wiki/Selinux
4 : change 'disable' to 'no' in /etc/xinetd.d/tftp
5 : Some network boot-loaders are missing from /var/lib/cobbler/loaders, you may run 'cobbler get-loaders' to download them, or, if you only want to handle x86/x86_64 netbooting, you may ensure that you have installed a *recent* version of the syslinux package installed and can ignore this message entirely.  Files in this directory, should you want to support all architectures, should include pxelinux.0, menu.c32, elilo.efi, and yaboot. The 'cobbler get-loaders' command is the easiest way to resolve these requirements.
6 : debmirror package is not installed, it will be required to manage debian deployments and repositories
7 : The default password used by the sample templates for newly installed machines (default_password_crypted in /etc/cobbler/settings) is still set to 'cobbler' and should be changed, try: "openssl passwd -1 -salt 'random-phrase-here' 'your-password-here'" to generate new one
8 : fencing tools were not found, and are required to use the (optional) power management features. install cman or fence-agents to use them

Restart cobblerd and then run 'cobbler sync' to apply changes.
複製代碼

1,2：
cobbler_ip 爲cobbler主機ip
next_server 是dhcp主機ip，可是本實驗dhcp和cobbler是一臺github

[root@localhost ~]# export cobbler_ip=192.168.0.12
[root@localhost ~]# sed -i "s%^server: 127.0.0.1%server: ${cobbler_ip}%g" /etc/cobbler/settings
[root@localhost ~]# sed -i "s%^next_server: 127.0.0.1%next_server: ${cobbler_ip}%g" /etc/cobbler/settings
複製代碼

3： 能夠忽略，由於已經配置SELinux和防火牆了web

4：開啓tftp功能

[root@localhost ~]# sed -i '/disable\>/s/\<yes\>/no/' /etc/xinetd.d/tftp
複製代碼

5：下載bootload

[root@localhost ~]# cobbler get-loaders
複製代碼

6：下載ubuntu本地包鏡像（不裝ubuntu的，能夠不用改）

[root@localhost ~]# yum install -y debmirror
[root@localhost ~]# sed -i 's%^@dists="sid"%#@dists="sid"%g;s%@arches="i386"%#@arches="i386"%g' /etc/debmirror.conf
複製代碼

7：設置安裝系統後的root密碼

[root@localhost ~]# export root_pwd=$(openssl passwd -1 -salt `openssl rand 15 -base64` 'Abcd1234!@#$')
[root@localhost ~]# sed -i "s%^default_password_crypted.*%default_password_crypted: \"${root_pwd}\"%g" /etc/cobbler/settings
複製代碼

8：電源管理模塊(非必選)，cman和ence-agents二選一便可,此處忽略

其他修改：

[root@localhost ~]# sed -i "s%manage_dhcp: 0%manage_dhcp: 1%g" /etc/cobbler/settings
[root@localhost ~]# sed -i "s%pxe_just_once: 0%pxe_just_once: 1%g" /etc/cobbler/settings
複製代碼

修改dhcp

[root@localhost ~]# vim /etc/cobbler/dhcp.template
\#僅列出修改過的部分
\......
subnet 192.168.0.0 netmask 255.255.255.0 {
     option routers             192.168.0.1;
     option domain-name-servers 192.168.0.1;
     option subnet-mask         255.255.255.0;
     range dynamic-bootp        192.168.0.100 192.168.0.200;
\......
複製代碼

重啓服務

[root@localhost ~]# systemctl restart httpd
[root@localhost ~]# systemctl restart xinetd
[root@localhost ~]# systemctl restart tftp
[root@localhost ~]# systemctl restart cobblerd
複製代碼

再次校驗,發現只有兩條信息了，忽略便可。

[root@localhost ~]# cobbler check
The following are potential configuration items that you may want to fix:

1 : SELinux is enabled. Please review the following wiki page for details on ensuring cobbler works correctly in your SELinux environment:
    https://github.com/cobbler/cobbler/wiki/Selinux
2 : fencing tools were not found, and are required to use the (optional) power management features. install cman or fence-agents to use them

Restart cobblerd and then run 'cobbler sync' to apply changes.
複製代碼

執行 cobbler sync 同步信息

[root@localhost ~]# cobbler sync
task started: 2019-02-22_184309_sync
task started (id=Sync, time=Fri Feb 22 18:43:09 2019)
running pre-sync triggers
# ....忽略
running python trigger cobbler.modules.scm_track
running shell triggers from /var/lib/cobbler/triggers/change/*
*** TASK COMPLETE ***
複製代碼

cobbler-web

修復2.8.4 bug

打開 https://${cobbler_ip}/cobbler_web 注意是 https 可是2.8.4有個bug，會致使打開後報500 Internal Server Error 錯誤 ,是由於  django 版本過高了 (參加 cobbler 2.8.4/2.8.0 on centos 7 error )

[root@localhost ~]# yum install -y python-pip
[root@localhost ~]# pip2.7 install -U django==1.9.13
[root@localhost ~]# systemctl restart cobblerd
複製代碼

設置用戶名密碼

默認用戶名密碼是 cobbler/cobbler

[root@localhost ~]# htdigest -c /etc/cobbler/users.digest Cobbler cobbler # 後邊這個是用戶名
[root@localhost ~]# systemctl restart cobblerd
複製代碼

再次打開 https://${cobbler_ip}/cobbler_web 

image.png

掛載鏡像

經過 winscp,mobaxterm等將ubuntu和centos鏡像上傳到Cobbler服務器上的 /tmp/ 目錄下,其中 net.ifnames=0 biosdevname=0 noipv6 是讓網卡統一命名成 eth0

[root@localhost ~]# mount -t iso9660 -o loop /tmp/CentOS-7-x86_64-Minimal-1810.iso /mnt/
[root@localhost ~]# cobbler import --name=CentOS-7.6.1810-x86_64 --path=/mnt/ --arch=x86_64
[root@localhost ~]# cobbler profile edit --name=CentOS-7.6.1810-x86_64 --kopts='net.ifnames=0 biosdevname=0'
[root@localhost ~]# mount -t iso9660 -o loop /tmp/ubuntu-16.04.5-server-amd64.iso /mnt/
[root@localhost ~]# cobbler import --name=ubuntu-16.04.5-server-x86_64 --path=/mnt/ --arch=x86_64
複製代碼

測試PXE安裝系統

在vmware建立兩個虛擬機(選擇空白盤),內存2G，CPU2核，磁盤20G，建立完後，記得打個快照，後邊作實驗失敗後，直接恢復便可。

image.png

選擇CentOS，而後回車，系統將自動安裝

優化配置

CentOS ks

[root@localhost ~]# cobbler profile report --name CentOS-7.6.1810-x86_64
Name                           : CentOS-7.6.1810-x86_64
#//...忽略
Kickstart                      : /var/lib/cobbler/kickstarts/sample_end.ks
#//...忽略
#//複製一份ks，而且進行修改
[root@localhost ~]# cp /var/lib/cobbler/kickstarts/sample_end.ks /var/lib/cobbler/kickstarts/centos-7-6.ks
[root@localhost ~]# cobbler profile edit --name CentOS-7.6.1810-x86_64 --kickstart=/var/lib/cobbler/kickstarts/centos-7-6.ks
[root@localhost ~]# cp /var/lib/cobbler/kickstarts/sample.seed /var/lib/cobbler/kickstarts/ubuntu-16-4-5.seed
[root@localhost ~]# cobbler profile edit --name ubuntu-16.04.5-server-x86_64 --kickstart=/var/lib/cobbler/kickstarts/ubuntu-16-4-5.seed 
複製代碼

具體CentOS的ks語法能夠參考這裏：KICKSTART 語法參考。另外能夠參考 運維工做筆記-Cobbler 配置文件
具體Ubuntu的Preseed能夠參考這裏：Preseed語法參考。


吐槽一下，cobbler代碼中檢測到是ubuntu時，會自動將ks換成url(強制走preseed)，而用慣了ks的，用preseed仍是很不習慣的，能夠看一下 Support selection of automatic installation file format in distros which allow it (Debian/Ubuntu allows kickstart and preseed) 和 Problems Provisioning Ubuntu with Cobbler and Kickstart Profiles
此處貼一下 /var/lib/cobbler/kickstarts/ubuntu-16-4-5.seed

# Mostly based on the Ubuntu installation guide
# https://help.ubuntu.com/16.04/installation-guide/
# Debian sample
# https://www.debian.org/releases/stable/example-preseed.txt

## Part 1. Localization

# Preseeding only locale sets language, country and locale.
d-i debian-installer/locale string en_US

# Keyboard selection.
# Disable automatic (interactive) keymap detection.
d-i console-setup/ask_detect boolean false
d-i keyboard-configuration/toggle select No toggling
d-i keyboard-configuration/layoutcode string us
d-i keyboard-configuration/variantcode string

## Part 2. Network configuration
# netcfg will choose an interface that has link if possible. This makes it
# skip displaying a list if there is more than one interface.
#set $myhostname = $getVar('hostname',$getVar('name','cobbler')).replace("_","-")
d-i netcfg/choose_interface select auto
d-i netcfg/get_hostname string $myhostname

# If non-free firmware is needed for the network or other hardware, you can
# configure the installer to always try to load it, without prompting. Or
# change to false to disable asking.
# d-i hw-detect/load_firmware boolean true

## Part 3 NTP/Time
# NTP/Time Setup
d-i time/zone string Asia/Shanghai
d-i clock-setup/utc boolean true
d-i clock-setup/ntp boolean true
d-i clock-setup/ntp-server  string ntp1.aliyun.com

## Part 4. Mirror settings
# Setup the installation source
d-i mirror/country string manual
d-i mirror/http/hostname string $http_server
d-i mirror/http/directory string $install_source_directory
d-i mirror/http/proxy string

#set $os_v = $getVar('os_version','')
#if $breed == "ubuntu" and $os_v and ($os_v.lower()[0] > 'p' or $os_v.lower()[0] < 'd')
# Required at least for ubuntu 12.10+ , so test os_v is higher than precise and lower than drapper
d-i live-installer/net-image string http://$http_server/cobbler/links/$distro_name/install/filesystem.squashfs
#end if

# Suite to install.
# d-i mirror/suite string precise
# d-i mirror/udeb/suite string precise

# Components to use for loading installer components (optional).
#d-i mirror/udeb/components multiselect main, restricted

## Part 4. Partitioning

# Disk Partitioning
# Use LVM, and wipe out anything that already exists
d-i partman/choose_partition select finish
d-i partman/confirm boolean true
d-i partman/confirm_nooverwrite boolean true
d-i partman-auto/method string lvm
d-i partman-lvm/device_remove_lvm boolean true
d-i partman-lvm/confirm boolean true
d-i partman-lvm/confirm_nooverwrite boolean true
d-i partman-md/device_remove_md boolean true
d-i partman-partitioning/confirm_write_new_label boolean true

# You can choose one of the three predefined partitioning recipes:
# - atomic: all files in one partition
# - home: separate /home partition
# - multi: separate /home, /usr, /var, and /tmp partitions
d-i partman-auto/choose_recipe select atomic

# If you just want to change the default filesystem from ext3 to something
# else, you can do that without providing a full recipe.
# d-i partman/default_filesystem string ext4

## Part 5. Account setup

# root account and password
d-i passwd/root-login boolean true
d-i passwd/root-password-crypted password $default_password_crypted

# skip creation of a normal user account.
d-i passwd/make-user boolean true
d-i passwd/user-fullname  string anjia
d-i passwd/username       string anjia
d-i passwd/user-password-crypted password $default_password_crypted

## Part 6. Apt setup

# You can choose to install restricted and universe software, or to install
# software from the backports repository.
# d-i apt-setup/restricted boolean true
# d-i apt-setup/universe boolean true
# d-i apt-setup/backports boolean true

# Uncomment this if you don't want to use a network mirror.
# d-i apt-setup/use_mirror boolean true

# Select which update services to use; define the mirrors to be used.
# Values shown below are the normal defaults.
# d-i apt-setup/services-select multiselect security
# d-i apt-setup/security_host string mirrors.aliyun.com
# d-i apt-setup/security_path string /ubuntu

$SNIPPET('preseed_apt_repo_config')

# Enable deb-src lines
# d-i apt-setup/local0/source boolean true

# URL to the public key of the local repository; you must provide a key or
# apt will complain about the unauthenticated repository and so the
# sources.list line will be left commented out
# d-i apt-setup/local0/key string http://local.server/key

# By default the installer requires that repositories be authenticated
# using a known gpg key. This setting can be used to disable that
# authentication. Warning: Insecure, not recommended.
# d-i debian-installer/allow_unauthenticated boolean true

## Part 7. Package selection
# Default for minimal
tasksel tasksel/first multiselect standard
# Default for server
# tasksel tasksel/first multiselect standard, web-server
# Default for gnome-desktop
# tasksel tasksel/first multiselect standard, gnome-desktop

# Individual additional packages to install
# wget is REQUIRED otherwise quite a few things won't work
# later in the build (like late-command scripts)
d-i pkgsel/include string ntp ssh wget 

# Debian needs this for the installer to avoid any question for grub
# Please verify that it suit your needs as it may overwrite any usb stick
#if $breed == "debian"
d-i grub-installer/grub2_instead_of_grub_legacy boolean true
d-i grub-installer/bootdev string default
#end if

# Use the following option to add additional boot parameters for the
# installed system (if supported by the bootloader installer).
# Note: options passed to the installer will be added automatically.
d-i debian-installer/add-kernel-opts string $kernel_options_post

# Avoid that last message about the install being complete.
d-i finish-install/reboot_in_progress note

## Figure out if we're kickstarting a system or a profile
#if $getVar('system_name','') != ''
#set $what = "system"
#else
#set $what = "profile"
#end if

# This first command is run as early as possible, just after preseeding is read.
# d-i preseed/early_command string [command]
d-i preseed/early_command string wget -O- \
   http://$http_server/cblr/svc/op/script/$what/$name/?script=preseed_early_default | \
   /bin/sh -s

# This command is run immediately before the partitioner starts. It may be
# useful to apply dynamic partitioner preseeding that depends on the state
# of the disks (which may not be visible when preseed/early_command runs).
# d-i partman/early_command \
# string debconf-set partman-auto/disk "\$(list-devices disk | head -n1)"

# This command is run just before the install finishes, but when there is
# still a usable /target directory. You can chroot to /target and use it
# directly, or use the apt-install and in-target commands to easily install
# packages and run commands in the target system.
# d-i preseed/late_command string [command]
d-i preseed/late_command string wget -O- \
   http://$http_server/cblr/svc/op/script/$what/$name/?script=preseed_late_default | \
   chroot /target /bin/sh -s
複製代碼

建立snippets

安裝完後，自動安裝軟件,參考 Using template scripts for Debian and Ubuntu seeds

[root@localhost ~]# tee /var/lib/cobbler/snippets/ubuntu_apt_install_soft <<-'EOF'

apt-get update
apt-get install -y language-pack-zh-hans apt-transport-https ca-certificates software-properties-common  git ansible openssh-server vim curl htop iotop iftop ncdu

curl -fsSL http://mirrors.aliyun.com/docker-ce/linux/ubuntu/gpg | sudo apt-key add -
sudo add-apt-repository "deb [arch=amd64] http://mirrors.aliyun.com/docker-ce/linux/ubuntu $(lsb_release -cs) stable"
apt-get update

apt-get install -y docker-ce=18.06.2~ce~3-0~ubuntu
apt-mark hold docker-ce
systemctl enable docker
EOF

## // d-i preseed/late_command 階段執行
[root@localhost ~]# echo '$SNIPPET("ubuntu_apt_install_soft") >> /var/lib/cobbler/snippets/late_apt_repo_config
複製代碼

設置ubuntu package repo

[root@localhost ~]# cobbler repo add --name=ubuntu-16.04.5-server-x86_64 --arch=x86_64 --breed=apt --mirror=http://mirrors.aliyun.com/ubuntu --owners=admin --mirror-locally=False --apt-components='main universe' --apt-dists='xenial xenial-updates xenial-security'
[root@localhost ~]# cobbler profile edit --name=ubuntu-16.04.5-server-x86_64 --repos=ubuntu-16.04.5-server-x86_64
複製代碼

限於篇幅，下一篇，將介紹Cobbler安裝Windows

常見錯誤

[root@localhost ~]# cobbler check
cobblerd does not appear to be running/accessible: error(111, 'Connection refused') 
複製代碼

緣由：未啓動相關服務

[root@localhost ~]# cobbler check
httpd does not appear to be running and proxying cobbler, or SELinux is in the way. Original traceback:
Traceback (most recent call last):
  File "/usr/lib/python2.7/site-packages/cobbler/cli.py", line 251, in check_setup
    s.ping()
  File "/usr/lib64/python2.7/xmlrpclib.py", line 1233, in __call__
    return self.__send(self.__name, args)
  File "/usr/lib64/python2.7/xmlrpclib.py", line 1591, in __request
    verbose=self.__verbose
  File "/usr/lib64/python2.7/xmlrpclib.py", line 1273, in request
    return self.single_request(host, handler, request_body, verbose)
  File "/usr/lib64/python2.7/xmlrpclib.py", line 1321, in single_request
    response.msg,
ProtocolError: <ProtocolError for 127.0.0.1:80/cobbler_api: 503 Service Unavailable>
複製代碼

未關閉防火牆

[root@localhost ~]# cobbler sync
received on stderr: Redirecting to /bin/systemctl restart dhcpd.service
Job for dhcpd.service failed because the control process exited with error code. See "systemctl status dhcpd.service" and "journalctl -xe" for details.

Exception occured: <class 'cobbler.cexceptions.CX'>
Exception value: 'cobbler trigger failed: cobbler.modules.sync_post_restart_services'
Exception Info:
  File "/usr/lib/python2.7/site-packages/cobbler/remote.py", line 82, in run
    rc = self._run(self)
   File "/usr/lib/python2.7/site-packages/cobbler/remote.py", line 181, in runner
    return self.remote.api.sync(self.options.get("verbose",False),logger=self.logger)
   File "/usr/lib/python2.7/site-packages/cobbler/api.py", line 763, in sync
    return sync.run()
   File "/usr/lib/python2.7/site-packages/cobbler/action_sync.py", line 144, in run
    utils.run_triggers(self.api, None, "/var/lib/cobbler/triggers/sync/post/*", logger=self.logger)
   File "/usr/lib/python2.7/site-packages/cobbler/utils.py", line 928, in run_triggers
    raise CX("cobbler trigger failed: %s" % m.__name__)

!!! TASK FAILED !!!
複製代碼

沒改dhcp模板，致使sync同步出問題

[root@localhost ~]# cat /var/log/httpd/ssl_error_log
[Fri Feb 22 20:07:49.460442 2019] [:error] [pid 6910] [remote 127.0.0.1:204] mod_wsgi (pid=6910): Exception occurred processing WSGI script '/usr/share/cobbler/web/cobbler.wsgi'.
[Fri Feb 22 20:07:49.460559 2019] [:error] [pid 6910] [remote 127.0.0.1:204] Traceback (most recent call last):
[Fri Feb 22 20:07:49.460605 2019] [:error] [pid 6910] [remote 127.0.0.1:204]   File "/usr/share/cobbler/web/cobbler.wsgi", line 26, in application
[Fri Feb 22 20:07:49.460668 2019] [:error] [pid 6910] [remote 127.0.0.1:204]     _application = get_wsgi_application()
[Fri Feb 22 20:07:49.460684 2019] [:error] [pid 6910] [remote 127.0.0.1:204]   File "/usr/lib/python2.7/site-packages/django/core/wsgi.py", line 13, in get_wsgi_application
[Fri Feb 22 20:07:49.460723 2019] [:error] [pid 6910] [remote 127.0.0.1:204]     django.setup(set_prefix=False)
[Fri Feb 22 20:07:49.460737 2019] [:error] [pid 6910] [remote 127.0.0.1:204]   File "/usr/lib/python2.7/site-packages/django/__init__.py", line 22, in setup
[Fri Feb 22 20:07:49.460768 2019] [:error] [pid 6910] [remote 127.0.0.1:204]     configure_logging(settings.LOGGING_CONFIG, settings.LOGGING)
[Fri Feb 22 20:07:49.460781 2019] [:error] [pid 6910] [remote 127.0.0.1:204]   File "/usr/lib/python2.7/site-packages/django/conf/__init__.py", line 56, in __getattr__
[Fri Feb 22 20:07:49.460812 2019] [:error] [pid 6910] [remote 127.0.0.1:204]     self._setup(name)
[Fri Feb 22 20:07:49.460824 2019] [:error] [pid 6910] [remote 127.0.0.1:204]   File "/usr/lib/python2.7/site-packages/django/conf/__init__.py", line 41, in _setup
[Fri Feb 22 20:07:49.460852 2019] [:error] [pid 6910] [remote 127.0.0.1:204]     self._wrapped = Settings(settings_module)
[Fri Feb 22 20:07:49.460871 2019] [:error] [pid 6910] [remote 127.0.0.1:204]   File "/usr/lib/python2.7/site-packages/django/conf/__init__.py", line 110, in __init__
[Fri Feb 22 20:07:49.460900 2019] [:error] [pid 6910] [remote 127.0.0.1:204]     mod = importlib.import_module(self.SETTINGS_MODULE)
[Fri Feb 22 20:07:49.460911 2019] [:error] [pid 6910] [remote 127.0.0.1:204]   File "/usr/lib64/python2.7/importlib/__init__.py", line 37, in import_module
[Fri Feb 22 20:07:49.460953 2019] [:error] [pid 6910] [remote 127.0.0.1:204]     __import__(name)
[Fri Feb 22 20:07:49.460973 2019] [:error] [pid 6910] [remote 127.0.0.1:204]   File "/usr/share/cobbler/web/settings.py", line 89, in <module>
[Fri Feb 22 20:07:49.460995 2019] [:error] [pid 6910] [remote 127.0.0.1:204]     from django.conf.global_settings import TEMPLATE_CONTEXT_PROCESSORS
[Fri Feb 22 20:07:49.461043 2019] [:error] [pid 6910] [remote 127.0.0.1:204] ImportError: cannot import name TEMPLATE_CONTEXT_PROCESSORS
複製代碼

pip2.7 install -U django==1.9.13

參考資料

招聘小廣告

山東濟南的小夥伴歡迎投簡歷啊 加入咱們 , 一塊兒搞事情。

長期招聘，Java程序員，大數據工程師，運維工程師，前端工程師。

相關文章
相關標籤/搜索
每日一句
    每一个你不满意的现在，都有一个你没有努力的曾经。
本站公眾號
   歡迎關注本站公眾號,獲取更多信息
聯繫我們 最近搜索 最新文章 沪ICP备13005482号-10 MyBatis教程 SQL 教程 MySQL教程 Java 教程 Thymeleaf 教程 Hibernate教程 Spring教程 Redis教程